[GB] CF-LX: Carbon Fiber 60% Case [DONE]

[VentureG]

I think I'm just not the target demographic for this. Which is a shame because I bet they are going to look gorgeous.

It's definitely not for everyone. I think it's a good value for what it is: an extremely niche product, made accessible for a reasonable price. For people who are willing to spend upwards of 200 dollars for hammer or mkc cases, this one is actually cheaper. It's even price competitive with TEX aluminum cases even with the acrylic mid piece. This case will definitely be one of the most unique around  for a long time.

[hwood34]

I think I'm just not the target demographic for this. Which is a shame because I bet they are going to look gorgeous.

It's definitely not for everyone. I think it's a good value for what it is: an extremely niche product, made accessible for a reasonable price. For people who are willing to spend upwards of 200 dollars for hammer or mkc cases, this one is actually cheaper. It's even price competitive with TEX aluminum cases even with the acrylic mid piece. This case will definitely be one of the most unique around  for a long time.

Yeah, a niche product in a niche hobby does not a large demographic make

[Ngt]

[HannahPeach]

Is it too late to submit an order? Or am I just blind?

[primitiveType]

I think I'm just not the target demographic for this. Which is a shame because I bet they are going to look gorgeous.

It's definitely not for everyone. I think it's a good value for what it is: an extremely niche product, made accessible for a reasonable price. For people who are willing to spend upwards of 200 dollars for hammer or mkc cases, this one is actually cheaper. It's even price competitive with TEX aluminum cases even with the acrylic mid piece. This case will definitely be one of the most unique around  for a long time.

Yeah the price looks amazing. I almost pulled out my wallet, then I thought "Wait, do I need this?". Looking forward to photos from you guys

[Willyc277]

I grew up racing motocross and carbon fiber was the crème de la crème. I used to drool over cf exhausts. I knew I'd be in on this buy before I even finished reading the title.

[Ngt]

As the files have been finalized, is everything good to go? Have you placed the order already?

[VentureG]

Since this is getting so close to fruition, would any one have any recommendations for shielding a pcb from the case? I know ngt mentioned using a sheet of rubber but would just a sheet of neoprene stuck to the bottom half work?

[Steezus]

Since this is getting so close to fruition, would any one have any recommendations for shielding a pcb from the case? I know ngt mentioned using a sheet of rubber but would just a sheet of neoprene stuck to the bottom half work?

Neoprene should do just fine as long as it's not too thick. Basically anything that isn't conductive and has a little bit of cushion.

[Jersern]

Wait why do we need insulating material between the pcb and case??? Isn't carbon fibre non-conductive anyway?

[Ngt]

Wait why do we need insulating material between the pcb and case??? Isn't carbon fibre non-conductive anyway?

I'm not sure why it would be needed either or at least I don't remember why. As the case is empty in the middle for those who didn't take the middle piece, the PCB should not be in contact with the bottom of the case, should it?

[Joey Quinn]

Wait why do we need insulating material between the pcb and case??? Isn't carbon fibre non-conductive anyway?

I'm not sure why it would be needed either or at least I don't remember why. As the case is empty in the middle for those who didn't take the middle piece, the PCB should not be in contact with the bottom of the case, should it?

With a board that has an SMT controller using 3/8in spacers the usb ends up pretty close to the bottom plate but not enough to short.

[Ngt]

Wait why do we need insulating material between the pcb and case??? Isn't carbon fibre non-conductive anyway?

I'm not sure why it would be needed either or at least I don't remember why. As the case is empty in the middle for those who didn't take the middle piece, the PCB should not be in contact with the bottom of the case, should it?

With a board that has an SMT controller using 3/8in spacers the usb ends up pretty close to the bottom plate but not enough to short.

Ok thanks for the explanation.

[Jersern]

Obligatory any updates?

[hwood34]

Obligatory any updates?

machining place is taking their sweet time with responses

[Jersern]

Damn I hope the machine shop will get the timing right and have the plates ready when the Zealio switches begin shipping out! Can't wait to put together my 60%.

[MrRooks]

Is it too late to submit an order? Or am I just blind?

I second this, anyone know?

[Jersern]

Pretty sure orders are closed since hwood's already placed the order for the plates. We might have left overs or something, you could always try and ask.

[nathanrosspowell]

Not sure how I missed this. HHKB layout looking on point. Would like to step up if anyone backs out or if there are extras 

[hwood34]

Not sure how I missed this. HHKB layout looking on point. Would like to step up if anyone backs out or if there are extras 

Orders still open.

Up until this point, the company I'm currently going with has been pretty prompt in their responses, but for some reason getting this final quote seems to be taking absolutely forever.

[nathanrosspowell]

Not sure how I missed this. HHKB layout looking on point. Would like to step up if anyone backs out or if there are extras 

Orders still open.

Up until this point, the company I'm currently going with has been pretty prompt in their responses, but for some reason getting this final quote seems to be taking absolutely forever.

Ah, great. How does one put in an order then? There isn't a link in the OP.

[hwood34]

Not sure how I missed this. HHKB layout looking on point. Would like to step up if anyone backs out or if there are extras 

Orders still open.

Up until this point, the company I'm currently going with has been pretty prompt in their responses, but for some reason getting this final quote seems to be taking absolutely forever.

Ah, great. How does one put in an order then? There isn't a link in the OP.

PM'd

[Ngt]

Hello Hwood!


Did you get your quote back from the shop? I hope they will not take as long for the machining as they did for the quote!  )

[Jersern]

Any updates please Hwood?

[hwood34]

This shop is just being unprofessional at this point with the lack of updates. I have another in line that seems pretty happy to take on the project (and even recognized it was a keyboard)

[NOLAnuffsaid]

Is it still possible to join this group buy?

[Willyc277]

Thanks HWood!

[hwood34]

Submitted everything to a new place, now to wait again...


And I have some stuff to do tonight but I'll get you two sorted out with the orders

[NOLAnuffsaid]

Submitted everything to a new place, now to wait again...


And I have some stuff to do tonight but I'll get you two sorted out with the orders

Pm me with details

[lashiel]

Never built a keyboard, but signed up for the forums because I'm very interested. Can I still place an order?

[Ngt]

I wish this last manufacturer will be the good one! 

[Xonar]

I now have all the parts I need for this build. Just waiting on the case... Hopefully this shop will be much quicker with the quote than the last. In any case I'm sure the long wait will be worth it when it finally arrives! 

[Ngt]

I now have all the parts I need for this build. Just waiting on the case... Hopefully this shop will be much quicker with the quote than the last. In any case I'm sure the long wait will be worth it when it finally arrives! 

Yeah that's what I hope too! Please last shop, be fast to answer to sir Hwood! 

[mrgoldenzombie]

Looks dandy 

[vindaon]

Has the money been sent yet or are we still waiting to hear back from this new place? I was wondering if I could get my money back, kinda lost interest in 60% at this point.

Otherwise putting my set up for sale. Standard plate + Acrylic Mid, paid $127 total.

[hwood34]

Branching out my range of searching, just emailed around 10 new places both in Virginia and elsewhere. Many of these places specialize in smaller projects over industrial stuff, so I'm assuming these will work out much better. It's taking longer than anticipated by a long shot, but rest assured I will get these cases done.

[hwood34]

Has the money been sent yet or are we still waiting to hear back from this new place? I was wondering if I could get my money back, kinda lost interest in 60% at this point.

Otherwise putting my set up for sale. Standard plate + Acrylic Mid, paid $127 total.

pm'd

[vindaon]

Thanks hwood.

Good luck with this buy, I still think it's cool. Just more into the 75% layout now.

[hwood34]

Thanks hwood.

Good luck with this buy, I still think it's cool. Just more into the 75% layout now.

Yeah, I feel ya there. I really got this started because I was super into 60% then. Even though I kinda moved on from the layout, still really liked the idea and wanted to see it completed

[Willyc277]

Thanks hwood!

[hwood34]

Has the money been sent yet or are we still waiting to hear back from this new place? I was wondering if I could get my money back, kinda lost interest in 60% at this point.

Otherwise putting my set up for sale. Standard plate + Acrylic Mid, paid $127 total.

pm'd

Could I get a PM/refund as well? Paypal address is mxraca277@gmail.com. I asked 2 weeks ago and I thought you said you were going to let someone take over my order? Next step will be a claim through paypal.

PM'd

[hwood34]

Got quick responses from 3 places already

[lashiel]

Got quick responses from 3 places already

Awesome! That's pretty good news. I may have to actually start finding a PCB/switches/how to make a keyboard. 

[Ngt]

Got quick responses from 3 places already

Cool! What is the next step? Comparing their offer and picking the best one?

[hwood34]

Got quick responses from 3 places already

Cool! What is the next step? Comparing their offer and picking the best one?

Yup

[Ngt]

Got quick responses from 3 places already

Cool! What is the next step? Comparing their offer and picking the best one?

Yup

Cool. I hope this time is the good one! Looking forward to get one.

[Jersern]

My Zealios have arrived. Can confirmed very hyped.

[Ngt]

My Zealios have arrived. Can confirmed very hyped.

Yeah same thing for me here! So much hype as well! I hope Hwood will come back soon with a good news.

[hwood34]

Another update: still talking with 3 separate places, though I'm almost surely going with one already. They've been great with quick responses (usually within 10-20 minutes) and right now are testing something out for me. So expect an interesting update Monday, possibly updates from the other two places sooner.

[lashiel]

Another update: still talking with 3 separate places, though I'm almost surely going with one already. They've been great with quick responses (usually within 10-20 minutes) and right now are testing something out for me. So expect an interesting update Monday, possibly updates from the other two places sooner.

We eagerly await news. Also really appreciate you being so prompt about updating us.