How about adding a B to the 40's kit for combined 40/alice support?
Please add R5 alt grnoted. :)
Any chance for a windowed cherry-icon 1u? (In additionals kit)sure!
I’m in for 2002, additional and likely CMYK :D
ne chance for rgb kit ?i'm afraid that hiney will run rgbyk kit along with hineybeige, but we'll see.
It's pretty cool project so people have compat. I personally see no appeal of R5/R0 set compare the same that made for WoB. Most of OG doubleshots (1000HAU for example) as well as other recent beige runs (like Zhuyin) already have R5 compare to WoB which sold constantly as in stock with R4 bottom row.
2.25u enter in addition kit looks like a meme and since it's most expensive key in GMK, it ruins the purpuse of extensions. Less than 1% people that will be buying kit, will use it. Instead it's better to make separate kit to add compat for OG doubleshots for ISO/ANSI.
I disagree with removing R5 altogether. I personally have no OG set and didn’t buy zhuyin. But what I do have is multiple sets of R2 9009 that I’d love to have R5 for. Just my 2 cents that I’d happily pay for R5.It's pretty cool project so people have compat. I personally see no appeal of R5/R0 set compare the same that made for WoB. Most of OG doubleshots (1000HAU for example) as well as other recent beige runs (like Zhuyin) already have R5 compare to WoB which sold constantly as in stock with R4 bottom row.thanks for the feedback, i'll move my 2.25 enter to a separte kit. for R5 bottom row i'll consider removing it to lower the price. thanks!
2.25u enter in addition kit looks like a meme and since it's most expensive key in GMK, it ruins the purpuse of extensions. Less than 1% people that will be buying kit, will use it. Instead it's better to make separate kit to add compat for OG doubleshots for ISO/ANSI.
It's pretty cool project so people have compat. I personally see no appeal of R5/R0 set compare the same that made for WoB. Most of OG doubleshots (1000HAU for example) as well as other recent beige runs (like Zhuyin) already have R5 compare to WoB which sold constantly as in stock with R4 bottom row.
2.25u enter in addition kit looks like a meme and since it's most expensive key in GMK, it ruins the purpuse of extensions. Less than 1% people that will be buying kit, will use it. Instead it's better to make separate kit to add compat for OG doubleshots for ISO/ANSI.
ne chance for rgb kit ?i'm afraid that hiney will be running rgbyk kit along with hineybeige, but we'll see.
100% in for the CMYK kit. Will also get the R0/R5 kit but maybe consider having it only R0 since a lot of beige sets do already have R5.noted.
Also I'd like to see the traditional PrtSc/SysRq and Pause/Break keys with the front print on the R0 keys.
In either way.
This would be the perk of capturing r0 r5 data in the IC form.done, i've updated the form.
I’d buy the kit as is (incidentally, me)
I’d buy multiples
I’d buy r0 only and including r5 is a dealbreaker
The opposite of the above
Not interested
This will get you both the communities desires and help you get a better MOQ if there’s a buncha people interested, as many of these kits haven’t made it out of IC and those that did died at GB.
This is a **** ton of kits. Hopefully vendors will be on board.i mean i could combine bae kit with addition & cmyk esc with cmyk kit and it’ll be 5 kits, but that would bump up the price by a lot. so i think leaving them separately is the best, for people who actually want them.
I think the idea of keeping kitting prices low is kinda lost when you break up CMYK escapes with the rest of CMYK. Are people really wanting to buy one or the other? I would think most people would want both. The sum of two child kits like this is almost always more expensive than one larger kit.
finally get to try R0 and R5sure! done.
ive been waiting for a cmyk return (hoping both cmyk kits get merged)
in for both kits!
That 2002 kit is sick
Just a minor thing, can we get the icon-mod shift arrows top aligned. See: https://deskthority.net/wiki/Cherry_G80-1000
Opinions on having one red cherry (legend color) of the two windowed 1u? (possibly one of the non-windowed also?)i personally like black better because it goes well with beige, but i guess i can do that. i'll consider it.
hi, mint dolch accent kit please. thank you <3
stepped control!!!
sure! i think it's duplicated, i totally forgot to edit them out in photoshop lol.stepped control!!!
Agreed. I would rather see a stepped Control instead of the Cherry 2.25U enter. Not sure why there are so many 1U R1 Cherry logos in the addition kit.
sure! i think it's duplicated, i totally forgot to edit them out in photoshop lol.stepped control!!!
Agreed. I would rather see a stepped Control instead of the Cherry 2.25U enter. Not sure why there are so many 1U R1 Cherry logos in the addition kit.
actually that makes a lot of sense because retro runic & classic retro zhuyin are offering those in r1 meaning you can get them from those instead of this, and the fact that i am offering r0 meaning you can use them with this. Done :thumb:sure! i think it's duplicated, i totally forgot to edit them out in photoshop lol.stepped control!!!
Agreed. I would rather see a stepped Control instead of the Cherry 2.25U enter. Not sure why there are so many 1U R1 Cherry logos in the addition kit.
may we replace to r0 cherry shinethrough?
actually that makes a lot of sense because retro runic & classic retro zhuyin are offering those in r1 meaning you can get them from those instead of this, and the fact that i am offering r0 meaning you can use them with this. Done :thumb:sure! i think it's duplicated, i totally forgot to edit them out in photoshop lol.stepped control!!!
Agreed. I would rather see a stepped Control instead of the Cherry 2.25U enter. Not sure why there are so many 1U R1 Cherry logos in the addition kit.
may we replace to r0 cherry shinethrough?
any chance for korean add-on? Hasn't been run in a while
https://geekhack.org/index.php?topic=101281.0
hi, mint dolch accent kit please. thank you <3
Will be run with GMK Retro Runic, which is currently in IC too
I finally see this come true. Thank you!hmm i will consider
I personally would like to see the stepped windowed icon mod caps lock in the addition kit, maybe in place of the stepped Control (because I think the HHKB layout should be with the standard Control anyway) if you want to contain the price or just as another keycap in that kit. It was available only in a separate kit of 9009 R2 years ago
sorry to dissapoint you, i'm afraid we don't have room for that.any chance for korean add-on? Hasn't been run in a while
https://geekhack.org/index.php?topic=101281.0
yes korean addon please, would buy this instantly
hi, mint dolch accent kit please. thank you <3
Will be run with GMK Retro Runic, which is currently in IC too
Dolch kit is not mentioned in whole thread by thread starter.
this might be a bit too late but please consider adding Mint Dolch kit
hi, mint dolch accent kit please. thank you <3
Will be run with GMK Retro Runic, which is currently in IC too
I'm very interested in all of these kits.to my knowledge GMK actually doesn't do pad printing, only UV printing. what people have been calling pad-printed legends from GMK, they're actually uv-printed the whole time.
But please, please, for the keys with LED windows: request pad printing rather than UV printing, if GMK is able to do it. I've been consistently disappointed by GMKs UV print; it's noticeably raised from the keycap surface, the legends have HEAVY bleed and low quality, and the font doesn't match with the standard Cherry legends that GMK uses on their doubleshot keys.
This would make or break my interest.
For reference, pictures of GMK KA1953:Show Image(https://cdn.discordapp.com/attachments/942567662976901120/971140217492885526/unknown.png)Show Image(https://cdn.discordapp.com/attachments/942567662976901120/971140446204076042/unknown.png)
Versus Cherry pad print:Show Image(https://live.staticflickr.com/3781/13696313055_0da2c4572d_k.jpg)Show Image(https://cdn.discordapp.com/attachments/942567662976901120/971143875546718228/unknown.png)
2 heart and next line keys are a really neat touch for the addition kit. Any chance of also throwing in the 1u colored keys from that board (cancel, help, go back, enter)?
Jeeesus the Addition kit is so good! Thanks for keeping vim arrows. Can you please consider throwing in a r1 windowed cherry logo key in there as well? Or maybe moving the r0 ones to the r0/r5 kit and having r1 only in Addition. That way we have more freedom in choosing.you make a good point, sure. :thumb:
Hope you understand my ramble. GL!!
to my knowledge GMK actually doesn't do pad printing, only UV printing. what people have been calling pad-printed legends from GMK, they're actually uv-printed the whole time.I had thought the same up until recently; I saw the windowed keys for classic retro zhuyin (https://geekhack.org/index.php?topic=110921.0) were being pad printed. Going by what you've said though, I guess that's incorrect information and will be UV printed too.
I am interested in the 2002 and BAE kits. I agree with the OP to keep the former as small and affordable as possible; however, it may include the R5 versions of its 1.25 mods. Otherwise, the opportunity to get 1.25 mods in this design will be lost forever, like a tear in the rain.
I am interested in the 2002 and BAE kits. I agree with the OP to keep the former as small and affordable as possible; however, it may include the R5 versions of its 1.25 mods. Otherwise, the opportunity to get 1.25 mods in this design will be lost forever, like a tear in the rain.
ooooh, another Blade Runner fan here :thumb:
I am interested in the 2002 and BAE kits. I agree with the OP to keep the former as small and affordable as possible; however, it may include the R5 versions of its 1.25 mods. Otherwise, the opportunity to get 1.25 mods in this design will be lost forever, like a tear in the rain.
ooooh, another Blade Runner fan here :thumb:
I was sure that some of you scifi-cultured pals would notice it.
My favorite replicant.I am interested in the 2002 and BAE kits. I agree with the OP to keep the former as small and affordable as possible; however, it may include the R5 versions of its 1.25 mods. Otherwise, the opportunity to get 1.25 mods in this design will be lost forever, like a tear in the rain.
ooooh, another Blade Runner fan here :thumb:
I was sure that some of you scifi-cultured pals would notice it.
(Attachment Link)
My favorite replicant.I am interested in the 2002 and BAE kits. I agree with the OP to keep the former as small and affordable as possible; however, it may include the R5 versions of its 1.25 mods. Otherwise, the opportunity to get 1.25 mods in this design will be lost forever, like a tear in the rain.
ooooh, another Blade Runner fan here :thumb:
I was sure that some of you scifi-cultured pals would notice it.
(Attachment Link)
This is probably past the time for changes, but just in case: Would you consider adding a 6U centered L9 spacebar?this is very interesting, i will think about this.
It’s shockingly difficult to find, and it would go with so many L9 sets: the beige sets, Froyo, Kaiju, Analog Dreams, etc.
With the general availability of Des sliders and designers making true HHKB layout, it’s likely worth it to add.
Once again, thanks for running this!
I just noticed that you have included a 1u R1 "Back" key that I think belongs to the BAE kit better than to the 40s kit.actually that makes a lot of sense, sure. i'm not going to move it from 40s kit to bae kit tho i'm just going to add another one to bae kit.
this is very interesting, i will think about this.
this is very interesting, i will think about this.
Sweet, 'preesh
this is very interesting, i will think about this.
Sweet, 'preesh
I'm in for true hhkb layout support too. All in for a 6u bar.
Is it just me or the Addition kit shown in the IC is very similar to the 40s kit?Prolly a paste error as additional kit isShow Image(https://i.imgur.com/xltm109.jpg)
*Note* R0 shinethrough keys are rendered in R1 because there's no R0 shinethrough model in Endeavour's file.Oh, I didn't know that there were R0 windowed molds available!
Is it just me or the Addition kit shown in the IC is very similar to the 40s kit?fixedShow Image(https://i.imgur.com/xltm109.jpg)
Just a question, two years delivery time?yes unfortunately
The new BAE kit is excellent. What would be the position of the stem at the BAE's top? Would it be set at the center of the 1.5 space? The Steelseries 7g and 6gv2 have that stem replaced with a long shaft that works like a stabilizer; instead, an ANSI-BAE should have a stem that fits the back-slash-pipe's stem.we'll use the same stem positions as DCS BAE with a stem in the spot of the pipe key for a dummy switch.
In the Addition Kit, will the “♥2” be aligned properly unlike what Emir did with GMK Rouge?yep, it'll be aligned properly.
His reasoning was “But OG was like this”, but OG doesn’t mean it’s better or that it makes sense. There are many OG keyboards with kinky bad layouts for example.
IF you’re gonna reuse the Emir mold please consider adding a properly aligned “♥2” too.
Would appreciate it.
In the Addition Kit, will the “♥2” be aligned properly unlike what Emir did with GMK Rouge?yep, it'll be aligned properly.
His reasoning was “But OG was like this”, but OG doesn’t mean it’s better or that it makes sense. There are many OG keyboards with kinky bad layouts for example.
IF you’re gonna reuse the Emir mold please consider adding a properly aligned “♥2” too.
Would appreciate it.
We will use ANSI Enter stabilizer positions instead of ISO like what GMK has rn.
a switch in ANSI enter position and a dummy switch in ANSI pipe position.QuoteWe will use ANSI Enter stabilizer positions instead of ISO like what GMK has rn.
For BAE, I assume switch position would be on ANSI pipe? Or would we have a switch in ANSI enter position and a dummy switch on ANSI pipe?
Looks great.unfortunately no cuz we don't have enough room for that. :(
Any chance to include a Colevrak kit like with the WOB Extensions? https://geekhack.org/index.php?topic=105239.0
Ooooooh, this is good! Very good! Thank you for making this set, hahaha. I've been wanting these caps for a while now and now perhaps I can finally have them.added! :thumb:
One thing on the Addition kit, though: There is a variant of the ♥2 that has extra colored keys. Two, to be exact -- it's the bracket keys. Here is an album of a keyboard that has those extra keys: https://imgur.com/a/fzwEGhH
And here is a picture for those who just wants a glimpse:Show Image(https://i.imgur.com/urMcmOE.jpeg)
And another one because cats are cute: (These pictures are not mine, so no, I don't own the cat.)Show Image(https://i.imgur.com/4k4tsNQ.jpeg)
I'd love for these two keys to be in the kit as well! I think others would love it as well now that they know this variant exists. Please consider adding these two keys in the kit. :)
Also... I have been getting a few messages asking me about this set because of our similar names. I've been dealing with them just fine, but yes, that indeed has been the case. ;D
Add a normal spacebar kit. My current 7u spacebar is a banana...
thoughts on including r0 relegendables?
Add a normal spacebar kit. My current 7u spacebar is a banana...
This would be nice. I need an extra 7u, haven't been able to find one
ne red or colored cherry windowed cap and 2.25u cap avail? the 1u windowed red cherry cap was last seen on the 2100 HAE board so it would be cool to see it added to one of the kits. and the 2.25u colored cherry logo cap was last seen on GMK ka1953 and I don't know of any other sets that do that specific key in color in the current year. if it's too late to change anything at this point, i understand as well.adding them to addition kit.
i will make a separate kit for that. i will also make cmyk kit smaller, so it doesn’t cost 60$. i want cmyk to be a nice extra pick-up like 2002 considering that there’re a lot of kits and i want this set to focus on beige.Add a normal spacebar kit. My current 7u spacebar is a banana...
This would be nice. I need an extra 7u, haven't been able to find one
agreed, a separate spacebar kit would be fantastic. please consider
Would also love to see at least a 7u/6.25u spacebar added somewhere (maybe R0 + R5 kit?)adding them to bars kit.
Any chance to add a 6u spacebar still? Looks like the Spaceholdings KA1953 revival set doesn't have it and we need it for some true 6u HHKBs that are coming out (AKB Vero, Type-B, Falcon 3.0, etc.).adding both center and offcenter to bars kit
Did you clear the heart 2 mold with the owner?i will make a new mold for that cuz i don’t like the alignment of the <3.
I wouldn't mind, but kono owns rouge these days so you might want to reach out and ask
i will also make cmyk kit smaller, so it doesn’t cost 60$.
i will make a separate kit for that. i will also make cmyk kit smaller, so it doesn’t cost 60$. i want cmyk to be a nice extra pick-up like 2002 considering that there’re a lot of kits and i want this set to focus on beige.Add a normal spacebar kit. My current 7u spacebar is a banana...
This would be nice. I need an extra 7u, haven't been able to find one
agreed, a separate spacebar kit would be fantastic. please considerWould also love to see at least a 7u/6.25u spacebar added somewhere (maybe R0 + R5 kit?)adding them to bars kit.
Is there a date for the OG to run scheduled?i plan to run this some time before hineybeige (probably in september), so people that buy my set have enough money to buy hineybeige and other things ex. gmk hasro/sav when they're dropped. i will finalized the kitting and submit for quote within this week cuz gmk is taking months to get quotes now.
added bars kit & renders with new kitting updated.Is there a date for the OG to run scheduled?i plan to run this some time before hineybeige (probably in september), so people that buy my set have enough money to buy hineybeige and other things ex. gmk hasro/sav when they're dropped. i will finalized the kitting and submit for quote within this week cuz gmk is taking months to get quotes now.
added bars kit & renders with new kitting updated.Is there a date for the OG to run scheduled?i plan to run this some time before hineybeige (probably in september), so people that buy my set have enough money to buy hineybeige and other things ex. gmk hasro/sav when they're dropped. i will finalized the kitting and submit for quote within this week cuz gmk is taking months to get quotes now.
Personally, I went ahead and bought GMK Classic Beige. Now just waiting for this addon and maybe other addons and HASRO/SAV. :)
Ignoring the fact that AltGr as a legend on a 1u keycap barely fits, they’re intentionally not included, same with 1u control.
Sent from my iPhone using Tapatalk
Ignoring the fact that AltGr as a legend on a 1u keycap barely fits, they’re intentionally not included, same with 1u control.
Sent from my iPhone using Tapatalk
HHKB International ... a few sets: GMK Dolch R5, GMK Muted R2, GMK Oblivion V3.1, ...
Ignoring the fact that AltGr as a legend on a 1u keycap barely fits, they’re intentionally not included, same with 1u control.
Sent from my iPhone using Tapatalk
HHKB International ... a few sets: GMK Dolch R5, GMK Muted R2, GMK Oblivion V3.1, ...
It is an HHKB with Cherry adapters, is it? That is a niche within a niche.
Is there any hope for U9 Macro Columns?https://geekhack.org/index.php?topic=110569.0
Is there any hope for U9 Macro Columns?https://geekhack.org/index.php?topic=110569.0
Is there any hope for U9 Macro Columns?https://geekhack.org/index.php?topic=110569.0
I don’t think this is going to run. I’ve been following for 18 months, and both Pwner and Ob have shut the discord channels previously dedicated to GMK Macros. Would love to see it revived!
I would like to request that the 1u backspace key included in the BAE kit use an arrow legend instead of "back" - Or maybe include both keys? 1u R1 arrow backspace keys exist on a few vintage boards (which are pretty hard to come by these days) and this GB would be a great opportunity to have more made.
Any news on quotes yet?nope, i’m still waiting for them to respond.
Definitely in for the BAE setyes, you'll need a dummy switch for the pipe key.
So it would use the ANSI stabs and I'm assuming a dummy switch would have to be used for the pipe switch?
Regarding GB date, it's set to run in 30/10/22-30/11/22.
I be watching...