can be added the RGB led strip support, like it is on QMK firmware (TMK based)? https://github.com/jackhumbert/qmk_firmware#rgb-under-glow-mod
Having a small issue with this, everything works perfectly as according to this image with the exception of the pipe/backslash key. It performs the same action as #/~ which I have next to my enter key.Please write that key in the format according to http://tkg.io/#helpShow Image(http://i.imgur.com/cQl49DF.png)
Awesome job to everyone getting this up and running. Have used it to flash an RS68 II+ with great success :thumb:Thank you. I'm glad you like it.
I am wondering about the Backlight action settings for a function key. Currently it looks like I need to assign dedicated switches to use these, unless I've overlooked a setting somewhere... Is it possible to assign Backlight action - Toggle to layer 1?
As an example using the following keyboard layout http://www.keyboard-layout-editor.com/#/gists/a622fd495ec3e1a1f402b1572e0d5cf7 (http://www.keyboard-layout-editor.com/#/gists/a622fd495ec3e1a1f402b1572e0d5cf7), I'd like the Return key to toggle the backlight if I press it while holding down Fn0.
Awesome job to everyone getting this up and running. Have used it to flash an RS68 II+ with great success :thumb:Thank you. I'm glad you like it.
I am wondering about the Backlight action settings for a function key. Currently it looks like I need to assign dedicated switches to use these, unless I've overlooked a setting somewhere... Is it possible to assign Backlight action - Toggle to layer 1?
As an example using the following keyboard layout http://www.keyboard-layout-editor.com/#/gists/a622fd495ec3e1a1f402b1572e0d5cf7 (http://www.keyboard-layout-editor.com/#/gists/a622fd495ec3e1a1f402b1572e0d5cf7), I'd like the Return key to toggle the backlight if I press it while holding down Fn0.
Regarding your question, off course it's possible. I have fixed your layout for you. I hope you can get hint or inspiration from it.
http://www.keyboard-layout-editor.com/#/gists/5ee80c7cadc91f8420efe69c1cd4764f
Following on from my previous question regarding nested function layers, which works spectacularly well btw...i tested this question on my tkg based keyboard, but i don't got this problem.
I have a minor problem on my RS68II+, where it seems that holding down shift-option-left or shift-option-right only registers as shift-left and shift-right. Normally this would be highlight word left or right, but instead is highlight next letter left or right. I'm using the following layout to feed into tkg.io:
http://www.keyboard-layout-editor.com/#/gists/a622fd495ec3e1a1f402b1572e0d5cf7 (http://www.keyboard-layout-editor.com/#/gists/a622fd495ec3e1a1f402b1572e0d5cf7)
Any ideas on how to fix this?
Thanks a lot for this, it seems very simple and useful for beginners like me :)
I'm trying a simple Norwegian layout (http://www.keyboard-layout-editor.com/#/gists/e0d8b328f5de3e1f594f827893258757), but TKG.io doesn't recognize æ/ø/å ("Unknown label").
What should I use instead?
I'm not sure if this or the TMK thread is the correct place for this, but here it goes.
I have an ISO 60% GH60 "Satan" keyboard, with TMK firmware.
Everything is working great, except the key between the left shift and Z (ISO-only key), which is putting out "'" (apostrophe) and "*" instead of the correct characters (which would actually be "<" and ">" on a Norwegian layout).
I have loaded the default ISO layout, which labels this key with "\ |" (on Norwegian keyboards it's labelled "< >").
I have fixed temporarily it by setting the key to a function key, and manually setting that to "Non-US \ and |":Show Image(http://i.imgur.com/UePgVKq.png)
But that is a bit of a hassle. Is there any label for this key which is recognized by tkg.io?
Thanks.
Here is one example that how I use TKG. It is a complex one and you can see what TKG can do.
My Keyboard layout:http://www.keyboard-layout-editor.com/#/gists/bf8248eb6dd0416ecf2dbdf18b5ad4a0More
One tip:
You can export your fn settings and save them to Keyboard Properties of Keyboard-Layout-Editor.
Next time when you use tkg, just import them.More
hi, I can see on your screenshot that you are using macro. Can you explain me how to use these custom macro?
I installed the TKG on my private hosting, I check the json file to add macro, I dont see how to add. and I cannot use chrome addon with my own hosting, how to use it?Here is one example that how I use TKG. It is a complex one and you can see what TKG can do.
My Keyboard layout:http://www.keyboard-layout-editor.com/#/gists/bf8248eb6dd0416ecf2dbdf18b5ad4a0More
One tip:
You can export your fn settings and save them to Keyboard Properties of Keyboard-Layout-Editor.
Next time when you use tkg, just import them.More
[{y:0.5,a:0},"Esc\n\n\n\npower","F1\n\n\n\nfn1","F2\n\n\n\nfn2","F3\n\n\n\nfn3","F4\n\n\n\nfn4",{a:4},"F5","F6","F7","F8",{a:0},"F9\n\n\n\nfn12","F10\n\n\n\nfn16","F11\n\n\n\nfn20","F12\n\n\n\nfn24",{a:4},"PrtSc","Pause\nBreak","scroll lock","Home","PgUp",{a:0},"PgDn\n\n\n\nsleep"],
["~\n`\n\n\nfn8","!\n1\n\n\nfn5","@\n2\n\n\nfn9","#\n3\n\n\nfn13","$\n4\n\n\nfn17","%\n5\n\n\nfn21",{a:4},"^\n6","&\n7","*\n8",{a:0},"(\n9\n\n\nfn1",")\n0\n\n\nfn2","_\n-\n\n\nfn3","+\n=\n\n\nfn4",{w:2},"Backspace\n\n\n\ndelete",{a:4},"Num Lock","/","*","-"],
[{w:1.5},"Tab",{a:0},"Q\n\n\n\nfn6","W\n\n\n\nfn10","E\n\n\n\nfn14","R\n\n\n\nfn18","T\n\n\n\nfn22",{a:4},"Y","U","I",{a:0},"O\n\n\n\nfn12","P\n\n\n\nfn16","{\n[\n\n\nfn20","}\n]\n\n\nfn24",{a:4,w:1.5},"|\n\\","7\nHome",{a:0},"8\n?\n\n\nvolup",{a:4},"9\nPgUp",{h:2},"+"],
[{w:1.25,w2:1.75,l:true},"Caps Lock",{x:0.5,a:0},"A\n\n\n\nfn7","S\n\n\n\nfn11","D\n\n\n\nfn15","F\n\n\n\nfn19","G\n\n\n\nfn23",{a:4},"H","J","K",{a:0},"L\n\n\n\nbutton1",":\n;\n\n\nbutton2","\"\n'\n\n\nbutton3",{a:4,w:2.25},"Enter",{a:0},"4\n?\n\n\nprev","5\n\n\n\nplay","6\n?\n\n\nnext"],
[{a:4,w:2.25},"Shift","Z","X",{a:0},"C\n\n\n\ncalc",{a:4},"V","B","N",{a:0},"M\n\n\n\nmail","<\n,\n\n\naccel0",">\n.\n\n\naccel1","?\n/\n\n\naccel2",{a:4,w:1.75},"Shift",{a:0},"?\n\n\n\nmouseup",{a:4},"1\nEnd",{a:0},"2\n?\n\n\nvoldown",{a:4},"3\nPgDn",{h:2},"Enter"],
[{w:1.5},"Ctrl",{a:0,w:1.5},"Win\n\n\n\nmycomp",{a:4,w:7},"space",{w:1.5},"Alt",{w:1.5},"fn0",{a:0},"?\n\n\n\nmouseleft","?\n\n\n\nmousedown","?\n\n\n\nmouseright",{a:4},"0\nIns",{a:0},".\nDel\n\n\nmute"]
Any chance we can get some more information on the errors TKG gives, please?This is yours.
For example, does 'No matching key' mean that you're trying to remap a key that doesnt exist, or that the TKG doesn't recognise the value you're wanting to remap to?
(It's giving me this error on a number of keys on my number pad, for instance)
I was using the following configuration:Code: [Select][{y:0.5,a:0},"Esc\n\n\n\npower","F1\n\n\n\nfn1","F2\n\n\n\nfn2","F3\n\n\n\nfn3","F4\n\n\n\nfn4",{a:4},"F5","F6","F7","F8",{a:0},"F9\n\n\n\nfn12","F10\n\n\n\nfn16","F11\n\n\n\nfn20","F12\n\n\n\nfn24",{a:4},"PrtSc","Pause\nBreak","scroll lock","Home","PgUp",{a:0},"PgDn\n\n\n\nsleep"],
["~\n`\n\n\nfn8","!\n1\n\n\nfn5","@\n2\n\n\nfn9","#\n3\n\n\nfn13","$\n4\n\n\nfn17","%\n5\n\n\nfn21",{a:4},"^\n6","&\n7","*\n8",{a:0},"(\n9\n\n\nfn1",")\n0\n\n\nfn2","_\n-\n\n\nfn3","+\n=\n\n\nfn4",{w:2},"Backspace\n\n\n\ndelete",{a:4},"Num Lock","/","*","-"],
[{w:1.5},"Tab",{a:0},"Q\n\n\n\nfn6","W\n\n\n\nfn10","E\n\n\n\nfn14","R\n\n\n\nfn18","T\n\n\n\nfn22",{a:4},"Y","U","I",{a:0},"O\n\n\n\nfn12","P\n\n\n\nfn16","{\n[\n\n\nfn20","}\n]\n\n\nfn24",{a:4,w:1.5},"|\n\\","7\nHome",{a:0},"8\n?\n\n\nvolup",{a:4},"9\nPgUp",{h:2},"+"],
[{w:1.25,w2:1.75,l:true},"Caps Lock",{x:0.5,a:0},"A\n\n\n\nfn7","S\n\n\n\nfn11","D\n\n\n\nfn15","F\n\n\n\nfn19","G\n\n\n\nfn23",{a:4},"H","J","K",{a:0},"L\n\n\n\nbutton1",":\n;\n\n\nbutton2","\"\n'\n\n\nbutton3",{a:4,w:2.25},"Enter",{a:0},"4\n?\n\n\nprev","5\n\n\n\nplay","6\n?\n\n\nnext"],
[{a:4,w:2.25},"Shift","Z","X",{a:0},"C\n\n\n\ncalc",{a:4},"V","B","N",{a:0},"M\n\n\n\nmail","<\n,\n\n\naccel0",">\n.\n\n\naccel1","?\n/\n\n\naccel2",{a:4,w:1.75},"Shift",{a:0},"?\n\n\n\nmouseup",{a:4},"1\nEnd",{a:0},"2\n?\n\n\nvoldown",{a:4},"3\nPgDn",{h:2},"Enter"],
[{w:1.5},"Ctrl",{a:0,w:1.5},"Win\n\n\n\nmycomp",{a:4,w:7},"space",{w:1.5},"Alt",{w:1.5},"fn0",{a:0},"?\n\n\n\nmouseleft","?\n\n\n\nmousedown","?\n\n\n\nmouseright",{a:4},"0\nIns",{a:0},".\nDel\n\n\nmute"]
I'm basically just wanting to change a few keys and add a function layer to the 6.25u-spacebar/arrow keys layout.
[{y:0.5,a:0},"Esc\n\n\n\npower","F1\n\n\n\nfn1","F2\n\n\n\nfn2","F3\n\n\n\nfn3","F4\n\n\n\nfn4",{a:4},"F5","F6","F7","F8",{a:0},"F9\n\n\n\nfn12","F10\n\n\n\nfn16","F11\n\n\n\nfn20","F12\n\n\n\nfn24",{a:4},"PrtSc","Pause\nBreak","scroll lock","Home","PgUp",{a:0},"PgDn\n\n\n\nsleep"],
["~\n`\n\n\nfn8","!\n1\n\n\nfn5","@\n2\n\n\nfn9","#\n3\n\n\nfn13","$\n4\n\n\nfn17","%\n5\n\n\nfn21",{a:4},"^\n6","&\n7","*\n8",{a:0},"(\n9\n\n\nfn1",")\n0\n\n\nfn2","_\n-\n\n\nfn3","+\n=\n\n\nfn4",{w:2},"Backspace\n\n\n\ndelete",{a:4},"Num Lock","/","*","-"],
[{w:1.5},"Tab",{a:0},"Q\n\n\n\nfn6","W\n\n\n\nfn10","E\n\n\n\nfn14","R\n\n\n\nfn18","T\n\n\n\nfn22",{a:4},"Y","U","I",{a:0},"O\n\n\n\nfn12","P\n\n\n\nfn16","{\n[\n\n\nfn20","}\n]\n\n\nfn24",{a:4,w:1.5},"|\n\\","7\nHome","8\n↑","9\nPgUp",{h:2},"+"],
[{w:1.25,w2:1.75,l:true},"Caps Lock",{x:0.5,a:0},"A\n\n\n\nfn7","S\n\n\n\nfn11","D\n\n\n\nfn15","F\n\n\n\nfn19","G\n\n\n\nfn23",{a:4},"H","J","K",{a:0},"L\n\n\n\nbutton1",":\n;\n\n\nbutton2","\"\n'\n\n\nbutton3",{a:4,w:2.25},"Enter","4\n←",{a:0},"5\n\n\n\nplay",{a:4},"6\n→"],
[{w:2.25},"Shift","Z","X",{a:0},"C\n\n\n\ncalc",{a:4},"V","B","N",{a:0},"M\n\n\n\nmail","<\n,\n\n\naccel0",">\n.\n\n\naccel1","?\n/\n\n\naccel2",{a:4,w:1.75},"Shift",{a:0},"↑\n\n\n\nmouseup",{a:4},"1\nEnd","2\n↓","3\nPgDn",{h:2},"Enter"],
[{w:1.5},"Ctrl",{a:0,w:1.5},"Win\n\n\n\nmycomp",{a:4,w:7},"space",{w:1.5},"Alt",{w:1.5},"fn0",{a:0},"←\n\n\n\nmouseleft","↓\n\n\n\nmousedown","→\n\n\n\nmouseright",{a:4},"0\nIns",{a:0},".\nDel\n\n\nmute"]
Doesn't look like the EEPW84 is supported by TKG. This (https://drive.google.com/file/d/0B36cphsDCP8Zc3RvLWItQ2lVdVE/view?usp=sharing) seems to be the official tool.
Those instructions are the ones I used and in that Word document TKG is used (see point 3.)?I didn't notice there were other pages in that file. Anyway it works for me. Have you made sure you set your board to Kimera and config to XD84?
You can reflash the board if necessary right?Yes. As many times as you want (technically not quite so but take it for good).
So I can try take those backlight FN commands out, just like the LED tab and try it out?Surely.
I tried flashing the XD84 and process says file is burned succesfully but when I reconnect the board no key registers. I Don't understand what I'm doing wrong. I have to reflash the board through tkg toolkit so it starts registering keys again but then the layout isn't what I want. Anybody have any suggestions or tips for me? This is the raw data I'm trying to flash:
["Esc\n\n\n\nFn9","F1","F2","F3","F4","F5","F6","F7","F8","F9","F10","F11","F12","Print","Pause","Delete"],
["~\n`","!\n1","@\n2","#\n3","$\n4","%\n5","^\n6","&\n7","*\n8","(\n9",")\n0","_\n-","+\n=",{w:2},"Backspace","Insert"],
[{w:1.5},"Tab","Q","W","E","R","T","Y","U","I","O","P","{\n[","}\n]",{w:1.5},"|\n\\","Fn0"],
[{w:1.75},"Caps Lock","A","S","D","F","G","H","J","K","L",":\n;","\"\n'",{w:2.25},"Enter","Page Up"],
[{w:2.25},"Shift","Z","X","C\n\n\n\nFn2","V\n\n\n\nFn1","B\n\n\n\nFn3","N","M","<\n,",">\n.","?\n/",{w:1.75},"RShift","↑\n\n\n\nFn7","Page Down\n\n\n\nFn4"],
[{w:1.25},"Ctrl",{w:1.25},"Win",{w:1.25},"Alt",{w:6.25},"Space",{w:1.5},"RAlt",{w:1.5},"RCtrl","←\n\n\n\nFn5","↓\n\n\n\nFn8","→\n\n\n\nFn6"]
Under 'burn EEP. file I have DFU and default firmware selected. Should that last one be something else?
I Noticed that after I flash the board isn't recognized as a keyboard anymore by Windows 10? Before flashing it does...How is it listed in the device manager?
Do you mean the code that you see in KLE under Matrix Mapping?No, I mean the wiring of the switch matrix to the MCU, with that, I could write you a QMK firmware.
Yes I noticed the Pause button as well and adjusted it but without succes. I'm thinking something must be wrong with the drivers of the board or something but I can't figure out what. I've added screenshots maybe that helps to see if I'm doing something wrong? Thank you for your time, much appreciated!At your last, use online reflash(just click burn.eep) instead of downloading eep then reflashing with tkg-toolkit. Maybe kimera-core.hex in your tkg-toolkit is out of date. If you still want to use tkg-toolkit, try to down the newest version from https://github.com/kairyu/tkg-toolkit
Yes I noticed the Pause button as well and adjusted it but without succes. I'm thinking something must be wrong with the drivers of the board or something but I can't figure out what. I've added screenshots maybe that helps to see if I'm doing something wrong? Thank you for your time, much appreciated!At your last, use online reflash(just click burn.eep) instead of downloading eep then reflashing with tkg-toolkit. Maybe kimera-core.hex in your tkg-toolkit is out of date. If you still want to use tkg-toolkit, try to down the newest version from https://github.com/kairyu/tkg-toolkit
["Esc","!\n1\n\n\nF1","\"\n2\n\n@\nF2","·\n3\n\n#\nF3","$\n4\n\n~\nF4","%\n5\n\n\nF5","&\n6\n\n¬\nF6","/\n7\n\n\nF7","-\n8\n\n_\nF8","(\n9\n\n\nF9",")\n0\n\n\nF10","?\n'\n\n\nF11","¿\n¡\n\n\nF12",{w:2},"Backspace\n\n\n\nFn7"],
[{w:1.5},"Tab","Q","W\n\n\n\n↑","E\n\n\n€","R","T","Y\n\n\n\nCalc","U","I\n\n\n\nIns","O","P\n\n\n\nPSc","^\n'\n\n[\nScrLk",{a:0},"*\n+\n\n]\nPus\nBrk",{x:0.25,a:4,w:1.25,h:2,w2:1.5,h2:1,x2:-0.25},"Enter"],
[{w:1.75},"Caps Lock","A\n\n\n\n←","S\n\n\n\n↓","D\n\n\n\n→","F","G","H","J","K","L","ñ","¨\n´\n\n{\nHome",{a:5},"ç\n}\n\n\nPgUp"],
[{a:4,w:1.25},"Shift","<\n>","Z","X\n\n\n\nApp","C\n\n\n\nFn2","V\n\n\n\nFn1","B\n\n\n\nFn3","N\n\n\n\nVolDn","M\n\n\n\nVolUp",";\n,\n\n\nMute",":\n.\n\n\nEnd",{w:1.75},"RShift\n\n\n\nPgDn","↑\n\n\n\nFn8","Del\n\n\n\nFn4"],
[{w:1.25},"Ctrl",{w:1.25},"Win",{w:1.25},"Alt",{w:6.25},"Space","Ralt","Fn0","←\n\n\n\nFn5","↓\n\n\n\nFn7","→\n\n\n\nFn6"]
the site is most often down these days tkg.io any other way to flash my red scarf iii keyboard? don't find any solution anywhere! :-[