Author Topic: [IC] KN2.10² (GB Thread Submitted) (Read 20537 times)

ilouis_07 · « **on:** Sun, 13 October 2019, 08:33:51 »

Hey Geekhack friends, I am louis and today I want to bring our new project to the community: KN2.10² by thesiscamper.

Some renders by thesiscamper:

Some renders by myself:

Specs:
Make with 6063 aluminum for the case and brass for the weight.
4mm alum plate with a fixed layout.
Sandwich Mounting Designed.
The typing angle is 5 degrees.
Type C for PCB(QMK).
(Top case has 3 options: WK, WKL, and HHKB.)

Colors:
1)   E yellow + Black + E white

2)   Dark Grey + Cyan + Dark Grey

3)   Silver + Dark Red + Silver

Supported Layout:
Fixed Layout, compatible with stepped caps and split BS.

Timeline:
GB: end of Oct.
(The prototype will be ready in 1 week.)

Total spots we are offering: TBD

Follow our Instagram for the latest updates for the first time:
iLouis_07: https://www.instagram.com/ilumkb_com/
Thesiscamper: https://www.instagram.com/thesiscamper/
Discord Link: https://discord.gg/7upp2Xr

Updates：
Oct 24th, Prototype assembled with 205g0 lubed tangerines

ilouis_07 · « **Reply #1 on:** Sun, 13 October 2019, 08:34:15 »

14th/Oct updates:
All the anodizing colors are customized, Dark Grey Pantone 432C, Cyan Pantone 7710C, Dark Red Pantone 7621C.

pcire · « **Reply #2 on:** Sun, 13 October 2019, 08:35:56 »

👀

Rob27shred · « **Reply #3 on:** Sun, 13 October 2019, 09:05:15 »

What a striking design! I really love the yellow/black/white case (I'm a Yinzer what do you expect?

))! I think it would go perfect with JTK Yolch or GMK Serika. Gonna have to keep an eye on this one for sure. While I have gotten away from using 60% boards lately, I always wanted a high end custom 60% as those are the boards that really drew me into this rabbit hole. I've seen a few designs lately that really caught my eye, but this one might be enough to get me to reach for my wallet!

CodeMayhem · « **Reply #4 on:** Sun, 13 October 2019, 09:47:12 »

how long will the gb last? bc i just joined key65 and have to wait til the end of oct. to join dracula so i'm gonna need til about the 9th to have the money...and i think other ppl are in a similar spot. September and October have been rough on our wallets.

TheArcticFox_27 · « **Reply #5 on:** Sun, 13 October 2019, 12:52:48 »

I've seen thesis post a picture of a half plate, will that be an option?

jaang · « **Reply #6 on:** Sun, 13 October 2019, 17:30:02 »

love this!

nasp · « **Reply #7 on:** Sun, 13 October 2019, 17:33:37 »

Does this take a universal 60% PCB or will it be a custom for the case itself?

Sissy · « **Reply #8 on:** Sun, 13 October 2019, 18:34:35 »

Would love a green and Purple version but regardless super clean and interested.

ilouis_07 · « **Reply #9 on:** Sun, 13 October 2019, 21:01:31 »

Quote from: TheArcticFox_27 on Sun, 13 October 2019, 12:52:48

I've seen thesis post a picture of a half plate, will that be an option?

Yeah, I'd like to bring the half plate in.

ilouis_07 · « **Reply #10 on:** Mon, 14 October 2019, 03:29:01 »

Quote from: nasp on Sun, 13 October 2019, 17:33:37

Does this take a universal 60% PCB or will it be a custom for the case itself?

Yes, universal 60% PCB will fit it. But since it is a fixed-layout keyboard, so we prepared PCB with fixed switch footprints. We think it looks simpler and nicer.

lanyusea · « **Reply #11 on:** Mon, 14 October 2019, 03:34:43 »

will the manufactory be Percent Studio as luo mentioned before?

ilouis_07 · « **Reply #12 on:** Mon, 14 October 2019, 06:54:16 »

Quote from: lanyusea on Mon, 14 October 2019, 03:34:43

will the manufactory be Percent Studio as luo mentioned before?

Nope, this project will handle by me and the manufactory behind is faster and better.

caronte0 · « **Reply #13 on:** Mon, 14 October 2019, 07:19:50 »

The design looks stunning, i really like it. Would love to see it in regular 60 or 65%. Also would be great if you could add to increase the height (for my personal taste 5º is a little bit low)

Mcnos · « **Reply #14 on:** Mon, 14 October 2019, 08:20:41 »

What plate options will be available?

Would love a Polycarb or Half Plate option

VXQN · « **Reply #15 on:** Tue, 15 October 2019, 06:27:11 »

I would say leave the height as-is, so many boards are 7, 8, 9 degrees, and having it a little lower helps to differentiate. The user can always prop the board up a little more if they want to, but you can't "prop it down".

ilouis_07 · « **Reply #16 on:** Tue, 15 October 2019, 09:29:52 »

Quote from: Mcnos on Mon, 14 October 2019, 08:20:41

What plate options will be available?

Would love a Polycarb or Half Plate option

PC plate nope, we are thinking about half plate with the universal layout as add on.

tonny950111 · « **Reply #17 on:** Wed, 16 October 2019, 09:32:34 »

What is the vender in US (Please not Kono Store)

LuiKang · « **Reply #18 on:** Wed, 16 October 2019, 09:49:14 »

Would love to see RGB glow, either side or underglow. PC bottom would also be sufficient.

_PixelNinja · « **Reply #19 on:** Wed, 16 October 2019, 10:29:41 »

It would have been awesome if there were a way to finish the backweight so it would match the accent color (plate)... My only true issue with the case is the the bottom front being raised in relation to the back — I never understood that design choice ever since seing the private GB units. Other than than that I love the design.

victorpre · « **Reply #20 on:** Sun, 20 October 2019, 17:19:57 »

Hello, is there any chance of adding split spacebar support?

Looking forward to this board

Sent from my Pixel 2 XL using Tapatalk

Sifo · « **Reply #21 on:** Sun, 20 October 2019, 17:23:16 »

aw I wish the color combo I wanted was available

Puddsy · « **Reply #22 on:** Sun, 20 October 2019, 18:17:21 »

catchy name

Mcnos · « **Reply #23 on:** Sun, 20 October 2019, 18:52:09 »

Quote from: ilouis_07 on Sun, 13 October 2019, 08:33:51

Show Image

Hey Geekhack friends, I am louis and today I want to bring our new project to the community: KN2.10² by thesiscamper.

Some renders by thesiscamper:
Show Image

Show Image

Show Image

Show Image

Some renders by myself:
Show Image

Show Image

Show Image

Show Image

Specs:
Make with 6063 aluminum for the case and brass for the weight.
4mm alum plate with a fixed layout.
Sandwich Mounting Designed.
The typing angle is 5 degrees.
Type C for PCB(QMK).
(Top case has 3 options: WK, WKL, and HHKB.)

Colors:
1)   E yellow + Black + E white

2)   Dark Grey + Cyan + Dark Grey

3)   Silver + Dark Red + Silver

Supported Layout:
Fixed Layout, compatible with stepped caps and split BS.
Show Image

Timeline:
GB: end of Oct.
(The prototype will be ready in 1 week.)

Total spots we are offering: TBD

Follow our Instagram for the latest updates for the first time:
iLouis_07: https://www.instagram.com/ilouis_07/
Thesiscamper: https://www.instagram.com/thesiscamper/
Discord Link: https://discord.gg/7upp2Xr

You got me at 5 degrees

Abec13 · « **Reply #24 on:** Mon, 21 October 2019, 08:11:52 »

That yellow/black/white HHKB is mine! Let's do this.

stoopidsloth · « **Reply #25 on:** Mon, 21 October 2019, 12:49:30 »

Quote from: Sifo on Sun, 20 October 2019, 17:23:16

aw I wish the color combo I wanted was available

what color combo do you like?

appaboy · « **Reply #26 on:** Mon, 21 October 2019, 12:51:07 »

interesting

Sifo · « **Reply #27 on:** Mon, 21 October 2019, 14:04:42 »

Quote from: stoopidsloth on Mon, 21 October 2019, 12:49:30

Quote from: Sifo on Sun, 20 October 2019, 17:23:16
aw I wish the color combo I wanted was available

what color combo do you like?

dark grey dark red dark grey

Nigolski · « **Reply #28 on:** Mon, 21 October 2019, 14:29:36 »

this is nice

Draxion · « **Reply #29 on:** Mon, 21 October 2019, 15:23:42 »

Will we be able to swap plate and case color. So if I wanted to do black case + red plate would that be an option or only the 3 presets given

ilouis_07 · « **Reply #30 on:** Wed, 23 October 2019, 00:10:20 »

Prototype arrived.

hahihuhei · « **Reply #31 on:** Wed, 23 October 2019, 00:16:16 »

When the prototypes look more rendered then renders

Beautiful~
Good job.

ilouis_07 · « **Reply #32 on:** Wed, 23 October 2019, 01:02:31 »

Quote from: hahihuhei on Wed, 23 October 2019, 00:16:16

When the prototypes look more rendered then renders
Beautiful~
Good job.

Thanks!

Sissy · « **Reply #33 on:** Wed, 23 October 2019, 03:51:29 »

How heavy is the prototype?

Moridin · « **Reply #34 on:** Wed, 23 October 2019, 04:46:07 »

So I guess I need to buy 2 now. One for GMK Phosphorous and one for GMK Lunar. 😉

Love the design, just hoping the price will be in my budget.

ilouis_07 · « **Reply #35 on:** Wed, 23 October 2019, 11:17:03 »

Quote from: Sissy on Wed, 23 October 2019, 03:51:29

How heavy is the prototype?

About 1400 grams, assembled and gmk Keycap mounted.

ilouis_07 · « **Reply #36 on:** Wed, 23 October 2019, 20:03:45 »

New Typing Sound Video updated.

Thanks

nasp · « **Reply #37 on:** Mon, 28 October 2019, 12:28:35 »

GB is live BTW on iLuMKB.com

Your welcome iLouis

Sifo · « **Reply #38 on:** Mon, 28 October 2019, 12:50:08 »

Ohhh there ended up being black + red + black! ！

but what does eblack look like

edit: pics are up now

Mcnos · « **Reply #39 on:** Mon, 28 October 2019, 13:16:33 »

I'll be joining since I now have extra funds.

ilouis_07 · « **Reply #40 on:** Mon, 28 October 2019, 14:22:01 »

GB post submitted, more details in the GB post.

Hope you love this project.

News:

Author Topic: [IC] KN2.10² (GB Thread Submitted) (Read 20537 times)