Author Topic: [GB] Polycarb Switch Films by Kin (COMPLETED)  (Read 13839 times)

0 Members and 2 Guests are viewing this topic.

Offline Oblotzky

  • Thread Starter
  • Posts: 949
  • Location: Cologne, Germany
  • Buy more Round 7.
    • Get yours here!
[GB] Polycarb Switch Films by Kin (COMPLETED)
« on: Tue, 05 December 2017, 08:39:42 »
More info about this product in the original IC



1 set (100 films) - 4.25€ / 5$

Shipping service is Deutsche Post (German Post), and DHL for German orders for more than 6 sets.
The package has tracking and is insured up to 25€ by default. Every additional 100€ value adds 2€ / 2.5$ more to shipping cost:

1-6 sets:
Germany - 3€ / 3.5$
International - 6.5€ / 7.75$

7-29 sets:
Germany - 5€ / 6$ (DHL)
International - 8.5€ / 10.25$

30-50 sets:
Germany - 5€ / 6$ (DHL)
International - 10.5€ / 12.75$

PayPal fees are included.

Colors: Black, Clear, White, Pink, Red, Orange, Purple, Teal

MOQ: 100 total sets (all colors combined)

Order Here

You can only enter once, but you can edit your order for as long as the sheet is open. Should you require address changes later on (before I ship them out obviously), email me at oblotzky at gmail dot com with subject starting with "Polycarb Switch Film GB - ".

GB schedule:
- Accepting orders until 08.12.2017 18:00 CET
~48h for payment, the quicker you pay up the fast I can pay Kin
~2 weeks production
~2 weeks shipping from South Korea to me (for reference, Lightsaver V3 took 9 days to get from SK to my doorstep)
couple days for sorting and shipping out

Christmas and New Year might affect these estimates, I'll make sure to provide frequent updates on how this schedule goes along.

I reserve the right to close the GB early should the number of orders exceed my expectations and I start to worry I'm biting off more than I can chew.

Thanks for joining!
« Last Edit: Sat, 03 March 2018, 11:24:43 by Oblotzky »

Offline Oblotzky

  • Thread Starter
  • Posts: 949
  • Location: Cologne, Germany
  • Buy more Round 7.
    • Get yours here!
Re: [GB] Polycarb Switch Films by Kin
« Reply #1 on: Tue, 05 December 2017, 08:39:56 »
- Accepting orders until 08.12.2017 18:00 CET
- Orders closed, invoices going out soon
- All participants have been invoiced, pay until Monday 11.12.2017 21:00 CET
- 12.12.2017: Remaining invoices have been canceled, order has been placed with the manufacturer.
- 28.12.2017: Production complete, received and sorted by kin, sent off to Germany via EMS
- 11.01.2018: Films picked up from customs, sorting commences
- 19.01.2018: All orders have been sent out
- 20.01.2018: All tracking e-mails have been sent out
« Last Edit: Sat, 20 January 2018, 11:53:01 by Oblotzky »

Offline ghostjuggernaut

  • ** Moderator Emeritus
  • Posts: 3479
  • Location: Maryland
  • Retired
Re: [GB] Polycarb Switch Films by Kin (Accepting orders)
« Reply #2 on: Tue, 05 December 2017, 09:33:38 »
Approval bump  :thumb:

As always, caveat emptor.
               

Offline BunnyLake

  • The OG HHKB Master
  • * Maker
  • Posts: 7082
  • X
    • [CTRL]ALT
Re: [GB] Polycarb Switch Films by Kin (Accepting orders)
« Reply #3 on: Tue, 05 December 2017, 09:43:03 »
This looks great

Offline xondat

  • i'm not a star
  • * Maker
  • Posts: 4388
  • Location: United Kingdom
Re: [GB] Polycarb Switch Films by Kin (Accepting orders)
« Reply #4 on: Tue, 05 December 2017, 09:53:22 »
Went for 12 packs total; thanks Oblotzky :-*

Offline dgneo

  • Supervillain
  • Posts: 1854
Re: [GB] Polycarb Switch Films by Kin (Accepting orders)
« Reply #5 on: Tue, 05 December 2017, 09:56:29 »
Went in for a pack of black and a pack of clears, thanks!

Offline TalkingTree

  • Posts: 2286
  • Location: Italy (142)
    • My projects
Re: [GB] Polycarb Switch Films by Kin (Accepting orders)
« Reply #6 on: Tue, 05 December 2017, 09:59:15 »
Joined. Thanks.
My opensource projects: GH80-3000, Skipad, TOAD (KotM Sept '17), TOAD v2 (KotM April '18), XMMX.

Offline King4477

  • Posts: 15
Re: [GB] Polycarb Switch Films by Kin (Accepting orders)
« Reply #7 on: Tue, 05 December 2017, 10:08:12 »
Joined—glad to see you added purple, hope that it matches the R8 Zealios I just received yesterday ;)

Offline vtachkov

  • Posts: 117
Re: [GB] Polycarb Switch Films by Kin (Accepting orders)
« Reply #8 on: Tue, 05 December 2017, 10:18:50 »
Joined. Thanks again for running this, looks like it'll be a smooth GB.
ACR60 | Time TKL | TGR 910 CE

Offline Ponkan

  • Posts: 70
  • Location: Manitoba, Canada
Re: [GB] Polycarb Switch Films by Kin (Accepting orders)
« Reply #9 on: Tue, 05 December 2017, 10:20:56 »
Glad to grab a pink and a black set!

Offline bminhz

  • Posts: 96
  • Location: San Pellegrino
Re: [GB] Polycarb Switch Films by Kin (Accepting orders)
« Reply #10 on: Tue, 05 December 2017, 11:04:10 »
In for some clears and 1 of everything :)

Online SBN

  • Posts: 55
[GB] Polycarb Switch Films by Kin (Accepting orders)
« Reply #11 on: Tue, 05 December 2017, 11:04:43 »
Nice to see the new colors added! I’m in!

Thanks Oblotzky!

Offline typischt

  • Posts: 89
Re: [GB] Polycarb Switch Films by Kin (Accepting orders)
« Reply #12 on: Tue, 05 December 2017, 11:16:30 »
Also in for 6 sets of different colors. Thanks for the GB!  :thumb:

Offline omgar

  • Posts: 152
  • Location: Bay Area, CA
Re: [GB] Polycarb Switch Films by Kin (Accepting orders)
« Reply #13 on: Tue, 05 December 2017, 11:28:53 »
Thanks for the gb! In for 6.

Offline Oblotzky

  • Thread Starter
  • Posts: 949
  • Location: Cologne, Germany
  • Buy more Round 7.
    • Get yours here!
Re: [GB] Polycarb Switch Films by Kin (Accepting orders)
« Reply #14 on: Tue, 05 December 2017, 11:30:32 »
Thanks for the gb! In for 6.

You entered your zip code as country ;) from the city and state I can guess the correct country but better if you fix it yourself. Thanks!

Also we have long passed MOQ, currently at a total of 230 sets!

Offline omgar

  • Posts: 152
  • Location: Bay Area, CA
Re: [GB] Polycarb Switch Films by Kin (Accepting orders)
« Reply #15 on: Tue, 05 December 2017, 11:42:27 »
Thanks for the gb! In for 6.

You entered your zip code as country ;) from the city and state I can guess the correct country but better if you fix it yourself. Thanks!

Also we have long passed MOQ, currently at a total of 230 sets!

Fixed. Thank you. :)

Offline Fausuto

  • Posts: 31
Re: [GB] Polycarb Switch Films by Kin (Accepting orders)
« Reply #16 on: Tue, 05 December 2017, 11:46:05 »
Thanks for the GB! I'm in for 6 sets. I hope I filled everything correctly!

Offline Puddsy

  • Foreman of the salt mine
  • * Exalted Elder
  • Posts: 8452
  • Location: New England
  • Can't handle the heat? Stay out of the kitchen.
Re: [GB] Polycarb Switch Films by Kin (Accepting orders)
« Reply #17 on: Tue, 05 December 2017, 12:04:31 »
In for a few of the new colors.
QFR | MJ2 TKL | Realforce 87U | G81-3000 "Schumiboard" | Varmilo Bulgogiboard (Keycon 104) | KBD75 | MIRA (Clearsuns) | Weaven (MOD-M) | TGR Alice (soon!) | A secret board

has puddsy gotten an award for person most involved with things hes not involved in at all, yet?

Online Atredl

  • Posts: 685
  • Location: SoCal
Re: [GB] Polycarb Switch Films by Kin (Accepting orders)
« Reply #18 on: Tue, 05 December 2017, 14:23:02 »
Does anyone know if these fit properly in Zealios?

In the past I tried to put stickers in Zealios and they wouldn't close properly. If they don't fit then I can save a bit of money and not have to buy any clear.

Offline vegs

  • Posts: 255
  • Location: Norway
Re: [GB] Polycarb Switch Films by Kin (Accepting orders)
« Reply #19 on: Tue, 05 December 2017, 15:49:36 »
Does anyone know if these fit properly in Zealios?

In the past I tried to put stickers in Zealios and they wouldn't close properly. If they don't fit then I can save a bit of money and not have to buy any clear.
They fit but they I think they get a bit too tight. No need for stickers in Gateron switches in my opinion.
Instagram | Flickr | Twitch

X60 | HHKB | Klippe | 910CE | Keycult No.1

Online Atredl

  • Posts: 685
  • Location: SoCal
Re: [GB] Polycarb Switch Films by Kin (Accepting orders)
« Reply #20 on: Tue, 05 December 2017, 16:04:02 »
Does anyone know if these fit properly in Zealios?

In the past I tried to put stickers in Zealios and they wouldn't close properly. If they don't fit then I can save a bit of money and not have to buy any clear.
They fit but they I think they get a bit too tight. No need for stickers in Gateron switches in my opinion.
Thanks for the confirmation  :thumb: Looks like I'm just getting black.

Offline feediko

  • Posts: 32
  • Location: Cologne, Ger.
Re: [GB] Polycarb Switch Films by Kin (Accepting orders)
« Reply #21 on: Tue, 05 December 2017, 16:40:38 »
Ordered. Can I come pick them up myself?  :)

Offline Oblotzky

  • Thread Starter
  • Posts: 949
  • Location: Cologne, Germany
  • Buy more Round 7.
    • Get yours here!
Re: [GB] Polycarb Switch Films by Kin (Accepting orders)
« Reply #22 on: Tue, 05 December 2017, 17:17:22 »
Ordered. Can I come pick them up myself?  :)

I guess so, but I live outside the city, 13km from the address you entered.

Offline tanvir175

  • Posts: 340
Re: [GB] Polycarb Switch Films by Kin (Accepting orders)
« Reply #23 on: Tue, 05 December 2017, 18:27:39 »
Thanks for joining!

Ordered 6 packs of clears earlier with username RedHawk02 from Reddit. I don't think there is but if there are any issues with my information, let me know and I'll fix it ASAP :)

Congrats on the successful GB!

Offline Artemisia254

  • Posts: 5
Re: [GB] Polycarb Switch Films by Kin (Accepting orders)
« Reply #24 on: Tue, 05 December 2017, 23:27:50 »
In for 6 , thank :)

Offline online

  • Posts: 81
Re: [GB] Polycarb Switch Films by Kin (Accepting orders)
« Reply #25 on: Wed, 06 December 2017, 02:47:08 »
Is UK order pay the same cost as international order?

Offline Puddsy

  • Foreman of the salt mine
  • * Exalted Elder
  • Posts: 8452
  • Location: New England
  • Can't handle the heat? Stay out of the kitchen.
Re: [GB] Polycarb Switch Films by Kin (Accepting orders)
« Reply #26 on: Wed, 06 December 2017, 03:42:29 »
Is UK order pay the same cost as international order?

yes
QFR | MJ2 TKL | Realforce 87U | G81-3000 "Schumiboard" | Varmilo Bulgogiboard (Keycon 104) | KBD75 | MIRA (Clearsuns) | Weaven (MOD-M) | TGR Alice (soon!) | A secret board

has puddsy gotten an award for person most involved with things hes not involved in at all, yet?

Offline funderburker

  • Posts: 751
  • Location: Latvia, Riga
Re: [GB] Polycarb Switch Films by Kin (Accepting orders)
« Reply #27 on: Wed, 06 December 2017, 03:50:51 »
Does anyone know if these fit properly in Zealios?

In the past I tried to put stickers in Zealios and they wouldn't close properly. If they don't fit then I can save a bit of money and not have to buy any clear.
They fit but they I think they get a bit too tight. No need for stickers in Gateron switches in my opinion.

Entered for two packs - Black and Clear. If stickers for Gateron isn't really needed then will probably change one or the other pack to something bright. Thanks for the heads up Vegs!

Offline MeloDet

  • Posts: 93
Re: [GB] Polycarb Switch Films by Kin (Accepting orders)
« Reply #28 on: Wed, 06 December 2017, 08:33:21 »
Entered! BTW, if these aren't really necessary with gateron switches is there a specific switch type they are particularly useful for? I bought em just to have some on hand, but I would've assumed everyone was buying em for wobbly gats.

Offline _rubik

  • Posts: 425
  • Location: 192.168.x.x
  • Typing on: GH60 + 65G Zealios
Re: [GB] Polycarb Switch Films by Kin (Accepting orders)
« Reply #29 on: Wed, 06 December 2017, 10:44:47 »
Entered. Picked up 3 packs in the new colors. Pretty excited to see the results. Any idea how they'll behave on Kailh switches?

Offline wholypantalones

  • Posts: 240
  • Location: 616
Re: [GB] Polycarb Switch Films by Kin (Accepting orders)
« Reply #30 on: Wed, 06 December 2017, 11:36:08 »
Entered! BTW, if these aren't really necessary with gateron switches is there a specific switch type they are particularly useful for? I bought em just to have some on hand, but I would've assumed everyone was buying em for wobbly gats.

I believe they're generally used for Cherry switch tops. When you open the switches to modify them, the tops get loose and these are meant to take up the space so they don't rattle or wobble. Gateron and clear tops are more brittle, so they don't bend and become loose. They only fix wobble in stopping the switch top from wobbling.

Offline Oblotzky

  • Thread Starter
  • Posts: 949
  • Location: Cologne, Germany
  • Buy more Round 7.
    • Get yours here!
Re: [GB] Polycarb Switch Films by Kin (Accepting orders)
« Reply #31 on: Wed, 06 December 2017, 19:17:31 »
We currently have 77 participants with a total of 482 sets ordered. I'll be closing the GB on Friday (08.12.2017) at 18:00 CET as I feel comfortable fulfilling ~100 orders. Once the GB is closed I'll send out invoices and you'll have 48h to pay that. If you changed your mind, just decline the invoice.

Thanks!
« Last Edit: Wed, 06 December 2017, 19:57:43 by Oblotzky »

Online Atredl

  • Posts: 685
  • Location: SoCal
Re: [GB] Polycarb Switch Films by Kin (Accepting orders)
« Reply #32 on: Wed, 06 December 2017, 19:51:30 »
We currently have 77 participants with a total of 482 sets ordered. I'll be closing the GB on Friday (07.12.2017) at 18:00 CET as I feel comfortable fulfilling ~100 orders. Once the GB is closed I'll send out invoices and you'll have 48h to pay that. If you changed your mind, just decline the invoice.

Thanks!
Did you mean the 8th(Friday)?

Offline Oblotzky

  • Thread Starter
  • Posts: 949
  • Location: Cologne, Germany
  • Buy more Round 7.
    • Get yours here!
Re: [GB] Polycarb Switch Films by Kin (Accepting orders)
« Reply #33 on: Wed, 06 December 2017, 19:58:33 »
We currently have 77 participants with a total of 482 sets ordered. I'll be closing the GB on Friday (07.12.2017) at 18:00 CET as I feel comfortable fulfilling ~100 orders. Once the GB is closed I'll send out invoices and you'll have 48h to pay that. If you changed your mind, just decline the invoice.

Thanks!
Did you mean the 8th(Friday)?

Yeah, I should maybe get some sleep  ;) fixed and thanks

Offline Cavemann6

  • Posts: 62
  • Location: San Diego
Re: [GB] Polycarb Switch Films by Kin (Accepting orders until Friday 18:00 CET)
« Reply #34 on: Wed, 06 December 2017, 22:49:09 »
entered for 2 pink packs :D

Offline derzemel

  • Posts: 158
  • Location: Bucharest, Romania
Re: [GB] Polycarb Switch Films by Kin (Accepting orders until Friday 18:00 CET)
« Reply #35 on: Thu, 07 December 2017, 06:04:20 »
entered as well :)

Offline ramnes

  • Posts: 533
  • Location: France
  • T fou, mec?
Re: [GB] Polycarb Switch Films by Kin (Accepting orders until Friday 18:00 CET)
« Reply #36 on: Thu, 07 December 2017, 12:38:45 »
Orange, yeah! I'm in for four packs (orange, red, purple, black)!
23h18 - photekq: hhkb with silenced realforce sliders and lubricated well is
23h18 - photekq: the best switch i've used

Offline SantiGo

  • Posts: 10
  • Location: Italia (Ukraina)
Re: [GB] Polycarb Switch Films by Kin (Accepting orders until Friday 18:00 CET)
« Reply #37 on: Thu, 07 December 2017, 18:22:18 »
H1 with kailh box and telios iys good?

Offline Puddsy

  • Foreman of the salt mine
  • * Exalted Elder
  • Posts: 8452
  • Location: New England
  • Can't handle the heat? Stay out of the kitchen.
Re: [GB] Polycarb Switch Films by Kin (Accepting orders until Friday 18:00 CET)
« Reply #38 on: Thu, 07 December 2017, 18:46:23 »
H1 with kailh box and telios iys good?

tealios yes (sort of, they don't work quite right with gateron housings)

kailh box no
QFR | MJ2 TKL | Realforce 87U | G81-3000 "Schumiboard" | Varmilo Bulgogiboard (Keycon 104) | KBD75 | MIRA (Clearsuns) | Weaven (MOD-M) | TGR Alice (soon!) | A secret board

has puddsy gotten an award for person most involved with things hes not involved in at all, yet?

Offline PotatoTM

  • Posts: 121
  • Location: ON, Canada
  • ...
Re: [GB] Polycarb Switch Films by Kin (Accepting orders until Friday 18:00 CET)
« Reply #39 on: Thu, 07 December 2017, 20:55:43 »
In for 3 Clears, 2 Purples, 1 Teal!
« Last Edit: Thu, 07 December 2017, 22:50:02 by PotatoTM »

Offline PlastikSchnittstelle

  • Posts: 240
  • Location: Germany, FFM
Re: [GB] Polycarb Switch Films by Kin (Accepting orders until Friday 18:00 CET)
« Reply #40 on: Fri, 08 December 2017, 04:07:47 »
just saw it at wodans' channel:

in for 2xblack and 2xtransparen.
thanks!
« Last Edit: Fri, 08 December 2017, 04:10:34 by PlastikSchnittstelle »

Offline codywanks

  • Posts: 188
  • Location: Wankdorf, Switzerland
Re: [GB] Polycarb Switch Films by Kin (Accepting orders until Friday 18:00 CET)
« Reply #41 on: Fri, 08 December 2017, 04:48:48 »
Decided to join, since I never received an invoice for this...

Offline funderburker

  • Posts: 751
  • Location: Latvia, Riga
Re: [GB] Polycarb Switch Films by Kin (Accepting orders until Friday 18:00 CET)
« Reply #42 on: Fri, 08 December 2017, 06:21:08 »
just saw it at wodans' channel:

in for 2xblack and 2xtransparen.
thanks!

Thanks for the share. Great video and really informative. :)

Offline _rubik

  • Posts: 425
  • Location: 192.168.x.x
  • Typing on: GH60 + 65G Zealios
Re: [GB] Polycarb Switch Films by Kin (Accepting orders until Friday 18:00 CET)
« Reply #43 on: Fri, 08 December 2017, 09:35:13 »
just saw it at wodans' channel:

in for 2xblack and 2xtransparen.
thanks!

Thanks for the share. Great video and really informative. :)

Just watched that too. 100% black magic. I can't wait for mine to ship out.

Offline Shihatsu

  • Posts: 15
Re: [GB] Polycarb Switch Films by Kin (Accepting orders until Friday 18:00 CET)
« Reply #44 on: Fri, 08 December 2017, 09:50:24 »
I have no paypal but wish to participate - any possibility?

Offline gnmar2723

  • Posts: 321
  • Location: Minnesota
  • i just want it to stop
Re: [GB] Polycarb Switch Films by Kin (Accepting orders until Friday 18:00 CET)
« Reply #45 on: Fri, 08 December 2017, 10:11:33 »
Slipped in right before the deadline because of Woodan's video ;D
gnmar2723's projects

I generally concentrate on the stop light. When that **** turns green its mother****ing Nürburgring time.

Offline Oblotzky

  • Thread Starter
  • Posts: 949
  • Location: Cologne, Germany
  • Buy more Round 7.
    • Get yours here!
Re: [GB] Polycarb Switch Films by Kin (Accepting orders until Friday 18:00 CET)
« Reply #46 on: Fri, 08 December 2017, 10:17:14 »
I have no paypal but wish to participate - any possibility?

You can wire me the money via SEPA if you have a European bank account, but otherwise no :/

Offline Shihatsu

  • Posts: 15
Re: [GB] Polycarb Switch Films by Kin (Accepting orders until Friday 18:00 CET)
« Reply #47 on: Fri, 08 December 2017, 10:33:49 »
That would be no problem for me, beeing german. But how to order? The form demands a paypal adress...
Nevertheless, I filled it out and just will pay the invoice via SEPA. Thank you!

Offline pvd

  • Posts: 58
Re: [GB] Polycarb Switch Films by Kin (Accepting orders until Friday 18:00 CET)
« Reply #48 on: Fri, 08 December 2017, 10:43:45 »
Never used switch films before, but I went ahead and bought some. Interested to see how they feel!  :thumb:

Offline Oblotzky

  • Thread Starter
  • Posts: 949
  • Location: Cologne, Germany
  • Buy more Round 7.
    • Get yours here!
Re: [GB] Polycarb Switch Films by Kin (Accepting orders until Friday 18:00 CET)
« Reply #49 on: Fri, 08 December 2017, 10:52:48 »
That would be no problem for me, beeing german. But how to order? The form demands a paypal adress...
Nevertheless, I filled it out and just will pay the invoice via SEPA. Thank you!

I put it in your order comment and will PM you my IBAN, Name and amount later.