Post by: TriangleLab on Fri, 29 June 2018, 02:21:54
User manual
BLE User manual
https://github.com/TriangleLab/TR60/blob/master/TR%2060%20%E5%BC%80%E7%AE%B1%E9%A1%BB%E7%9F%A5%20TR60%20Instruction.md
TR60 Github
https://github.com/TriangleLab/TR60
Update:
Wired PCB order & Case Only Order packages had gave to Post company.
I will send track code tomorrow through email for everyone.
(https://i.loli.net/2018/06/29/5b35d95817613.jpg)
(https://i.loli.net/2018/06/29/5b35d958b2da7.jpg)
Hi geekhackers, this is a group buy we've prepared for a quite long time but has been delayed a lot because of the infamous AL1 GB we run for Alsoran. We hope we can prove our abilities in this group buy that directly run by Triangle Lab. The manufacturer and suppliers, different from Alsoran's sources, are very reliable. Most importantly, we will do the QC by ourselves to make sure everything goes well.
Three of our creations are included in this GB:
- TR60 - 60% keyboard case with integrated plate
- MickeyBoard 1.0 Plus - 60% Bluetooth only PCB
- TR60w 1.0 - 60% hot swappable wired(USB) PCB
Each one can be bought individually.
1. TR60 keyboard case with integrated plate
(https://i.loli.net/2018/06/29/5b35d958a6eb9.jpg)
(https://i.loli.net/2018/06/29/5b35d958a852b.jpg)
(https://i.loli.net/2018/06/29/5b35d9591d9b1.jpg)
- Integrated plate
- 6061 aluminum top and bottom cases
- Acrylic, aluminum, or brass back plate. The Bluetooth PCB can only work with acrylic back plate.
- Two types of top case: standard or HHKB style
- Compatible with most 60% PCBs
- Price: $120
- Layout:
- Colors:
More
(https://i.loli.net/2018/06/29/5b35da8658c1b.jpg)
Black
(https://i.loli.net/2018/06/29/5b35da86b2eae.jpg)
Titanium grey
(https://i.loli.net/2018/06/29/5b35da8657dce.jpg)
Iron grey
(https://i.loli.net/2018/06/29/5b35da8686756.jpg)
Midnight blue
(https://i.loli.net/2018/06/29/5b35da86af56c.jpg)
Red
Check color samples above
2. 60% Bluetooth only PCB
(https://i.loli.net/2018/06/29/5b35da9b9cdba.jpg)
- Bluetooth 4.0 provided by Nordic nRF51822
- Battery life: more than 6 months
- Powered by 3 AAA alkaline batteries
- Fully programmable with an online configurator
- Price: $40
- Layout:
Optional Bluetooth dongle: The dongle can be used with MickeyBoard PCB only. Your PC will recognize the dongle as a wired keyboard instead of a Bluetooth keyboard if you use this dongle. The price is $15.
(https://i.loli.net/2018/06/29/5b35da855e97a.jpg)
3. 60% hot swappable wired(USB) PCB
(https://i.loli.net/2018/06/29/5b35da9ba0044.jpg)
- Kailh hot swappable sockets
- QMK support
- Price: $40
- Layout:
Timeline
GB ends on July 10th
Lead time: 75 days
The shipping cost will be invoiced separately before shipping.
Find detailed options and place your order here: https://docs.google.com/forms/d/1ITN0pfnzeQURmQk2G9QEU5oqXRdaGWL_oXVESEKxPrA
Edit:
1. The case is 800g(1.76lbs) with default acrylic back plate.
2. height of front and rear
(https://i.loli.net/2018/06/30/5b37853332873.jpg)
3. Thickness of plate
(https://i.loli.net/2018/06/30/5b378532ea2b9.png)
4. The layout figure is updated
Post by: Signature on Fri, 29 June 2018, 09:09:52
Post by: ChrisSwires on Fri, 29 June 2018, 09:30:53
Post by: tikkaman on Fri, 29 June 2018, 09:48:42
Sent from my SM-G950U1 using Tapatalk
Post by: Petch on Fri, 29 June 2018, 09:51:01
Post by: itsundone on Fri, 29 June 2018, 10:27:09
Post by: HamKenobi on Fri, 29 June 2018, 10:41:24
I might be in for a black or gray one with a a hotswap PCB.
Post by: lumpofunworth on Fri, 29 June 2018, 11:18:39
Sent from my iPhone using Tapatalk
Post by: Poesjuh on Fri, 29 June 2018, 11:34:20
Sent from my iPad using Tapatalk
Post by: Vadurr on Fri, 29 June 2018, 11:34:54
Post by: kawasaki161 on Fri, 29 June 2018, 12:27:16
1: do you have a better pic of the Midnight Blue? The picture is pretty bad.
2: is it possible to get a board in the green-grey-ish color one of the protos is in? I really like that.
Post by: beekey on Fri, 29 June 2018, 13:27:15
Post by: Yeoh on Fri, 29 June 2018, 16:26:28
Post by: R4WBIT on Fri, 29 June 2018, 16:29:35
Post by: Vadurr on Fri, 29 June 2018, 16:39:55
Dedicated ANSI, please.
I second this.
Post by: forumusername on Fri, 29 June 2018, 19:06:23
I will 2nd that TriangleLab had excellent communication with AL1 GB with the issues that occurred
Sent from my PH-1 using Tapatalk
Post by: TriangleLab on Sat, 30 June 2018, 08:30:01
Liking it, pretty interested (in the none hotswap) how thick is the plate out of curiosity? Apologies if I missed it, but I couldn't see it listed above?
(https://i.loli.net/2018/06/30/5b378532ea2b9.png)
The plate is 4mm thick in most areas but 1.5mm thick around the switch
Post by: TriangleLab on Sat, 30 June 2018, 08:39:12
This looks pretty neat! How much does the case weigh and what's the typing angle? And any chance we could have different colors for the top and bottom?
Sent from my SM-G950U1 using Tapatalk
The case is 800g(1.76lbs) with default acrylic back plate. The angle is around 6 degree.
We're not providing the option for having different colors for top and bottom this time. Alsoran was providing 13 colors for top and bottom in the AL1 GB I ran. After seeing his failure on management, I'm very cautious about the options in the GB I run for myself. We're providing very basic colors with less flexibility to make sure this GB goes smoothly.
Post by: TriangleLab on Sat, 30 June 2018, 08:45:48
Just want to say TriangleLab has been very helpful throughout the disaster that was AL1 and to reiterate that he wasn't manufacturing that board, just helping to run the GB
Thank you Petch. I won't be able to run this GB without all your AL1 buyers' patience and support. There are still several AL1 orders not fully fulfilled or need after-sale services. I'm keeping my eyes on these orders in the meanwhile.
Post by: TriangleLab on Sat, 30 June 2018, 08:50:07
Tempted to join for 1 or 2 pcbs, but dont know how much the shipping cost will be. Any estimate shipping cost to SEA?
The shipping fee will be calculated according to the weight of package before shipping. The choice of delivery service matters a lot as well. For just two PCBs, I would estimate the shipping fee lower than $30 with DHL.
Post by: TriangleLab on Sat, 30 June 2018, 08:52:18
One of the pics looks to be having a green case?? Is that possible? Or only those in the form?
Sent from my iPad using Tapatalk
That case actually is black. The lighting makes the color is little confusing.
Post by: TriangleLab on Sat, 30 June 2018, 08:53:32
How much does this board weigh? How tall is the front of the keyboard? Interested :)
The case is 800g(1.76lbs) with default acrylic back plate.
(https://i.loli.net/2018/06/30/5b37853332873.jpg)
Post by: lumpofunworth on Sat, 30 June 2018, 08:55:48
Sent from my iPhone using Tapatalk
Post by: TriangleLab on Sat, 30 June 2018, 08:56:52
I've got two color questions:
1: do you have a better pic of the Midnight Blue? The picture is pretty bad.
2: is it possible to get a board in the green-grey-ish color one of the protos is in? I really like that.
1. Sure. Here (https://i.loli.net/2018/06/30/5b37853349100.jpg) you are.
2. That prototype is actually black. There's a color distortion due to the lighting.
Post by: TriangleLab on Sat, 30 June 2018, 08:58:02
Just to confirm, the plate of the case will not support the 3u space layout?
No, sadly it won't support 3u space layout.
Post by: tikkaman on Sat, 30 June 2018, 09:03:40
That's going to look great with the brass backplateI've got two color questions:
1: do you have a better pic of the Midnight Blue? The picture is pretty bad.
2: is it possible to get a board in the green-grey-ish color one of the protos is in? I really like that.
1. Sure. Here (https://i.loli.net/2018/06/30/5b37853349100.jpg) you are.
2. That prototype is actually black. There's a color distortion due to the lighting.
Sent from my SM-G950U1 using Tapatalk
Post by: TriangleLab on Sat, 30 June 2018, 09:17:13
Dedicated ANSI, please.
Dedicated ANSI, please.
I second this.
I like dedicated layouts as well but you know, there's always a tradeoff between requests and MOQ.
Post by: TriangleLab on Sat, 30 June 2018, 09:19:41
Damn, no wkl layout? Would buy instantly...
Thanks for reminding me. Actually, the standard version does support WKL layout(without 1u blockers). WKL (2u backspace, with 1u windows keys) and HHKB layout (1.5u backspace) are two of my favorite 60% layouts. The layout figure is updated.
Post by: Keebmeupscotty on Sat, 30 June 2018, 09:53:29
Also, in the diagram it looks like that hotswap wired pcb might have smd rgb leds, but I could be looking at diodes. I think you would have mentioNed if it were rgb, but wanted to ask just in case.
Post by: Puddsy on Sat, 30 June 2018, 10:03:46
Post by: kiwi99 on Sat, 30 June 2018, 13:32:11
Post by: catamscott on Sat, 30 June 2018, 16:52:08
Post by: rfindra on Sat, 30 June 2018, 18:09:42
Looks great! Seems like we can only choose one backplate option in the form though? Is it possible to get two? Interested in the acrylic and the brass options both if possible.
just want to make sure,
1. this case (tr60) support standard 60% pcb like dz60/gh60/leeku f3 etc?
2. same with Keebmeupscotty up there, can i order 2 backplate (alumunium/brass and acrilyc)?
3. is the plate support switch top removal? or you can change the plate to support switch top removal?
4. can i use other bluetooth dongle in the market? or maybe can i use bluetooth on my wireless card(laptop)? (never use bluetooth keyboard before.)
Post by: meluvis on Sat, 30 June 2018, 22:55:02
Post by: nu_types on Sat, 30 June 2018, 23:12:50
edit: also, would it be possible to order more than one back piece (i.e. the black acrylic and an aluminum piece)?
Post by: TriangleLab on Sun, 01 July 2018, 02:25:39
Looks great! Seems like we can only choose one backplate option in the form though? Is it possible to get two? Interested in the acrylic and the brass options both if possible.
Also, in the diagram it looks like that hotswap wired pcb might have smd rgb leds, but I could be looking at diodes. I think you would have mentioNed if it were rgb, but wanted to ask just in case.
Feel free to PM me if you want to order more than one back plate.
The wired PCB support SINGLE color 3528 LEDs. The PCB will come with a set of these LEDs. I forgot to add the option for the color of LEDs. Will send emails later to those who order the wired PCB.
Post by: TriangleLab on Sun, 01 July 2018, 02:35:38
just want to make sure,
1. this case (tr60) support standard 60% pcb like dz60/gh60/leeku f3 etc?
2. same with Keebmeupscotty up there, can i order 2 backplate (alumunium/brass and acrilyc)?
3. is the plate support switch top removal? or you can change the plate to support switch top removal?
4. can i use other bluetooth dongle in the market? or maybe can i use bluetooth on my wireless card(laptop)? (never use bluetooth keyboard before.)
1. Yes.
2. Sure. Feel free to contact me if you want to order more than 1
3. No, the plate doesn't support switch top removal. The wired PCB is hot-swappable tho.
4. Sure you can use other Bluetooth dongles or the built-in Bluetooth modules in your laptop. The dongle we provide works like the Logitech Unifying receiver.
Post by: TriangleLab on Sun, 01 July 2018, 02:36:24
Does the wired PCB support USB C or USB mini?
USB C is the future :thumb:
Post by: bobdenard on Sun, 01 July 2018, 02:39:44
Just wondering, is there a reason all PCBs out there are either hotswappable or Bluetooth, but never both? I can’t figure out why...
Sent from my iPhone using Tapatalk
Post by: Aerizu on Sun, 01 July 2018, 05:14:17
And wow, this will be USB Type C? You got me, I'm definitely in. Type C is indeed the future :cool:
Post by: TriangleLab on Sun, 01 July 2018, 07:04:17
Looks tempting :)
Just wondering, is there a reason all PCBs out there are either hotswappable or Bluetooth, but never both? I can’t figure out why...
Sent from my iPhone using Tapatalk
Good question. Hotswappable means single layout. Bluetooth, especially long battery life Bluetooth, is a relatively new feature to keyboard PCBs. We added tons of layout options on the Bluetooth PCB to meet everyone's needs. As for the wired version, I decided to use the WKL layout becuase I like this layout a lot and there's no hot-swappable 60% WKL PCBs available on the market afaik.
Post by: TriangleLab on Sun, 01 July 2018, 07:08:32
Does the PCB have SMD LEDs? Or are those just holes for when you solder your own LEDs?
And wow, this will be USB Type C? You got me, I'm definitely in. Type C is indeed the future :cool:
You'll need to solder the 3528 SMD LEDs by yourself.
Yes, we had a lot of prototype PCBs for different layouts and they are all USB Type C!
Post by: anonymous on Sun, 01 July 2018, 07:10:37
Sent from my iPhone using Tapatalk
Post by: Petch on Mon, 02 July 2018, 20:01:22
Post by: tikkaman on Tue, 03 July 2018, 03:17:26
The plate supports split backspace and split right shift, right? Might be tempted if I can use it with a wired PCB that supports thoseYup, the plate supports both of those
Sent from my SM-G950U1 using Tapatalk
Post by: TriangleLab on Tue, 03 July 2018, 06:37:11
Is the bluetooth pcb compatible with other 60% cases?
There are AAA batteries behind the PCB. Other 60% cases may be compatible if there's enough room for the batteries or you can modify the case like this (https://imgur.com/zmPZlkB).
Post by: TriangleLab on Tue, 03 July 2018, 06:38:36
The plate supports split backspace and split right shift, right? Might be tempted if I can use it with a wired PCB that supports those
Yes, split BS and split right shift are all supported.
Post by: HamKenobi on Tue, 03 July 2018, 11:11:21
Will the invoice go out after the GB ends?
thanks!
Post by: tex_live_utility on Tue, 03 July 2018, 15:25:54
- Would it be possible to get an extra acrylic back plate, even if we order the brass?
- What other cases, if any, will the PCB support?
- Any typing test for sound?
It's too bad that the Fusion60 group buy hasn't started yet. I don't have the budget for both boards, and I would want to see the final price on the Fusion.
Post by: Poesjuh on Wed, 04 July 2018, 09:53:48
Sent from my iPad using Tapatalk
Post by: bball2 on Fri, 06 July 2018, 01:00:46
Post by: Gobluebro on Fri, 06 July 2018, 07:01:08
Post by: TriangleLab on Fri, 06 July 2018, 08:10:17
Signed up for a black one with brass weight and hotswap pcb.
Will the invoice go out after the GB ends?
thanks!
You will receive it shortly today or tomorrow
Post by: Poesjuh on Fri, 06 July 2018, 08:20:52
Sent from my iPhone using Tapatalk
Post by: TriangleLab on Fri, 06 July 2018, 08:22:55
Some questions:
- Would it be possible to get an extra acrylic back plate, even if we order the brass?
- What other cases, if any, will the PCB support?
- Any typing test for sound?
It's too bad that the Fusion60 group buy hasn't started yet. I don't have the budget for both boards, and I would want to see the final price on the Fusion.
1. Yes. PM me for details.
2. The compatibility of the PCB is the same with most 60% PCBs like GH60, Santan, DZ60, Zeal60, and so on.
3. No. I don't have a good speaker for recording sound.
I believe Fusion60 will be a good kit as well. However, TR60 is quite different from Fusion60 imo. Hope you can make the right decision by yourself.
Post by: TriangleLab on Fri, 06 July 2018, 08:26:35
I think I didn't fill in that shipping address part fully (it autofilled). Do you want me to resubmit?
No. Please me PM me with complete address.
Post by: TriangleLab on Fri, 06 July 2018, 08:27:51
No more finished build pics?
Here (https://imgur.com/a/pwlUSkQ) you go
Post by: lumpofunworth on Fri, 06 July 2018, 13:12:30
Ok so I see it in the new pictures that you posted, I can the the hole through the PC back plate but it is definitely covered by that plate. Will the final version gave a hole in the back plate for the wired PCB?
Sent from my iPhone using Tapatalk
Post by: Toilet on Fri, 06 July 2018, 15:21:27
Post by: Windeh on Sat, 07 July 2018, 00:11:49
Hmm just a random question but I didn’t notice a hole for USB input on the case, it appears to be covered by the back plate? Is that correct, it could be on the other side and just not pictured, but I saw the area for it inside the case but no exterior hole.
Ok so I see it in the new pictures that you posted, I can the the hole through the PC back plate but it is definitely covered by that plate. Will the final version gave a hole in the back plate for the wired PCB?
Sent from my iPhone using Tapatalk
My concern as well, will there be a special backplate for wired PCBs? Or will we have to create them ourselves (i.e. by dremel)?
Post by: bard on Sat, 07 July 2018, 01:02:37
Hmm just a random question but I didn’t notice a hole for USB input on the case, it appears to be covered by the back plate? Is that correct, it could be on the other side and just not pictured, but I saw the area for it inside the case but no exterior hole.
Ok so I see it in the new pictures that you posted, I can the the hole through the PC back plate but it is definitely covered by that plate. Will the final version gave a hole in the back plate for the wired PCB?
Sent from my iPhone using Tapatalk
ooh I have not spotted it, +1 for an answer,
Post by: TriangleLab on Sat, 07 July 2018, 01:32:32
Hmm just a random question but I didn’t notice a hole for USB input on the case, it appears to be covered by the back plate? Is that correct, it could be on the other side and just not pictured, but I saw the area for it inside the case but no exterior hole.
Ok so I see it in the new pictures that you posted, I can the the hole through the PC back plate but it is definitely covered by that plate. Will the final version gave a hole in the back plate for the wired PCB?
Sent from my iPhone using Tapatalk
My concern as well, will there be a special backplate for wired PCBs? Or will we have to create them ourselves (i.e. by dremel)?
ooh I have not spotted it, +1 for an answer,
The back plate in the photos doesn't have a cutout for USB port because there's no USB port on the prototype Bluetooth PCB. The back plates you receive will have cutouts for USB port.
Post by: meluvis on Sat, 07 July 2018, 02:36:27
Post by: joe405 on Sat, 07 July 2018, 04:11:40
Post by: suddenZenith on Sat, 07 July 2018, 09:26:51
Post by: nickaster1 on Sat, 07 July 2018, 09:50:58
Post by: Keebmeupscotty on Sat, 07 July 2018, 14:18:19
Post by: konstantin on Sat, 07 July 2018, 14:37:41
Does the web configurator for the Bluetooth PCB have layer tap functionality (layer when held, key when tapped; LT() in QMK), or does it support something like TMK which does?
Post by: Windeh on Sun, 08 July 2018, 04:23:53
Post by: janglad on Sun, 08 July 2018, 06:26:00
Post by: Poesjuh on Sun, 08 July 2018, 07:28:41
Sent from my iPhone using Tapatalk
Post by: TriangleLab on Sun, 08 July 2018, 08:33:45
As the price makes this attractive for newbies, would you consider adding an option for assembly for the Bluetooth pcb?
unfortunately, no
Post by: TriangleLab on Sun, 08 July 2018, 08:37:39
Does the hot-swap PCB come with with a keyswitch puller?
no
Post by: TriangleLab on Sun, 08 July 2018, 08:39:44
Anyway I can pay extra for the hotswap pcb to have another layout? Asking too late now but hoping it would work out
Could you elaborate? the hot-swappable PCB support only one layout.
Post by: TriangleLab on Sun, 08 July 2018, 08:44:50
In the OP you mentioned that the Bluetooth PCB only works with the acrylic back plate. Why is that? Reception issues or something else?
Does the web configurator for the Bluetooth PCB have layer tap functionality (layer when held, key when tapped; LT() in QMK), or does it support something like TMK which does?
1. All metal case will make the keyboard a faraday cage.
2. Yes, layer toggling is supported
Post by: TriangleLab on Sun, 08 July 2018, 08:46:05
Just paid for my invoice. :thumb: Curious, where will the GB ship from? Just want to get an idea on shipping time and cost.
Where will this be shipping from? Just to know if I will face import fees :)
will be shipping from Hongkong
Post by: konstantin on Sun, 08 July 2018, 11:19:15
1. All metal case will make the keyboard a faraday cage.I have an all-metal KBDfans 5° case and metal plate with a Bluetooth PCB and it works fine up to ~3 m. Have you tested this PCB with the metal back panel and can confirm that it doesn't work?
2. Yes, layer toggling is supportedCan you share a link to the web configurator? I would like to see its full capabilities before I order.
Also, what firmware is it based on?
Post by: coffeeshopcoder on Mon, 09 July 2018, 01:23:40
Post by: damagepoint on Mon, 09 July 2018, 03:05:20
Post by: Poesjuh on Mon, 09 July 2018, 03:12:18
Any chance at a different color? Would love this in a subtle gold or greenI'm assuming you not replying to this question means it's a no? (As I always tell people, no is also an answer :) )
Sent from my iPhone using Tapatalk
Post by: jakl on Mon, 09 July 2018, 03:30:38
2. Is the brass polished or grainy?
3. What is the range of the bluetooth PCB?
Also interested in the web configurator.
Post by: suddenZenith on Mon, 09 July 2018, 16:05:38
Post by: cldskt on Mon, 09 July 2018, 21:24:12
Post by: bball2 on Mon, 09 July 2018, 22:22:11
Holy **** great pricing! If you are planning to make one with normal layout (non HHKB), I'll be down. For now, I'll just keep tabs on the thread!
There is a normal (non hhkb) layout available.
Post by: kiwi99 on Mon, 09 July 2018, 22:35:44
Post by: cldskt on Tue, 10 July 2018, 00:21:47
Holy **** great pricing! If you are planning to make one with normal layout (non HHKB), I'll be down. For now, I'll just keep tabs on the thread!
There is a normal (non hhkb) layout available.
I’m obviously retarded. Thank you, not sure why I didn’t notice that in the OP.
Post by: bball2 on Tue, 10 July 2018, 00:29:43
I’m obviously retarded. Thank you, not sure why I didn’t notice that in the OP.
No worries! I jumped on the normal layout as well :thumb:
Post by: Yeoh on Tue, 10 July 2018, 02:10:22
Post by: Aerizu on Tue, 10 July 2018, 03:41:04
Was really on the fence with this one, but without a dedicated ANSI layout, I just couldnt do it.
You might want to re-read the post again.
EDIT:
Not sure if you meant the case or PCB, but I'm pretty sure the case does.
Post by: Koriko on Tue, 10 July 2018, 19:16:08
Was really on the fence with this one, but without a dedicated ANSI layout, I just couldnt do it.
You might want to re-read the post again.
EDIT:
Not sure if you meant the case or PCB, but I'm pretty sure the case does.
All the more confusing because both support both.
Post by: donkey on Thu, 12 July 2018, 22:20:24
TR-60 could turnout to be a classic so, hopefully, there will be another GB.
Re conflict between hot-swappable and flexible layout, I think the best path forward is to ship unsoldered Kailh sockets for areas with multiple layout options. Soldering Kailh socket seems pretty easy according to this video
Post by: bard on Tue, 17 July 2018, 13:29:28
GB ends on July 10th
Lead time: 75 days
does it mean that it should be shipped late Sep/beginning of Oct?
Post by: tex_live_utility on Tue, 17 July 2018, 22:21:39
Post by: asury on Wed, 18 July 2018, 03:20:09
Post by: joe405 on Thu, 19 July 2018, 21:45:27
Post by: wafflehigh on Thu, 19 July 2018, 22:58:18
Post by: Puddsy on Mon, 23 July 2018, 22:46:40
GB ends on July 10th
Lead time: 75 days
does it mean that it should be shipped late Sep/beginning of Oct?
if no delays
Post by: speaktobrett on Sun, 05 August 2018, 16:06:07
Just paid for my invoice. :thumb: Curious, where will the GB ship from? Just want to get an idea on shipping time and cost.Where will this be shipping from? Just to know if I will face import fees :)
will be shipping from Hongkong
Can you please reply to your private messages?
Post by: oldcat on Sun, 05 August 2018, 16:58:40
Post by: coffeeshopcoder on Sun, 05 August 2018, 21:47:56
Sent from my Nexus 6P using Tapatalk
Post by: Vadurr on Wed, 08 August 2018, 16:40:02
Post by: HamKenobi on Mon, 20 August 2018, 14:55:16
Post by: bard on Sun, 26 August 2018, 12:12:50
All we need is an update.
Post by: HamKenobi on Mon, 27 August 2018, 16:40:04
Post by: ArchDill on Mon, 27 August 2018, 17:39:42
Post by: bard on Thu, 30 August 2018, 03:35:43
Not sure how I missed this.. I really like this case. May have to look for one aftermarket.
hmm I have the iron grey version with black and brass back plates + 2x PCB (normal, not BT), interested?
Post by: jakl on Thu, 30 August 2018, 03:37:53
Sorry for the lack of updates in a period. The main reason is that I was assigned to an frontier provinces for work during these days. The network is so bad here that I could not login any foreign websites smoothly, but you can always get in contact with me through emails.
The progress of TR60 production is basically smooth. Some of the work took more time than I expected tho. The final delivery time could be delayed a little.
Aluminum housings are being CNCed in the factory.
Two features have been added to the wired version PCB.
1) ESC key surrounding RGB backlight. This is a popular feature originated from the Chinese keyboard community. With 4 WS2812 RGB LEDs around the ESC key, the backlight will be more even and brighter.
2) Optional middle USB port module/ daughterboard. In addition to the left side USB port option, middle USB port will also be possible with this module. The keyboard case design was slightly revised for supporting both USB port positions. Of course, Bluetooth PCB also has this feature.
The Bluetooth firmware developers just upgraded the firmware. I am working with them to test the new firmware and debug.
Pictures for the mentioned features: https://imgur.com/a/ozFtWar
Post by: bard on Thu, 30 August 2018, 04:11:15
I've asked TriangleLab only through GH.
Post by: bard on Thu, 06 September 2018, 03:41:08
- iron grey
- black and brass backplates
- 2x PCB (normal, not BT)
just pm me!
Post by: Aerizu on Sun, 16 September 2018, 07:28:50
You've mentioned previously that the wired PCB will come with a set of single-colored SMD LEDs and will be available in different color options.
Any information on which colors would be available?
Post by: Keebmeupscotty on Fri, 21 September 2018, 01:12:08
Hello, any update regarding this?
You've mentioned previously that the wired PCB will come with a set of single-colored SMD LEDs and will be available in different color options.
Any information on which colors would be available?
I am also curious about the LED choices. Also, it seems like the original estimated ship date is around the 25th of this month. Is there any chance of an update on how much further out before these are ready to ship? I want to make sure that I am paying attention to incoming emails at that time so I don't miss the shipping invoice.
Post by: coffeeshopcoder on Mon, 24 September 2018, 00:48:36
Post by: jakl on Fri, 28 September 2018, 01:43:49
First,about the wired-PCB LED color option.Of course, it still available.I had bought some kind of color SMD LEDs. They are Red,Pink,Golden,Blue,White,Green and Yellow.For users who have purchased a wired version,I will send a statistical form. Btw,I will send the photos of those LED light on the PCB to you tonight.
Second,about the production schedule,in the past Mid-Autumn festival holiday,I went to the factory located in Shenzhen city.According to their internal production schedule,our TR-60 case still need about 10 working days,because of the Chinese National Day holiday——it about 6~7 days——so it will take about 17~20 days.
Third,about the wired PCB,the wired PCB production goes well,and because of the personal SMD LED color option,everyone need solder the LED by yourself.
about the blue-tooth PCB and website, it is the biggest challenge in this project, the firmware engineer re-build more than 1/4 code of the firmware.The website, we had an functional prototype,and now only have Chinese version and not translate to English, and the new GUI is not finish yet.I hope I could give you or some others interesting this website an testing URL and account in 10 days later.
Post by: bard on Fri, 28 September 2018, 03:15:12
Post by: Aerizu on Fri, 28 September 2018, 03:54:46
Since I already started communicating with Victor, I decided to send him another email. Below is what he said about the wired and bluetooth PCB and estimated production finish. I will post the pictures later, when he sends them to me.
First,about the wired-PCB LED color option.Of course, it still available.I had bought some kind of color SMD LEDs. They are Red,Pink,Golden,Blue,White,Green and Yellow.For users who have purchased a wired version,I will send a statistical form. Btw,I will send the photos of those LED light on the PCB to you tonight.
Second,about the production schedule,in the past Mid-Autumn festival holiday,I went to the factory located in Shenzhen city.According to their internal production schedule,our TR-60 case still need about 10 working days,because of the Chinese National Day holiday——it about 6~7 days——so it will take about 17~20 days.
Third,about the wired PCB,the wired PCB production goes well,and because of the personal SMD LED color option,everyone need solder the LED by yourself.
about the blue-tooth PCB and website, it is the biggest challenge in this project, the firmware engineer re-build more than 1/4 code of the firmware.The website, we had an functional prototype,and now only have Chinese version and not translate to English, and the new GUI is not finish yet.I hope I could give you or some others interesting this website an testing URL and account in 10 days later.
Thanks man. You da real mvp. :thumb:
Post by: jakl on Thu, 04 October 2018, 01:27:07
LEDs are green, blue, pink(looks like purple), yellow, red and white, and according to the supplier said the pink is a little color deviation.
By the way, in the last email I said the color had golden and yellow, but supplier said the two kind of LEDs is very similar light in vision. So finally they are 6 color options.
Color----Green, Pink(Purple),Yellow(Golden), Blue, Red, White.
https://imgur.com/a/1zWELqP
Post by: Vadurr on Thu, 04 October 2018, 04:15:12
Here is Victor's reply about the LEDs, so you can think about which colors to choose. Below is the imgur link with images.
LEDs are green, blue, pink(looks like purple), yellow, red and white, and according to the supplier said the pink is a little color deviation.
By the way, in the last email I said the color had golden and yellow, but supplier said the two kind of LEDs is very similar light in vision. So finally they are 6 color options.
Color----Green, Pink(Purple),Yellow(Golden), Blue, Red, White.
https://imgur.com/a/1zWELqP
Thanks for the update! How will we confirm what colors we'd like? Also, is there an eta for when pcb's can be shipped?
Post by: jakl on Thu, 04 October 2018, 12:18:28
As far as I know Victor still has no access to foreign websites so the only way to communicate with him is through email.
Since I am just a middle man and have nothing to do with the GB it's best if you write him an email for more specific questions.
Post by: Aerizu on Thu, 18 October 2018, 09:15:04
As you can see in my previous update he said that he will send a form to those who ordered the wired PCB.
As far as I know Victor still has no access to foreign websites so the only way to communicate with him is through email.
Since I am just a middle man and have nothing to do with the GB it's best if you write him an email for more specific questions.
I tried to email him but he did not respond. Are there any new updates regarding this? o-o
Post by: coffeeshopcoder on Thu, 18 October 2018, 22:02:12
Post by: jakl on Sat, 20 October 2018, 07:41:23
I tried to email him but he did not respond. Are there any new updates regarding this? o-o
He usually needs a few days to answer so it might be a while. He sent me an email on Saturday and a second one on Monday but I haven't had the time to post it here yet. Below are the two emails and attached pictures.
The first batch of five cases had arrived my home and I found I make a very silly mistake.When used the standard GH60 pcb which used the Mini-USB plug.Between the plastic sheath on the Mini-USB cable and the keyboard case had interference.This is my fault,and I think adjust the size of the back plate will solve this problem.I will send you the new design map snapshot today or tomorrow.
I had adjust the back-plate size and render some pictures.The back-plate is resize from 15 millimeters to 17 millimeters.
You can see an Mini-USB Female Plug in the render picture.I had sent it to the factory and they will fix the wrong back-plate size as sooner as possible.
https://imgur.com/a/7parZSS (https://imgur.com/a/7parZSS)
I apologize for the late update but I was very busy during the week. It seems that the production is coming to an end and I don't think the backplate problem will add much additional time.
I will write another email to Victor tomorrow (in cca 30h) regarding the ETA on shipping date, so if any of you have any other questions regarding the GB drop me a message on GH and I will include it in the email.
Post by: Aerizu on Sat, 20 October 2018, 09:12:01
I tried to email him but he did not respond. Are there any new updates regarding this? o-o
He usually needs a few days to answer so it might be a while. He sent me an email on Saturday and a second one on Monday but I haven't had the time to post it here yet. Below are the two emails and attached pictures.
The first batch of five cases had arrived my home and I found I make a very silly mistake.When used the standard GH60 pcb which used the Mini-USB plug.Between the plastic sheath on the Mini-USB cable and the keyboard case had interference.This is my fault,and I think adjust the size of the back plate will solve this problem.I will send you the new design map snapshot today or tomorrow.
I had adjust the back-plate size and render some pictures.The back-plate is resize from 15 millimeters to 17 millimeters.
You can see an Mini-USB Female Plug in the render picture.I had sent it to the factory and they will fix the wrong back-plate size as sooner as possible.
https://imgur.com/a/7parZSS (https://imgur.com/a/7parZSS)
I apologize for the late update but I was very busy during the week. It seems that the production is coming to an end and I don't think the backplate problem will add much additional time.
I will write another email to Victor tomorrow (in cca 30h) regarding the ETA on shipping date, so if any of you have any other questions regarding the GB drop me a message on GH and I will include it in the email.
That's great to hear! So I assume these will be shipping in November? :D I'm getting excited already. XD
Post by: coffeeshopcoder on Sun, 21 October 2018, 12:55:06
Post by: jakl on Sat, 27 October 2018, 02:27:05
And today I will send the wired pcb LED color statistical form by google doc. About the shipping time,the order which is contain with wired PCB will shipping first.
Unfortunately he was pretty vague answering my questions so I hope he will send another mail, but it seems the production is coming to an end and the keyboards should be finished soon.
Post by: HamKenobi on Sun, 28 October 2018, 22:59:49
Post by: coffeeshopcoder on Thu, 08 November 2018, 01:28:35
Anyone else get any info shipping ?
Post by: jakl on Thu, 08 November 2018, 11:03:05
TriangleLab’s last activity was September 3rd? Should I be worried ?
Anyone else get any info shipping ?
I am the one communicating with him through email. A while back, he said that he got relocated to a remote location, which has poor access to foreign websites, so he isn't able to post to Geekhack.
I will drop him another email during the weekend, hopefully the final one.
It would be good if anyone of you who ordered the wired PCBs, can confirm or deny, that you received a form to choose the LED colors, so we can know everything is going according to plan.
Victor said those should be sent out on 28th of October.
If you are worried you can send him an email, but he takes a few days to answer.
Post by: Gobluebro on Thu, 08 November 2018, 12:42:41
Quote
It would be good if anyone of you who ordered the wired PCBs, can confirm or deny, that you received a form to choose the LED colors, so we can know everything is going according to plan.
Victor said those should be sent out on 28th of October.
I have received the form and have filled it out. He sent one email stating:
Quote
Hi Everyone,
As mentioned in the GB post on GH, the wired PCB (TR60w) support SINGLE color 3528 LEDs. Each PCB comes with one set of LEDs in one color. As the production is almost done, it's time for you to choose the color of LEDs.
For each wired PCB you ordered, you need to specify the color of LEDs you want.
If you don't fill in this form in time, the LEDs will be white by default.
Here is the URL on the google doc, please fill in this form, and I could buy all the LEDs from the supplier.
By the way, because of the personalization options, the wired PCB's LED should soldering by yourself.
He didn't include the google doc form originally and had a follow up email to include it. Along with this photo
(https://i.imgur.com/Yf9p7cG.png)
Post by: ArchDill on Thu, 08 November 2018, 12:57:40
Post by: jakl on Thu, 08 November 2018, 13:10:15
When are these going to be delivered? May try and keep an eye for after market.
I think someone was already selling his, even before they are finished. You can check the thread.
I have received the form and have filled it out. He sent one email stating:
He didn't include the google doc form originally and had a follow up email to include it. Along with this photo
Great, so I guess we really are getting close to the shipping date.
I will send one more email to Victor anyway just to check how it's going and report back here in the thread as per usual.
Post by: bard on Thu, 08 November 2018, 16:15:25
Post by: coffeeshopcoder on Thu, 08 November 2018, 23:55:22
Post by: suddenZenith on Wed, 14 November 2018, 15:18:15
Post by: Gobluebro on Wed, 14 November 2018, 19:17:18
...the hotswap pcb won't be compatible with cherry profile keycaps.
Isn't the capability issue only a problem when you have 3mm LEDs? You're talking about when the key cannot fully bottom out right?
Post by: Puddsy on Wed, 14 November 2018, 20:12:10
...the hotswap pcb won't be compatible with cherry profile keycaps.
Isn't the capability issue only a problem when you have 3mm LEDs? You're talking about when the key cannot fully bottom out right?
some people have said otherwise? idk i haven't seen anything definitive either way
Post by: Mcnos on Wed, 14 November 2018, 21:51:23
Post by: bard on Thu, 15 November 2018, 00:44:26
Uhh, I have an addiction and this looks cool. I'm up to grab one from someone lol
I still want to sell my spot ;)
Post by: Vadurr on Thu, 15 November 2018, 00:55:37
Post by: jakl on Thu, 15 November 2018, 04:23:29
I def never received an email of any kind from OP for my wired pcb's :confused:
I think the forms are closed now but you can probably send him an email about which color you want, don't know if he ordered the LEDs yet.
Worst case scenario, you will get white SMD LEDs, which you have to solder yourself anyway, so you can just buy the colors that you want.
Victor sent me the link to the online configurator for the Bluetooth PCB, but I don't think you can really access it unless you have some PCB connected.
You can check the Github page of the project however.
About the Bluetooth pcb web configuration. I add an ST’s stm32 USB IC on the board, and now the pcb could reprogramming the firmware through the USB-C. It is use google chrome browser new feature----Web USB interface.
https://18.191.250.47/webdfu/dfu-util/ (https://18.191.250.47/webdfu/dfu-util/)
I am still waiting for him to reply to my mail to get the estimated delivery date for the boards and will post the reply here when I get it.
Post by: jakl on Thu, 22 November 2018, 01:08:10
The Bluetooth PCB is USB + Bluetooth. The case‘s re-CNC and the re-color is almost finish, because of mistake of the backplate, and the case and the wired will finish first. Maybe this week or next week.
It looks like the cases are slowly getting ready for shipping so you should be expecting shipping invoices soon.
Post by: damagepoint on Thu, 22 November 2018, 02:24:48
Victor sent me an update today, so just leaving it here.
The Bluetooth PCB is USB + Bluetooth. The case‘s re-CNC and the re-color is almost finish, because of mistake of the backplate, and the case and the wired will finish first. Maybe this week or next week.
It looks like the cases are slowly getting ready for shipping so you should be expecting shipping invoices soon.
I would say the BT pcb being both usb and BT is an improvement. Does that mean it will utilize a rechargeable battery now?
Post by: jakl on Thu, 22 November 2018, 04:46:18
Victor sent me an update today, so just leaving it here.
The Bluetooth PCB is USB + Bluetooth. The case‘s re-CNC and the re-color is almost finish, because of mistake of the backplate, and the case and the wired will finish first. Maybe this week or next week.
It looks like the cases are slowly getting ready for shipping so you should be expecting shipping invoices soon.
I would say the BT pcb being both usb and BT is an improvement. Does that mean it will utilize a rechargeable battery now?
I don't think there will be any changes to the BT PCB apart from the added USB. The PCB will still use AAA batteries.
Post by: swagcameleon on Fri, 23 November 2018, 04:41:51
Post by: bard on Tue, 27 November 2018, 17:16:23
PM if someone is interested!
Post by: BerserkZz on Wed, 28 November 2018, 14:06:13
Post by: Aerizu on Mon, 03 December 2018, 03:35:03
Post by: egla on Mon, 03 December 2018, 09:38:43
Quote
I’m very sorry for the delay of the group buy, and the case is almost finish and still waiting some little things such paper package box, acrylic backplate and so on.
He didn‘t provide any proof though, so take it with a grain of salt.
Post by: jakl on Wed, 05 December 2018, 01:10:16
He said that the cases are finished and ready to be shipped to him, so hopefully they will start shipping out to the final buyers soon.
I also asked him some more questions to get a better understanding how much time will it take to send out all the cases since we are already 2 months past deadline.
Post by: egla on Wed, 05 December 2018, 01:58:40
Post by: Windeh on Wed, 05 December 2018, 05:10:29
Post by: jakl on Sat, 08 December 2018, 09:59:00
I also attached two pictures of the BT PCB, which appears to be in the 3rd test version, so hopefully it will be finished soon.
Victor did not give me any specific dates for which I asked, so I asked for them again. I hope that he will send me date estimates in the next few days. I actually don't know how much time it will take for the keyboards to be packaged and shipped but I don't believe we will receive any of them before Christmas.
Post by: Aerizu on Sat, 08 December 2018, 10:46:07
So I got another mail from Victor with the status of keyboard and PCB production. It is attached in the picture below, so apart from the BT PCB everything is ready or on the way.
I also attached two pictures of the BT PCB, which appears to be in the 3rd test version, so hopefully it will be finished soon.
Victor did not give me any specific dates for which I asked, so I asked for them again. I hope that he will send me date estimates in the next few days. I actually don't know how much time it will take for the keyboards to be packaged and shipped but I don't believe we will receive any of them before Christmas.
Thanks for sharing as always.
Post by: coffeeshopcoder on Mon, 10 December 2018, 12:44:10
So I got another mail from Victor with the status of keyboard and PCB production. It is attached in the picture below, so apart from the BT PCB everything is ready or on the way.
I also attached two pictures of the BT PCB, which appears to be in the 3rd test version, so hopefully it will be finished soon.
Victor did not give me any specific dates for which I asked, so I asked for them again. I hope that he will send me date estimates in the next few days. I actually don't know how much time it will take for the keyboards to be packaged and shipped but I don't believe we will receive any of them before Christmas.
many thanks for stepping up and keeping the updates flowing !
Post by: TriangleLab on Mon, 17 December 2018, 01:08:50
Some time ago, I was inconvenient to visit geekhack.org, and I apologize for this.Now I back to my home city, and it could be visit.
Go back to the topic of TR60，last week jakl helped me upload the check list to the community. @Jakl ,thank you very much.
I upload some new pictures to the imgur.
(https://i.imgur.com/hnRBWPP.jpg)
(https://i.imgur.com/tcNrKoQ.jpg)
(https://i.imgur.com/FnhSnOL.jpg)
Many many components.
(https://i.imgur.com/a3xMeSR.jpg)
(https://i.imgur.com/JmbopDL.jpg)
(https://i.imgur.com/aZFjAjx.jpg)
(https://i.imgur.com/xTaJFCz.jpg)
(https://i.imgur.com/I6WRpMq.jpg)
(https://i.imgur.com/0fDzKyi.jpg)
(https://i.imgur.com/pYVq2pa.jpg)
(https://i.imgur.com/D9rX0RP.jpg)
3528 LEDs for Wired PCB ↑
(https://i.imgur.com/GnVOnlb.jpg)
Case ↑
(https://i.imgur.com/hczgs61.jpg)
(https://i.imgur.com/948cBA2.jpg)
Sub-PCB
Post by: ChrisSwires on Mon, 17 December 2018, 05:21:53
Hello everyone,
Some time ago, I was inconvenient to visit geekhack.org, and I apologize for this.Now I back to my home city, and it could be visit.
Go back to the topic of TR60，last week jakl helped me upload the check list to the community. @Jakl ,thank you very much.
Thanks for the update, appreciated!
Post by: Windeh on Mon, 17 December 2018, 06:50:16
Post by: Aerizu on Mon, 17 December 2018, 07:48:13
Post by: TriangleLab on Wed, 19 December 2018, 04:32:40
1、The people who had only buy the wired PCB will send first. In optimism, their PCBs will be sent after about 3~5 days.I bought UV light and UV glue. The WS2812-4020 LED on the PCB upper surface need UV glue to reinforce. After reinforcement, the PCB will start sending to them.Today(2018-12-19),The UV light has arrived,and the UV glue's seller said the glue will be shipped to me on Thursday afternoon,so maybe 2018-12-22 I will get the glue and start to reinforce the WS2812 .Now I was QC the wired PCB, flashing the first QMK firmware into them and test them if they had any error and pick it out.
2、In the last week ,I said BT PCB is the third version, it is solder in the SMT factory, because some component is too small to solder by myself. I started to design the fourth version - for example, to adjust the position of the battery, the location of the FPC interface.
3、The case after my QC,the brass back-plate's size is a little wrong :(.You can see it in the photo,so I return them to factory about 5 days and maybe 2018-12-23 I will get the right size brass plate.And the Aluminum back-plate is all right.
(https://i.imgur.com/UXrE7ND.jpg)
(https://i.imgur.com/Ehu3Vg3.jpg)
(https://i.imgur.com/Nq1V6wt.jpg)
Post by: egla on Wed, 19 December 2018, 09:19:22
Post by: TriangleLab on Tue, 25 December 2018, 23:57:47
I received the UV glue,the UV glue gun,and I test it.The UV glue is the special glue for electronic products,PCBs and chips. It works very very. So the wired PCB is all ready to go. :D
(https://i.imgur.com/tmYDIpr.jpg)
(https://i.imgur.com/emg19tb.jpg)
(https://i.imgur.com/7Rx4Z79.jpg)
Post by: TriangleLab on Tue, 01 January 2019, 06:25:24
The ship work is start.So if you want to change the address please send me an email. My email address is skycham#outlook.com(please replace the # to @).And the first ship is wird PCBs order,case order, bluetooth PCB's test version 4 is finish and I think it will be the last test version and go into the final production process as soon as possible.
Post by: ihalatch on Tue, 01 January 2019, 09:23:22
Post by: mxgian99 on Tue, 01 January 2019, 09:26:26
Post by: Starston3 on Tue, 01 January 2019, 09:37:41
is the TR60 PCB added to QMK already?Looking at the QMK repo, not yet.
Post by: HamKenobi on Fri, 11 January 2019, 09:18:25
Post by: Gobluebro on Fri, 11 January 2019, 09:31:28
Are we supposed to send the money for shipping and calculate it on own own? Or are we going to get an email saying how much it will be??????????????????
I got this from the last email
Quote
The shipping fee detail list for everyone is being prepared, I will send it to you later.
Everybody order is different, and the weight of the package is different, so please give some time to sort the excel list.
Haven't heard anything yet but just gonna keep waiting.
Post by: jakl on Tue, 15 January 2019, 14:11:07
Sorry for my inactive in the geekhack. I was sink into the mail ocean, I have to through many many email to check everyone’s address, phone number and others details. It is a little terribly busy.
The shipp work is still processing. All the order which one without include Bluetooth PCB could ship before Chinese New Year holiday If every buyer pay the international shipping fee on time.
Most package I try to use DHL to ship them, and some package’s destination is nearly China such Singapore and Japan, I use the sf-express.com
The BT-PCB order I think should ship after Chinese New Year holiday.
After the third test version, the Bluetooth PCB had test 4th and 5th two versions. The factory made an stupid mistake, you can see it in the attachment.
Now it is in the 5th test version, I think it could work well, tomorrow I could get the it from the SMT factory. The factory engineer had sent me two photos. I also put them in the attachment.
I had upload the wired pcb’s document to the github, the URL is https://github.com/fox-lab/qmk_firmware/tree/master/keyboards/tr60w
Chinese New Year is on 5th of February, I don't know how many days around this date are the actual holidays.
The attachment included a few photos of the BT PCB, where the factory added the wrong solder pads for battery holders. Not much to see here, so didn't include them in the post.
Post by: Gobluebro on Tue, 15 January 2019, 14:44:30
Post by: HamKenobi on Fri, 18 January 2019, 15:21:00
The tao-bao think is so confusing to me. Did anybody use that method?
Post by: Chewwy on Fri, 18 January 2019, 18:18:40
Post by: Skryzskruzzle on Fri, 18 January 2019, 23:15:02
Did ya'll get the email?
The tao-bao think is so confusing to me. Did anybody use that method?
I'll probably be using that method, though I'm awaiting Victor's response (or changing of the shipping fee if I'm on the right page).
I'll update back if I successfully manage to pay for shipping via "method B".
Post by: Skryzskruzzle on Sat, 19 January 2019, 03:09:12
Did ya'll get the email?
The tao-bao think is so confusing to me. Did anybody use that method?
I'll probably be using that method, though I'm awaiting Victor's response (or changing of the shipping fee if I'm on the right page).
I'll update back if I successfully manage to pay for shipping via "method B".
Hi, I've just paid for my shipping via Method B, and this is roughly how it goes:
Taobao:
1. Click on the Taobao link that Victor emailed to you.
2. Add the item to cart by clicking "加入购物车". Make sure you're only buying "1" quantity.
[attach=1]
3. Click on "去购物车结算" to go to your shopping cart.
[attach=2]
4. Select the checkbox on the left of the item, and click on "结 算" to settle the order.
[attach=3]
5. Check the box "我会自行联系卖家寄送至海外收货地址" (I will contact seller for shipping to overseas address), and then click on "提交订单" to submit order to Trianglelab's Taobao storefront. Make sure to add the information Victor specifies in his email into the field next to "给卖家留言：" (comments to seller) .
[attach=4]
6. You should be redirected to an Alipay page. Do not confirm any order on the Alipay page yet, as Victor would need to change the amount payable to the correct price based on your shipping address. I sent him an email confirming that I just sent him an order via Taobao, and he responded with a picture showing my new shipping cost (130rmb).
Alipay
7. Go to the Alipay website (it was https://my.alipay.com/portal/i.htm for me).
8. Click on the "查看所有交易记录" button (view all transactions).
[attach=5]
9. You should see an item titled "TR60 Group Buy International Shipping Fee Special Links". Click on the button next to the date stating "付款" (payment). The other items in the drop down list are for refunding, viewing remarks, viewing detailed information, and deleting the transaction.
[attach=6]
10. Fill in credit card info, and then submit payment. I didn't take a picture of this page, but it should be a red button close to the bottom right.
Post by: bard on Mon, 21 January 2019, 02:54:21
I paid for my TR60 at 10 July 2018 where a lead time was 75 days (let say 3 months even due to some delays, bank holidays and so on) - so the stuff should be on my desk from Nov 2018.
PP's buyer protection expired at 6/7 of Jan 2019 due to some shady messages, lack of communication, I decided to create a case for a refund.
Victor answered to PP 4/5 days later and today I got the refund.
:-\
Post by: Vadurr on Mon, 21 January 2019, 03:45:12
Post by: Skryzskruzzle on Tue, 22 January 2019, 09:49:49
I'm quite happy with how it looks and feels, but I might try putting some foam inside the case since the Outemu Ice Greys I'm using sound really hollow.
Though, there was one glaring caveat when I was building my TR60 with a DZ60 PCB - the stab cutouts in the bottom of the 4mm thick plate only supports stabs with the wires south of the stab (there's a small channel the wire sits in), and the ANSI Enter key has the stab wire north of the stab, so I had to file out a bit of the bottom of the case to get the DZ60 to work. No biggie, but I had to spend a while troubleshooting it. If you ordered one of the PCBs that Trianglelabs was selling in this GB I wouldn't worry about it.
Otherwise I'm really enjoying the TR60.
Post by: jakl on Tue, 22 January 2019, 10:29:48
Received mine about 12 hours ago (am in Singapore so I'm not too surprised, but still), and just finished building/programming it.
I'm quite happy with how it looks and feels, but I might try putting some foam inside the case since the Outemu Ice Greys I'm using sound really hollow.
Though, there was one glaring caveat when I was building my TR60 with a DZ60 PCB - the stab cutouts in the bottom of the 4mm thick plate only supports stabs with the wires south of the stab (there's a small channel the wire sits in), and the ANSI Enter key has the stab wire north of the stab, so I had to file out a bit of the bottom of the case to get the DZ60 to work. No biggie, but I had to spend a while troubleshooting it. If you ordered one of the PCBs that Trianglelabs was selling in this GB I wouldn't worry about it.
Otherwise I'm really enjoying the TR60.
Would you mind taking some pictures from all perspectives, so we can have a closer look of the finished product?
Do you have any other cases to which you can compare the TR60?
Thanks
Post by: TriangleLab on Tue, 22 January 2019, 16:18:01
Why is it so complicated to pay a shipping invoice :( I've emailed them and have gotten no response.
emmm，
Maybe I missed you email,but I did not found any unread email in my inbox. If you have any problem, please email to me again.
Post by: TriangleLab on Tue, 22 January 2019, 16:20:12
Ok, I'm out of the GB. I'm sad and happy at the same time.
I paid for my TR60 at 10 July 2018 where a lead time was 75 days (let say 3 months even due to some delays, bank holidays and so on) - so the stuff should be on my desk from Nov 2018.
PP's buyer protection expired at 6/7 of Jan 2019 due to some shady messages, lack of communication, I decided to create a case for a refund.
Victor answered to PP 4/5 days later and today I got the refund.
:-\
:) If you still want it, your package is still ready for you. And if not, I just want to say sorry to you, sorry for my delay.
Post by: Vadurr on Tue, 22 January 2019, 17:21:29
Why is it so complicated to pay a shipping invoice :( I've emailed them and have gotten no response.
emmm，
Maybe I missed you email,but I did not found any unread email in my inbox. If you have any problem, please email to me again.
All is well now. Would you be able to provide a picture of the hotswap pcbs for us?
Post by: bard on Wed, 23 January 2019, 02:52:38
Ok, I'm out of the GB. I'm sad and happy at the same time.
I paid for my TR60 at 10 July 2018 where a lead time was 75 days (let say 3 months even due to some delays, bank holidays and so on) - so the stuff should be on my desk from Nov 2018.
PP's buyer protection expired at 6/7 of Jan 2019 due to some shady messages, lack of communication, I decided to create a case for a refund.
Victor answered to PP 4/5 days later and today I got the refund.
:-\
:) If you still want it, your package is still ready for you. And if not, I just want to say sorry to you, sorry for my delay.
No, thank you, I pass. If you want, feel free to sell my TR60 and pass this money to a charity organization.
Post by: Skryzskruzzle on Wed, 23 January 2019, 04:43:25
Received mine about 12 hours ago (am in Singapore so I'm not too surprised, but still), and just finished building/programming it.
I'm quite happy with how it looks and feels, but I might try putting some foam inside the case since the Outemu Ice Greys I'm using sound really hollow.
Though, there was one glaring caveat when I was building my TR60 with a DZ60 PCB - the stab cutouts in the bottom of the 4mm thick plate only supports stabs with the wires south of the stab (there's a small channel the wire sits in), and the ANSI Enter key has the stab wire north of the stab, so I had to file out a bit of the bottom of the case to get the DZ60 to work. No biggie, but I had to spend a while troubleshooting it. If you ordered one of the PCBs that Trianglelabs was selling in this GB I wouldn't worry about it.
Otherwise I'm really enjoying the TR60.
Would you mind taking some pictures from all perspectives, so we can have a closer look of the finished product?
Do you have any other cases to which you can compare the TR60?
Thanks
Here you go: https://imgur.com/a/XzTpSrB
Post by: jakl on Wed, 23 January 2019, 06:52:41
Here you go: https://imgur.com/a/XzTpSrB
Thanks, looks great
Post by: Gobluebro on Fri, 25 January 2019, 12:32:53
Quote
Update:
Wired PCB order & Case Only Order packages had gave to Post company.
I will send track code tomorrow through email for everyone.
Last Edit: Thu, 24 January 2019, 03:48:00 by TriangleLab
Post by: MeloDet on Sat, 26 January 2019, 23:15:07
Post by: Keebmeupscotty on Sun, 27 January 2019, 02:44:36
Okay, anyone know how to turn the led off?
Yes, if you are referring to the wired pcb. The command for the default layout is "fn + d" where fn is the key next to right shift. Here is a screenshot of the code where the default layout is in the qmk pull request. First set of values is base layer and second set is the result of holding fn and pressing any of the keys outlined on first layer.
[attachimg=1]
Post by: Sshimosawa on Sun, 27 January 2019, 04:21:35
Received mine about 12 hours ago (am in Singapore so I'm not too surprised, but still), and just finished building/programming it.
I'm quite happy with how it looks and feels, but I might try putting some foam inside the case since the Outemu Ice Greys I'm using sound really hollow.
Though, there was one glaring caveat when I was building my TR60 with a DZ60 PCB - the stab cutouts in the bottom of the 4mm thick plate only supports stabs with the wires south of the stab (there's a small channel the wire sits in), and the ANSI Enter key has the stab wire north of the stab, so I had to file out a bit of the bottom of the case to get the DZ60 to work. No biggie, but I had to spend a while troubleshooting it. If you ordered one of the PCBs that Trianglelabs was selling in this GB I wouldn't worry about it.
Otherwise I'm really enjoying the TR60.
Would you mind taking some pictures from all perspectives, so we can have a closer look of the finished product?
Do you have any other cases to which you can compare the TR60?
Thanks
Here you go: https://imgur.com/a/XzTpSrB
Big thanks for taking the time to snap photos. Case looks terrific. The anodizing looks righteous.
Post by: MeloDet on Sun, 27 January 2019, 11:55:09
Post by: Aerizu on Sun, 27 January 2019, 21:30:18
Post by: Keebmeupscotty on Sun, 27 January 2019, 21:56:14
Has anyone received their tracking details? I have already paid for shipping via PayPal but haven't received any tracking information.
I paid via Taobao last weekend and received my board Thursday the 24th, even though I made a silly mistake and had to cancel and reorder. He did say that the Taobao shipping would be the quickest option, so I'd just assume there are some extra steps in getting the money from his friend for the Paypal option. Board looks and feels great and the shipping he chose was very quick (I think it was only like 2 days from china to my doorstep)
Post by: damagepoint on Sun, 27 January 2019, 22:00:16
Post by: Gobluebro on Sun, 27 January 2019, 22:08:02
Has anyone received their tracking details? I have already paid for shipping via PayPal but haven't received any tracking information.
I emailed him today and got this back
Quote
Sorry for it. The post company has not give the final excel document. Maybe 20190128-0129 I could get it----package had gave to them 3 days ago. I guess maybe because of the weekend holiday they did not working. If I get the document I will sent the code to you as quickly as possible.
Post by: Aerizu on Mon, 28 January 2019, 04:38:51
Has anyone received their tracking details? I have already paid for shipping via PayPal but haven't received any tracking information.
I emailed him today and got this backQuoteSorry for it. The post company has not give the final excel document. Maybe 20190128-0129 I could get it----package had gave to them 3 days ago. I guess maybe because of the weekend holiday they did not working. If I get the document I will sent the code to you as quickly as possible.
Thanks for sharing man!
Post by: TriangleLab on Mon, 28 January 2019, 12:33:16
The PCB is Mickey 1.0 version, not 1.0 plus version,so it just have 2 AAA batteries.
(https://i.imgur.com/eXafsOH.jpg)
(https://i.imgur.com/tRw9d54.jpg)
(https://i.imgur.com/iW7o1rD.jpg)
(https://i.imgur.com/pbGlugK.jpg)
(https://i.imgur.com/N3XVqgY.jpg)
(https://i.imgur.com/wBADCHa.jpg)
(https://i.imgur.com/2ydcbly.jpg)
(https://i.imgur.com/BhkWpGT.jpg)
(https://i.imgur.com/8Am8dbo.jpg)
(https://i.imgur.com/ytdqTHp.jpg)
(https://i.imgur.com/JrWhDbJ.jpg)
(https://i.imgur.com/J1h1pJz.jpg)
(https://i.imgur.com/5Xqy1fF.jpg)
Post by: TriangleLab on Tue, 29 January 2019, 22:36:32
Post by: TriangleLab on Wed, 30 January 2019, 06:09:56
(https://i.imgur.com/GhRX64r.jpg)
(https://i.imgur.com/iEItCCr.jpg)
Post by: bball2 on Thu, 31 January 2019, 17:09:04
Post by: Vadurr on Fri, 01 February 2019, 18:43:47
Post by: Aerizu on Fri, 01 February 2019, 19:50:10
Unfortunately, the under side of the bottom part of the case got chipped but it's fine since it wont be seen anyway.
I will be posting pictures after I finish this build :thumb:
Post by: Chewwy on Fri, 01 February 2019, 20:50:12
Post by: coffeeshopcoder on Sat, 02 February 2019, 00:33:59
Post by: BreakWoodVN on Sat, 02 February 2019, 00:58:54
Very beautiful, I will consider to buy it
Post by: Aerizu on Sat, 02 February 2019, 03:21:30
Post by: TriangleLab on Sat, 02 February 2019, 06:02:23
Any word when the shipping invoices for the boards with BT pcb will go out ?The BT PCB still need some time.After the Chinese new year holiday, I will put it into the factory and make the new version test pcb, I still find some bugs need fix.
Post by: TriangleLab on Sat, 02 February 2019, 06:03:29
So how do we customize the keymap?https://github.com/fox-lab/qmk_firmware/tree/master/keyboards/tr60w
This link is the finally qmk document.
Post by: watchdog on Mon, 04 February 2019, 15:54:42
Post by: Gobluebro on Mon, 04 February 2019, 20:56:12
https://github.com/fox-lab/qmk_firmware/tree/master/keyboards/tr60w
This link is the finally qmk document.
Can you please submit a pull request to the QMK repo with this keyboard? I would like to use https://config.qmk.fm instead of writing the keymap by hand.
Post by: ghost990 on Fri, 08 February 2019, 13:36:28
Currently having this issue where for some reason the ` key, when plugged in, will be pressed and will continue to type out ``````````` until I hit another key. Then, the ` no longer works :(
I have no idea what to make of this issue, it happens with the standard firmware that came flashed on it. And remains after changing the keymapping around to match my HHKB ...
Below is my keymap, any help would be appreciated. I think I may have received a bad PCB.
Code: [Select]
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
KEYMAP(
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV,
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC,
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_BSPC,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, LT(1, KC_GRV),
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL),
KEYMAP(
RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, KC_LEFT, KC_RIGHT, KC_TRNS, KC_DEL,
KC_TRNS, KC_TRNS, KC_TRNS, BL_TOGG, BL_DEC, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_DOWN, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
};
Post by: mxgian99 on Fri, 08 February 2019, 14:06:25
as a workaround can you disable that spot in your keymap so it ignores the input?
Hey all, wasn't a part of the group buy but I received one of the wired boards from a trade on the mech market.
Currently having this issue where for some reason the ` key, when plugged in, will be pressed and will continue to type out ``````````` until I hit another key. Then, the ` no longer works :(
I have no idea what to make of this issue, it happens with the standard firmware that came flashed on it. And remains after changing the keymapping around to match my HHKB ...
Below is my keymap, any help would be appreciated. I think I may have received a bad PCB.Code: [Select]const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
KEYMAP(
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV,
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC,
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_BSPC,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, LT(1, KC_GRV),
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL),
KEYMAP(
RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, KC_LEFT, KC_RIGHT, KC_TRNS, KC_DEL,
KC_TRNS, KC_TRNS, KC_TRNS, BL_TOGG, BL_DEC, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_DOWN, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
};
Post by: ghost990 on Fri, 08 February 2019, 14:11:59
i think you have a short in the pcb for that spot. does it still happen if you take out the switch?
as a workaround can you disable that spot in your keymap so it ignores the input?
Yea I'm fairly certain it's a short as well with a little more digging. Removing the switch doesn't stop the issue. I'm going to look over the PCB but I'm not if it's something I can fix. I've already ordered a 1UP Hotswap HHKB PCB that has underglow presoldered on so I don't have to worry about it. Might actually put my Tokyo60 PCB in this case if the stabilizers are in the right direction. For the time being if I can't fix this.
Thanks for the tip!
Post by: watchdog on Sat, 09 February 2019, 01:32:54
Post by: Aerizu on Sat, 09 February 2019, 08:40:46
Is anyone else having this issue? For now as a workaround, I switched the mapping for both keys.
Post by: Keebmeupscotty on Sat, 09 February 2019, 09:07:31
I tried creating a simple keymap using the qmk branch but it seems that topmost left and right keys are inverted.Yup, I had the same issue. You can either swap those keys in the keymap you create, or (better), swap the keys in the c header file. I fixed it locally, but didn't have time then to see if it was possible to commit the change. Hopefully Triangle Lab can fix that and submit the pull request to the official qmk repo so that the simpler qmk configurator and qmk toolbox can be used for flashing.
Is anyone else having this issue? For now as a workaround, I switched the mapping for both keys.
Post by: Aerizu on Sat, 09 February 2019, 17:41:33
I tried creating a simple keymap using the qmk branch but it seems that topmost left and right keys are inverted.Yup, I had the same issue. You can either swap those keys in the keymap you create, or (better), swap the keys in the c header file. I fixed it locally, but didn't have time then to see if it was possible to commit the change. Hopefully Triangle Lab can fix that and submit the pull request to the official qmk repo so that the simpler qmk configurator and qmk toolbox can be used for flashing.
Is anyone else having this issue? For now as a workaround, I switched the mapping for both keys.
Ohh, I didn't thought of swapping the keys in the header file (looking at it now, it seems that the macro was the cause of the issue). Thanks for the info!
Post by: damagepoint on Sat, 09 February 2019, 18:59:48
Post by: frewtkeek on Mon, 11 February 2019, 22:49:09
Post by: Skryzskruzzle on Mon, 11 February 2019, 23:11:56
Anybody an idea which stabs I need for the hkkb version?
You'll need PCB-mount stabs - spacebar is 7.0u, while ANSI left shift, ANSI/ISO enter, long right shift, and 2u backspace require 2.0u stabs each.
Post by: frewtkeek on Sat, 16 February 2019, 15:39:18
Another question. Does anybody have some info on the led on the escape key? I see I can toggle it with fn+d, but I'm not sure what it's doing. Can I also change it through QMK?
Post by: HamKenobi on Sun, 17 February 2019, 00:34:31
PM here, Discord @ HamKenobi#1919 or reddit u/HamKenobi
Post by: TriangleLab on Sun, 17 February 2019, 05:40:08
Thanks for you quick reply and sorry for my slow one :)
Another question. Does anybody have some info on the led on the escape key? I see I can toggle it with fn+d, but I'm not sure what it's doing. Can I also change it through QMK?
The LED on the ESC key, it is standard ws2812, QMK & TMK is support this smart LED.The Pin of the LED is Atmega32u4's Pin36 ---- PF7(ADC7/TDI)
You can re-program it,turn on or turn off it.
Post by: frewtkeek on Sun, 17 February 2019, 06:06:53
Post by: jakl on Sun, 17 February 2019, 09:24:18
The BT PCB still need some time.After the Chinese new year holiday, I will put it into the factory and make the new version test pcb, I still find some bugs need fix.
It's been a while since you posted this and if I remember correctly the holidays are already over. Any progress on the BT PCB or you haven't sent it to the factory yet?
Do you have any estimates when will it be finished?
Also wondering if the web configurator for the BT PCB which you sent me is final or will there be any updates for this board particularly.
Post by: ye_cole on Mon, 18 February 2019, 15:41:39
Post by: jakl on Mon, 18 February 2019, 15:54:43
if anyone has an extra they want to get rid of, hmu!There are a few available on the mechmarket.
Post by: coffeeshopcoder on Mon, 18 February 2019, 22:53:35
Post by: TriangleLab on Thu, 21 February 2019, 03:26:24
I had made an mini board, and try to find the problem of the 2.4Ghz RF.The BT PCB still need some time.After the Chinese new year holiday, I will put it into the factory and make the new version test pcb, I still find some bugs need fix.
It's been a while since you posted this and if I remember correctly the holidays are already over. Any progress on the BT PCB or you haven't sent it to the factory yet?
Do you have any estimates when will it be finished?
Also wondering if the web configurator for the BT PCB which you sent me is final or will there be any updates for this board particularly.
(https://i.imgur.com/bnBF0qx.jpg)
(https://i.imgur.com/bnBF0qx.jpg)
Post by: Aerizu on Fri, 22 February 2019, 20:25:57
62g MX Zilents, Kat Alpha
Post by: BerserkZz on Sat, 23 February 2019, 00:09:44
Sharing some photos of my build with TR60.Where did you get those KAT. I haven't received any shipping notice yet.
62g MX Zilents, Kat Alpha
Post by: Aerizu on Sat, 23 February 2019, 01:44:44
Sharing some photos of my build with TR60.Where did you get those KAT. I haven't received any shipping notice yet.
62g MX Zilents, Kat Alpha
Bought them from a GB in zFrontier. They started shipping them out in January.
Post by: BerserkZz on Sat, 23 February 2019, 01:46:03
Do you live in China?Sharing some photos of my build with TR60.Where did you get those KAT. I haven't received any shipping notice yet.
62g MX Zilents, Kat Alpha
Bought them from a GB in zFrontier. They started shipping them out in January.
Post by: TriangleLab on Sat, 23 February 2019, 01:52:11
Sharing some photos of my build with TR60.
62g MX Zilents, Kat Alpha
Thank you for your photos. :)
Post by: TriangleLab on Sat, 23 February 2019, 01:54:30
I will solder the board quickly and run the test of it.
(https://i.imgur.com/csIcMJG.jpg)
Post by: wixxzblu on Sat, 23 February 2019, 08:05:25
Post by: TriangleLab on Sat, 02 March 2019, 01:50:26
(https://i.imgur.com/3UQCSMQ.jpg)
Post by: jakl on Sat, 02 March 2019, 04:22:12
New PCB versionShow Image(https://i.imgur.com/3UQCSMQ.jpg)
Is this the final version then or do you still need to test it and see if there are any problems with it?
Post by: gerold on Sat, 02 March 2019, 04:29:54
Post by: Koriko on Sun, 03 March 2019, 17:45:04
Hey guys, will there be another run soon? :-*
Probably not as we're still waiting on our orders with the Bluetooth PCB in them
Post by: coffeeshopcoder on Thu, 07 March 2019, 13:47:21
Post by: TriangleLab on Sun, 10 March 2019, 03:15:49
Post by: TriangleLab on Tue, 12 March 2019, 01:18:36
Post by: Wojciech on Fri, 15 March 2019, 16:58:45
Is theTR60 integrated plate Alps compatibile with my own Alps PCB?
Post by: senter on Fri, 15 March 2019, 18:28:21
Post by: bard on Tue, 19 March 2019, 09:12:37
Hi All,I started to buy component materials for final production.I will do my best to complete the final steps as soon as possible.
TriangleLab can you check DMs?
Post by: fcoury on Tue, 19 March 2019, 09:13:25
Hi All,I started to buy component materials for final production.I will do my best to complete the final steps as soon as possible.
Awesome, any progress after this?
Post by: TriangleLab on Tue, 19 March 2019, 10:07:15
Hi All,I started to buy component materials for final production.I will do my best to complete the final steps as soon as possible.
Awesome, any progress after this?
The materials was arrived.
https://imgur.com/gallery/5u63VxS
The PCB is being produced at the factory.
Post by: fcoury on Tue, 19 March 2019, 10:14:08
The materials was arrived.
https://imgur.com/gallery/5u63VxS
The PCB is being produced at the factory.
Super hyped about this! Thanks!
Post by: TriangleLab on Thu, 21 March 2019, 03:45:13
Once the PCB is ready, I will package the pack and ask all people to pay the shipping fee and then I will send them as fast as possible.The materials was arrived.
https://imgur.com/gallery/5u63VxS
The PCB is being produced at the factory.
Super hyped about this! Thanks!
Post by: TriangleLab on Sun, 24 March 2019, 01:29:12
Dongle's PCBA
Post by: Jae-3soteric on Thu, 28 March 2019, 03:40:35
Show Image(https://i.imgur.com/QsutzYr.jpg)
Dongle's PCBA
Does this mean the BLE version will be shipping soon?
Sent from my iPhone using Tapatalk Pro
Post by: TriangleLab on Sat, 30 March 2019, 10:57:12
Yes,the PCBA for BLE is in the SMT factory, they are white color FR4 PCB.Show Image(https://i.imgur.com/QsutzYr.jpg)
Dongle's PCBA
Does this mean the BLE version will be shipping soon?
Sent from my iPhone using Tapatalk Pro
Post by: coffeeshopcoder on Mon, 08 April 2019, 00:53:00
Post by: TriangleLab on Tue, 09 April 2019, 07:29:43
2、USB dongle's case arrived,and I will upload some photos lately.
Post by: TriangleLab on Wed, 10 April 2019, 06:47:58
1、PCBA SMT work will finish about at 2019-04-13;
2、USB dongle's case arrived,and I will upload some photos lately.
Dongle's Case,Three Color
(https://i.imgur.com/eGoRl5Q.jpg)
Post by: jakl on Wed, 10 April 2019, 06:57:39
1、PCBA SMT work will finish about at 2019-04-13;
2、USB dongle's case arrived,and I will upload some photos lately.
If this is the finish date, do you have any estimates when you will be shipping the boards to us?
Also wondering if there is any additional progress with the web configurator.
Post by: TriangleLab on Sat, 13 April 2019, 21:39:48
I will start the shipping work immediately after I get the the PCBA.1、PCBA SMT work will finish about at 2019-04-13;
2、USB dongle's case arrived,and I will upload some photos lately.
If this is the finish date, do you have any estimates when you will be shipping the boards to us?
Also wondering if there is any additional progress with the web configurator.
Post by: TriangleLab on Wed, 17 April 2019, 11:45:08
I have received the PCB，I will start preparing for the delivery work during the day tomorrow.
I will send an email with you to confirm the order information and shipping address.
If you need to update your shipping address, please let me know.
Some people order the USB dongle,the dongle case had three color, please tell me which color you want to receive.
(https://i.imgur.com/eGoRl5Q.jpg)
Some Photo
(https://i.imgur.com/669hXNi.jpg)
(https://i.imgur.com/OciUmIv.jpg)
(https://i.imgur.com/XqZz2GQ.jpg)
Post by: coffeeshopcoder on Wed, 17 April 2019, 18:42:53
Post by: Koriko on Mon, 22 April 2019, 02:23:13
Never mind, I was able to get mine swapped out before shipping.
Post by: jakl on Tue, 30 April 2019, 11:01:32
Hi,
I have received the PCB，I will start preparing for the delivery work during the day tomorrow.
I will send an email with you to confirm the order information and shipping address.
If you need to update your shipping address, please let me know.
So how is the packing progressing? Can we expect the boards to be shipped soon?
Post by: fcoury on Thu, 02 May 2019, 16:49:57
Post by: jakl on Fri, 03 May 2019, 03:04:02
Post by: TriangleLab on Fri, 03 May 2019, 11:44:41
Hey there, any news on the shipping? Thanks!I will send the shipping fee invoice at 2019-05-05 (GMT +8) to you，I had gave the package weight list to the post company, but I don't know why, they are not send me the fee list in time, maybe the Labor Day? May 5th is a working day and I could get it.
Post by: fcoury on Fri, 03 May 2019, 12:11:15
Hey there, any news on the shipping? Thanks!I will send the shipping fee invoice at 2019-05-05 (GMT +8) to you，I had gave the package weight list to the post company, but I don't know why, they are not send me the fee list in time, maybe the Labor Day? May 5th is a working day and I could get it.
That is awesome, thank you!
Post by: BerserkZz on Sun, 05 May 2019, 18:31:58
Post by: TriangleLab on Sun, 05 May 2019, 21:14:15
Any instructions for ble version's programming?I will write a instructions for use.
Post by: Jae-3soteric on Mon, 06 May 2019, 11:26:15
Sent from my iPhone using Tapatalk Pro
Post by: coffeeshopcoder on Mon, 06 May 2019, 13:11:20
Post by: TriangleLab on Wed, 08 May 2019, 03:24:54
Shipping invoice paid !Thank you. I will send you the track code after I get them from the post company.
Post by: TriangleLab on Wed, 08 May 2019, 09:13:25
(https://i.imgur.com/xwrQM9t.jpg)
(https://i.imgur.com/cgOMVqi.jpg)
Some photos from Chinese TR60 buyer, the color is mid-night blue.
Post by: damagepoint on Thu, 16 May 2019, 04:41:15
Post by: Jae-3soteric on Thu, 16 May 2019, 04:49:55
Paid shipping 12 days ago, anyone get a tracking?
No tracking yet but also a couple of weeks since I paid shipping
Sent from my iPhone using Tapatalk Pro
Post by: TriangleLab on Fri, 17 May 2019, 10:11:06
Paid shipping 12 days ago, anyone get a tracking?Sorry, some little problem for my body.
I could update the track code this Sunday.
Post by: TriangleLab on Mon, 20 May 2019, 05:56:30
Post by: fcoury on Mon, 20 May 2019, 17:11:06
Shipping invoice paid !Thank you. I will send you the track code after I get them from the post company.
Still no tracking, paid mine May 5th.
Post by: Kokaloo on Tue, 21 May 2019, 10:31:31
Post by: TriangleLab on Tue, 21 May 2019, 21:53:00
Your code had update on the paypal. And I had send a pm to you with the code.Shipping invoice paid !Thank you. I will send you the track code after I get them from the post company.
Still no tracking, paid mine May 5th.
Post by: fcoury on Tue, 21 May 2019, 21:55:00
Post by: TriangleLab on Fri, 24 May 2019, 20:41:53
Are there any extra PCBs by chance? :DYes, I still have some extra PCB, both wired PCB and BLE PCB, about 3~5 pcs
Post by: BerserkZz on Sun, 26 May 2019, 15:13:07
Post by: lukelex on Sun, 26 May 2019, 15:22:19
Sent from my SM-G975F using Tapatalk
Post by: wixxzblu on Sun, 26 May 2019, 15:23:22
I got my board a few days ago but I have no ideas what the extra parts, that came in the box, are for and there are no instructions to be found. Does anyone have a clue?
Sent from my SM-G975F using Tapatalk
can you show us a pic of the extra parts ?
Post by: TriangleLab on Tue, 28 May 2019, 21:02:25
Mine is arriving tmr. Still no instruction for use?I am writing an English version of the manual, which will be passed tonight.
Post by: BerserkZz on Tue, 28 May 2019, 21:50:52
Post by: BerserkZz on Tue, 28 May 2019, 21:51:37
Actually, if you don't mind, can you send me the Chinese version? I can read Chinese.Actually, if you don't mind, can you send me the Chinese version? I can read Chinese.
Post by: TriangleLab on Wed, 29 May 2019, 22:45:09
Please pm me your email address and I send the Chinese Version to you.Actually, if you don't mind, can you send me the Chinese version? I can read Chinese.Actually, if you don't mind, can you send me the Chinese version? I can read Chinese.
Post by: coffeeshopcoder on Thu, 30 May 2019, 01:40:12
Post by: lukelex on Thu, 30 May 2019, 01:49:39
Sent from my SM-G975F using Tapatalk
Post by: Aerizu on Thu, 30 May 2019, 05:51:20
What do you mean by extra plates? This has integrated plate on the case.
Sent from my SM-G975F using Tapatalk
He probably meant the back plates (the side of the usb port).
Different back plates were offered (alu, acrylic and brass)
Post by: lukelex on Thu, 30 May 2019, 07:45:21
Sent from my SM-G975F using Tapatalk
Post by: coffeeshopcoder on Thu, 30 May 2019, 17:49:23
Anyone who ordered them got them ? Or was it abandoned somewhere along the way
Post by: Aerizu on Thu, 30 May 2019, 18:58:40
Yes. I meant the acrylic/ metal strip with the cut out for the USB port on the back.
Anyone who ordered them got them ? Or was it abandoned somewhere along the way
I received two: aluminum with matching case color, and an acrylic one.
Post by: coffeeshopcoder on Fri, 31 May 2019, 13:26:42
Post by: vi0till on Sun, 02 June 2019, 03:45:31
Post by: TriangleLab on Mon, 03 June 2019, 00:18:25
User manual
BLE User manual
https://github.com/TriangleLab/TR60/blob/master/TR%2060%20%E5%BC%80%E7%AE%B1%E9%A1%BB%E7%9F%A5%20TR60%20Instruction.md
TR60 Github
https://github.com/TriangleLab/TR60
Post by: coffeeshopcoder on Mon, 03 June 2019, 00:35:55
Post by: nilpt on Mon, 03 June 2019, 01:11:55
Reference: https://geekhack.org/index.php?topic=51069.0 (https://geekhack.org/index.php?topic=51069.0)
Post by: lukelex on Fri, 21 June 2019, 09:01:11
Also why is it using such a poor firmware? It doesn't even have Tap&Hold?
Post by: lukelex on Fri, 21 June 2019, 09:56:47
Post by: TriangleLab on Mon, 24 June 2019, 12:09:01
LOL Managed to flash it but now the PCB is bricked...GJ y'allSorry for late to reply.Please pm me or write the detail at here.
I will help you.
Don't worry, the pcb could fix not very hard.
Post by: coffeeshopcoder on Mon, 15 July 2019, 19:17:30
Post by: Aerizu on Mon, 15 July 2019, 19:40:52
anyone built this yet ?
I posted my build if you're interested. Just backread a few pages.
Post by: lukelex on Tue, 16 July 2019, 03:37:45
anyone built this yet ?http://imgur.com/a/UbkNIy4
Although I'm not using the pcb that came with it.
Sent from my SM-G975F using Tapatalk
Post by: coffeeshopcoder on Tue, 16 July 2019, 12:15:21
I was hoping to find someone who setup the mickey board pcb ... the instructions look frightening
Post by: lukelex on Tue, 16 July 2019, 12:19:55
Nice !I tried but gave up. The firmware is too primitive when you're used to qmk/tmk.
I was hoping to find someone who setup the mickey board pcb ... the instructions look frightening
Sent from my SM-G975F using Tapatalk
Post by: ddnomad on Sat, 12 October 2019, 16:36:19
Anybody know whether there are any QMK layouts for this PCB? Tried to search through official QMK GitHub repo with no success.
Post by: frewtkeek on Sat, 12 October 2019, 16:41:05
Post by: ddnomad on Sat, 12 October 2019, 16:51:41
Try this: https://github.com/fox-lab/qmk_firmware/tree/master/keyboards/tr60w
Oh, tyvm! That has the header file that should allow me to get started. Wondering why it's not merged into upstream though :(
Post by: frewtkeek on Sat, 12 October 2019, 16:53:07
Post by: ddnomad on Sat, 12 October 2019, 16:59:21
I guess nobody ever submitted a pr for that. If you clean up the code (there's an issue with esc and backspace being swapped), they might accept it.
Yeahhh, already merged into my own fork, though I'm definitely low on day offs to get that sorted anytime soon. Considering I have about 0 understanding or the whole QMK thing and how that works :D Guess this is an excellent opportunity to get my hands dirty though.
Big thanks from me for sharing that fork! Have an excellent morning/day/evening!
Post by: nathanchere on Thu, 20 February 2020, 02:28:21
Is there any way to buy the USB dongle still?