didn't SP make something similar to this?Martin did
or was it keypop?
How well do these survive international shipping?Well, as far as shipping goes, I think I will use a courier. AFAIK they repackage, but from pictures I have seen of them they look fine. I ordered one already a few days ago, so I can report as how well it survives. If he offers international shipping, I will ask him to package them a bit more.
I've ordered a few in the past and they almost always arrive broken.How well do these survive international shipping?Well, as far as shipping goes, I think I will use a courier. AFAIK they repackage, but from pictures I have seen of them they look fine. I ordered one already a few days ago, so I can report as how well it survives. If he offers international shipping, I will ask him to package them a bit more.
I've ordered a few in the past and they almost always arrive broken.How well do these survive international shipping?Well, as far as shipping goes, I think I will use a courier. AFAIK they repackage, but from pictures I have seen of them they look fine. I ordered one already a few days ago, so I can report as how well it survives. If he offers international shipping, I will ask him to package them a bit more.
I was looking into that. Would be pretty easy to do, but obviously more expensive.I've ordered a few in the past and they almost always arrive broken.How well do these survive international shipping?Well, as far as shipping goes, I think I will use a courier. AFAIK they repackage, but from pictures I have seen of them they look fine. I ordered one already a few days ago, so I can report as how well it survives. If he offers international shipping, I will ask him to package them a bit more.
if that's the case (heh) it might be worth it to just buy a bunch of acrylic and get it cut to shape/size locally within the US
someone investigate that for me
Some through bhiner and some through tabaofocus. They were shipped using international registered mail.I was looking into that. Would be pretty easy to do, but obviously more expensive.I've ordered a few in the past and they almost always arrive broken.How well do these survive international shipping?Well, as far as shipping goes, I think I will use a courier. AFAIK they repackage, but from pictures I have seen of them they look fine. I ordered one already a few days ago, so I can report as how well it survives. If he offers international shipping, I will ask him to package them a bit more.
if that's the case (heh) it might be worth it to just buy a bunch of acrylic and get it cut to shape/size locally within the US
someone investigate that for me
Also spamray, did you order them directly from TaoBao? And how were they shipped, and through who?
Okay, I will ask them when they ship if they can put soft cell foam around the inside.Some through bhiner and some through tabaofocus. They were shipped using international registered mail.I was looking into that. Would be pretty easy to do, but obviously more expensive.I've ordered a few in the past and they almost always arrive broken.How well do these survive international shipping?Well, as far as shipping goes, I think I will use a courier. AFAIK they repackage, but from pictures I have seen of them they look fine. I ordered one already a few days ago, so I can report as how well it survives. If he offers international shipping, I will ask him to package them a bit more.
if that's the case (heh) it might be worth it to just buy a bunch of acrylic and get it cut to shape/size locally within the US
someone investigate that for me
Also spamray, did you order them directly from TaoBao? And how were they shipped, and through who?
Not to derail your thread, but how much would it cost to some acrylic keyboard roofs done in the size of an HHKB, like EK's, but without paying $30+ shipping, even though that's probably what I'll have to do.I have no clue how those are made :(
didn't SP make something similar to this?
or was it keypop?
If your doing international I would be in for one or two.yep
down for oneIf your doing international I would be in for one or two.yep
If your doing international I would be in for one or two.
How well do these survive international shipping?Terribly I already have the super large one and it has cracks in it I would expect these to have minor cracks.
If your doing international I would be in for one or two.
You reckon they'd survive the trip down here, given what SpAmRaY was saying?
Totes down for one, maybe two.I also ordered one like that and it arrived broken.
On an unrelated related note, it sort of reminded me of this, which I hoped to get some day to display artisans:
(Attachment Link)
http://www.aliexpress.com/item/Cherry-Switches-Storage-Box-24pcs-swithces-Cherry-MX-Black-Blue-Brown-Red-Clear-White-Linear-Grey/32265943322.html
How much is 80 YEN? Also; how much would shipping be to sweden, just on average?I don't know about shipping, I will play it by year when it comes. 80yen ~ 13USD
How much is 80 YEN? Also; how much would shipping be to sweden, just on average?I don't know about shipping, I will play it by year when it comes. 80yen ~ 13USD
People seemed interested in these, and I am able to get them :) Pricing will be box, + shipping, + group shipping divided by however many boxes are ordered. Can be seen here: https://item.taobao.com/item.htm?spm=a1z10.1-c.w4004-11124711960.19.8lAthi&id=45612404157
I don't really want to wait that long, so I will start GB for these this week.
People seemed interested in these, and I am able to get them :) Pricing will be box, + shipping, + group shipping divided by however many boxes are ordered. Can be seen here: https://item.taobao.com/item.htm?spm=a1z10.1-c.w4004-11124711960.19.8lAthi&id=45612404157
I don't really want to wait that long, so I will start GB for these this week.
I'm in for 25-50 depending on the cost + shipping.
Once mine arrives, I am going to look into getting an acrylic lid cut. If there is interest, I can have multiple cut to go along with Seth's orders.They come with lids though....
I'll check with him before I do, and see how things are looking.
Are you sure?Once mine arrives, I am going to look into getting an acrylic lid cut. If there is interest, I can have multiple cut to go along with Seth's orders.They come with lids though....
I'll check with him before I do, and see how things are looking.
Yes most definalty I can take a picture when I get home if you want but, its the same one as I bought a month or two ago although I got the largest size one which take like 100+ keys it came with a lid as I can mount it on my wall and the keys stand up correctly!Are you sure?Once mine arrives, I am going to look into getting an acrylic lid cut. If there is interest, I can have multiple cut to go along with Seth's orders.They come with lids though....
I'll check with him before I do, and see how things are looking.
Oh thats great. From all the photos, it looked like it didn't come with one.Yes most definalty I can take a picture when I get home if you want but, its the same one as I bought a month or two ago although I got the largest size one which take like 100+ keys it came with a lid as I can mount it on my wall and the keys stand up correctly!Are you sure?Once mine arrives, I am going to look into getting an acrylic lid cut. If there is interest, I can have multiple cut to go along with Seth's orders.They come with lids though....
I'll check with him before I do, and see how things are looking.
Yeah again if it is the same as what I got which looks the exact same it came with a lid, the body and base of the case was frosty, while the lid is clear acrylicOh thats great. From all the photos, it looked like it didn't came with one.Yes most definalty I can take a picture when I get home if you want but, its the same one as I bought a month or two ago although I got the largest size one which take like 100+ keys it came with a lid as I can mount it on my wall and the keys stand up correctly!Are you sure?Once mine arrives, I am going to look into getting an acrylic lid cut. If there is interest, I can have multiple cut to go along with Seth's orders.They come with lids though....
I'll check with him before I do, and see how things are looking.
OP, any update?I am waiting until ghost juggernaut gets his and we will decide on what to do from there. Depending on quality, it could be possible to have them made on the U.S. If it is around the same price, I hope people don't mind waiting for them to be made in the U.S. I just want to see quality / how well packaged they are. And as far as cost go, I will invoice for case price + domestic shipping first, then once I get the bill for the international shipping I will calculate your percent, and once you pay the second invoice I will ship it out. If you end up not paying the 2nd one I will just refund.
OP, any update?I am waiting until ghost juggernaut gets his and we will decide on what to do from there. Depending on quality, it could be possible to have them made on the U.S. If it is around the same price, I hope people don't mind waiting for them to be made in the U.S. I just want to see quality / how well packaged they are. And as far as cost go, I will invoice for case price + domestic shipping first, then once I get the bill for the international shipping I will calculate your percent, and once you pay the second invoice I will ship it out. If you end up not paying the 2nd one I will just refund.
Yep! Just waiting to see quality/shipping quality. I would hate to order them and have half of them come broken or have them be cheap plasticOP, any update?I am waiting until ghost juggernaut gets his and we will decide on what to do from there. Depending on quality, it could be possible to have them made on the U.S. If it is around the same price, I hope people don't mind waiting for them to be made in the U.S. I just want to see quality / how well packaged they are. And as far as cost go, I will invoice for case price + domestic shipping first, then once I get the bill for the international shipping I will calculate your percent, and once you pay the second invoice I will ship it out. If you end up not paying the 2nd one I will just refund.
sounds good with me, Im in no rush at all. Ive seen a lot of ICs go nowhere, so I was just wondering if you were still here basically
If your not too fussed its coming from me, they are good quality, the acrylic is around 7mm thick, the sides use a frosted acyclic while the base and lid use a clear acrylic the lid opens super smoothly without much problems, the only part required to build are the inserts inside the box which all just slot together I would advice using a little glue and you might need to heat them up as they come somewhat warped but fit very well overall the case is good, I suspect the one I ordered is only damaged due to the size but if possible I would recommend getting these cut in the US rather than ordering for overseas as you will get a lot with cracks just due to the cheaper acrylic used and its super hard to stop it cracking, just worried as if you plan to sell these you may end up with a lot coming back, I would recommend getting them made and using a thick acrylic like what Martinyeah used for his box, as that is almost impossible to break! also pictures!Yep! Just waiting to see quality/shipping quality. I would hate to order them and have half of them come broken or have them be cheap plasticOP, any update?I am waiting until ghost juggernaut gets his and we will decide on what to do from there. Depending on quality, it could be possible to have them made on the U.S. If it is around the same price, I hope people don't mind waiting for them to be made in the U.S. I just want to see quality / how well packaged they are. And as far as cost go, I will invoice for case price + domestic shipping first, then once I get the bill for the international shipping I will calculate your percent, and once you pay the second invoice I will ship it out. If you end up not paying the 2nd one I will just refund.
sounds good with me, Im in no rush at all. Ive seen a lot of ICs go nowhere, so I was just wondering if you were still here basically
Thanks!Show ImageShow ImageShow ImageShow ImageShow ImageOP, any update?I am waiting until ghost juggernaut gets his and we will decide on what to do from there. Depending on quality, it could be possible to have them made on the U.S. If it is around the same price, I hope people don't mind waiting for them to be made in the U.S. I just want to see quality / how well packaged they are. And as far as cost go, I will invoice for case price + domestic shipping first, then once I get the bill for the international shipping I will calculate your percent, and once you pay the second invoice I will ship it out. If you end up not paying the 2nd one I will just refund.
sounds good with me, Im in no rush at all. Ive seen a lot of ICs go nowhere, so I was just wondering if you were still here basically
Yep! Just waiting to see quality/shipping quality. I would hate to order them and have half of them come broken or have them be cheap plastic
If your not too fussed its coming from me, they are good quality, the acrylic is around 7mm thick, the sides use a frosted acyclic while the base and lid use a clear acrylic the lid opens super smoothly without much problems, the only part required to build are the inserts inside the box which all just slot together I would advice using a little glue and you might need to heat them up as they come somewhat warped but fit very well overall the case is good, I suspect the one I ordered is only damaged due to the size but if possible I would recommend getting these cut in the US rather than ordering for overseas as you will get a lot with cracks just due to the cheaper acrylic used and its super hard to stop it cracking, just worried as if you plan to sell these you may end up with a lot coming back, I would recommend getting them made and using a thick acrylic like what Martinyeah used for his box, as that is almost impossible to break! also pictures!
(http://i1081.photobucket.com/albums/j350/fire_brand15/225A1843-D257-4404-90F5-46050154B13F.jpg) (http://s1081.photobucket.com/user/fire_brand15/media/225A1843-D257-4404-90F5-46050154B13F.jpg.html)
(http://i1081.photobucket.com/albums/j350/fire_brand15/E04210D5-A86F-4C9E-B9FB-80749E37321E.jpg) (http://s1081.photobucket.com/user/fire_brand15/media/E04210D5-A86F-4C9E-B9FB-80749E37321E.jpg.html)
Thats the damage that mine came with just as a fyi to you.
(http://i1081.photobucket.com/albums/j350/fire_brand15/A4DB948F-4369-4311-9C6C-254FCD79796A.jpg) (http://s1081.photobucket.com/user/fire_brand15/media/A4DB948F-4369-4311-9C6C-254FCD79796A.jpg.html)
Showing how the keys stand up when the lid is on, I would recommend mounting this to a wall in a picture frame type move as it will look rather nice.
(http://i1081.photobucket.com/albums/j350/fire_brand15/DD9319C6-4ECF-4774-82C6-65721F79F5F9.jpg) (http://s1081.photobucket.com/user/fire_brand15/media/DD9319C6-4ECF-4774-82C6-65721F79F5F9.jpg.html)
Just showing how they lean against the lid to stand
(http://i1081.photobucket.com/albums/j350/fire_brand15/9239D1CA-248C-4D19-BB22-C05AA08FA70C.jpg) (http://s1081.photobucket.com/user/fire_brand15/media/9239D1CA-248C-4D19-BB22-C05AA08FA70C.jpg.html)
The lid
(http://i1081.photobucket.com/albums/j350/fire_brand15/F1B26D6F-66EA-46DC-895D-326CF8DAB4D9.jpg) (http://s1081.photobucket.com/user/fire_brand15/media/F1B26D6F-66EA-46DC-895D-326CF8DAB4D9.jpg.html)
Has a little frosted bit glue to it to use as a handle.
Also the cracks are not all the way through just internal to the parts
No problem, also thats from it being super well packaged as well, it came in a large cardboard box and in like three layers of bubblewrapThanks!Show ImageShow ImageShow ImageShow ImageShow ImageOP, any update?I am waiting until ghost juggernaut gets his and we will decide on what to do from there. Depending on quality, it could be possible to have them made on the U.S. If it is around the same price, I hope people don't mind waiting for them to be made in the U.S. I just want to see quality / how well packaged they are. And as far as cost go, I will invoice for case price + domestic shipping first, then once I get the bill for the international shipping I will calculate your percent, and once you pay the second invoice I will ship it out. If you end up not paying the 2nd one I will just refund.
sounds good with me, Im in no rush at all. Ive seen a lot of ICs go nowhere, so I was just wondering if you were still here basically
Yep! Just waiting to see quality/shipping quality. I would hate to order them and have half of them come broken or have them be cheap plastic
If your not too fussed its coming from me, they are good quality, the acrylic is around 7mm thick, the sides use a frosted acyclic while the base and lid use a clear acrylic the lid opens super smoothly without much problems, the only part required to build are the inserts inside the box which all just slot together I would advice using a little glue and you might need to heat them up as they come somewhat warped but fit very well overall the case is good, I suspect the one I ordered is only damaged due to the size but if possible I would recommend getting these cut in the US rather than ordering for overseas as you will get a lot with cracks just due to the cheaper acrylic used and its super hard to stop it cracking, just worried as if you plan to sell these you may end up with a lot coming back, I would recommend getting them made and using a thick acrylic like what Martinyeah used for his box, as that is almost impossible to break! also pictures!
(http://i1081.photobucket.com/albums/j350/fire_brand15/225A1843-D257-4404-90F5-46050154B13F.jpg) (http://s1081.photobucket.com/user/fire_brand15/media/225A1843-D257-4404-90F5-46050154B13F.jpg.html)
(http://i1081.photobucket.com/albums/j350/fire_brand15/E04210D5-A86F-4C9E-B9FB-80749E37321E.jpg) (http://s1081.photobucket.com/user/fire_brand15/media/E04210D5-A86F-4C9E-B9FB-80749E37321E.jpg.html)
Thats the damage that mine came with just as a fyi to you.
(http://i1081.photobucket.com/albums/j350/fire_brand15/A4DB948F-4369-4311-9C6C-254FCD79796A.jpg) (http://s1081.photobucket.com/user/fire_brand15/media/A4DB948F-4369-4311-9C6C-254FCD79796A.jpg.html)
Showing how the keys stand up when the lid is on, I would recommend mounting this to a wall in a picture frame type move as it will look rather nice.
(http://i1081.photobucket.com/albums/j350/fire_brand15/DD9319C6-4ECF-4774-82C6-65721F79F5F9.jpg) (http://s1081.photobucket.com/user/fire_brand15/media/DD9319C6-4ECF-4774-82C6-65721F79F5F9.jpg.html)
Just showing how they lean against the lid to stand
(http://i1081.photobucket.com/albums/j350/fire_brand15/9239D1CA-248C-4D19-BB22-C05AA08FA70C.jpg) (http://s1081.photobucket.com/user/fire_brand15/media/9239D1CA-248C-4D19-BB22-C05AA08FA70C.jpg.html)
The lid
(http://i1081.photobucket.com/albums/j350/fire_brand15/F1B26D6F-66EA-46DC-895D-326CF8DAB4D9.jpg) (http://s1081.photobucket.com/user/fire_brand15/media/F1B26D6F-66EA-46DC-895D-326CF8DAB4D9.jpg.html)
Has a little frosted bit glue to it to use as a handle.
Also the cracks are not all the way through just internal to the parts
They are out of stock, even though they show that they are not. We will look into having them made over here :)
Don't have enough artisans yet for one of those beasts
I am going to work on a design this weekend. I just wanted to know what people would prefer in a box. I personally felt like 3x5 trays would be nice, and have a drawer system to hold multiple. If not that, then possibly a flat tray to display them all, similar to the ones this was originally started for.I'm interested in the original IC design, but also interested in checking out the other layout.
Let me know what everyone thinks. I will most likely make the box for myself, but I can design something else for the IC if people don't like that setup.
I am going to work on a design this weekend. I just wanted to know what people would prefer in a box. I personally felt like 3x5 trays would be nice, and have a drawer system to hold multiple. If not that, then possibly a flat tray to display them all, similar to the ones this was originally started for.
Let me know what everyone thinks. I will most likely make the box for myself, but I can design something else for the IC if people don't like that setup.
Ohh also to note, they do not fit keycaps such as zombro's due to the size and other keycaps around that size, but fit most everything else
I am going to work on a design this weekend. I just wanted to know what people would prefer in a box. I personally felt like 3x5 trays would be nice, and have a drawer system to hold multiple. If not that, then possibly a flat tray to display them all, similar to the ones this was originally started for.
Let me know what everyone thinks. I will most likely make the box for myself, but I can design something else for the IC if people don't like that setup.
I am going to work on a design this weekend. I just wanted to know what people would prefer in a box. I personally felt like 3x5 trays would be nice, and have a drawer system to hold multiple. If not that, then possibly a flat tray to display them all, similar to the ones this was originally started for.Could you make it possibly wallmountable like a picture frame maybe like 4 holes in the corners to put screws into ? :x
Let me know what everyone thinks. I will most likely make the box for myself, but I can design something else for the IC if people don't like that setup.
I'm sure I could figure something out.I am going to work on a design this weekend. I just wanted to know what people would prefer in a box. I personally felt like 3x5 trays would be nice, and have a drawer system to hold multiple. If not that, then possibly a flat tray to display them all, similar to the ones this was originally started for.Could you make it possibly wallmountable like a picture frame maybe like 4 holes in the corners to put screws into ? :x
Let me know what everyone thinks. I will most likely make the box for myself, but I can design something else for the IC if people don't like that setup.
I was thinking more along the lines of a storage case of sorts, with slide out trays. It would be less of a display case though. If people don't want it, I'd be happy to make one similar to the one from taobao.I am going to work on a design this weekend. I just wanted to know what people would prefer in a box. I personally felt like 3x5 trays would be nice, and have a drawer system to hold multiple. If not that, then possibly a flat tray to display them all, similar to the ones this was originally started for.
Let me know what everyone thinks. I will most likely make the box for myself, but I can design something else for the IC if people don't like that setup.
I would personally like something larger than 3x5, like 5x5 or larger. Just so I don't have to worry about buying another box anytime soon
Updates?No big ones, gotta think through some stuff first. They are out of stock, not sure if I mentioned that. I will look at having them made.
Okay, I know a way to do it. I will make some autocad drawings, take it to a few different places, and have them cut. I will then make it a DIY pack w/ acrylic cement.
Nope, I know a way to do it so you only need to cement the wallsOkay, I know a way to do it. I will make some autocad drawings, take it to a few different places, and have them cut. I will then make it a DIY pack w/ acrylic cement.
Acrylic cement? To, like, put the slots where we want them?
I was using switch testers as displays for the few artisans I have, but would prefer acrylic boxes so as to use the keycap stems as little as possible.
any word on this? my artisans are piling up...
I was thinking more along the lines of a storage case of sorts, with slide out trays. It would be less of a display case though. If people don't want it, I'd be happy to make one similar to the one from taobao.I am going to work on a design this weekend. I just wanted to know what people would prefer in a box. I personally felt like 3x5 trays would be nice, and have a drawer system to hold multiple. If not that, then possibly a flat tray to display them all, similar to the ones this was originally started for.
Let me know what everyone thinks. I will most likely make the box for myself, but I can design something else for the IC if people don't like that setup.
I would personally like something larger than 3x5, like 5x5 or larger. Just so I don't have to worry about buying another box anytime soon
Exactly that. I have a thread about what I'm making. I should have a sample here soon.I was thinking more along the lines of a storage case of sorts, with slide out trays. It would be less of a display case though. If people don't want it, I'd be happy to make one similar to the one from taobao.I am going to work on a design this weekend. I just wanted to know what people would prefer in a box. I personally felt like 3x5 trays would be nice, and have a drawer system to hold multiple. If not that, then possibly a flat tray to display them all, similar to the ones this was originally started for.
Let me know what everyone thinks. I will most likely make the box for myself, but I can design something else for the IC if people don't like that setup.
I would personally like something larger than 3x5, like 5x5 or larger. Just so I don't have to worry about buying another box anytime soon
In terms of slide-out drawers, are you talking about something similar to the old GasMask/HKP acrylic displays?
Exactly that. I have a thread about what I'm making. I should have a sample here soon.I was thinking more along the lines of a storage case of sorts, with slide out trays. It would be less of a display case though. If people don't want it, I'd be happy to make one similar to the one from taobao.I am going to work on a design this weekend. I just wanted to know what people would prefer in a box. I personally felt like 3x5 trays would be nice, and have a drawer system to hold multiple. If not that, then possibly a flat tray to display them all, similar to the ones this was originally started for.
Let me know what everyone thinks. I will most likely make the box for myself, but I can design something else for the IC if people don't like that setup.
I would personally like something larger than 3x5, like 5x5 or larger. Just so I don't have to worry about buying another box anytime soon
In terms of slide-out drawers, are you talking about something similar to the old GasMask/HKP acrylic displays?
Any update on this.I'm eager to get one.
I like this! Would prefer a smaller one though because I don't have that many artisans.
For those that just can't wait for this GB to happen:
http://www.amazon.com/gp/product/B00FZ35MDW
For those that just can't wait for this GB to happen:
http://www.amazon.com/gp/product/B00FZ35MDW
Will a keycap fit in there snug, if so.. PERFECT! :)
I like this! Would prefer a smaller one though because I don't have that many artisans.
I know how to make this for a large capacity and accommodate your situation:
Buy more artisans!
Did someone find anything like this in EU? Also... is a medicine compartment box good for keycaps?
I would REALLY like for this to happen, or at least ghostjuggernaut's. It seems artisan boxes are hard to come by, or are no longer in production, but surely there are many others out there that have need for them. Especially now that the keycap community has grown and we're seeing more artisans for other switch types.I'm still waiting on info. The manufacturer I am using is pretty backed up right now, and a prototype isn't high on the priority list. Once I get info I'll update GH.
For those that just can't wait for this GB to happen:
http://www.amazon.com/gp/product/B00FZ35MDW
Will a keycap fit in there snug, if so.. PERFECT! :)
It looks like a good one, but it's too high and the caps will move around.
Necro bump, how can i haz this
EDIT: trying out taobaofocus.com, i'll report back how it goes :))
For those that just can't wait for this GB to happen:
http://www.amazon.com/gp/product/B00FZ35MDW
Will a keycap fit in there snug, if so.. PERFECT! :)
It looks like a good one, but it's too high and the caps will move around.
this is what I use.
My key-wala's are snug but other caps have room around them.
(Attachment Link)
edit: with other cap variations
(Attachment Link)
Necro bump, how can i haz this
EDIT: trying out taobaofocus.com, i'll report back how it goes :))
Yeah, that's your only bet.For those that just can't wait for this GB to happen:
http://www.amazon.com/gp/product/B00FZ35MDW
Will a keycap fit in there snug, if so.. PERFECT! :)
It looks like a good one, but it's too high and the caps will move around.
this is what I use.
My key-wala's are snug but other caps have room around them.
[attachimg=1]
edit: with other cap variations
[attachimg=2]
What is that? Might be good for taller caps.
http://www.amazon.com/gp/product/B00FZ35MDW
For those that just can't wait for this GB to happen:
http://www.amazon.com/gp/product/B00FZ35MDW
Will a keycap fit in there snug, if so.. PERFECT! :)
It looks like a good one, but it's too high and the caps will move around.
this is what I use.
My key-wala's are snug but other caps have room around them.
(Attachment Link)
edit: with other cap variations
(Attachment Link)
Necro bump, how can i haz this
EDIT: trying out taobaofocus.com, i'll report back how it goes :))
Yeah, that's your only bet.For those that just can't wait for this GB to happen:
http://www.amazon.com/gp/product/B00FZ35MDW
Will a keycap fit in there snug, if so.. PERFECT! :)
It looks like a good one, but it's too high and the caps will move around.
this is what I use.
My key-wala's are snug but other caps have room around them.
(Attachment Link)
edit: with other cap variations
(Attachment Link)
What is that? Might be good for taller caps.
Show Image(https://gd1.alicdn.com/bao/uploaded/i1/1955077797/TB2Zv8VkpXXXXXfXpXXXXXXXXXX_!!1955077797.jpg_600x600.jpg)
Went for 2x of these, I'll report with pics when I get em ~ They look a little more premium than some of the other boxes on taobao
Not gunna lie, almost ordered this too:Show Image(https://img.alicdn.com/imgextra/i2/1036749196/TB2WVGyaXXXXXb9XpXXXXXXXXXX_!!1036749196.jpg)
Show Image(https://gd1.alicdn.com/bao/uploaded/i1/1955077797/TB2Zv8VkpXXXXXfXpXXXXXXXXXX_!!1955077797.jpg_600x600.jpg)
Went for 2x of these, I'll report with pics when I get em ~ They look a little more premium than some of the other boxes on taobao
Not gunna lie, almost ordered this too:Show Image(https://img.alicdn.com/imgextra/i2/1036749196/TB2WVGyaXXXXXb9XpXXXXXXXXXX_!!1036749196.jpg)
nice finds.
do you have links?
Damn wish I had seen the stealthier looking ones before ordering some of the regular ones linked in the OP
Ha, I remember seeing those super stealthy ones, ketch. But I've still got room the ones I have so I'm going to wait until I need more space.
Well that's a bummer. They look sleek but seeing it in your photos, in a more realistic setting, makes them more fashionable than functional.
You say there's really close space from Bruce to the lid; does that mean Bruce will fit at all? I have the sliding-lid version from TaoBao and Bruce will not fit at all.
Funny that you mention Bhiner instead. I was thinking of using FOCUS next because Bhiner ripped me off in my last order. :))
Show Image(http://i.imgur.com/zmCdKBN.jpg)
overpaid on taobao again --- but am really happy with this oneShow Image(http://i.imgur.com/su2CaYA.jpg)
its tall enough for all artisans!!Show Image(http://i.imgur.com/LN3NeYQ.jpg)
and trays come out as well as seen on my timestamp for MM :rolleyes:
My one criticism is that the little separators are fragile and really only kind of hold them in place-- they will fall out of place easier than higher walled boxes~~
other than that, I can recommend :thumb:
Show Image(http://i.imgur.com/zmCdKBN.jpg)
overpaid on taobao again --- but am really happy with this oneShow Image(http://i.imgur.com/su2CaYA.jpg)
its tall enough for all artisans!!Show Image(http://i.imgur.com/LN3NeYQ.jpg)
and trays come out as well as seen on my timestamp for MM :rolleyes:
My one criticism is that the little separators are fragile and really only kind of hold them in place-- they will fall out of place easier than higher walled boxes~~
other than that, I can recommend :thumb:
Excellent! I saw nguyen had that one and was intrigued, so I looked it up on TaoBao.
I like how it's clear, but I'm still iffy about the drawers. I'd like to be able to look at all my caps at once, but I guess this solution is the best if you want a drawered organizer. And it's tall enough for tall caps! I bookmarked it, so definitely plan on ordering one in the future.
Can you move the rows and columns around? I have wider caps; if so, are there enough to maybe fit a space bar in there?