Author Topic: [GB] DGL TKL keyboard | Closed (Read 61287 times)

chanmin kang · « **Reply #50 on:** Mon, 01 June 2020, 12:22:51 »

The order period ended without any problems. It's all over until just a little grace period.

If you have not paid yet, you will be given a period until June 3.

The payment must be completed before June 4th will be processed normally. Failure to complete before June 4th will result in the cancellation of the invoice and cancellation of the order.

We are organizing the completed order. We will update the new content on June 4th! Please wait!

Doip · « **Reply #51 on:** Mon, 01 June 2020, 17:45:31 »

Is there a way to see my form after submission?

notverriegod · « **Reply #52 on:** Mon, 01 June 2020, 18:01:20 »

Can we get a viewable spreadsheet so we can see what our submissions are?

chanmin kang · « **Reply #53 on:** Mon, 01 June 2020, 23:03:18 »

Quote from: Doip on Mon, 01 June 2020, 17:45:31

Is there a way to see my form after submission?

Please send DM or email!

JDMFanatic · « **Reply #54 on:** Wed, 03 June 2020, 17:04:04 »

I have sent PMs and Emails, but my invoice still doesnt have the right amount on it.

cosign_input · « **Reply #55 on:** Wed, 03 June 2020, 21:00:08 »

Will there be updates on the production process on your site in English or through a newsletter?

chanmin kang · « **Reply #56 on:** Wed, 03 June 2020, 22:50:13 »

Quote from: JDMFanatic on Wed, 03 June 2020, 17:04:04

I have sent PMs and Emails, but my invoice still doesnt have the right amount on it.

Would you please send an email to kkingkkongworks@gmail.com
I think something was wrong.

chanmin kang · « **Reply #57 on:** Wed, 03 June 2020, 22:51:14 »

Quote from: cosign_input on Wed, 03 June 2020, 21:00:08

Will there be updates on the production process on your site in English or through a newsletter?

Yes, the update will be sent to the email you entered when placing your order. Of course, you can also see it in GB threads.

chanmin kang · « **Reply #58 on:** Thu, 18 June 2020, 12:17:20 »

This image is a rendering of the FR4 plate.
We are pleased to announce that FR4 plates are being produced.

Sorry for the delayed update via email. There is a problem with the address book, so I will send it to you soon.

dangboy · « **Reply #59 on:** Thu, 18 June 2020, 12:18:47 »

never been turned on by a plate before

Steelwind · « **Reply #60 on:** Fri, 19 June 2020, 16:17:19 »

Good evening chanmin kang,

Could you please check your PM about my request please ? thank you in advance.

chanmin kang · « **Reply #61 on:** Wed, 01 July 2020, 10:32:00 »

FR4 plate has arrived. Made with black plates, such as rendering. Here is a picture.

dangboy · « **Reply #62 on:** Wed, 01 July 2020, 10:33:59 »

notverriegod · « **Reply #63 on:** Fri, 03 July 2020, 09:54:53 »

Hey was wondering if you got my reply for changing the springs and shipping address?

Steelwind · « **Reply #64 on:** Fri, 03 July 2020, 12:27:15 »

Hello chanmin kang, could you check my message as well please ? thanks in advance and have a great day and weekend.

chanmin kang · « **Reply #65 on:** Thu, 23 July 2020, 13:53:38 »

The rear connector part has been machined.
As you know, DGL takes a long time to manufacture because there are many parts.

We decided to make more frequent updates. I will update it if there are any simple changes.

chanmin kang · « **Reply #66 on:** Tue, 28 July 2020, 01:19:22 »

We will inform you about the progress of production so far.

Bottom Case : 30%

Top Case : 50%

Plate : 50%

Point plate (Weight) : 59%

Front Diffuser : 20%

Back Connect Part : 100%

PCB : 100%

In the Bottom case, 10 units have been completed in advance, and the above progress is the rest.

So far, about 15 have been produced and will be shipped in early October.

cosign_input · « **Reply #67 on:** Wed, 29 July 2020, 15:40:20 »

Can we get photos of the PCB?

chanmin kang · « **Reply #68 on:** Tue, 04 August 2020, 22:57:02 »

The DGL Top Case is scheduled to be completed this week.

chanmin kang · « **Reply #69 on:** Sat, 08 August 2020, 13:08:43 »

DGL TKL's WKL Top Case has been completed.

notverriegod · « **Reply #70 on:** Sat, 08 August 2020, 18:40:10 »

do we know if we're still on track for an eta of October?

chanmin kang · « **Reply #71 on:** Sun, 09 August 2020, 22:52:32 »

uberkiwi · « **Reply #72 on:** Mon, 10 August 2020, 12:46:17 »

looking good!

chanmin kang · « **Reply #73 on:** Thu, 13 August 2020, 20:42:08 »

This is a photo of the top case processed. It was filmed at the factory yesterday.

dangboy · « **Reply #74 on:** Wed, 19 August 2020, 22:03:31 »

Quote from: chanmin kang on Sun, 09 August 2020, 22:52:32

Show Image

Oh wow. What board is the one up front here? That doesn't look like a DGL TKL. Those bezels are thiiiiiccccccc, I love it.

Tree_ · « **Reply #75 on:** Wed, 19 August 2020, 22:50:25 »

Quote from: dangboy on Wed, 19 August 2020, 22:03:31

Quote from: chanmin kang on Sun, 09 August 2020, 22:52:32
Show Image

Oh wow. What board is the one up front here? That doesn't look like a DGL TKL. Those bezels are thiiiiiccccccc, I love it.

From forum posts on their site, I think it's called 4K87 and they ran it last year.

Curin Derwin · « **Reply #76 on:** Fri, 21 August 2020, 15:30:34 »

Hi there, when can I purchase ALPs plates? Can I modify a CherryMX plate order to an ALPs order? Thank you!

chanmin kang · « **Reply #77 on:** Tue, 01 September 2020, 08:18:22 »

we are currently in the sandblasting process.

dangboy · « **Reply #78 on:** Tue, 01 September 2020, 08:20:14 »

chanmin kang · « **Reply #79 on:** Tue, 08 September 2020, 04:44:45 »

Please note that most of the process has gone into finishing.
When the production is finished now, Sandblast and anodizing/cerakoat remain.

dangboy · « **Reply #80 on:** Tue, 22 September 2020, 18:31:47 »

About a week until the original projected finish line, but based on the 660 group buy I'm assuming we can expect some delays.

Any updates?

chanmin kang · « **Reply #81 on:** Sun, 27 September 2020, 13:32:45 »

lovidore · « **Reply #82 on:** Mon, 28 September 2020, 03:53:32 »

So Chanmin,

Are you ever going to respond to the 660 GB thread or are you going to continue posting pictures with no context?

Steelwind · « **Reply #83 on:** Tue, 29 September 2020, 13:49:57 »

seems like we'll never get it before 2021 eh ?

Steelwind · « **Reply #84 on:** Sun, 04 October 2020, 13:31:19 »

asked for a refund. Don't want to gamble my hard earned money to a person that doesn't even answer any pm from here or his other gb, the 660.

chanmin kang · « **Reply #85 on:** Mon, 12 October 2020, 02:43:49 »

This is almost done now.

Please check your email.

Curin Derwin · « **Reply #86 on:** Sat, 24 October 2020, 23:21:30 »

I want to make mention of something here: it does not sit well that the springs that were sent early to buyers for "early review" were placed in the shipment line for tracking on the invoice. It also does not sit well that the tracking number of my package does not match the tracking number placed inside of the PayPal invoice. I think it's dishonest to mark the invoice shipped days after payment for a minor item in a larger project. It also requires an explanation to case investigators should someone seek to file a dispute claim.

I petition that marking early shipments of minor items on a major order on PayPal invoices is, moving forward, a flag for review. This is not buyer-centric and highly sus'.

Steelwind · « **Reply #87 on:** Tue, 10 November 2020, 11:37:16 »

I just received my refund from paypal, I absolutely recommend you all do the same so you won't have to wait 1 or 2 years before receiving either the keyboard or the refund tbh. I don't like how he handled it tbh, too much red flag from this GB and his other gb.

hottrout · « **Reply #88 on:** Tue, 10 November 2020, 14:30:56 »

Would there still be a way to buy one of these when they are complete? I really wanted one to remake a DEC VT100 keyboard replica.

Tree_ · « **Reply #89 on:** Tue, 10 November 2020, 15:39:32 »

Quote from: hottrout on Tue, 10 November 2020, 14:30:56

Would there still be a way to buy one of these when they are complete? I really wanted one to remake a DEC VT100 keyboard replica.

Have you been reading this thread or the thread for his other incomplete GB (Kkingkkong 660)?

Most buyers have either submitted a Paypal dispute and successfully received a refund without any reply from the GB runner or are holding out for updates until as close to the dispute deadline as possible. Chanmin has vanished: Doesn't reply here, doesn't reply on Discord, doesn't reply to emails - I'd be surprised if either of his boards get shipped.

hottrout · « **Reply #90 on:** Wed, 11 November 2020, 01:38:15 »

I had been reading but I did not realize that there was zero communication. Seems very odd given that he appears to have manufactured a lot of parts at the very least. I hope he reappears at some point.

Andriko · « **Reply #91 on:** Tue, 24 November 2020, 23:17:54 »

Quote from: chanmin kang on Mon, 12 October 2020, 02:43:49

This is almost done now.

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Please check your email.

The discord link I received in my email expired before I could join, after emailing back and pming on geekhack I received no response, please respond to my post, via email, or geekhack pm or I will request a refund from PayPal

Noveltty · « **Reply #92 on:** Mon, 07 December 2020, 10:21:18 »

chanmin kang start new GB on Korean channel

cosign_input · « **Reply #93 on:** Mon, 07 December 2020, 13:11:31 »

yikes

dangboy · « **Reply #94 on:** Mon, 07 December 2020, 13:14:32 »

Still bummed this turned out to be a scam. Was really looking forward to it. Someone ~~steal~~ borrow this design without the prolapse usb port and take my money again plz

kajahtaa · « **Reply #95 on:** Sat, 19 December 2020, 16:18:38 »

was this the person as lsoelxi?

Andriko · « **Reply #96 on:** Thu, 07 January 2021, 18:16:04 »

Quote from: dangboy on Mon, 07 December 2020, 13:14:32

Still bummed this turned out to be a scam. Was really looking forward to it. Someone ~~steal~~ borrow this design without the prolapse usb port and take my money again plz

Did you get your money back?

dangboy · « **Reply #97 on:** Thu, 07 January 2021, 18:38:57 »

Quote from: Andriko on Thu, 07 January 2021, 18:16:04

Quote from: dangboy on Mon, 07 December 2020, 13:14:32
Still bummed this turned out to be a scam. Was really looking forward to it. Someone ~~steal~~ borrow this design without the prolapse usb port and take my money again plz

Did you get your money back?

Every last penny. hopefully everyone disputed before it was too late

News:

Author Topic: [GB] DGL TKL keyboard | Closed (Read 61287 times)