[GB] M65-A | Made with RAMA.WORKS (Complete)

[kustom3]

MOUSEPAD DESIGN DONE.

The white will be grey, just like the Cherry Mousepads using this CMYK code:(10,7,8,0)

Show Image

Triggering some 20 year-old Lego nostalgia with those graphics :>

If anybody wonders, the grey should be close from the center part of this picture:

[Auxo]

Damn shoulda went in on that mousepad, would perfectly present the kb on any desk

[robbles]

I regret not getting in on this gb more and more everyday. Hoping I can snag one of the extra mouse pads. What are the dimensions, jchan?

[aggroxcraig]

MOUSEPAD DESIGN DONE.

The white will be grey, just like the Cherry Mousepads using this CMYK code:(10,7,8,0)

Show Image

10/10 so happy that I got this pad.

[childofthehorn]

I'm kinda regretting not getting a mousepad, even though I only use a trackball....

Sent from my Pixel XL using Tapatalk

[MythicalWagyu]

I knew the mousepad would be worth getting

MOUSEPAD DESIGN DONE.

The white will be grey, just like the Cherry Mousepads using this CMYK code:(10,7,8,0)

Show Image

[Potatoes]

So we get to choose, right?

[itskuroi]

Probably going to look to transfer/refund my order, jchan's email queue is probably enormous so I'm going to help expedite this a bit! Tried my best to enjoy 68key layout, but after trying a TADA68, I just can't get used to the arrow location being so close.

Includes:

Hydro Blue
Nylon Base
Brass Plate
PCB

Total of $314.

Not sure if I can transfer a hydro blue one though. I hope so though!

[kmba]

So what is everyone's plans for their setup?  Switches?  Caps?

I got silver/nylon base.  Building green gatestotles, and tossing on XDA milestone while I hold out for gmk nautilus.  Bought milestone for a 60% board that I sold so this should work well and look pretty nice.

[nathanrosspowell]

So what is everyone's plans for their setup?  Switches?  Caps?

I got silver/nylon base.  Building green gatestotles, and tossing on XDA milestone while I hold out for gmk nautilus.  Bought milestone for a 60% board that I sold so this should work well and look pretty nice.

M65-A in rose gold, 67g Gatestotles and 67g Linear Zealios for the "hold down" mod keys (control, alt, shift, fn, etc) and GMK 9009 (with pink accent keys). Got a M10-A in rose gold coming as well... just need to get that rose gold M6-A and three custom cables and I can fill that epic mousepad fully 

[Valaris]

So what is everyone's plans for their setup?  Switches?  Caps?

I got silver/nylon base.  Building green gatestotles, and tossing on XDA milestone while I hold out for gmk nautilus.  Bought milestone for a 60% board that I sold so this should work well and look pretty nice.

Space grey  with 65g zealios. I'm tossing some Danger Zone keycaps on there and have a braided coiled grey and blue cable . I called it "Project Maverick".

[aznreaper]

Probably going to look to transfer/refund my order, jchan's email queue is probably enormous so I'm going to help expedite this a bit! Tried my best to enjoy 68key layout, but after trying a TADA68, I just can't get used to the arrow location being so close.

Includes:

Hydro Blue
Nylon Base
Brass Plate
PCB

Total of $314.

Not sure if I can transfer a hydro blue one though. I hope so though!

I got the same thing minus the brass plate, wonder if I can swap you and snag your brass plate... Jchan plz?

[cynviloq]

Probably going to look to transfer/refund my order, jchan's email queue is probably enormous so I'm going to help expedite this a bit! Tried my best to enjoy 68key layout, but after trying a TADA68, I just can't get used to the arrow location being so close.

Includes:

Hydro Blue
Nylon Base
Brass Plate
PCB

Total of $314.

Not sure if I can transfer a hydro blue one though. I hope so though!

I got the same thing minus the brass plate, wonder if I can swap you and snag your brass plate... Jchan plz?

I would be interested in the Hydro blue without the brass plate... this seems to be a trio that will work out...

[beamingrobot]

If anyone wants to let a champagne or gold ish finish set go lemme know, more than happy to take over the order

[Atredl]

Probably going to look to transfer/refund my order, jchan's email queue is probably enormous so I'm going to help expedite this a bit! Tried my best to enjoy 68key layout, but after trying a TADA68, I just can't get used to the arrow location being so close.

Includes:

Hydro Blue
Nylon Base
Brass Plate
PCB

Total of $314.

Not sure if I can transfer a hydro blue one though. I hope so though!

I got the same thing minus the brass plate, wonder if I can swap you and snag your brass plate... Jchan plz?

Damn! You beat me too it. I've got the same setup and I've also been hoping to snag a brass plate. I hope he lets you switch, it'll mean there's hope for me yet.

[wangbwhz]

If anyone would like to transfer a Rose Gold aluminum set, i am glad to take the spot.

[KINGPIN]

Probably going to look to transfer/refund my order, jchan's email queue is probably enormous so I'm going to help expedite this a bit! Tried my best to enjoy 68key layout, but after trying a TADA68, I just can't get used to the arrow location being so close.

Includes:

Hydro Blue
Nylon Base
Brass Plate
PCB

Total of $314.

Not sure if I can transfer a hydro blue one though. I hope so though!

I got the same thing minus the brass plate, wonder if I can swap you and snag your brass plate... Jchan plz?

Damn! You beat me too it. I've got the same setup and I've also been hoping to snag a brass plate. I hope he lets you switch, it'll mean there's hope for me yet.

I got my kit with
Silver top
Hydro bottom
Brass plate
PCB

[Kavik]

So what is everyone's plans for their setup?  Switches?  Caps?

I got silver/nylon base.  Building green gatestotles, and tossing on XDA milestone while I hold out for gmk nautilus.  Bought milestone for a 60% board that I sold so this should work well and look pretty nice.

M65-A in rose gold, 67g Gatestotles and 67g Linear Zealios for the "hold down" mod keys (control, alt, shift, fn, etc) and GMK 9009 (with pink accent keys). Got a M10-A in rose gold coming as well... just need to get that rose gold M6-A and three custom cables and I can fill that epic mousepad fully 

-M65-A Space Grey
-Silver base
-Brass switch plate
-67g Zealios
-Planning on GMK Nautilus or SA 1965 for caps eventually. In the meantime, I'll probably stick some Tai-Hao PBT caps on it.

[Atredl]

Probably going to look to transfer/refund my order, jchan's email queue is probably enormous so I'm going to help expedite this a bit! Tried my best to enjoy 68key layout, but after trying a TADA68, I just can't get used to the arrow location being so close.

Includes:

Hydro Blue
Nylon Base
Brass Plate
PCB

Total of $314.

Not sure if I can transfer a hydro blue one though. I hope so though!

I got the same thing minus the brass plate, wonder if I can swap you and snag your brass plate... Jchan plz?

Damn! You beat me too it. I've got the same setup and I've also been hoping to snag a brass plate. I hope he lets you switch, it'll mean there's hope for me yet.

I got my kit with
Silver top
Hydro bottom
Brass plate
PCB

Yeah, unfortunately I missed the window to order a brass plate. I understand why though, as manufacturers don't like to make continuous modifications to the order placed with them. It's just simpler to deal with. Hopefully someone decides they don't want their brass plate so I can swap with them ^_^

[itskuroi]

Probably going to look to transfer/refund my order, jchan's email queue is probably enormous so I'm going to help expedite this a bit! Tried my best to enjoy 68key layout, but after trying a TADA68, I just can't get used to the arrow location being so close.

Includes:

Hydro Blue
Nylon Base
Brass Plate
PCB

Total of $314.

Not sure if I can transfer a hydro blue one though. I hope so though!

I got the same thing minus the brass plate, wonder if I can swap you and snag your brass plate... Jchan plz?

Gonna see whatever makes it easier for jchan tbh

[breusch91]

Probably going to look to transfer/refund my order, jchan's email queue is probably enormous so I'm going to help expedite this a bit! Tried my best to enjoy 68key layout, but after trying a TADA68, I just can't get used to the arrow location being so close.

Includes:

Hydro Blue
Nylon Base
Brass Plate
PCB

Total of $314.

Not sure if I can transfer a hydro blue one though. I hope so though!

I got the same thing minus the brass plate, wonder if I can swap you and snag your brass plate... Jchan plz?

Gonna see whatever makes it easier for jchan tbh

Shot you a pm


Sent from my iPhone using Tapatalk

[Zanduby]

Now that CNY is well over and everyone is back in the grind, have you been given a proper ETA from the MFG?

[jchan94]

Now that CNY is well over and everyone is back in the grind, have you been given a proper ETA from the MFG?

Payment was made a while ago and I'm waiting for confirmation of dates. But they said 50 days basically.
Ill get back with a firm date soon.

[Dominathan]

Now that CNY is well over and everyone is back in the grind, have you been given a proper ETA from the MFG?

Payment was made a while ago and I'm waiting for confirmation of dates. But they said 50 days basically.
Ill get back with a firm date soon.

To make all of them?!  Damn, that seems fast! 

[jchan94]

Now that CNY is well over and everyone is back in the grind, have you been given a proper ETA from the MFG?

Payment was made a while ago and I'm waiting for confirmation of dates. But they said 50 days basically.
Ill get back with a firm date soon.

To make all of them?!  Damn, that seems fast!

Correct! And we're working on finalizing the box, etc for everything now. Hype hype hype.

[itskuroi]

transferred

[cynviloq]

Alright! Just spoke with jchan about it and I'm going to just transfer entire order. Most PMs I received were about splitting everything up, and I'd rather not do that. So I'd like to just transfer my entire order, which consisted of:

Show Image

Brass plate was 38 extra, so add onto the 276 + 38 = $314!

Don't think I'm allowed to part it out though.

I'll take it if it's still available?

[jchan94]

Alright! Just spoke with jchan about it and I'm going to just transfer entire order. Most PMs I received were about splitting everything up, and I'd rather not do that. So I'd like to just transfer my entire order, which consisted of:

Show Image

Brass plate was 38 extra, so add onto the 276 + 38 = $314!

Don't think I'm allowed to part it out though.

I'll take it if it's still available?

Ask the transferrer to email me a confirm of the transfer.

Then after that, email me your address and PayPal id.

Jchan@keyclack.com

[quanghuy1200]

So what is everyone's plans for their setup?  Switches?  Caps?

I got silver/nylon base.  Building green gatestotles, and tossing on XDA milestone while I hold out for gmk nautilus.  Bought milestone for a 60% board that I sold so this should work well and look pretty nice.

M65 Rose gold with Old Cherry black switch and SA valentine i have or i will trade it for a gmk valentine KA2017 

[kacase]

So what is everyone's plans for their setup?  Switches?  Caps?

I got silver/nylon base.  Building green gatestotles, and tossing on XDA milestone while I hold out for gmk nautilus.  Bought milestone for a 60% board that I sold so this should work well and look pretty nice.

M65-A Black
Brass Plate
Invyr Panda Linear - Lubed and SIP Socketed
GMK Terminal
Green LEDs with SIP

[naut]

So what is everyone's plans for their setup?  Switches?  Caps?

I got silver/nylon base.  Building green gatestotles, and tossing on XDA milestone while I hold out for gmk nautilus.  Bought milestone for a 60% board that I sold so this should work well and look pretty nice.

Silver/Nylon base
Brass Switch Plate
65g Zeal switches, possibly lubed
Zeal stabs
Keycaps: Some arrangement of blanks

HYPE!


Sent from my iPhone using Tapatalk

[kustom3]

So what is everyone's plans for their setup?  Switches?  Caps?

I got silver/nylon base.  Building green gatestotles, and tossing on XDA milestone while I hold out for gmk nautilus.  Bought milestone for a 60% board that I sold so this should work well and look pretty nice.

M65-A Black
Brass Plate
Invyr Panda Linear - Lubed and SIP Socketed
GMK Terminal
Green LEDs with SIP

I'm kind of doing something similar: Black/Brass/Nylon + GMK Laser or a black PBT keyset.
Still undecided on the linear switches I'm going to use though.

[Tre3Cycl3S]

So what is everyone's plans for their setup?  Switches?  Caps?

I got silver/nylon base.  Building green gatestotles, and tossing on XDA milestone while I hold out for gmk nautilus.  Bought milestone for a 60% board that I sold so this should work well and look pretty nice.

Mine is Matte Black with nylon base, most likely will be building it with 78g Zealios and topping it up with Amazing Chocolatier. Still subject to change of course

[kmba]

So what is everyone's plans for their setup?  Switches?  Caps?

I got silver/nylon base.  Building green gatestotles, and tossing on XDA milestone while I hold out for gmk nautilus.  Bought milestone for a 60% board that I sold so this should work well and look pretty nice.

M65-A Black
Brass Plate
Invyr Panda Linear - Lubed and SIP Socketed
GMK Terminal
Green LEDs with SIP

Not too dissimilar from my black KBD75 build.. sipped, green LEds, sitting here with black pbt blanks waiting for terminal  

[Zanduby]

So what is everyone's plans for their setup?  Switches?  Caps?

I got silver/nylon base.  Building green gatestotles, and tossing on XDA milestone while I hold out for gmk nautilus.  Bought milestone for a 60% board that I sold so this should work well and look pretty nice.

Space Grey
Lubed and 62g spring swapped mx silents
GMK Honeywell
Matching my M4 with it as well.

[_cramil]

Champagne Top
Nylon Base
Brass Plate
Probably SIP sockets with orange or gold LEDs
Still deciding on switches MOD-H or Zealios 67g. Maybe linears
SA1965 Keys

WooHoo or hype or whatever you kids say these days LOL

[breusch91]

Space Grey Top

Nylon base + additional jet black aluminum base

Brass everything

No LEDs for now

Switches will be hotlites so I can swap but have Mod-M's for them, though if MOD-SH's drop soon I might try those

SA Carbon w/orange alphas


Sent from my iPhone using Tapatalk

[imprevade]

Champagne Top
Champagne Base
Brass Plate
Gateron Greens
Zeal Transparent Gold-Plated PCB Screw-in Stabilizers
Amazing Chocolatier

[breckstar]

Space Grey
Nylon Base
Not Brass Plate 
78g Zeals or 98g Gateron Greens
Probably Zeal65 PCB whenever it comes out
SA Hyperfuse

[pr0ximity]

Just got the last of what I need aside from switches which are stuck in the mail.

Silver top+nylon bottom
Brass plate
Gold stab wires on Cherry stabs
72g gold springs vintage Blacks + GPL 104 + polycarb switch film
OG Cherry dyesubs + purple ano OTD Esc
Jumbo coiled cable from MechCables

[kolashnikov]

QMK one will be Type-C when it comes around.

I just noticed that QMK apparently has support for ps2avrgb already. Is there any reason that won't work with this PCB?

https://github.com/qmk/qmk_firmware/tree/master/keyboards/ps2avrGB

[jchan94]

A few progress photos! Just wanted to let everyone know that they're producing. These are unpolished/finalized, but I want you to see the progress / process. Enjoy!

[Fullcream]

looking awesome! thanks for the progress pictures. 

[GreyAmbience]

Sweeeeeeet! Can't wait  
 
I'm doing one for my kid;
 
Rose Gold case
Nylon base
Brass Plate
65g zealios
Holtite sockets
Soft pink LEDs
DSA Hana
Hana Colonel artisan

Sent from my microwave oven using alternating current

[audax989]

Sweeeeeeet! Can't wait  
 
I'm doing one for my kid;
 
Rose Gold case
Nylon base
Brass Plate
65g zealios
Holtite sockets
Soft pink LEDs
DSA Hana
Hana Colonel artisan

Sent from my microwave oven using alternating current

Where'd you get your holtites man?

[GreyAmbience]

Sweeeeeeet! Can't wait  
 
I'm doing one for my kid;
 
Rose Gold case
Nylon base
Brass Plate
65g zealios
Holtite sockets
Soft pink LEDs
DSA Hana
Hana Colonel artisan

Sent from my microwave oven using alternating current

Where'd you get your holtites man?

I'm actually getting some from Zeal Pcs and some from a GB I can't find anymlre  
It was on geekhack and it's closed now.

Sent from my microwave oven using alternating current

[leoparder]

A few progress photos! Just wanted to let everyone know that they're producing. These are unpolished/finalized, but I want you to see the progress / process. Enjoy!

Show Image

Show Image

Show Image

They look great ! Thanks for sharing.

Shiny shiny, almost worth a special industrial "unfinished" edition.

:)

[Kavik]

A few progress photos! Just wanted to let everyone know that they're producing. These are unpolished/finalized, but I want you to see the progress / process. Enjoy!

Show Image

Show Image

Show Image

Looks absolutely awesome, sir! Very excited.

[_cramil]

Will the long leg SIP sockets currently on KeyClack work on this board?

[jchan94]

Will the long leg SIP sockets currently on KeyClack work on this board?

of course!