Author Topic: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)  (Read 198915 times)

0 Members and 1 Guest are viewing this topic.

Offline ChitownM2

  • Posts: 326
Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
« Reply #350 on: Wed, 30 August 2017, 12:32:33 »
Do you know if they were able to overcome that?

Ano Rush, but are there any updates on this? =)

Also, does anyone know what happens to the Tina 60 yas cases?
I was on the form for 3 boards but haven't received an invoice...
Really hoping I didn't miss out O_O

Now we are wait firmware downloaded to MCU.

For case i still don't get any information again about sample from wei KBDfans

Wei e-mailed me yesterday about the preparation of invoices that he is going to send out. Of course, he will confirm the sample case to fit with Silentreader first.
Everything is getting there, slowly but surely.

Did they ever give an answer regarding the ability to buy a Tina B or other case as part of the same transaction? I posted the question on the reddit thread linked above but no one ever responded.

Offline menuhin

  • Posts: 1225
  • Location: Germany
Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
« Reply #351 on: Wed, 30 August 2017, 12:43:09 »
I just know that initially KBDfans quickly wanted to increase the price of the case of this GB back to > $100 or even > $120.
And I didn't ask further if more cases can be ordered also in such a discounted price.

This may be responded via the invoice - you may be allowed to pay for 1 more case in such a good price; if not, you can also reply via the PayPal e-mail address about your unanswered question.

AFAIK, none of the members in this list ordering for the special production has ever received an invoice yet, as Silentreader and Wei are still working on the confirmation of case dimensions.
Wishlist: 1) nice thick Alps caps; 2) Cherry profile POM;
More
Wishful-list: 1) We order from keyboard-layout-editor.com; 2) usable Trackpoint module for all keyboards
IBM M13 black
NeXT non-ADB keyboard (AAE)
HHKB Pro 2 HasuBT
[~90WPM, in love with Emacs, and Lisp]

Offline ppp

  • Posts: 158
  • Location: Mech
  • KappaKeepoKoopa
Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
« Reply #352 on: Fri, 01 September 2017, 11:01:46 »
Do you know if they were able to overcome that?

Ano Rush, but are there any updates on this? =)

Also, does anyone know what happens to the Tina 60 yas cases?
I was on the form for 3 boards but haven't received an invoice...
Really hoping I didn't miss out O_O

Now we are wait firmware downloaded to MCU.

For case i still don't get any information again about sample from wei KBDfans

So what does this mean in terms of timeline of when it gets shipped out? Do you have an estimate of when?  Thanks :)

Offline yasintahir

  • Formerly silentreader
  • Thread Starter
  • Posts: 291
  • Location: Indonesia
Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
« Reply #353 on: Mon, 04 September 2017, 22:53:18 »
News Update:

- PCB and plate didn't shipped yet to leeku form factory (Leeku said 15 sept deadline factory ship it to him)
- I'm no longer have proxy in Korea so i need to ship it first to Indonesia before ship it to you

Offline JDragon

  • Posts: 469
Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
« Reply #354 on: Wed, 06 September 2017, 16:45:08 »
KBDfans posted on their blog that the case sample is ready :)

https://kbdfans.cn/blogs/news/ys62-tina-case-update

Offline Che.R.Ry

  • Posts: 38
  • geeks
Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
« Reply #355 on: Wed, 06 September 2017, 20:29:02 »
KBDfans posted on their blog that the case sample is ready :)

https://kbdfans.cn/blogs/news/ys62-tina-case-update
wooooo hype is real  :p

Offline FoC_Tow

  • * Destiny Supporter
  • Posts: 1142
  • Location: Germany
  • Brokehlicious
Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
« Reply #356 on: Fri, 08 September 2017, 12:09:06 »

Offline ppp

  • Posts: 158
  • Location: Mech
  • KappaKeepoKoopa
Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
« Reply #357 on: Tue, 12 September 2017, 08:57:21 »
Soo..

Any last updates/timeframes? I might actually be moving soon (didn't expect this gb to go this long tbh haha) and I might have to change my address on my shipping order if it turns out production will take a bit longer. Thanks!

Offline yasintahir

  • Formerly silentreader
  • Thread Starter
  • Posts: 291
  • Location: Indonesia
Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
« Reply #358 on: Tue, 12 September 2017, 09:08:12 »
Soo..

Any last updates/timeframes? I might actually be moving soon (didn't expect this gb to go this long tbh haha) and I might have to change my address on my shipping order if it turns out production will take a bit longer. Thanks!
As leeku said 15 sept deadline factory send out pcb to him. I think this pcb will be shipped to me on October.

For shipping address i'll collect again when leeku ship all pcb to me

Sent from my Redmi Note 4 using Tapatalk


Offline ppp

  • Posts: 158
  • Location: Mech
  • KappaKeepoKoopa
Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
« Reply #359 on: Tue, 12 September 2017, 13:08:59 »
Soo..

Any last updates/timeframes? I might actually be moving soon (didn't expect this gb to go this long tbh haha) and I might have to change my address on my shipping order if it turns out production will take a bit longer. Thanks!
As leeku said 15 sept deadline factory send out pcb to him. I think this pcb will be shipped to me on October.

For shipping address i'll collect again when leeku ship all pcb to me

Sent from my Redmi Note 4 using Tapatalk

Sick. Thanks! In that case, hit me up with a PM when you get the pcbs, I'll definitely be moved out by then. Still excited  ;D

Offline menuhin

  • Posts: 1225
  • Location: Germany
Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
« Reply #360 on: Wed, 13 September 2017, 06:58:29 »
Soo..

Any last updates/timeframes? I might actually be moving soon (didn't expect this gb to go this long tbh haha) and I might have to change my address on my shipping order if it turns out production will take a bit longer. Thanks!
As leeku said 15 sept deadline factory send out pcb to him. I think this pcb will be shipped to me on October.

For shipping address i'll collect again when leeku ship all pcb to me

Sent from my Redmi Note 4 using Tapatalk

Then that means the dimensions and fitting of TINA-YAS62 case will be examined in mid-to-late October 2017.
I am glad that both Silentreader and Wei are trying to be very careful in the productions for this run.
Wishlist: 1) nice thick Alps caps; 2) Cherry profile POM;
More
Wishful-list: 1) We order from keyboard-layout-editor.com; 2) usable Trackpoint module for all keyboards
IBM M13 black
NeXT non-ADB keyboard (AAE)
HHKB Pro 2 HasuBT
[~90WPM, in love with Emacs, and Lisp]

Offline ppp

  • Posts: 158
  • Location: Mech
  • KappaKeepoKoopa
Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
« Reply #361 on: Thu, 21 September 2017, 11:14:08 »
possible for an update? hopefully the pcb's turned out ok!

Offline yasintahir

  • Formerly silentreader
  • Thread Starter
  • Posts: 291
  • Location: Indonesia
Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
« Reply #362 on: Tue, 26 September 2017, 07:43:54 »
News update :

- PCB will be arrived to leeku early next week
- But for plate it will come at mid october :(

When PCB arrived to leeku i will ask him to send 1 pcs PCB to wei from KBDfans to check it's fit with his TINA Case.
I hope when all PCB + Plate shipped to you TINA case done too so it will not take too much time PCB and case came along.

I really appreciate your patience.
Seems like it's bad lead times for my first group buy.

Offline FoC_Tow

  • * Destiny Supporter
  • Posts: 1142
  • Location: Germany
  • Brokehlicious
Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
« Reply #363 on: Tue, 26 September 2017, 09:37:28 »
News update :

- PCB will be arrived to leeku early next week
- But for plate it will come at mid october :(

When PCB arrived to leeku i will ask him to send 1 pcs PCB to wei from KBDfans to check it's fit with his TINA Case.
I hope when all PCB + Plate shipped to you TINA case done too so it will not take too much time PCB and case came along.

I really appreciate your patience.
Seems like it's bad lead times for my first group buy.


No worries Silent!

I've been waiting for this layout even longer before the gb.
Finally getting arrowed 60 PCBs and matching case is well worth the wait.

Offline arninja21

  • Posts: 33
Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
« Reply #364 on: Thu, 28 September 2017, 07:12:11 »
Just saw in kbdfans website

Your case are ready for purchase!

https://kbdfans.myshopify.com/products/yas62-keyboard-case?variant=45016700493
  

Offline gr4v3m4n

  • Posts: 112
  • Location: kaps land
    • my store
Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
« Reply #365 on: Thu, 28 September 2017, 07:33:07 »
Just saw in kbdfans website

Your case are ready for purchase!

https://kbdfans.myshopify.com/products/yas62-keyboard-case?variant=45016700493

whattt!!! why did he send any invoice? we have to buy from his site?

Offline Che.R.Ry

  • Posts: 38
  • geeks
Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
« Reply #366 on: Thu, 28 September 2017, 09:15:21 »
News update :

- PCB will be arrived to leeku early next week
- But for plate it will come at mid october :(

When PCB arrived to leeku i will ask him to send 1 pcs PCB to wei from KBDfans to check it's fit with his TINA Case.
I hope when all PCB + Plate shipped to you TINA case done too so it will not take too much time PCB and case came along.

I really appreciate your patience.
Seems like it's bad lead times for my first group buy.

Its okay silentreader, sometimes things can go out of control ;D
And i just wanna ask some silly question since im quite new to this custom keyboard thing
"Do we need to fit the plate too?" since it will have some kind of thickness inside the case along with the PCB


Just saw in kbdfans website

Your case are ready for purchase!

https://kbdfans.myshopify.com/products/yas62-keyboard-case?variant=45016700493

that design look sick  :eek:

Offline DasGnome

  • Posts: 160
Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
« Reply #367 on: Thu, 28 September 2017, 09:20:59 »
Just saw in kbdfans website

Your case are ready for purchase!

https://kbdfans.myshopify.com/products/yas62-keyboard-case?variant=45016700493

whattt!!! why did he send any invoice? we have to buy from his site?

Looks like they are going back on their word from the interest check. That sucks.

Offline ppp

  • Posts: 158
  • Location: Mech
  • KappaKeepoKoopa
Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
« Reply #368 on: Thu, 28 September 2017, 09:22:05 »
Just saw in kbdfans website

Your case are ready for purchase!

https://kbdfans.myshopify.com/products/yas62-keyboard-case?variant=45016700493

do we know when this is going to close? I don't want to spend too much money at once lol

Offline yasintahir

  • Formerly silentreader
  • Thread Starter
  • Posts: 291
  • Location: Indonesia
Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
« Reply #369 on: Thu, 28 September 2017, 09:37:37 »

Its okay silentreader, sometimes things can go out of control ;D
And i just wanna ask some silly question since im quite new to this custom keyboard thing
"Do we need to fit the plate too?" since it will have some kind of thickness inside the case along with the PCB


Not sure, but i think it will be fit.
And leeku send PCB prototype to kbdfans tommorow so we will see it will be fit or not.

Offline Che.R.Ry

  • Posts: 38
  • geeks
Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
« Reply #370 on: Thu, 28 September 2017, 09:57:45 »
Just saw in kbdfans website

Your case are ready for purchase!

https://kbdfans.myshopify.com/products/yas62-keyboard-case?variant=45016700493

whattt!!! why did he send any invoice? we have to buy from his site?

Looks like they are going back on their word from the interest check. That sucks.

Yap looks like it, but menuhin already mentioned about that issue on older post here -->
I know, it sucks but I think there's nothing we can do about it :(

I just know that initially KBDfans quickly wanted to increase the price of the case of this GB back to > $100 or even > $120.
And I didn't ask further if more cases can be ordered also in such a discounted price.

This may be responded via the invoice - you may be allowed to pay for 1 more case in such a good price; if not, you can also reply via the PayPal e-mail address about your unanswered question.

AFAIK, none of the members in this list ordering for the special production has ever received an invoice yet, as Silentreader and Wei are still working on the confirmation of case dimensions.
---------------------------------------------------------------------------------------------------------

Its okay silentreader, sometimes things can go out of control ;D
And i just wanna ask some silly question since im quite new to this custom keyboard thing
"Do we need to fit the plate too?" since it will have some kind of thickness inside the case along with the PCB


Not sure, but i think it will be fit.
And leeku send PCB prototype to kbdfans tommorow so we will see it will be fit or not.

ok then, keep us informed ;)

Offline gr4v3m4n

  • Posts: 112
  • Location: kaps land
    • my store
Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
« Reply #371 on: Thu, 28 September 2017, 12:21:02 »
Just saw in kbdfans website

Your case are ready for purchase!

https://kbdfans.myshopify.com/products/yas62-keyboard-case?variant=45016700493

whattt!!! why did he send any invoice? we have to buy from his site?

Looks like they are going back on their word from the interest check. That sucks.

Yap looks like it, but menuhin already mentioned about that issue on older post here -->
I know, it sucks but I think there's nothing we can do about it :(

I just know that initially KBDfans quickly wanted to increase the price of the case of this GB back to > $100 or even > $120.
And I didn't ask further if more cases can be ordered also in such a discounted price.

This may be responded via the invoice - you may be allowed to pay for 1 more case in such a good price; if not, you can also reply via the PayPal e-mail address about your unanswered question.

AFAIK, none of the members in this list ordering for the special production has ever received an invoice yet, as Silentreader and Wei are still working on the confirmation of case dimensions.

yeah its sucks i even replied to his email wanting black colour and theres no black  :-\

Offline FoC_Tow

  • * Destiny Supporter
  • Posts: 1142
  • Location: Germany
  • Brokehlicious
Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
« Reply #372 on: Thu, 28 September 2017, 14:02:28 »
Whaaat no Black? O_O

Price increase sucks, but tbh 120 is still a very reasonable price for these imo.

What really sucks is that black is not available imo

Offline menuhin

  • Posts: 1225
  • Location: Germany
Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
« Reply #373 on: Thu, 28 September 2017, 14:55:01 »
Whaaat no Black? O_O

Price increase sucks, but tbh 120 is still a very reasonable price for these imo.

What really sucks is that black is not available imo

Well, I have no control over KBDfans final pricing and their marketing / branding strategy, despite all my effort spent on collecting e-mails and comments and orders.

Perhaps it's good to think positively that a case design tailor-made for the kit is available at the same time it is going to arrive our home.

For the black color request, I think you can send KBDfans' people with a request message or a comment. They have so many Alu-anodized cases produced and added a few black YAS62-TINA cases to their black anodizing bath won't be a big problem, I believe.
Wishlist: 1) nice thick Alps caps; 2) Cherry profile POM;
More
Wishful-list: 1) We order from keyboard-layout-editor.com; 2) usable Trackpoint module for all keyboards
IBM M13 black
NeXT non-ADB keyboard (AAE)
HHKB Pro 2 HasuBT
[~90WPM, in love with Emacs, and Lisp]

Offline FoC_Tow

  • * Destiny Supporter
  • Posts: 1142
  • Location: Germany
  • Brokehlicious
[GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
« Reply #374 on: Thu, 28 September 2017, 19:18:41 »
Whaaat no Black? O_O

Price increase sucks, but tbh 120 is still a very reasonable price for these imo.

What really sucks is that black is not available imo

Well, I have no control over KBDfans final pricing and their marketing / branding strategy, despite all my effort spent on collecting e-mails and comments and orders.

Perhaps it's good to think positively that a case design tailor-made for the kit is available at the same time it is going to arrive our home.

For the black color request, I think you can send KBDfans' people with a request message or a comment. They have so many Alu-anodized cases produced and added a few black YAS62-TINA cases to their black anodizing bath won't be a big problem, I believe.


I didn't mean to sound that negative menuhin, after rereading my post it came of less positive then intended.

What I was trying to say is, of course the lower price would have been even better, but 120 is still very reasonable.

I love the YAS62 layout and I am more then glad to be able to get a quality case tailor made for this. <3


What bothered me was the black situation, but I'll definitely reach out to ask them =)

Offline DasGnome

  • Posts: 160
Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
« Reply #375 on: Fri, 29 September 2017, 07:30:57 »
I inquired to Wei about the price increase, and here's what he said: 

"hi
this price include shipping and paypal fee  You can order directly from my website, sample PCB is expected to arrive in a week, and when I test no problem, I can ship the goods"

Seems reasonable enough to me for a custom case.

Offline ppp

  • Posts: 158
  • Location: Mech
  • KappaKeepoKoopa
Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
« Reply #376 on: Fri, 29 September 2017, 09:16:16 »
I inquired to Wei about the price increase, and here's what he said: 

"hi
this price include shipping and paypal fee  You can order directly from my website, sample PCB is expected to arrive in a week, and when I test no problem, I can ship the goods"

Seems reasonable enough to me for a custom case.

That's true. 90$ shipped from China to CONUS/EU would've been nuts price.

Offline Che.R.Ry

  • Posts: 38
  • geeks
Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
« Reply #377 on: Fri, 29 September 2017, 12:58:26 »
Whaaat no Black? O_O

Price increase sucks, but tbh 120 is still a very reasonable price for these imo.

What really sucks is that black is not available imo

Well, I have no control over KBDfans final pricing and their marketing / branding strategy, despite all my effort spent on collecting e-mails and comments and orders.

Perhaps it's good to think positively that a case design tailor-made for the kit is available at the same time it is going to arrive our home.

For the black color request, I think you can send KBDfans' people with a request message or a comment. They have so many Alu-anodized cases produced and added a few black YAS62-TINA cases to their black anodizing bath won't be a big problem, I believe.

no problem menuhin, u did the best u can ;)
props to silentreader and menuhin :thumb:
the price is still reasonable with included shipping and paypal fees :p

Offline ppp

  • Posts: 158
  • Location: Mech
  • KappaKeepoKoopa
Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
« Reply #378 on: Tue, 03 October 2017, 09:05:32 »
wait so I just ordered tina for the yas62 but I was wondering if we could get a yas62 version of his new 5degree 60% case...

https://kbdfans.myshopify.com/products/pre-orderkbdfans-5-60-case

Offline ppp

  • Posts: 158
  • Location: Mech
  • KappaKeepoKoopa
Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
« Reply #379 on: Tue, 03 October 2017, 09:07:44 »
wait so I just ordered tina for the yas62 but I was wondering if we could get a yas62 version of his new 5degree 60% case...

https://kbdfans.myshopify.com/products/pre-orderkbdfans-5-60-case

I just emailed him. Hopefully he brings some good news!

Offline FoC_Tow

  • * Destiny Supporter
  • Posts: 1142
  • Location: Germany
  • Brokehlicious
Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
« Reply #380 on: Wed, 04 October 2017, 02:48:59 »
wait so I just ordered tina for the yas62 but I was wondering if we could get a yas62 version of his new 5degree 60% case...

https://kbdfans.myshopify.com/products/pre-orderkbdfans-5-60-case

Wow, haven't seen this one before.

However, this looks to be a one part tray case.

On a one part case it will be difficult to impossible to machine blockers with room below for the plate/pcb.

Also it would be difficult to insert the pcb/plate into the case.


To make this work, both pcb & plate would need to have cutouts so they don't extend below the blockers.

Offline ppp

  • Posts: 158
  • Location: Mech
  • KappaKeepoKoopa
Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
« Reply #381 on: Wed, 04 October 2017, 08:32:34 »
wait so I just ordered tina for the yas62 but I was wondering if we could get a yas62 version of his new 5degree 60% case...

https://kbdfans.myshopify.com/products/pre-orderkbdfans-5-60-case

Wow, haven't seen this one before.

However, this looks to be a one part tray case.

On a one part case it will be difficult to impossible to machine blockers with room below for the plate/pcb.

Also it would be difficult to insert the pcb/plate into the case.


To make this work, both pcb & plate would need to have cutouts so they don't extend below the blockers.

Upon further inspection it would seem that you're right. Wei suggested that since he has screw-on blockers, that we would just need screw holes in the plate/pcb. I'm fine with doing it myself on the plate but the pcb I'm more worried about...
I just think aesthetic-wise it looks nicer than the TINA. Though honestly the more I think about it, I might just commission out/try to make my own wood case...

Offline FoC_Tow

  • * Destiny Supporter
  • Posts: 1142
  • Location: Germany
  • Brokehlicious
[GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
« Reply #382 on: Wed, 04 October 2017, 18:55:06 »
wait so I just ordered tina for the yas62 but I was wondering if we could get a yas62 version of his new 5degree 60% case...

https://kbdfans.myshopify.com/products/pre-orderkbdfans-5-60-case

Wow, haven't seen this one before.

However, this looks to be a one part tray case.

On a one part case it will be difficult to impossible to machine blockers with room below for the plate/pcb.

Also it would be difficult to insert the pcb/plate into the case.


To make this work, both pcb & plate would need to have cutouts so they don't extend below the blockers.

Upon further inspection it would seem that you're right. Wei suggested that since he has screw-on blockers, that we would just need screw holes in the plate/pcb. I'm fine with doing it myself on the plate but the pcb I'm more worried about...
I just think aesthetic-wise it looks nicer than the TINA. Though honestly the more I think about it, I might just commission out/try to make my own wood case...

I've made wooden cases before using a router on a custom jig.

It's not that difficult and I can give you a rundown/some pics if you are interested. =)

Edit: old pics I found on my mobile but you get the idea
https://imgur.com/gallery/L0R9M
« Last Edit: Wed, 04 October 2017, 19:09:37 by FoC_Tow »

Offline ppp

  • Posts: 158
  • Location: Mech
  • KappaKeepoKoopa
Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
« Reply #383 on: Thu, 05 October 2017, 09:10:42 »
I've made wooden cases before using a router on a custom jig.

It's not that difficult and I can give you a rundown/some pics if you are interested. =)

Edit: old pics I found on my mobile but you get the idea
https://imgur.com/gallery/L0R9M

I might take you up on that!

On another note though, I have talked to wei again and he said he might be able to find some good adhesives to connect the blockers to the side of the case after installing the pcb/plate thus making it so that there would be space for everything without having to cut or drill anything.
I have seriously fell in love with the 5degrees aesthetics so hopefully this works out!

Offline pratamawijaya

  • Posts: 3
Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
« Reply #384 on: Wed, 18 October 2017, 23:39:35 »
any update guys ?

Offline yasintahir

  • Formerly silentreader
  • Thread Starter
  • Posts: 291
  • Location: Indonesia
Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
« Reply #385 on: Fri, 20 October 2017, 06:23:05 »
Got update from leeku PCB will come next wednesday to him.
And case from KBDfans will come next wednesday too to my home.
Here's some picture of fitting case with PCB.
Seems we got extra 2 hole on bottom of case, but wei said it's just need grinding and case from kbdfans sent to me is fixed case.
I will give you picture when i get that.










Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 12275
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
« Reply #386 on: Fri, 20 October 2017, 13:24:30 »
Got update from leeku PCB will come next wednesday to him.
And case from KBDfans will come next wednesday too to my home.
Here's some picture of fitting case with PCB.
Seems we got extra 2 hole on bottom of case, but wei said it's just need grinding and case from kbdfans sent to me is fixed case.
I will give you picture when i get that.

Show Image


Show Image


Show Image


Show Image


Show Image


That's ****ing cool
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | ctrl.alt x GON 60% | TGR Alice | Mira SE #29 | Mira SE #34 | Revo One | z | Keycult No. 1 | AIS65 | First CW87 prototype | Mech27v1 | Camp C225 | Duck Orion V1 | LZ CLS sxh | Geon Frog TKL | Hiney TKL One | Geon Glare TKL



"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos, after I came back from a break | "Is Linkshine our Nixon?" -NAV | "Puddsy is the Puddsy of keebs" -ns90

Offline FoC_Tow

  • * Destiny Supporter
  • Posts: 1142
  • Location: Germany
  • Brokehlicious
Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
« Reply #387 on: Fri, 20 October 2017, 15:41:56 »
Got update from leeku PCB will come next wednesday to him.
And case from KBDfans will come next wednesday too to my home.
Here's some picture of fitting case with PCB.
Seems we got extra 2 hole on bottom of case, but wei said it's just need grinding and case from kbdfans sent to me is fixed case.
I will give you picture when i get that.

Show Image


Show Image


Show Image


Show Image


Show Image


That's ****ing cool

Dat pcb, so smexy O_O

Case looks great too! Still gotta message KBDfans for a black one =)

Offline C7Kinetic

  • Posts: 29
  • Location: Seattle
  • /u/ADJ_Reflex
Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
« Reply #388 on: Fri, 20 October 2017, 20:16:57 »
Is leeku also getting the plates next week, or are we still waiting for those to be finished?

Offline yasintahir

  • Formerly silentreader
  • Thread Starter
  • Posts: 291
  • Location: Indonesia
Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
« Reply #389 on: Sat, 21 October 2017, 00:41:44 »
Is leeku also getting the plates next week, or are we still waiting for those to be finished?

Seems like it will be arrived to leeku next week.
Production has been finsihing left.

Offline yasintahir

  • Formerly silentreader
  • Thread Starter
  • Posts: 291
  • Location: Indonesia
Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
« Reply #390 on: Sat, 21 October 2017, 01:35:09 »
Got update from leeku PCB will come next wednesday to him.
And case from KBDfans will come next wednesday too to my home.
Here's some picture of fitting case with PCB.
Seems we got extra 2 hole on bottom of case, but wei said it's just need grinding and case from kbdfans sent to me is fixed case.
I will give you picture when i get that.

Show Image


Show Image


Show Image


Show Image


Show Image


That's ****ing cool

Dat pcb, so smexy O_O

Case looks great too! Still gotta message KBDfans for a black one =)

I think you need to reanodized it self.
I have that plan if my purple one not darker enough lol.

Offline FoC_Tow

  • * Destiny Supporter
  • Posts: 1142
  • Location: Germany
  • Brokehlicious
Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
« Reply #391 on: Sat, 21 October 2017, 09:52:30 »
Someone suggested to just ask if  it's possible to get a black case, as it shouldn't cause too much trouble to send one on the production chain for black anodizing.

I'm just going to give it a shot and see if it's possible to get a black one =)

Offline Che.R.Ry

  • Posts: 38
  • geeks
Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
« Reply #392 on: Sun, 22 October 2017, 13:35:16 »
Got update from leeku PCB will come next wednesday to him.
And case from KBDfans will come next wednesday too to my home.
Here's some picture of fitting case with PCB.
Seems we got extra 2 hole on bottom of case, but wei said it's just need grinding and case from kbdfans sent to me is fixed case.
I will give you picture when i get that.

Show Image


Show Image


Show Image


Show Image


Show Image


homina homina homina :p
looks great :-*

Someone suggested to just ask if  it's possible to get a black case, as it shouldn't cause too much trouble to send one on the production chain for black anodizing.

I'm just going to give it a shot and see if it's possible to get a black one =)

yeah i wish kbdfans can give us more colour choice, giving "normal" colour option wont cost them that much i think

Offline yasintahir

  • Formerly silentreader
  • Thread Starter
  • Posts: 291
  • Location: Indonesia
Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
« Reply #393 on: Tue, 31 October 2017, 09:18:33 »
Small update :
PCB currently in progress to soldering USB connector and QC by leeku and it will be shiped to me this week.
For cases my case from KBDFans still stuck on custom clearence since 22 october and this is suck  :mad:

I have some picture for PCBs




Offline ppp

  • Posts: 158
  • Location: Mech
  • KappaKeepoKoopa
Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
« Reply #394 on: Tue, 31 October 2017, 09:50:20 »
[GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
>FINISHING

HYPEHYPEHYPEHYPEHYPEHYPEHYPEHYPE

Offline Che.R.Ry

  • Posts: 38
  • geeks
Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
« Reply #395 on: Tue, 31 October 2017, 13:02:00 »
Small update :
PCB currently in progress to soldering USB connector and QC by leeku and it will be shiped to me this week.
For cases my case from KBDFans still stuck on custom clearence since 22 october and this is suck  :mad:

I have some picture for PCBs

Show Image

Show Image

Show Image


HYPE IS REAL :p

Offline menuhin

  • Posts: 1225
  • Location: Germany
Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
« Reply #396 on: Tue, 31 October 2017, 20:14:50 »
Small update :
PCB currently in progress to soldering USB connector and QC by leeku and it will be shiped to me this week.
For cases my case from KBDFans still stuck on custom clearence since 22 october and this is suck  :mad:

I have some picture for PCBs

Show Image

Show Image

Show Image


Eagerly waiting for the PCBs.
Also for the news of how the KBDfans TINA-YAS62 case fits, so that I can finally place my order. :)
Wishlist: 1) nice thick Alps caps; 2) Cherry profile POM;
More
Wishful-list: 1) We order from keyboard-layout-editor.com; 2) usable Trackpoint module for all keyboards
IBM M13 black
NeXT non-ADB keyboard (AAE)
HHKB Pro 2 HasuBT
[~90WPM, in love with Emacs, and Lisp]

Offline dyoungc

  • Posts: 40
  • Location: New York, South Korea
Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
« Reply #397 on: Tue, 31 October 2017, 21:01:42 »
Looks awesome! It's great to see some progress of the GB. Are there any updates on the plates?
Silent, I mentioned a while ago about changing my shipping address. Is it still possible to do that?

Sent from my SM-G955U using Tapatalk


Offline yasintahir

  • Formerly silentreader
  • Thread Starter
  • Posts: 291
  • Location: Indonesia
Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
« Reply #398 on: Wed, 01 November 2017, 00:01:45 »
Looks awesome! It's great to see some progress of the GB. Are there any updates on the plates?
Silent, I mentioned a while ago about changing my shipping address. Is it still possible to do that?

Sent from my SM-G955U using Tapatalk



Sure your new address noted already :)

Offline ppp

  • Posts: 158
  • Location: Mech
  • KappaKeepoKoopa
Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
« Reply #399 on: Wed, 01 November 2017, 08:52:02 »
oh same here! I don't remember if I ever updated my address to you...