Author Topic: [GB] GMK 9009 R3 (Read 259321 times)

pngu · « **Reply #400 on:** Thu, 27 August 2020, 11:54:53 »

Quote from: bobgr8 on Thu, 27 August 2020, 11:42:57

https://imgur.com/a/p3NJpl5

Posting all my 8 warped bars

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

3ambutter · « **Reply #401 on:** Thu, 27 August 2020, 11:55:40 »

Quote from: bobgr8 on Thu, 27 August 2020, 11:42:57

https://imgur.com/a/p3NJpl5

Posting all my 8 warped bars

Thank you for your pictures. Anybody who believes this is par for the course and would be happy to receive this spacebar kit should speak up

hamilton · « **Reply #402 on:** Thu, 27 August 2020, 15:13:19 »

My 9009 R2 has the same amount of spacebar "warping" as my R3 set. I really think this is just something people are noticing now and it hasn't impacted my typing experience

nug · « **Reply #403 on:** Thu, 27 August 2020, 18:42:37 »

Quote from: bobgr8 on Thu, 27 August 2020, 11:42:57

https://imgur.com/a/p3NJpl5

Posting all my 8 warped bars

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Can you post photos of them flat on a hard surface without you pressing down on one side? Thanks

leexy · « **Reply #404 on:** Thu, 27 August 2020, 20:50:47 »

Quote from: nug on Thu, 27 August 2020, 18:42:37

Quote from: bobgr8 on Thu, 27 August 2020, 11:42:57
https://imgur.com/a/p3NJpl5

Posting all my 8 warped bars

Can you post photos of them flat on a hard surface without you pressing down on one side? Thanks

no way, that would not fit the narrative he's pushing

pr0ximity · « **Reply #405 on:** Thu, 27 August 2020, 21:51:19 »

Quote from: pngu on Thu, 27 August 2020, 11:54:53

Show Image

Show Image

Show Image

This is an outrage

Rayndalf · « **Reply #406 on:** Thu, 27 August 2020, 22:44:10 »

Quote from: pr0ximity on Thu, 27 August 2020, 21:51:19

Quote from: pngu on Thu, 27 August 2020, 11:54:53

Show Image

Show Image

Show Image

This is an outrage

I know, look how that cup bent that space bar... that's just too much.
(I have vintage boards with perfectly straight 10u and 8u bars, but the 7u tooling seems like it's had problems for a while)

bobgr8 · « **Reply #407 on:** Thu, 27 August 2020, 22:46:41 »

Quote from: nug on Thu, 27 August 2020, 18:42:37

Quote from: bobgr8 on Thu, 27 August 2020, 11:42:57
https://imgur.com/a/p3NJpl5

Posting all my 8 warped bars

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Can you post photos of them flat on a hard surface without you pressing down on one side? Thanks

Here is the 6.25u I have mounted right now

Quote from: leexy on Thu, 27 August 2020, 20:50:47

Quote from: nug on Thu, 27 August 2020, 18:42:37
Quote from: bobgr8 on Thu, 27 August 2020, 11:42:57
https://imgur.com/a/p3NJpl5

Posting all my 8 warped bars

Can you post photos of them flat on a hard surface without you pressing down on one side? Thanks

no way, that would not fit the narrative he's pushing

Google narrative vs facts. No wonder there's fake news in the world! Meanwhile check out Cafe's bars: https://geekhack.org/index.php?topic=102580.msg2934365#msg2934365

First Love's bars: https://geekhack.org/index.php?topic=102261.msg2926147#msg2926147

In GMK_Delta

I don't see any comments on these threads for "pUshinG a NArrAtIVe", go comment there also na.

bobgr8 · « **Reply #408 on:** Thu, 27 August 2020, 23:08:55 »

Quote from: 3ambutter on Thu, 27 August 2020, 11:55:40

Quote from: bobgr8 on Thu, 27 August 2020, 11:42:57
https://imgur.com/a/p3NJpl5

Posting all my 8 warped bars

Thank you for your pictures. Anybody who believes this is par for the course and would be happy to receive this spacebar kit should speak up

And replace your bars with mine!

olsen34 · « **Reply #409 on:** Thu, 27 August 2020, 23:38:51 »

Quote from: leexy on Thu, 27 August 2020, 20:50:47

Quote from: nug on Thu, 27 August 2020, 18:42:37
Quote from: bobgr8 on Thu, 27 August 2020, 11:42:57
https://imgur.com/a/p3NJpl5

Posting all my 8 warped bars

Can you post photos of them flat on a hard surface without you pressing down on one side? Thanks

no way, that would not fit the narrative he's pushing

Wow, funniest comment I've seen this week

)

ossetepo · « **Reply #410 on:** Fri, 28 August 2020, 10:38:35 »

One good thing about this spacebar temper tantrum, it has motivated me to finally figure out how to ignore accounts.

HungerMechanic · « **Reply #411 on:** Mon, 07 September 2020, 09:10:18 »

I guess we should be thankful it was just warped spacebars. Here's someone's recent GMK First Love:

Ensaum · « **Reply #412 on:** Mon, 07 September 2020, 09:56:55 »

Quote from: HungerMechanic on Mon, 07 September 2020, 09:10:18

I guess we should be thankful it was just warped spacebars. Here's someone's recent GMK First Love:

Show Image

Don't show this to the GMK apologists. It might give them an aneurysm. But hey, everything's fine and this is totally normal and "functional"

/s

of_sam · « **Reply #413 on:** Mon, 07 September 2020, 21:12:13 »

Quote from: Ensaum on Mon, 07 September 2020, 09:56:55

Quote from: HungerMechanic on Mon, 07 September 2020, 09:10:18
I guess we should be thankful it was just warped spacebars. Here's someone's recent GMK First Love:

Show Image

Don't show this to the GMK apologists. It might give them an aneurysm. But hey, everything's fine and this is totally normal and "functional"

/s

You should probably do more research into that situation

bobgr8 · « **Reply #414 on:** Tue, 08 September 2020, 00:05:15 »

Quote from: Ensaum on Mon, 07 September 2020, 09:56:55

Quote from: HungerMechanic on Mon, 07 September 2020, 09:10:18
I guess we should be thankful it was just warped spacebars. Here's someone's recent GMK First Love:

Show Image

Don't show this to the GMK apologists. It might give them an aneurysm. But hey, everything's fine and this is totally normal and "functional"

/s

Choose your vendors carefully. Here is the vendors's comment which aren't confidence inspiring, certainly not a passionate one.

And some of the replies of GMK fanbois are hilarious! "GMK always has been ****ty so it must remain ****ty. GMK has warped spacebars before so therefore they must continue." Not to mention the abysmal communication from them. Again not blaming the vendors for GMK's QC, but expected some support from the vendors.

soer9459 · « **Reply #415 on:** Sun, 13 September 2020, 09:13:35 »

Does anyone know if there will be extras for this set? I don't mind a little warp or uneven legends

lys.nordique · « **Reply #416 on:** Sun, 13 September 2020, 10:43:18 »

Quote from: soer9459 on Sun, 13 September 2020, 09:13:35

Does anyone know if there will be extras for this set? I don't mind a little warp or uneven legends

They were available on july 7. :/

soer9459 · « **Reply #417 on:** Sun, 13 September 2020, 11:01:48 »

Quote from: scatology on Sun, 13 September 2020, 10:43:18

Quote from: soer9459 on Sun, 13 September 2020, 09:13:35
Does anyone know if there will be extras for this set? I don't mind a little warp or uneven legends

They were available on july 7. :/

Damn, how the hell did I miss that ..... Anyway, thanks

GarrettSucks · « **Reply #418 on:** Fri, 25 September 2020, 12:24:33 »

ACCEPTING WARPED SPACEBAR REPLACEMENT PHOTOS TO SEND TO GMK

If you have spacebars from the GMK 9009 R3 groupbuy / extras that have excessive warping, making the spacebars unusable, you may submit this form for GMK to review to see if you are eligible for replacements. Submitting does not guarantee all or any of your spacebars will be replaced. GMK will judge each submission and determine which complaints are justified for a replacement.

If you have submitted a support ticket to us with photos, please resubmit them through this form. GMK needs the data submitted in a certain format. Also please make sure your previous photos follow the guidelines in this form.

This form is only for customers who purchased directly from the storefronts listed below. If you purchased this set on the aftermarket or from any other storefront, you are not eligible for replacement because there is no way for us to fully verify the order information.

We (Dixie Mech, MKB.eu, Daily Clack, and iLumKB) will not be making the decision.

This form will be open for two weeks to allow everyone time to take their photos and submit the form. After GMK reviews all the submissions, we will notify each customer whether you were approved or denied for replacements. GMK will then produce and ship the vendors the replacements and we will work on sending each approved order their replacements.

Thank you everyone for your patience on this issue.

THIS FORM IS ACCEPTING RESPONSES UNTIL 11:59PM CENTRAL TIME, OCTOBER 11TH, 2020.

VIEW FORM

Domantas · « **Reply #419 on:** Sat, 26 September 2020, 06:36:57 »

Quote from: GarrettSucks on Fri, 25 September 2020, 12:24:33

ACCEPTING WARPED SPACEBAR REPLACEMENT PHOTOS TO SEND TO GMK

If you have spacebars from the GMK 9009 R3 groupbuy / extras that have excessive warping, making the spacebars unusable, you may submit this form for GMK to review to see if you are eligible for replacements. Submitting does not guarantee all or any of your spacebars will be replaced. GMK will judge each submission and determine which complaints are justified for a replacement.

If you have submitted a support ticket to us with photos, please resubmit them through this form. GMK needs the data submitted in a certain format. Also please make sure your previous photos follow the guidelines in this form.

This form is only for customers who purchased directly from the storefronts listed below. If you purchased this set on the aftermarket or from any other storefront, you are not eligible for replacement because there is no way for us to fully verify the order information.

We (Dixie Mech, MKB.eu, Daily Clack, and iLumKB) will not be making the decision.

This form will be open for two weeks to allow everyone time to take their photos and submit the form. After GMK reviews all the submissions, we will notify each customer whether you were approved or denied for replacements. GMK will then produce and ship the vendors the replacements and we will work on sending each approved order their replacements.

Thank you everyone for your patience on this issue.

THIS FORM IS ACCEPTING RESPONSES UNTIL 11:59PM CENTRAL TIME, OCTOBER 11TH, 2020.

VIEW FORM

Hi, Dixie, nice, but what about cafe and olivia++ spacebars? Of course you didn't run those, but maybe heard something from GMK, because they all three seems from same "batch"

kolashnikov · « **Reply #420 on:** Sat, 26 September 2020, 09:33:27 »

Filled out the form for all my 7u bars and an off-center 6u. They are definitely more warped than a 7u space from GMK carbon R1 but we will see if GMK thinks they are off-spec.

janglad · « **Reply #421 on:** Sun, 27 September 2020, 04:03:14 »

Quote from: kolashnikov on Sat, 26 September 2020, 09:33:27

Filled out the form for all my 7u bars and an off-center 6u. They are definitely more warped than a 7u space from GMK carbon R1 but we will see if GMK thinks they are off-spec.

(Attachment Link)

Just to make sure: you didn't submit that pic in the form right

Cause it breaks quite a few rules of what GMK needs haha (pressing on the spacebar, multiple bars in one image, not labelled).

PotatoTM · « **Reply #422 on:** Mon, 28 September 2020, 02:56:49 »

I won't be able to check my set until around mid-December... does that mean il just never be able to get replacements if they do end up being warped?

kolashnikov · « **Reply #423 on:** Mon, 28 September 2020, 04:14:46 »

Quote from: janglad on Sun, 27 September 2020, 04:03:14

Quote from: kolashnikov on Sat, 26 September 2020, 09:33:27
Filled out the form for all my 7u bars and an off-center 6u. They are definitely more warped than a 7u space from GMK carbon R1 but we will see if GMK thinks they are off-spec.

(Attachment Link)

Just to make sure: you didn't submit that pic in the form right Cause it breaks quite a few rules of what GMK needs haha (pressing on the spacebar, multiple bars in one image, not labelled).

Nope, that pic was special just for us

. It seems like GMK expects some amount of warp that is tolerable, so I was curious how 9009 R3 compared to older sets.

DukeEsquire · « **Reply #424 on:** Mon, 28 September 2020, 10:44:50 »

Quote from: PotatoTM on Mon, 28 September 2020, 02:56:49

I won't be able to check my set until around mid-December... does that mean il just never be able to get replacements if they do end up being warped?

Why mid-December?

And, yes.

haydoselefantes · « **Reply #425 on:** Mon, 28 September 2020, 14:07:32 »

Trying to decide if I should open my sealed set to check the space bars for warping.

This makes me less likely to buy GMK sets. Previously, if you were privileged to have cash before the drop, you could buy GMK sets knowing that if they didn't turn out as expected, you could resell it without losing much money. This injects uncertainty and reduces resale value, since a secondary buyer can't request replacements.

PotatoTM · « **Reply #426 on:** Wed, 30 September 2020, 03:37:24 »

Quote from: DukeEsquire on Mon, 28 September 2020, 10:44:50

Quote from: PotatoTM on Mon, 28 September 2020, 02:56:49
I won't be able to check my set until around mid-December... does that mean il just never be able to get replacements if they do end up being warped?

Why mid-December?

And, yes.

I've been moving around so I didn't want to ship it to me and have to deal with having it ship to an old address... so I had it shipped to my brother, we'll only see each other around the holidays and he'll bring the keyset with him so I won't be able to get the keyset until then. He's not familiar with keyboard stuff and I prefer not asking him to QC things for me as he's already doing me a huge favor (feel like this should be on GMK or the vendors), but I guess I have no choice if I don't want to risk having to use warped spacebars (if they're even usable?).

ZyBeR · « **Reply #427 on:** Thu, 01 October 2020, 01:38:51 »

Warped Spacebars is one issue, how about the rest of them? "/?" where is ? is super thin for example?

ideus · « **Reply #428 on:** Thu, 01 October 2020, 09:29:08 »

Quote from: ZyBeR on Thu, 01 October 2020, 01:38:51

Warped Spacebars is one issue, how about the rest of them? "/?" where is ? is super thin for example?

"That's normal" - GMK.

)

miaiji · « **Reply #429 on:** Sun, 29 November 2020, 05:48:42 »

Dharma is a very good design. I like it very much. When can I join the GB？

bobgr8 · « **Reply #430 on:** Sat, 30 January 2021, 22:20:37 »

although it's fruitless to expect any replacements from either dixie or GMK, but here goes nothing.

Is there any update?

GarrettSucks · « **Reply #431 on:** Mon, 05 April 2021, 14:01:16 »

We received the replacement spacebars from GMK with the GMK Nautilus shipment. Thank you for your patience as we finally have gotten around to getting this resolved. GMK sent us all the spacebars, instead of shipping to each vendor separately, so we will have to ship out the bars to each vendor.

We have sent out $0 invoices to everyone who submitted. This is an opportunity for you to change your address if it has changed since your 9009 order. We will ship out the replacements under these order numbers. Please check your emails. You must push this order through as if it were a regular order. So please do not just ignore the email when you see it.
THIS IS ONLY FOR OMNITYPE ORDERS. We do not dictate how the other regions will handle their replacements.

Only the 6u, 6.25u and 7u spacebars were replaced. Not the shorter ones or any other keys.

HungerMechanic · « **Reply #432 on:** Mon, 05 April 2021, 19:04:51 »

Thanks! I can confirm that GMK / Omnitype are sending replacements. Mine are on the way.

HaX · « **Reply #433 on:** Fri, 23 April 2021, 14:49:11 »

When is R4?

soeren · « **Reply #434 on:** Wed, 29 September 2021, 12:50:59 »

Quote from: HaX on Fri, 23 April 2021, 14:49:11

When is R4?

I am also intersted in R4, if it ever happens.

vladimir108 · « **Reply #435 on:** Wed, 29 September 2021, 12:57:17 »

Quote from: soeren on Wed, 29 September 2021, 12:50:59

Quote from: HaX on Fri, 23 April 2021, 14:49:11
When is R4?

I am also intersted in R4, if it ever happens.

Same.

ideus · « **Reply #436 on:** Thu, 30 September 2021, 15:49:20 »

When I saw this poping-up I thought that the R4 was finally coming, but not yet...

directheatedtriode · « **Reply #437 on:** Sun, 17 October 2021, 14:23:51 »

+1 also interested in R4, hopefully with the new trend of Alice bars and extra B in base

f1shbutts · « **Reply #438 on:** Mon, 07 February 2022, 16:51:08 »

+1 for the R4 interest

Chenson · « **Reply #439 on:** Mon, 07 February 2022, 19:06:58 »

R4 please

nathanoffosu · « **Reply #440 on:** Wed, 16 February 2022, 03:50:34 »

r4 +1

derpter · « **Reply #441 on:** Sat, 19 February 2022, 12:09:59 »

Yes R4 please, I need some of the other kits lol

befbef · « **Reply #442 on:** Mon, 21 February 2022, 05:11:49 »

Who needs R4 with this f*** up mods while there's: https://geekhack.org/index.php?topic=116099.0

ultracomputer · « **Reply #443 on:** Sat, 30 April 2022, 22:43:34 »

Please make a R4!!!!

BasedCoper · « **Reply #444 on:** Sun, 01 May 2022, 01:23:39 »

Quote from: ultracomputer on Sat, 30 April 2022, 22:43:34

Please make a R4!!!!

Yes.

stomaha · « **Reply #445 on:** Sun, 01 May 2022, 08:00:55 »

Correct.

gfreeman11898 · « **Reply #446 on:** Sun, 01 May 2022, 08:18:48 »

OG icon mods for R4.

LAWSON · « **Reply #447 on:** Sun, 01 May 2022, 10:52:46 »

+1, in for an R4 (need the obscure/ortho kit)

Pylon · « **Reply #448 on:** Sun, 01 May 2022, 13:06:38 »

Much like Dolch no one really owns the 9009 color scheme (as it's based off the Cherry G80-9009), so in theory anyone can run it.

Seunghyun Lee · « **Reply #449 on:** Tue, 10 May 2022, 11:06:48 »

R4 please!!!

News:

Author Topic: [GB] GMK 9009 R3 (Read 259321 times)