I've always heard that "GMK screw-in stabilizers" are still manufactured by cherry, just sold through GMK.That's also what I've heard, gmk are simply the brand, they're cherry stabilisers. Bar the screw portion they're identical to cherry.
These are cheaper thoughAs I said earlier, down for cheap gmk stabs for sure, I'd just like clarification if they're actually new, because that's a very big deal if they are given cherry hasn't changed its stab lineup for like. I have no idea how long.
On the 'self tapping screws' comment, gmk stabilisers also have this, in as much as the screw hole isn't threaded, unlike zeal/epbt. I presume that's what that comment alludes to.
Cherry, gmk and zeal attached (in that order).
Sent from my Pixel 3 using Tapatalk
From what I know, GMK and Cherry stabs are the same.Do we know how the smaller dimension is a pro/con? Sorry if that’s a noob question. Doesn’t seem like 2 hundredths of a difference would be a huge difference, but I’m not a material scientist or engineer.
The difference is that the "new" Cherry stabs offered in this GB will have a new wire diameter of 1.52 instead of 1.54. I'm guessing this will be the new standard for both GMK and Cherry stabs offered in the future from now on.
You can buy these screw-in stabs since years, what's all the fuzz about? Or do I miss some feature?
beside the price... why is this a 2019 new model? :)Supposedly new wire diameter of 1.52 instead of 1.54. Don't think it will make that much of a difference, if any. Just the crazy kickass price that draws the attention here.
Hi,
We get a suggestion to add washers in the pack on Reddit.
Contacted washer venders last week.
It's not expensive item, so we'll add it into the kit.
Can anyone attest to how legit this is. I'm pretty interested because of the really low prices, but I am not sure whether its legitimate or not.
Can anyone attest to how legit this is. I'm pretty interested because of the really low prices, but I am not sure whether its legitimate or not.
Why would they build an entire storefront website just to scam?
Can anyone attest to how legit this is. I'm pretty interested because of the really low prices, but I am not sure whether its legitimate or not.
Hi, guys:Ok, now that, is more interesting. Hmmmmm! I'll probably get in in that case, new is new, apologies if I came across skeptical above. It's because I always am haha!
I went to check the sample of stabilizer.
And found they reduce the distance shown below :
(this is plate stab, but I don't have pcb stab file, so I use this pic to show it)Show Image(https://imgur.com/NuUEmW7.jpg)
Old cherry is around 2.67~2.69mm.
New one reduce to 2.3mm.
I can tell the difference between with eye.
And did a quick measuring, might have little measuring error.
And here's GMK vs old cherry:Show Image(https://imgur.com/Fvuh1i0.jpg)
Seems they have the same dimension.
I haven't measure GMK's.
Don't have one in my hand, somebody will mail me one this week, I might able to check it next week.
The change make wires more solid, older one is looser.
But representative has only few samples.
I have no chance to feel how it type.
Not able to tell if the modify makes the stab better now.
Can anyone attest to how legit this is. I'm pretty interested because of the really low prices, but I am not sure whether its legitimate or not.
Genuine Cherry stabs are very cheap in bulk. I bought 100 2u stabs from a USA electronic parts vendor for like 25 bucks. I have no doubt he can get them even cheaper.
Can anyone attest to how legit this is. I'm pretty interested because of the really low prices, but I am not sure whether its legitimate or not.
Genuine Cherry stabs are very cheap in bulk. I bought 100 2u stabs from a USA electronic parts vendor for like 25 bucks. I have no doubt he can get them even cheaper.
100 2u stabs for 25 is very cheap for retail @@.
Even cheaper for some sellers' cost as I know.
Just bought enough to last me a lifetime :thumb:
is it possible to still order? I tried yesterday and the transaction got declinedWeird that it stopped you? My paypal went through and I got a confirmation email. Maybe there was a cancellation or something?
Hi,
The GB has ended.
We'll place the order this week.
And the leading time is roughly 8 weeks.
Delivery time will be around early Mar.
And we'll start packing and sending kits.
Should able to finish before Apr, 2019.
Hi,is it possible to still order? I tried yesterday and the transaction got declinedWeird that it stopped you? My paypal went through and I got a confirmation email. Maybe there was a cancellation or something?
Or maybe they havent caught my order yet and will cancel it after all.
100 2u stabs for 25 is very cheap for retail @@.
Even cheaper for some sellers' cost as I know.
https://www.mouser.com/ProductDetail/540-G99-0742
Hi,is it possible to still order? I tried yesterday and the transaction got declinedWeird that it stopped you? My paypal went through and I got a confirmation email. Maybe there was a cancellation or something?
Or maybe they havent caught my order yet and will cancel it after all.
We forgot to refresh site index thing after disable it.
If you want to cancel it, please tell us :)
I totally forgot about this. :(Will available around May.
Will you run another GB on these? Or will this new version be available at some point?
The page is not loading for me, too late I imagine? i got a 404
100 2u stabs for 25 is very cheap for retail @@.
Even cheaper for some sellers' cost as I know.
https://www.mouser.com/ProductDetail/540-G99-0742
the unit price.....
even cheaper than my half million NTD order...
I believe the mouser link is switch, not stabs.100 2u stabs for 25 is very cheap for retail @@.
Even cheaper for some sellers' cost as I know.
https://www.mouser.com/ProductDetail/540-G99-0742
the unit price.....
even cheaper than my half million NTD order...
Are these screw-in or clip-in?
I believe the mouser link is switch, not stabs.100 2u stabs for 25 is very cheap for retail @@.
Even cheaper for some sellers' cost as I know.
https://www.mouser.com/ProductDetail/540-G99-0742
the unit price.....
even cheaper than my half million NTD order...
Are these screw-in or clip-in?
Bad news T_T
Stabs has arrived Taiwan.
But all of them is old version.
We're checking how many time that send correct will take.
Bad news T_T
Stabs has arrived Taiwan.
But all of them is old version.
We're checking how many time that send correct will take.
Bad news T_T
Stabs has arrived Taiwan.
But all of them is old version.
We're checking how many time that send correct will take.
what is the updated estimated timeframe then?
Well, it's a good thing I paid with PayPal, right?
Well, they need to have some kind of info. They’ve got people’s money and they should be responsible. Not trying to be rude to the GB runner. I’m just saying the company needs to produce answers.
Sent from my iPhone using Tapatalk Pro
Well, they need to have some kind of info. They’ve got people’s money and they should be responsible. Not trying to be rude to the GB runner. I’m just saying the company needs to produce answers.
Sent from my iPhone using Tapatalk Pro
We're confirming the leading time now :)
Well, it's a good thing I paid with PayPal, right?
Calm down, Sennin is a serious duder, he will sort it out :thumb:
Well, it's a good thing I paid with PayPal, right?
Calm down, Sennin is a serious duder, he will sort it out :thumb:
Sorry,
Forgot to update here.
We still not sure when it will arrive Taiwan now.
We've sent all buyers email about choice of waiting or cancel.
If you didn't receive mail, please pm us.
We sent lot of mails in short time, might treat as spam for some mail system :)
I asked for a refund via email, I did have to ask a second time here, but I got my refund within a week/week and a half of originally asking.
Sent from my iPhone using Tapatalk Pro
I mentioned earlier that I was glad that I paid through PayPal and got some heat for that - saying that I needed to calm down.
Well, don't want to say it, but...
May ask for a refund.
May ask for a refund.
any news in regards to this?
any news in regards to this?
Yes. We need to calm down.
any news in regards to this?
Yes. We need to calm down.
So... what’s the news?
PayPal refunded me since there was no response from the vendor on their end. YMMV.
After submitting my PayPal dispute, my refund was done promptly. Seller either didn't respond or didn't want to make a counter-appeal.I rarely login and check paypal account 0.0
All buyers ask for cancel should have received their refund :)
If not, please tell us.
It’s okay :)All buyers ask for cancel should have received their refund :)
If not, please tell us.
Thanks, sennin. My apologies for asking for a refund, but with the deadline approaching I couldn't risk it.
Good luck to all those who've joined and are sticking with it. :thumb:
Hi,
Good news!
Sales just told me that the est deliver is around 8 week O_Q
Finally got update!
Hi,
We're packing them now and start ship the.
FIFO.
But it has to take few days.
All buyers should be able to receive around late Sep :)
It can feel difference from old pcb stabs.Hi,
We're packing them now and start ship the.
FIFO.
But it has to take few days.
All buyers should be able to receive around late Sep :)
I heard the new Cherry stabilizers have issues, can you confirm that your batch is not affected?
I also haven't received mine. I sent a PM a while ago with no response.I just checked message, but there's no message from you.
I haven't received my order yet . My order ID is #000003745
Hi, I forgot that I was in this GB. I have not received my order yet (#000003770).