Author Topic: Price Check- What's it Worth? (Read 2375295 times)

scud80 · « **Reply #8100 on:** Tue, 27 March 2018, 13:20:32 »

price check on this fugu:
https://i.imgur.com/oe2Rt6y.jpg
https://i.imgur.com/nA3eoFW.jpg

was offered it at 120 and that's a bit too much for me to casually say yes since i'm just getting started collecting.

LightningXI · « **Reply #8101 on:** Tue, 27 March 2018, 19:33:31 »

Quote from: scud80 on Tue, 27 March 2018, 13:20:32

price check on this fugu:
https://i.imgur.com/oe2Rt6y.jpg
https://i.imgur.com/nA3eoFW.jpg

was offered it at 120 and that's a bit too much for me to casually say yes since i'm just getting started collecting.

Price is not far off from market value.

scud80 · « **Reply #8102 on:** Wed, 28 March 2018, 00:24:13 »

thanks!

TalkingTree · « **Reply #8103 on:** Wed, 28 March 2018, 03:19:04 »

How much for a GMK Skeletor in pristine condition? Thanks.

LightningXI · « **Reply #8104 on:** Wed, 28 March 2018, 08:56:53 »

Quote from: TalkingTree on Wed, 28 March 2018, 03:19:04

How much for a GMK Skeletor in pristine condition? Thanks.

180 tops. But I've seen them sell for lower as well.

Sent from my mobile using Tapatalk

nearbird · « **Reply #8105 on:** Wed, 28 March 2018, 09:03:48 »

How much would a used ESA-3000-HASRO sell for?

Comment · « **Reply #8106 on:** Wed, 28 March 2018, 12:46:45 »

I have a turquoise GasMask from a few years back. Anyone know what it would be worth?

LightningXI · « **Reply #8107 on:** Wed, 28 March 2018, 13:20:32 »

Quote from: nearbird on Wed, 28 March 2018, 09:03:48

How much would a used ESA-3000-HASRO sell for?

I already informed this user, but it highly depends on how used and the condition of each component. The HASRO is a collectible, and the caps are sought after, but the highest price buyers often want BNIB.

Sent from my mobile using Tapatalk

LightningXI · « **Reply #8108 on:** Wed, 28 March 2018, 13:21:41 »

Quote from: Comment on Wed, 28 March 2018, 12:46:45

I have a turquoise GasMask from a few years back. Anyone know what it would be worth?

Gas Masks have been hanging around the 15-30 range nowadays.

Sent from my mobile using Tapatalk

TalkingTree · « **Reply #8109 on:** Wed, 28 March 2018, 13:48:41 »

Quote from: LightningXI on Wed, 28 March 2018, 08:56:53

Quote from: TalkingTree on Wed, 28 March 2018, 03:19:04
How much for a GMK Skeletor in pristine condition? Thanks.
180 tops. But I've seen them sell for lower as well.

Thank you.

Comment · « **Reply #8110 on:** Fri, 30 March 2018, 10:32:12 »

Quote from: LightningXI on Wed, 28 March 2018, 13:21:41

Quote from: Comment on Wed, 28 March 2018, 12:46:45
I have a turquoise GasMask from a few years back. Anyone know what it would be worth?
Gas Masks have been hanging around the 15-30 range nowadays.

Sent from my mobile using Tapatalk

Thanks!

brentaarnold · « **Reply #8111 on:** Mon, 02 April 2018, 00:13:57 »

Topre Realforce 87u 55g (white) - lightly used with a custom Pexon PC cable
Vortex Aluminum TKL Case - unused
Like New Bolt-Modded 1391401 Model M

Puddsy · « **Reply #8112 on:** Mon, 02 April 2018, 12:09:27 »

Quote from: brentaarnold on Mon, 02 April 2018, 00:13:57

Topre Realforce 87u 55g (white) - lightly used with a custom Pexon PC cable
Vortex Aluminum TKL Case - unused
Like New Bolt-Modded 1391401 Model M

220ish

whatever you paid for it + shipping

not sure what model ms go for right now

Blaise170 · « **Reply #8113 on:** Tue, 03 April 2018, 11:47:08 »

What kind of price would be reasonable for a translucent yellow KRAP skull? Don't have a picture at the moment, but I'm more curious than anything as I don't plan on selling it right now.

LightningXI · « **Reply #8114 on:** Tue, 03 April 2018, 19:41:19 »

Quote from: Blaise170 on Tue, 03 April 2018, 11:47:08

What kind of price would be reasonable for a translucent yellow KRAP skull? Don't have a picture at the moment, but I'm more curious than anything as I don't plan on selling it right now.

Retail or less.

Mcnos · « **Reply #8115 on:** Tue, 03 April 2018, 20:06:04 »

How about a Ash Slurp Artisan?

LightningXI · « **Reply #8116 on:** Tue, 03 April 2018, 20:08:25 »

Quote from: Mcnos on Tue, 03 April 2018, 20:06:04

How about a Ash Slurp Artisan?

This one? I think Ash was v1.5 actually. I think it sold for $30, so I'd say about that much. $35 shipped most likely.

xtreg · « **Reply #8117 on:** Fri, 06 April 2018, 23:58:36 »

What would be a reasonable price for a pristine condition Siig Minitouch with SMK second generation Monterey blue switches? Thanks for your information.

binnie · « **Reply #8118 on:** Sat, 07 April 2018, 00:33:14 »

I'm wondering about the values on Shishis. Do prices between colorways vary a ton? I'm just getting into artisans and I really really REALLY like the shishi sculpt lol. I have won one of the JAK raffles so far so I doubt I would be able to trade for anything yet but I so want to get a shishi at some point in the distant future.

LightningXI · « **Reply #8119 on:** Sat, 07 April 2018, 02:59:45 »

Quote from: binnie on Sat, 07 April 2018, 00:33:14

I'm wondering about the values on Shishis. Do prices between colorways vary a ton? I'm just getting into artisans and I really really REALLY like the shishi sculpt lol. I have won one of the JAK raffles so far so I doubt I would be able to trade for anything yet but I so want to get a shishi at some point in the distant future.

Prices between colorways will definitely vary significantly. While retail starts around $70; singleshot colorways in the market may be around $120, and some slush/doubleshot colorways may be up to $200 and higher. For the most desired colorways (see Hydroscopic, or rare ones such as Iron Guardian), their values can go above $300-350, all the way up to, perhaps $450-500.

Oxtar_ · « **Reply #8120 on:** Sat, 07 April 2018, 16:11:33 »

Hello and very first sorry about these horrible pictures because my phone lens is broken(I'll take better ones when get real camera)

And english isn't my languauge

)

How can i be sure if this is real Triumph Adler G81-3000 and of course what's it worth?

It has Cherry logos inside and those black Cherry switches and TA logo back on it.

It is in mint condition but has big problem. Someone have murdered the wire. Is there any solution to fix it again.

Oxtar_ · « **Reply #8121 on:** Sat, 07 April 2018, 16:22:18 »

double sry

fohat.digs · « **Reply #8122 on:** Sat, 07 April 2018, 17:43:51 »

That is a very nice keyboard. You have an opportunity to buy an inexpensive breakout board, mount it inside the case, and have a programmable USB keyboard for very little money.

hansichen · « **Reply #8123 on:** Sat, 07 April 2018, 18:02:25 »

Quote from: Oxtar_ on Sat, 07 April 2018, 16:11:33

Hello and very first sorry about these horrible pictures because my phone lens is broken(I'll take better ones when get real camera) And english isn't my languauge )

How can i be sure if this is real Triumph Adler G81-3000 and of course what's it worth?

It has Cherry logos inside and those black Cherry switches and TA logo back on it.

Show Image

Show Image

Show Image

Show Image

Show Image

It is in mint condition but has big problem. Someone have murdered the wire. Is there any solution to fix it again.

Max 400€ but it should be less when I look at the last offers/sales.

att1cus · « **Reply #8124 on:** Tue, 10 April 2018, 14:40:20 »

Looking for price check on original-run Calm Depths. Would like it to include the following sets for 96-key layout:

Base
Modifiers
Numpad
Tsangan/TASFOX

Thanks!

xtreg · « **Reply #8125 on:** Wed, 11 April 2018, 07:16:28 »

Quote from: xtreg on Fri, 06 April 2018, 23:58:36

What would be a reasonable price for a pristine condition Siig Minitouch with SMK second generation Monterey blue switches? Thanks for your information.

Bump. Really would like to find out because I have one I'd like to sell.

HPE1000 · « **Reply #8126 on:** Wed, 11 April 2018, 14:12:03 »

How much would 69 linear green alps switches be worth? Bought them forever ago and never did anything with them so I am prob just going to get rid of them.

romevi · « **Reply #8127 on:** Wed, 11 April 2018, 14:12:53 »

TGR Jane r1 Ti Gray.

Blaise170 · « **Reply #8128 on:** Wed, 11 April 2018, 14:58:39 »

Quote from: HPE1000 on Wed, 11 April 2018, 14:12:03

How much would 69 linear green alps switches be worth? Bought them forever ago and never did anything with them so I am prob just going to get rid of them.

Probably $30-40 if you can find a buyer.

Mr_BeastQuake · « **Reply #8129 on:** Wed, 11 April 2018, 19:31:23 »

Quote from: romevi on Wed, 11 April 2018, 14:12:53

TGR Jane r1 Ti Gray.

x2 eternal souls

LightningXI · « **Reply #8130 on:** Wed, 11 April 2018, 23:09:17 »

Quote from: romevi on Wed, 11 April 2018, 14:12:53

TGR Jane r1 Ti Gray.

My love

romevi · « **Reply #8131 on:** Thu, 12 April 2018, 00:59:48 »

Quote from: Mr_BeastQuake on Wed, 11 April 2018, 19:31:23

Quote from: romevi on Wed, 11 April 2018, 14:12:53
TGR Jane r1 Ti Gray.

x2 eternal souls

Quote from: LightningXI on Wed, 11 April 2018, 23:09:17

Quote from: romevi on Wed, 11 April 2018, 14:12:53
TGR Jane r1 Ti Gray.

My love

So nothing.

Oxtar_ · « **Reply #8132 on:** Fri, 13 April 2018, 09:13:36 »

Quote from: Oxtar_ on Sat, 07 April 2018, 16:11:33

Hello and very first sorry about these horrible pictures because my phone lens is broken(I'll take better ones when get real camera) And english isn't my languauge )

How can i be sure if this is real Triumph Adler G81-3000 and of course what's it worth?

It has Cherry logos inside and those black Cherry switches and TA logo back on it.

Show Image

Show Image

Show Image

Show Image

Show Image

It is in mint condition but has big problem. Someone have murdered the wire. Is there any solution to fix it again.

Fixed that wire problem now and writing actually this message with this keyboard and works perfectly :cool:

Still no better pics...

hansichen · « **Reply #8133 on:** Fri, 13 April 2018, 10:32:58 »

Quote from: Oxtar_ on Fri, 13 April 2018, 09:13:36

Quote from: Oxtar_ on Sat, 07 April 2018, 16:11:33
Hello and very first sorry about these horrible pictures because my phone lens is broken(I'll take better ones when get real camera) And english isn't my languauge )

How can i be sure if this is real Triumph Adler G81-3000 and of course what's it worth?

It has Cherry logos inside and those black Cherry switches and TA logo back on it.

Show Image

Show Image

Show Image

Show Image

Show Image

It is in mint condition but has big problem. Someone have murdered the wire. Is there any solution to fix it again.

Fixed that wire problem now and writing actually this message with this keyboard and works perfectly :cool:

Still no better pics...

People only buy it for case and caps and not to use it, it's still at maybe 300-350€.

hwood34 · « **Reply #8134 on:** Fri, 13 April 2018, 11:54:41 »

What the hell are yall selling OG KMACs for these days?

JBEzOrg · « **Reply #8135 on:** Fri, 13 April 2018, 16:04:56 »

Price check on some older Fugus:

Fallen Flamingo Toothy w/ pink tips
Bee and Barb- Cliffracer II
Prismatics- Beetings and Toy Green
Egg Hues- Grouse

E3E · « **Reply #8136 on:** Tue, 17 April 2018, 08:06:25 »

Quote from: HPE1000 on Wed, 11 April 2018, 14:12:03

How much would 69 linear green alps switches be worth? Bought them forever ago and never did anything with them so I am prob just going to get rid of them.

$65 - low

$75~ - high

They're worth around a dollar a piece these days if they're in good condition. Demand has increased quite a bit in the past three years.

goobus · « **Reply #8137 on:** Wed, 18 April 2018, 22:57:44 »

What’s an unused brand new LZ-GH kit worth? It’s been years since I got it in the first group buy and I haven’t had time to put it together.

LightningXI · « **Reply #8138 on:** Wed, 18 April 2018, 23:21:39 »

Quote from: goobus on Wed, 18 April 2018, 22:57:44

What’s an unused brand new LZ-GH kit worth? It’s been years since I got it in the first group buy and I haven’t had time to put it together.

Given that the LZ-GH v2 is literally up right now, I would assume similar to the kit price there.

goobus · « **Reply #8139 on:** Thu, 19 April 2018, 02:28:18 »

b-b-b-but it's the original!! XD

goobus · « **Reply #8140 on:** Thu, 19 April 2018, 02:30:53 »

What would this be worth?

Realforce 87u Anniversary Edition with Blue and Grey keycaps, modified with 55g domes and silenced sliders from a silenced 87u, in a Digilog case. However, 2 of the domes don't work (don't think I put it together correctly), and I stripped one of the hex screws on the digilog case so I can't open it to fix.

LightningXI · « **Reply #8141 on:** Thu, 19 April 2018, 05:51:28 »

Quote from: goobus on Thu, 19 April 2018, 02:30:53

What would this be worth?

Realforce 87u Anniversary Edition with Blue and Grey keycaps, modified with 55g domes and silenced sliders from a silenced 87u, in a Digilog case. However, 2 of the domes don't work (don't think I put it together correctly), and I stripped one of the hex screws on the digilog case so I can't open it to fix.

Well... For just the RF 87u, I'd say 350-400 shipped if CONUS.

But it's actually a disadvantage that it is nearly permanently stuck in the Digilog case given that there are folks working on custom Topre cases (see Norbaforce by norbauer, or XRF by xondat). I don't know how to value the case, but I would give it a deep discount for the inconvenience.

Sent from my mobile using Tapatalk

LightningXI · « **Reply #8142 on:** Thu, 19 April 2018, 05:52:16 »

Quote from: goobus on Thu, 19 April 2018, 02:28:18

b-b-b-but it's the original!! XD

Heh. You're not wrong, but why charge more? I'd rather sell it at cost, and make the next owner happy.

Sent from my mobile using Tapatalk

Wazazaby · « **Reply #8143 on:** Thu, 19 April 2018, 10:22:13 »

Price check on a LZ SQ + aditionnal plate and PCB?

absyrd · « **Reply #8144 on:** Sat, 21 April 2018, 05:41:18 »

PC on Booper! cosmonaut F2s?

LightningXI · « **Reply #8145 on:** Sat, 21 April 2018, 07:50:18 »

Quote from: absyrd on Sat, 21 April 2018, 05:41:18

PC on Booper! cosmonaut F2s?

Show Image

The market varies a lot on them, and they often are traded as well. I know of an F2 that sold for around 60, but frankly, there could be higher offers. I cannot pinpoint a price, as many dealings also occur privately as they move between owners.

Sent from my mobile using Tapatalk

LightningXI · « **Reply #8146 on:** Sat, 21 April 2018, 07:53:01 »

Quote from: Wazazaby on Thu, 19 April 2018, 10:22:13

Price check on a LZ SQ + aditionnal plate and PCB?

Last I saw one sell, it sold at 800.

Sent from my mobile using Tapatalk

absyrd · « **Reply #8147 on:** Sat, 21 April 2018, 10:13:27 »

Quote from: LightningXI on Sat, 21 April 2018, 07:50:18

Quote from: absyrd on Sat, 21 April 2018, 05:41:18
PC on Booper! cosmonaut F2s?

Show Image

The market varies a lot on them, and they often are traded as well. I know of an F2 that sold for around 60, but frankly, there could be higher offers. I cannot pinpoint a price, as many dealings also occur privately as they move between owners.

Sent from my mobile using Tapatalk

I'm completely out of the loop on artisans. These were donated to me to raise funds for charity.

joey · « **Reply #8148 on:** Sat, 21 April 2018, 10:15:34 »

Chuck them on the 'bay?

LightningXI · « **Reply #8149 on:** Sat, 21 April 2018, 10:49:47 »

Quote from: joey on Sat, 21 April 2018, 10:15:34

Chuck them on the 'bay?

Please no.

Sent from my mobile using Tapatalk

News:

Author Topic: Price Check- What's it Worth? (Read 2375295 times)