geekhack

geekhack Marketplace => Group Buys and Preorders => Topic started by: sennin32 on Sun, 24 February 2019, 02:10:53

Title: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: sennin32 on Sun, 24 February 2019, 02:10:53
[Update Mar 20 '19]
Hi,
We found we got some error paypal setting last week.
Some of orders can not go through.
This groupbuy will extend a week to late Mar :)
[End of Mar 20 '19]

Hey, everyone! I'm Shiang Yu from Doyu Studio.
This is group buy for Doyu Studio - Chiwi60 kit R2.

The Chiwi60  was conceived by the mechanical keyboard community member gok from New Zealand who named the keyboard after a colloquial term that was short for Chinese Kiwi.

The board is designed to have medium sized bezels with a 30 degree chamfer on the top face to provide visual interest to the most visible face of the keyboard.
30 degrees has been specifically chosen so that the top and side bezels still have presence from natural viewing angles despite the faces tapering away and also makes the keyboard appear shorter and sleeker.

The design aims to provide the keyboard with a seamless aesthetic and underglow that is integrated rather than just an afterthought.

A unique features of the keyboard are the optional dual 3u spacebar layout which allows for splitspace with convex spacebars rather than what you would usually have with the 2.25/1.25/2.75 split.

Buying page : Click or paste https://shopkey.doyustudio.com/dy01b6 (https://shopkey.doyustudio.com/dy01b6)


(https://imgur.com/1YhD5vU.jpg)

Pics
(https://imgur.com/9tMybs5.jpg)(https://imgur.com/itd8ukI.jpg)
(https://imgur.com/kDjZLH6.jpg)(https://imgur.com/3NrInCh.jpg)

Pic from geeks!
(https://imgur.com/zIUjzwm.jpg)(https://imgur.com/GehFssv.jpg)
(https://imgur.com/edXhHm4.jpg)(https://i.imgur.com/zugPt29.jpg)

See more images with larger size here!
PVD/DLC (https://imgur.com/a/EkshuPn)
Anodized (https://imgur.com/a/GKh8E)
Some more (https://imgur.com/a/8v2bG8y)
R1 products (https://imgur.com/a/JBtXdan)


Major changes in R2 :



Links :
Buying page : Check here (https://shopkey.doyustudio.com/dy01b6)
Interest Check Thread : https://geekhack.org/index.php?topic=92790.100 (https://geekhack.org/index.php?topic=92790.100)
Group buy thread of round 1 : https://geekhack.org/index.php?topic=93969.0 (https://geekhack.org/index.php?topic=93969.0)


Kit include :



Features/Specs/Design :




Surface finishing:



*Why not powercoating for white one?

1. ED offer a thinner and controllable coating layer
2. ED is much more even than powercoating
3. Lesser human work, stable quality, powercoating rely on worker skill more


Add-ons and Upgrades :
Wedged shape bottom design
(https://i.imgur.com/AZaSAOc.jpg)

Time frame & to do :
Collecting orders till : Mar 18 '19 Extend to late Mar
Est. deliver : Sep, '19
For more details please Find out on Trello (https://trello.com/c/zmal8bhR/1-chiwi-60-r2)



* stabilizer pack contains :


Things you might want to know / FAQs :
Title: Re: [GB] Doyu Studio - Chiwi60 kit - a 60% kit
Post by: sennin32 on Sun, 24 February 2019, 02:11:23
update : 2019 Feb :
Update imgur gallery for R1 products.
Add sandblasted raw stainless steel bottom into upgrade option.
Title: Re: [GB] Doyu Studio - Chiwi60 kit - a 60% kit
Post by: Signature on Sun, 24 February 2019, 11:02:29
Approved, Gl w GB!
Title: Re: [GB] Doyu Studio - Chiwi60 kit - a 60% kit
Post by: sandragm on Sun, 24 February 2019, 11:20:17
Which layout should I pick in order to include arrows?
Title: Re: [GB] Doyu Studio - Chiwi60 kit - a 60% kit
Post by: wixxzblu on Sun, 24 February 2019, 11:30:49
I have the R1 chiwi, and it surprisingly is one of my best sounding board even tho others have said it sounded hollow, just wishing i could get my hands on the 6u hhbk variant this round, but it looks like this option have been scrapped.
Title: Re: [GB] Doyu Studio - Chiwi60 kit - a 60% kit
Post by: sennin32 on Sun, 24 February 2019, 12:05:12
Quote from: Signature on Sun, 24 February 2019, 11:02:29
Approved, Gl w GB!
Thank you :)
Title: Re: [GB] Doyu Studio - Chiwi60 kit - a 60% kit
Post by: sennin32 on Sun, 24 February 2019, 12:06:24
Quote from: sandragm on Sun, 24 February 2019, 11:20:17
Which layout should I pick in order to include arrows?
HHKB has no arrow.
The rest has it.
Title: Re: [GB] Doyu Studio - Chiwi60 kit - a 60% kit
Post by: F2F4 on Sun, 24 February 2019, 13:28:05
Can I do split space hhkb?
Title: Re: [GB] Doyu Studio - Chiwi60 kit - a 60% kit
Post by: tunadesu on Sun, 24 February 2019, 15:01:33
Any pictures of the Tiffany ano? I think it may be the wrong pic on the site when you choose the option
Title: Re: [GB] Doyu Studio - Chiwi60 kit - a 60% kit
Post by: gok_nz on Sun, 24 February 2019, 16:49:38
Quote from: wixxzblu on Sun, 24 February 2019, 11:30:49
I have the R1 chiwi, and it surprisingly is one of my best sounding board even tho others have said it sounded hollow, just wishing i could get my hands on the 6u hhbk variant this round, but it looks like this option have been scrapped.
I built a tsangan layout chiwi and I understand what you mean about the spacebar being thocky but I think you would lose it if the spacebar is shifted to the left since the switch would be close to the mounting point and make the spacebar sound less consistent.
Title: Re: [GB] Doyu Studio - Chiwi60 kit - a 60% kit
Post by: Minterly on Sun, 24 February 2019, 22:25:20
What are the differences in the bottom upgrades?
Title: Re: [GB] Doyu Studio - Chiwi60 kit - a 60% kit
Post by: sennin32 on Mon, 25 February 2019, 12:12:21
Quote from: Minterly on Sun, 24 February 2019, 22:25:20
What are the differences in the bottom upgrades?
1. 7 deg bottom : For better dsound
2. brass bottom : for those who want full metal kbs



Quote from: tunadesu on Sun, 24 February 2019, 15:01:33
Any pictures of the Tiffany ano? I think it may be the wrong pic on the site when you choose the option

work now :)
gallery updated.
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: joe405 on Mon, 25 February 2019, 23:59:50
Will this work with other USB-C 60% PCBs? Would you add a no PCB option?
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: sennin32 on Thu, 28 February 2019, 03:13:50
Quote from: joe405 on Mon, 25 February 2019, 23:59:50
Will this work with other USB-C 60% PCBs? Would you add a no PCB option?
Both answer is no.
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: ReAvenger on Thu, 28 February 2019, 06:22:08
If I opt for the DLC bottom as an upgrade, is there a way to get the regular pc bottom as well?
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: gok_nz on Thu, 28 February 2019, 11:53:56
Quote from: ReAvenger on Thu, 28 February 2019, 06:22:08
If I opt for the DLC bottom as an upgrade, is there a way to get the regular pc bottom as well?
You can contact sennin for custom orders like that.
Title: Re: [GB] Doyu Studio - Chiwi60 kit - a 60% kit
Post by: Minterly on Thu, 28 February 2019, 16:02:18
Quote from: sennin32 on Mon, 25 February 2019, 12:12:21
Quote from: Minterly on Sun, 24 February 2019, 22:25:20
What are the differences in the bottom upgrades?
1. 7 deg bottom : For better dsound
2. brass bottom : for those who want full metal kbs.

is brass bottom PVD/DLC option?

edit: I'd also be interested in PC bottom + upgraded option.
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: Bizpit on Thu, 28 February 2019, 18:34:59
That Stainless Steel DLC Black option looks fantastic. I'd be all over this if it wasn't a 60%.

Any pictures of the 7 degree PC base vs the stock base?
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: sennin32 on Thu, 28 February 2019, 21:07:59
Quote from: Bizpit on Thu, 28 February 2019, 18:34:59
That Stainless Steel DLC Black option looks fantastic. I'd be all over this if it wasn't a 60%.

Any pictures of the 7 degree PC base vs the stock base?
Image added

Quote from: Minterly on Thu, 28 February 2019, 16:02:18
Quote from: sennin32 on Mon, 25 February 2019, 12:12:21
Quote from: Minterly on Sun, 24 February 2019, 22:25:20
What are the differences in the bottom upgrades?
1. 7 deg bottom : For better dsound
2. brass bottom : for those who want full metal kbs.

is brass bottom PVD/DLC option?

edit: I'd also be interested in PC bottom + upgraded option.
Hi,
there's 2 options of stainless bottom.
1 is raw with lower price, and the other one is DLC.

Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: Minterly on Thu, 28 February 2019, 21:16:44
Quote from: sennin32 on Thu, 28 February 2019, 21:07:59
Quote from: Minterly on Thu, 28 February 2019, 16:02:18
Quote from: sennin32 on Mon, 25 February 2019, 12:12:21
Quote from: Minterly on Sun, 24 February 2019, 22:25:20
What are the differences in the bottom upgrades?]
1. 7 deg bottom : For better dsound
2. brass bottom : for those who want full metal kbs.

is brass bottom PVD/DLC option?

edit: I'd also be interested in PC bottom + upgraded option.
Hi,
there's 2 options of stainless bottom.
1 is raw with lower price, and the other one is DLC.
sweet. any way to add extra bottom? kinda want the PC & DLC
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: voight-kampff on Mon, 04 March 2019, 10:18:09
Hi

can I use holties with the DO60 pcb?

thanks
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: voight-kampff on Wed, 06 March 2019, 06:12:23
How can I modify my order please?

Sent from my MIX using Tapatalk

Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: menuhin on Wed, 06 March 2019, 06:22:40
If I cannot join this round, when will be the next round?
I really need the HHKB 6u layout - there are only 1 or 2 keyboard kit that support this true HHKB layout for now.
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: sennin32 on Wed, 06 March 2019, 23:54:44
Quote from: voight-kampff on Wed, 06 March 2019, 06:12:23
How can I modify my order please?

Sent from my MIX using Tapatalk



msg me or mail sy_yang@doyustudio.com

Quote from: voight-kampff on Mon, 04 March 2019, 10:18:09
Hi

can I use holties with the DO60 pcb?

thanks

some pads is cut by others, might not stable enough.
Otherwise, it should work nice.
new pcb will not solve this problem(PADs are cut and not complete), although we reduced layout, it still a lot.

Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: sennin32 on Wed, 20 March 2019, 21:54:15
Hi, guys!
We found we got some error paypal setting during last week.
Some of orders can not go through.
This groupbuy will extend a week to late Mar :)
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: voight-kampff on Thu, 21 March 2019, 00:45:50
How can I see if my order is O.K.?
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: tex_live_utility on Thu, 21 March 2019, 01:05:12
Will the 6u HHKB top support the 2x3u Split layout?
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: voight-kampff on Thu, 21 March 2019, 03:51:47
Quote from: tex_live_utility on Thu, 21 March 2019, 01:05:12
Will the 6u HHKB top support the 2x3u Split layout?

7u is supported. So no 6u I quess
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: menuhin on Thu, 21 March 2019, 06:39:40
Quote from: voight-kampff on Thu, 21 March 2019, 03:51:47
Quote from: tex_live_utility on Thu, 21 March 2019, 01:05:12
Will the 6u HHKB top support the 2x3u Split layout?

7u is supported. So no 6u I quess

No 6u HHKB top???

I don't need to care about this GB anymore - and 7u top HHKB are also everywhere
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: Blank on Thu, 21 March 2019, 07:07:16
Does the Doyu split also support ISO layout?
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: voight-kampff on Thu, 21 March 2019, 07:10:24
I am really in into the sandblasted steel DLC version
it will be a really special board
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: Blank on Thu, 21 March 2019, 07:54:19
Is the RGB visible with the PVD/DLC bottom upgrade? Any pictures with that?
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: tex_live_utility on Thu, 21 March 2019, 09:41:32
Quote from: menuhin on Thu, 21 March 2019, 06:39:40
Quote from: voight-kampff on Thu, 21 March 2019, 03:51:47
Quote from: tex_live_utility on Thu, 21 March 2019, 01:05:12
Will the 6u HHKB top support the 2x3u Split layout?

7u is supported. So no 6u I quess

No 6u HHKB top???

I don't need to care about this GB anymore - and 7u top HHKB are also everywhere

The 6u top is right there on the store page. I think he just means you can't use the 2x3u spacebars with the 6u top.
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: kakiharaOne on Thu, 21 March 2019, 12:29:12
Has there been any updates to the plate since R1?  Not sure how big of an issue it was but apparently there was a bit of play when inserting the switch. Also will there be better QC on the plate finish? Most videos and photos I’ve seen have heeps of scratches.

Can anyone with an R1 confirm if these were real issues or just minor?
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: voight-kampff on Thu, 21 March 2019, 13:49:40
QC should be good now. They produce this in Taiwan with companies nearer to Doyu Studio, so it is easier and faster for QC.
I talked to Gok some days earlier, he said the plates will be changed to eliminate the problems.

Quote from: kakiharaOne on Thu, 21 March 2019, 12:29:12
Has there been any updates to the plate since R1?  Not sure how big of an issue it was but apparently there was a bit of play when inserting the switch. Also will there be better QC on the plate finish? Most videos and photos I’ve seen have heeps of scratches.

Can anyone with an R1 confirm if these were real issues or just minor?
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: kakiharaOne on Thu, 21 March 2019, 14:08:33
Quote from: voight-kampff on Thu, 21 March 2019, 13:49:40
QC should be good now. They produce this in Taiwan with companies nearer to Doyu Studio, so it is easier and faster for QC.
I talked to Gok some days earlier, he said the plates will be changed to eliminate the problems.

Was on the fence for those concerns so thanks for the feedback!
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: DubbleYew on Thu, 21 March 2019, 18:08:49
Quote from: tex_live_utility on Thu, 21 March 2019, 09:41:32
Quote from: menuhin on Thu, 21 March 2019, 06:39:40
Quote from: voight-kampff on Thu, 21 March 2019, 03:51:47
Quote from: tex_live_utility on Thu, 21 March 2019, 01:05:12
Will the 6u HHKB top support the 2x3u Split layout?

7u is supported. So no 6u I quess

No 6u HHKB top???

I don't need to care about this GB anymore - and 7u top HHKB are also everywhere

The 6u top is right there on the store page. I think he just means you can't use the 2x3u spacebars with the 6u top.
Pretty sure you can do 2x3u. I found this while I was doing my pre-buy research.

https://www.reddit.com/r/MechanicalKeyboards/comments/7wquzp/chiwi60_hhkb_body


https://imgur.com/FaBbFy1.jpg

Sennin posted the second imgur link and it shows 2x3u is supported.

Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: tex_live_utility on Thu, 21 March 2019, 21:48:12
Quote from: DubbleYew on Thu, 21 March 2019, 18:08:49
Quote from: tex_live_utility on Thu, 21 March 2019, 09:41:32
Quote from: menuhin on Thu, 21 March 2019, 06:39:40
Quote from: voight-kampff on Thu, 21 March 2019, 03:51:47
Quote from: tex_live_utility on Thu, 21 March 2019, 01:05:12
Will the 6u HHKB top support the 2x3u Split layout?

7u is supported. So no 6u I quess

No 6u HHKB top???

I don't need to care about this GB anymore - and 7u top HHKB are also everywhere

The 6u top is right there on the store page. I think he just means you can't use the 2x3u spacebars with the 6u top.
Pretty sure you can do 2x3u. I found this while I was doing my pre-buy research.

https://www.reddit.com/r/MechanicalKeyboards/comments/7wquzp/chiwi60_hhkb_body


https://imgur.com/FaBbFy1.jpg

Sennin posted the second imgur link and it shows 2x3u is supported.

Thanks.

Sennin, can you confirm that this layout is possible?

(https://imgur.com/FaBbFy1.jpg)

Edit: just talked to him on Discord, it's NOT possible. Look at the position of the switch cutouts -- the blocker would interfere with the switches.
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: sennin32 on Thu, 21 March 2019, 23:59:36
Quote from: Blank on Thu, 21 March 2019, 07:07:16
Does the Doyu split also support ISO layout?

Hi, No, sorry :(
It only support ANSI enter.

Quote from: tex_live_utility on Thu, 21 March 2019, 09:41:32
Quote from: menuhin on Thu, 21 March 2019, 06:39:40
Quote from: voight-kampff on Thu, 21 March 2019, 03:51:47
Quote from: tex_live_utility on Thu, 21 March 2019, 01:05:12
Will the 6u HHKB top support the 2x3u Split layout?
Hi,
PCB support it.
But we make 7u HHKB this time.
Since we've made 6u in R1. Give 7u a shot!

7u is supported. So no 6u I quess

No 6u HHKB top???

I don't need to care about this GB anymore - and 7u top HHKB are also everywhere

The 6u top is right there on the store page. I think he just means you can't use the 2x3u spacebars with the 6u top.

Quote from: Blank on Thu, 21 March 2019, 07:54:19
Is the RGB visible with the PVD/DLC bottom upgrade? Any pictures with that?
Hi,
RGB will be blocked if you chose a full metal bottom upgrade.


Quote from: menuhin on Thu, 21 March 2019, 06:39:40
Quote from: voight-kampff on Thu, 21 March 2019, 03:51:47
Quote from: tex_live_utility on Thu, 21 March 2019, 01:05:12
Will the 6u HHKB top support the 2x3u Split layout?

7u is supported. So no 6u I quess

No 6u HHKB top???

I don't need to care about this GB anymore - and 7u top HHKB are also everywhere
Sorry, we offer 7u this time.

Quote from: kakiharaOne on Thu, 21 March 2019, 12:29:12
Has there been any updates to the plate since R1?  Not sure how big of an issue it was but apparently there was a bit of play when inserting the switch. Also will there be better QC on the plate finish? Most videos and photos I’ve seen have heeps of scratches.

Can anyone with an R1 confirm if these were real issues or just minor?
It did has scratches on the plate during R1.
We modified some designs of plate.
Make it easier to do surface processing easier by reducing holes on.
Also, we find another manufacturer to make some brass parts samples.
Although the sample is not good because of too many times rework.
(grind too many times, inner side does not process properly in the beginning and it is hard to do it correctly again)
Surface treatment is pretty nice though except some impure spot.
Those lighter spot is easy to find with black DLC coating, that's why we use stainless steel to avoid it this time.
Plate is still brass. But gold is lighter, the spot with lighter color is not easy to find.
For scratches, new manufacturer is in Taiwan, we can compare and visit more companies which we've done and make decision.
Also we're able to monitor manufacturing and check for major steps before it finished.
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: sennin32 on Fri, 22 March 2019, 00:08:07
Quote from: tex_live_utility on Thu, 21 March 2019, 21:48:12
Quote from: DubbleYew on Thu, 21 March 2019, 18:08:49
Quote from: tex_live_utility on Thu, 21 March 2019, 09:41:32
Quote from: menuhin on Thu, 21 March 2019, 06:39:40
Quote from: voight-kampff on Thu, 21 March 2019, 03:51:47
Quote from: tex_live_utility on Thu, 21 March 2019, 01:05:12
Will the 6u HHKB top support the 2x3u Split layout?

7u is supported. So no 6u I quess

No 6u HHKB top???

I don't need to care about this GB anymore - and 7u top HHKB are also everywhere

The 6u top is right there on the store page. I think he just means you can't use the 2x3u spacebars with the 6u top.
Pretty sure you can do 2x3u. I found this while I was doing my pre-buy research.

https://www.reddit.com/r/MechanicalKeyboards/comments/7wquzp/chiwi60_hhkb_body


https://imgur.com/FaBbFy1.jpg

Sennin posted the second imgur link and it shows 2x3u is supported.

Thanks.

Sennin, can you confirm that this layout is possible?

Show Image
(https://imgur.com/FaBbFy1.jpg)


Edit: just talked to him on Discord, it's NOT possible. Look at the position of the switch cutouts -- the blocker would interfere with the switches.

Quote from: DubbleYew on Thu, 21 March 2019, 18:08:49
Quote from: tex_live_utility on Thu, 21 March 2019, 09:41:32
Quote from: menuhin on Thu, 21 March 2019, 06:39:40
Quote from: voight-kampff on Thu, 21 March 2019, 03:51:47
Quote from: tex_live_utility on Thu, 21 March 2019, 01:05:12
Will the 6u HHKB top support the 2x3u Split layout?

7u is supported. So no 6u I quess

No 6u HHKB top???

I don't need to care about this GB anymore - and 7u top HHKB are also everywhere

The 6u top is right there on the store page. I think he just means you can't use the 2x3u spacebars with the 6u top.
Pretty sure you can do 2x3u. I found this while I was doing my pre-buy research.

https://www.reddit.com/r/MechanicalKeyboards/comments/7wquzp/chiwi60_hhkb_body


https://imgur.com/FaBbFy1.jpg

Sennin posted the second imgur link and it shows 2x3u is supported.



Hi,
Sorry, this layout is available in R1.
We offer 7u HHKB in R2.
Quantity is not enough, we can't make 2 at the same time.
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: DubbleYew on Fri, 22 March 2019, 04:19:14
Quote from: sennin32 on Fri, 22 March 2019, 00:08:07
Quote from: tex_live_utility on Thu, 21 March 2019, 21:48:12
Quote from: DubbleYew on Thu, 21 March 2019, 18:08:49
Quote from: tex_live_utility on Thu, 21 March 2019, 09:41:32
Quote from: menuhin on Thu, 21 March 2019, 06:39:40
Quote from: voight-kampff on Thu, 21 March 2019, 03:51:47
Quote from: tex_live_utility on Thu, 21 March 2019, 01:05:12
Will the 6u HHKB top support the 2x3u Split layout?

7u is supported. So no 6u I quess

No 6u HHKB top???

I don't need to care about this GB anymore - and 7u top HHKB are also everywhere

The 6u top is right there on the store page. I think he just means you can't use the 2x3u spacebars with the 6u top.
Pretty sure you can do 2x3u. I found this while I was doing my pre-buy research.

https://www.reddit.com/r/MechanicalKeyboards/comments/7wquzp/chiwi60_hhkb_body


https://imgur.com/FaBbFy1.jpg

Sennin posted the second imgur link and it shows 2x3u is supported.

Thanks.

Sennin, can you confirm that this layout is possible?

Show Image
(https://imgur.com/FaBbFy1.jpg)


Edit: just talked to him on Discord, it's NOT possible. Look at the position of the switch cutouts -- the blocker would interfere with the switches.

Quote from: DubbleYew on Thu, 21 March 2019, 18:08:49
Quote from: tex_live_utility on Thu, 21 March 2019, 09:41:32
Quote from: menuhin on Thu, 21 March 2019, 06:39:40
Quote from: voight-kampff on Thu, 21 March 2019, 03:51:47
Quote from: tex_live_utility on Thu, 21 March 2019, 01:05:12
Will the 6u HHKB top support the 2x3u Split layout?

7u is supported. So no 6u I quess

No 6u HHKB top???

I don't need to care about this GB anymore - and 7u top HHKB are also everywhere

The 6u top is right there on the store page. I think he just means you can't use the 2x3u spacebars with the 6u top.
Pretty sure you can do 2x3u. I found this while I was doing my pre-buy research.

https://www.reddit.com/r/MechanicalKeyboards/comments/7wquzp/chiwi60_hhkb_body


https://imgur.com/FaBbFy1.jpg

Sennin posted the second imgur link and it shows 2x3u is supported.



Hi,
Sorry, this layout is available in R1.
We offer 7u HHKB in R2.
Quantity is not enough, we can't make 2 at the same time.
So there is no option for 6u HHKB at all? This is an option on the buying page and I have already paid for it.

Sent from my SM-G955F using Tapatalk

Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: osamine on Sat, 23 March 2019, 15:22:55
Does the chiwi60 support usb c to usb c?
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: Aerizu on Sat, 23 March 2019, 18:05:07
Quote from: DubbleYew on Fri, 22 March 2019, 04:19:14
Quote from: sennin32 on Fri, 22 March 2019, 00:08:07
Hi,
Sorry, this layout is available in R1.
We offer 7u HHKB in R2.
Quantity is not enough, we can't make 2 at the same time.
So there is no option for 6u HHKB at all? This is an option on the buying page and I have already paid for it.

Sent from my SM-G955F using Tapatalk

Can you clarify if you will be offering 6u HHKB top for R2? Thanks!
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: sennin32 on Sun, 24 March 2019, 02:50:13
Quote from: Aerizu on Sat, 23 March 2019, 18:05:07
Quote from: DubbleYew on Fri, 22 March 2019, 04:19:14
Quote from: sennin32 on Fri, 22 March 2019, 00:08:07
Hi,
Sorry, this layout is available in R1.
We offer 7u HHKB in R2.
Quantity is not enough, we can't make 2 at the same time.
So there is no option for 6u HHKB at all? This is an option on the buying page and I have already paid for it.

Sent from my SM-G955F using Tapatalk

Can you clarify if you will be offering 6u HHKB top for R2? Thanks!
Might not be.
It has to be 10 pcs at least for each color...
If stainless orders are not enough.
We might make some origin HHKB layout and sell them later.
Won't make dessicion before May, unless there's 10 people want the same color for layout not that popular.
It's a little difficult, the only option might work should be white ED and stainless.
 But we will not order extra aluminum since the MoQ is not as hard to reach as stainless one.

Quote from: osamine on Sat, 23 March 2019, 15:22:55
Does the chiwi60 support usb c to usb c?
Yes, it does have issue during R1 sampling.
But we've fixed it before R1.
It won't have issue in R2.

Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: gordonderp on Tue, 26 March 2019, 03:19:43
Did the black chiwi reach the moq?
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: sennin32 on Tue, 26 March 2019, 03:49:05
Quote from: gordonderp on Tue, 26 March 2019, 03:19:43
Did the black chiwi reach the moq?
Stainless?
Around 10 short @Q@
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: gordonderp on Tue, 26 March 2019, 04:24:09
Quote from: sennin32 on Tue, 26 March 2019, 03:49:05
Quote from: gordonderp on Tue, 26 March 2019, 03:19:43
Did the black chiwi reach the moq?
Stainless?
Around 10 short @Q@

Nah just the normal allu one
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: sennin32 on Sun, 31 March 2019, 03:25:07
Quote from: gordonderp on Tue, 26 March 2019, 04:24:09
Quote from: sennin32 on Tue, 26 March 2019, 03:49:05
Quote from: gordonderp on Tue, 26 March 2019, 03:19:43
Did the black chiwi reach the moq?
Stainless?
Around 10 short @Q@

Nah just the normal allu one

Not reach MoQ, but only few pcs short.
I'm asking if manufacturer are willing to make it.
White is okay, tiffany blue will cancel.
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: sennin32 on Sun, 31 March 2019, 03:38:01
Two days left from GB ends!
If you love this kit but not yet join it.
Check it now!

We'll make 15 kits of origin HHKB layout (with 6u space) with stainless steel.
Join group buy if you are interested in it :)

CHiwi60 : https://shopkey.doyustudio.com/projects/chiwi60 (https://shopkey.doyustudio.com/projects/chiwi60)
Buying page : https://shopkey.doyustudio.com/dy01b6 (https://shopkey.doyustudio.com/dy01b6)
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: gordonderp on Sun, 31 March 2019, 03:54:55
Quote from: sennin32 on Sun, 31 March 2019, 03:25:07
Quote from: gordonderp on Tue, 26 March 2019, 04:24:09
Quote from: sennin32 on Tue, 26 March 2019, 03:49:05
Quote from: gordonderp on Tue, 26 March 2019, 03:19:43
Did the black chiwi reach the moq?
Stainless?
Around 10 short @Q@

Nah just the normal allu one

Not reach MoQ, but only few pcs short.
I'm asking if manufacturer are willing to make it.
White is okay, tiffany blue will cancel.

If the black one doesn't reach moq I down to change to the white if that's possible
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: voight-kampff on Sun, 31 March 2019, 04:26:14
wow, there is a 6u hhkb steel version awaible
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: Von Steve on Sun, 31 March 2019, 05:29:39
what's the difference between the stock bottom pc plate and the 7 one?
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: voight-kampff on Sun, 31 March 2019, 05:33:01
Quote from: Von Steve on Sun, 31 March 2019, 05:29:39
what's the difference between the stock bottom pc plate and the 7 one?

the 7 degree bottom plate fills the space in the keyboard case. So you get an other sounding case
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: Von Steve on Sun, 31 March 2019, 05:52:08
Quote from: voight-kampff on Sun, 31 March 2019, 05:33:01
Quote from: Von Steve on Sun, 31 March 2019, 05:29:39
what's the difference between the stock bottom pc plate and the 7 one?

the 7 degree bottom plate fills the space in the keyboard case. So you get an other sounding case


Do we get the normal bottom plate as well if we order the 7 deg?
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: voight-kampff on Sun, 31 March 2019, 15:22:52
Quote from: Von Steve on Sun, 31 March 2019, 05:52:08
Deg. 7 is an upgrade, so no, but you can have an extra if you message Sennin.


 
Quote from: voight-kampff on Sun, 31 March 2019, 05:33:01
Quote from: Von Steve on Sun, 31 March 2019, 05:29:39
what's the difference between the stock bottom pc plate and the 7 one?

the 7 degree bottom plate fills the space in the keyboard case. So you get an other sounding case


Do we get the normal bottom plate as well if we order the 7 deg?
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: osamine on Wed, 03 April 2019, 02:38:50
Is it possible to cancel my order?
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: gordonderp on Sat, 11 May 2019, 08:05:28
Any updates on the group buy?
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: sennin32 on Sat, 11 May 2019, 08:07:32
Quote from: gordonderp on Sat, 11 May 2019, 08:05:28
Any updates on the group buy?
Hi,
Out 1st sample of PCB has a power supply error.
And we're making 2nd sample :)
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: sennin32 on Mon, 13 May 2019, 00:19:06
Sorry,
But please don't keep asking for modifying orders...
The quantity is still changing every week now.
We'd love to help you guys to meet your requirement, but if the quantity keeps changing.
We're not able to place the case order before quantity confirmation.
It's not a lot, we can't afford too many extra or cancelation after place the order.
And we can't just ignore requests, cause PayPal will simply refund if buyer open request...
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: osamine on Mon, 27 May 2019, 10:10:12
Quote from: sennin32 on Mon, 13 May 2019, 00:19:06
Sorry,
But please don't keep asking for modifying orders...
The quantity is still changing every week now.
We'd love to help you guys to meet your requirement, but if the quantity keeps changing.
We're not able to place the case order before quantity confirmation.
It's not a lot, we can't afford too many extra or cancelation after place the order.
And we can't just ignore requests, cause PayPal will simply refund if buyer open request...
Understood. Ill be keeping the order.
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: Blank on Tue, 28 May 2019, 05:24:32
Is it still possible to join this group buy as it seems that the website is still open for orders?
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: sennin32 on Sun, 02 June 2019, 00:54:23
Quote from: Blank on Tue, 28 May 2019, 05:24:32
Is it still possible to join this group buy as it seems that the website is still open for orders?
Sorry.
We don't accept orders now.
It is because of I enable back order.
So people can still order it even the quantity is 0.
And it's universal parameter.
I can't disable for only one listing without extra extensions.
To let people see all the options, I didn't disable entire listing.
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: mog_genius88 on Fri, 05 July 2019, 09:03:35
Selling gb spot. E white, hhkb, stabs.  Base price is $177. Shipping and pp fees pending region
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: sennin32 on Sun, 14 July 2019, 01:38:30
Hi,
CNC is processing and should finish in 1 month.
But we got a concern that screw in stabs might not available yet by then.
We'll contact people who bought stabs and ask if you prefer refund or change stabs if still no news when we're ready to ship :)
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: osamine on Thu, 18 July 2019, 10:57:05
Quote from: sennin32 on Sun, 14 July 2019, 01:38:30
Hi,
CNC is processing and should finish in 1 month.
But we got a concern that screw in stabs might not available yet by then.
We'll contact people who bought stabs and ask if you prefer refund or change stabs if still no news when we're ready to ship :)
Any pictures available? Or any updates on when it might ship.


Sent from my iPhone using Tapatalk Pro
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: sennin32 on Thu, 18 July 2019, 19:03:40
Quote from: osamine on Thu, 18 July 2019, 10:57:05
Quote from: sennin32 on Sun, 14 July 2019, 01:38:30
Hi,
CNC is processing and should finish in 1 month.
But we got a concern that screw in stabs might not available yet by then.
We'll contact people who bought stabs and ask if you prefer refund or change stabs if still no news when we're ready to ship :)
Any pictures available? Or any updates on when it might ship.


Sent from my iPhone using Tapatalk Pro
Yes, will update some pics later when receive.
We just got update for stabs this week as we mentioned in stabs GB.
They should arrive in 6-8 weeks.
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: osamine on Fri, 19 July 2019, 17:39:51
Quote from: sennin32 on Thu, 18 July 2019, 19:03:40
Quote from: osamine on Thu, 18 July 2019, 10:57:05
Quote from: sennin32 on Sun, 14 July 2019, 01:38:30
Hi,
CNC is processing and should finish in 1 month.
But we got a concern that screw in stabs might not available yet by then.
We'll contact people who bought stabs and ask if you prefer refund or change stabs if still no news when we're ready to ship :)
Any pictures available? Or any updates on when it might ship.


Sent from my iPhone using Tapatalk Pro
Yes, will update some pics later when receive.
We just got update for stabs this week as we mentioned in stabs GB.
They should arrive in 6-8 weeks.

I didnt get stabs does that mean we get it sooner?


Sent from my iPhone using Tapatalk Pro
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: evorus5 on Sat, 20 July 2019, 02:26:43
Can we still order since the site let's us?
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: gordonderp on Sat, 20 July 2019, 03:39:24
Quote from: evorus5 on Sat, 20 July 2019, 02:26:43
Can we still order since the site let's us?

Somebody asked in the discord and the answer was no unfortunately
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: osamine on Sun, 21 July 2019, 19:50:22
Quote from: gordonderp on Sat, 20 July 2019, 03:39:24
Quote from: evorus5 on Sat, 20 July 2019, 02:26:43
Can we still order since the site let's us?

Somebody asked in the discord and the answer was no unfortunately
Any link to the discord I dont see any here.


Sent from my iPhone using Tapatalk Pro
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: sennin32 on Tue, 23 July 2019, 08:26:34
Quote from: osamine on Sun, 21 July 2019, 19:50:22
Quote from: gordonderp on Sat, 20 July 2019, 03:39:24
Quote from: evorus5 on Sat, 20 July 2019, 02:26:43
Can we still order since the site let's us?

Somebody asked in the discord and the answer was no unfortunately
Any link to the discord I dont see any here.


Sent from my iPhone using Tapatalk Pro

Here it is : https://discord.gg/DjsHqE
:)
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: heavyheaded on Wed, 07 August 2019, 12:03:10
How is this progressing?
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: ramnes on Mon, 26 August 2019, 07:13:15
(https://imgur.com/edXhHm4.jpg)

Wait, what's up with this pic? Is this case/plate compatible with PFU HHKB PCBs and Topre housings?!
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: Draxion on Mon, 26 August 2019, 14:33:08
Oof got into hobby too late and missed this rip. Waiting for R3 then.
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: Aerizu on Mon, 26 August 2019, 19:01:52
Quote from: ramnes on Mon, 26 August 2019, 07:13:15
Show Image
(https://imgur.com/edXhHm4.jpg)


Wait, what's up with this pic? Is this case/plate compatible with PFU HHKB PCBs and Topre housings?!

I believe it's an MX HHKB layout with 6u spacebar and assymetric blockers. Not meant as an aftermarket case for Topre HHKB.
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: Kokaloo on Wed, 04 September 2019, 20:47:32
When I go to the website, I'm able to order as it says everything is in stock, am I still able to order a kit?
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: Draxion on Wed, 04 September 2019, 21:38:56
Quote from: Kokaloo on Wed, 04 September 2019, 20:47:32
When I go to the website, I'm able to order as it says everything is in stock, am I still able to order a kit?

Look at the number you have to order... You can't order 1
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: osamine on Mon, 09 September 2019, 01:11:47
So is this an exit scam or? No updates whatsoever.


Sent from my iPhone using Tapatalk Pro
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: nulltorious on Mon, 09 September 2019, 04:29:18
Quote from: osamine on Mon, 09 September 2019, 01:11:47
So is this an exit scam or? No updates whatsoever.


Sent from my iPhone using Tapatalk Pro

Some updates posted in Discord:
https://discord.gg/fpXpcN
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: DubbleYew on Wed, 11 September 2019, 05:43:18
Quote from: nulltorious on Mon, 09 September 2019, 04:29:18
Quote from: osamine on Mon, 09 September 2019, 01:11:47
So is this an exit scam or? No updates whatsoever.


Sent from my iPhone using Tapatalk Pro

Some updates posted in Discord:
https://discord.gg/fpXpcN

Would you mind sharing? I can't see anything in the doyu discord.
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: nulltorious on Wed, 11 September 2019, 06:42:48
Latest update was they were still in CNC
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: Fallakin on Wed, 11 September 2019, 08:32:34
Quote from: osamine on Mon, 09 September 2019, 01:11:47
So is this an exit scam or? No updates whatsoever.


Sent from my iPhone using Tapatalk Pro

Updates from Sennin are usually few and far between, best case is hitting up the Duyo discord someone else in here linked. Chiwi R1 was similar, but the end product was perfect.
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: osamine on Wed, 11 September 2019, 15:35:02
Quote from: Fallakin on Wed, 11 September 2019, 08:32:34
Quote from: osamine on Mon, 09 September 2019, 01:11:47
So is this an exit scam or? No updates whatsoever.


Sent from my iPhone using Tapatalk Pro

Updates from Sennin are usually few and far between, best case is hitting up the Duyo discord someone else in here linked. Chiwi R1 was similar, but the end product was perfect.

I did and they have pretty much been silent.


Sent from my iPhone using Tapatalk Pro
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: sennin32 on Tue, 01 October 2019, 05:48:31
Tragedy T_T
The manufacturer told me delivering of the case will be mid-Nov......
PCB and other parts have finished and been waiting for a while T_T
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: tex_live_utility on Tue, 12 November 2019, 08:53:50
Any update from the manufacturer? Really looking forward to this.
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: obtuse on Thu, 12 December 2019, 09:12:38
Any update on this?
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: tex_live_utility on Thu, 12 December 2019, 15:48:25
Quote from: obtuse on Thu, 12 December 2019, 09:12:38
Any update on this?

One month later...
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: osamine on Fri, 13 December 2019, 19:51:41
Quote from: tex_live_utility on Thu, 12 December 2019, 15:48:25
Quote from: obtuse on Thu, 12 December 2019, 09:12:38
Any update on this?

One month later...
lol
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: obtuse on Sat, 14 December 2019, 15:06:41
From the Doyu Studio discord, on dec 10:

Code: [Select]
Sennin32: Last reply is they’ll deliver the case during dec 16-20
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: sennin32 on Fri, 20 December 2019, 05:08:18
Quote from: obtuse on Sat, 14 December 2019, 15:06:41
From the Doyu Studio discord, on dec 10:

Code: [Select]
Sennin32: Last reply is they’ll deliver the case during dec 16-20
They delayed= =
I got reply this morning saying that they are working hard on it ha :eek:
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: buyinggirlfriend on Sun, 02 February 2020, 03:22:25
Any update on the keyboard.
Also is there a way to join the discord for more frequent updates?
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: obtuse on Thu, 10 September 2020, 10:34:02
Quote from: buyinggirlfriend on Sun, 02 February 2020, 03:22:25
Any update on the keyboard.
Also is there a way to join the discord for more frequent updates?

Discord: https://discord.gg/PXDfmu

Not that there really are any updates on there....

Looks like the last time Sennin32 wrote in the discord was in like July (user is Online, don't know what that really means when it comes to discord), and people have been asking for updates ever since without getting any answers or replies. Sennin32 was last active here on GH in May 1...
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: gnho on Sun, 29 November 2020, 08:54:50
Anyone may be interested in purchasing an R1? I am considering letting mine go below GB price. Please PM me if you're interested.
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: tex_live_utility on Fri, 16 April 2021, 13:34:05
Sup? We keep getting vague updates in Discord that plates will eventually be made.

When?

Who cares about plates?

You've already published the plate file (thanks for that, btw). Now send me my case; I will make my own plate. I don't want a brass plate anymore anyway.
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: InfiniteMan on Mon, 26 July 2021, 03:44:27
Is Sennin32 still posting updates on Discord?   
Why does he not posting updates in this GB thread anymore?
Did he just run away with our money?
Such an irresponsible person I’ve ever met in this community.
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: gordonderp on Mon, 26 July 2021, 04:42:37
Quote from: InfiniteMan on Mon, 26 July 2021, 03:44:27
Is Sennin32 still posting updates on Discord?   
Why does he not posting updates in this GB thread anymore?
Did he just run away with our money?
Such an irresponsible person I’ve ever met in this community.

Yes he is but the updates are pretty sparring.

Basically the brass plates and weights are done and have been shipped to him a week or two ago but he hasn't responded since then
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: InfiniteMan on Mon, 26 July 2021, 12:19:23
Quote from: gordonderp on Mon, 26 July 2021, 04:42:37
Quote from: InfiniteMan on Mon, 26 July 2021, 03:44:27
Is Sennin32 still posting updates on Discord?   
Why does he not posting updates in this GB thread anymore?
Did he just run away with our money?
Such an irresponsible person I’ve ever met in this community.

Yes he is but the updates are pretty sparring.

Basically the brass plates and weights are done and have been shipped to him a week or two ago but he hasn't responded since then

Could you please share the plate file since the Discord link is invalid.   
Seems everything is done by now right?
It's ridiculous that he has been dealing with the plates over a year if he was really doing it.
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: gordonderp on Mon, 26 July 2021, 20:53:09
Quote from: InfiniteMan on Mon, 26 July 2021, 12:19:23
Quote from: gordonderp on Mon, 26 July 2021, 04:42:37
Quote from: InfiniteMan on Mon, 26 July 2021, 03:44:27
Is Sennin32 still posting updates on Discord?   
Why does he not posting updates in this GB thread anymore?
Did he just run away with our money?
Such an irresponsible person I’ve ever met in this community.

Yes he is but the updates are pretty sparring.

Basically the brass plates and weights are done and have been shipped to him a week or two ago but he hasn't responded since then

Could you please share the plate file since the Discord link is invalid.   
Seems everything is done by now right?
It's ridiculous that he has been dealing with the plates over a year if he was really doing it.

I'm assuming you mean photos of the plate?

Here are some of the photos he sent, essentially there was an issue with the brass coating with the previous batch having a lot of scratches.

Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: obtuse on Sun, 12 September 2021, 04:25:21
Anybody got a working invite link to the discord, seems the older one is invalid. If the discord is even around anymore.

Really wish I canceled this a long time ago, when there was still time left to do it on paypal.

Quote from: sennin32 on Sun, 24 February 2019, 02:10:53
Will we run away with your money?
Maybe A_A

I mean...
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: thoughtworth123 on Sun, 12 September 2021, 15:03:30
Quote from: obtuse on Sun, 12 September 2021, 04:25:21
Anybody got a working invite link to the discord, seems the older one is invalid. If the discord is even around anymore.

Really wish I canceled this a long time ago, when there was still time left to do it on paypal.

Quote from: sennin32 on Sun, 24 February 2019, 02:10:53
Will we run away with your money?
Maybe A_A

I mean...



I tried searching for Doyu Studio and saw this discord link:
https://discord.gg/7TJqKqEh

Seems like there's an update late Aug from Sennin32. You can try it out.
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: InfiniteMan on Thu, 30 September 2021, 09:59:39
Again the discord link is invalid...
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: obtuse on Mon, 18 October 2021, 08:35:40
Discord link, shouldn't expire: https://discord.gg/7bKuCarcFc

Anyway, no progress, still.
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: Evasive on Mon, 18 October 2021, 14:33:53
Is this another group buy horror story?
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: heavyheaded on Thu, 24 March 2022, 08:09:41
Years after giving up on this one, just got an address confirmation email for shipping.
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: heavyheaded on Mon, 20 June 2022, 10:45:46
Quote from: heavyheaded on Thu, 24 March 2022, 08:09:41
Years after giving up on this one, just got an address confirmation email for shipping.

And now I have tracking info!
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: Sirenslee on Sun, 18 December 2022, 19:15:57
Didn't get my keyboard yet
The most ridiculous thing is I join the group in Taiwan, and the auther is in Taiwan too.
And I haven't got any information yet. The auther just always hiding.
Maybe we should sue him right?
Title: Re: [GB] Doyu Studio Chiwi60 kit R2 - a 60% kit [DLC Stainless Steel][ED Aluminum]
Post by: obtuse on Sat, 29 April 2023, 03:43:25
It's april 29 2023 and still no keyboard - LOL. And still not answering e-mails. Do we really have to go on discord to bug them all the time? My guess there's not really any answers in there either.

Why even send out e-mails in march 2022 asking people to confirm their addresses if you're not sending anything out anyway?

"Sorry for long wait, good news that we are going to send out your Chiwi 60 order soon." - right.