[GB] Dolphin and EM7 Raffle - All boards have shipped! So long, everyone!

[_BMW_M3_]

Update:

Machining scheduled to be finished 5/27.

Anodizing should be completed 6/15.

[Tally810]

Update:

Machining scheduled to be finished 5/27.

Anodizing should be completed 6/15.

Ayy thanks for the update!

Sent from my SM-G928V using Tapatalk

[megaforce]

We can expect the boards around first week of July then?

[Puddsy]

We can expect the boards around first week of July then?

never make assumptions on shipping

very good way to be disappointed

[afrokobe]

is the plate standard tkl design?  I wanted to get a brass plate cut.

[hoggy]

Update:

Machining scheduled to be finished 5/27.

Anodizing should be completed 6/15.

Super.  Always nice to be kept up to date.

Is there any chance of a video of the machining, please?

[_BMW_M3_]

We can expect the boards around first week of July then?

I mean, ideally... but you know how that goes.

is the plate standard tkl design?  I wanted to get a brass plate cut.

Not sure. Once sample is in I'll let you know! PM me if you don't hear back!

Update:

Machining scheduled to be finished 5/27.

Anodizing should be completed 6/15.

Super.  Always nice to be kept up to date.

Is there any chance of a video of the machining, please?

I doubt it. It's being done in a factory in KR...

[Cocopah]

We can expect the boards around first week of July then?

I mean, ideally... but you know how that goes.

is the plate standard tkl design?  I wanted to get a brass plate cut.

Not sure. Once sample is in I'll let you know! PM me if you don't hear back!

Update:

Machining scheduled to be finished 5/27.

Anodizing should be completed 6/15.

Super.  Always nice to be kept up to date.

Is there any chance of a video of the machining, please?

I doubt it. It's being done in a factory in KR...

Are we gonna get an online spreadsheet made up to check status?

[Unforgivable]

Update:

Machining scheduled to be finished 5/27.

Anodizing should be completed 6/15.

Out of curiosity, any chance you could convince Lin to gift us a Dyesub Dolphin keycap per board?

Any chance he'll be running his dye sub PBT group buys again? His stuff looked just like OG Cherry stuff! Scoops and all!

[afrokobe]

We can expect the boards around first week of July then?

I mean, ideally... but you know how that goes.

is the plate standard tkl design?  I wanted to get a brass plate cut.

Not sure. Once sample is in I'll let you know! PM me if you don't hear back!

Update:

Machining scheduled to be finished 5/27.

Anodizing should be completed 6/15.

Super.  Always nice to be kept up to date.

Is there any chance of a video of the machining, please?

I doubt it. It's being done in a factory in KR...

thanks! I'm so excited for this board.

[iArson]

Update:

Machining scheduled to be finished 5/27.

Anodizing should be completed 6/15.

Out of curiosity, any chance you could convince Lin to gift us a Dyesub Dolphin keycap per board?

Any chance he'll be running his dye sub PBT group buys again? His stuff looked just like OG Cherry stuff! Scoops and all!

To be fair I'd pay extra for it. I don't think I'm the only one.


Sent from my iPhone using Tapatalk

[Tally810]

Update:

Machining scheduled to be finished 5/27.

Anodizing should be completed 6/15.

Out of curiosity, any chance you could convince Lin to gift us a Dyesub Dolphin keycap per board?

Any chance he'll be running his dye sub PBT group buys again? His stuff looked just like OG Cherry stuff! Scoops and all!

To be fair I'd pay extra for it. I don't think I'm the only one.


Sent from my iPhone using Tapatalk

Yup I'd also pay extra

Sent from my SM-G928V using Tapatalk

[lanyusea]

Update:

Machining scheduled to be finished 5/27.

Anodizing should be completed 6/15.

Out of curiosity, any chance you could convince Lin to gift us a Dyesub Dolphin keycap per board?

Any chance he'll be running his dye sub PBT group buys again? His stuff looked just like OG Cherry stuff! Scoops and all!

Interesting, any picture of the keycap?

[_BMW_M3_]

Are we gonna get an online spreadsheet made up to check status?
[/quote]

I do not currently have a spreadsheet. In the future, I may create one. For any status/order checks, just simply PM me for now.

Update:

Machining scheduled to be finished 5/27.

Anodizing should be completed 6/15.

Out of curiosity, any chance you could convince Lin to gift us a Dyesub Dolphin keycap per board?

Any chance he'll be running his dye sub PBT group buys again? His stuff looked just like OG Cherry stuff! Scoops and all!

I'm not really sure what his plans are regarding that. Sorry!

[Unforgivable]

Update:

Machining scheduled to be finished 5/27.

Anodizing should be completed 6/15.

Out of curiosity, any chance you could convince Lin to gift us a Dyesub Dolphin keycap per board?

Any chance he'll be running his dye sub PBT group buys again? His stuff looked just like OG Cherry stuff! Scoops and all!

Interesting, any picture of the keycap?

Sorry, I didn't see this!

If you look at the first page, there's an imgur link that shows a few color samples. One of the boards has a Dolphin keycap and Whale keycap.

I think it would be such an awesome addition, just as a novelty.

[Tally810]

Update:

Machining scheduled to be finished 5/27.

Anodizing should be completed 6/15.

Out of curiosity, any chance you could convince Lin to gift us a Dyesub Dolphin keycap per board?

Any chance he'll be running his dye sub PBT group buys again? His stuff looked just like OG Cherry stuff! Scoops and all!

Interesting, any picture of the keycap?

Sorry, I didn't see this!

If you look at the first page, there's an imgur link that shows a few color samples. One of the boards has a Dolphin keycap and Whale keycap.

I think it would be such an awesome addition, just as a novelty.

Definitely would be a cool addition to the buy

Sent from my SM-G928V using Tapatalk

[afrokobe]

can colors choices be changed up until ano?

[Tally810]

can colors choices be changed up until ano?

I'm curious about this too

Sent from my SM-G928V using Tapatalk

[_BMW_M3_]

https://docs.google.com/spreadsheets/d/1Is4xiHPJ-WfkKh1ONVtm8Thl021AdN7prRtfXoXSe9Q/edit?usp=sharing

Anodizing will begin in the next few days. PM me ASAP if these colors are not correct. I will update the sheet tomorrow morning with tag colors as I forgot.

[Tally810]

https://docs.google.com/spreadsheets/d/1Is4xiHPJ-WfkKh1ONVtm8Thl021AdN7prRtfXoXSe9Q/edit?usp=sharing

Anodizing will begin in the next few days. PM me ASAP if these colors are not correct. I will update the sheet tomorrow morning with tag colors as I forgot.

Whoa that was fast.  Super hype.  Btw it seems u are missing my email on the sheet.  Pm incoming.

Sent from my SM-G928V using Tapatalk

[LDobler]

How long does anodizing take? Can't wait to get my hands on my dolphin!

[loud_asian]

Machining was scheduled to finish 5/27

Since we're beginning anodizing soon, does that mean we're ahead of schedule?

[nguyenkimtam]

There are just 60 sets complete machining. The anodizing process would take around 45 days


Sent from my iPhone using Tapatalk

[Tally810]

There are just 60 sets complete machining. The anodizing process would take around 45 days


Sent from my iPhone using Tapatalk

Seems like you guys are on top of it.  Nice job and thanks for the buy!

Sent from my SM-G928V using Tapatalk

[mech0nly]

HYPE!


Sent from my iPhone using Tapatalk

[Cocopah]

https://docs.google.com/spreadsheets/d/1Is4xiHPJ-WfkKh1ONVtm8Thl021AdN7prRtfXoXSe9Q/edit?usp=sharing

Anodizing will begin in the next few days. PM me ASAP if these colors are not correct. I will update the sheet tomorrow morning with tag colors as I forgot.

There are just 60 sets complete machining. The anodizing process would take around 45 days


Sent from my iPhone using Tapatalk

 Thanks for the update guys, excellent work!

[Unforgivable]

https://docs.google.com/spreadsheets/d/1Is4xiHPJ-WfkKh1ONVtm8Thl021AdN7prRtfXoXSe9Q/edit?usp=sharing

Anodizing will begin in the next few days. PM me ASAP if these colors are not correct. I will update the sheet tomorrow morning with tag colors as I forgot.

My Extras and EM7 order isn't shown on the spreadsheet, should I be concerned?

[loud_asian]

https://docs.google.com/spreadsheets/d/1Is4xiHPJ-WfkKh1ONVtm8Thl021AdN7prRtfXoXSe9Q/edit?usp=sharing

Anodizing will begin in the next few days. PM me ASAP if these colors are not correct. I will update the sheet tomorrow morning with tag colors as I forgot.

My Extras and EM7 order isn't shown on the spreadsheet, should I be concerned?

That board might be in the machining phase

[Unforgivable]

https://docs.google.com/spreadsheets/d/1Is4xiHPJ-WfkKh1ONVtm8Thl021AdN7prRtfXoXSe9Q/edit?usp=sharing

Anodizing will begin in the next few days. PM me ASAP if these colors are not correct. I will update the sheet tomorrow morning with tag colors as I forgot.

My Extras and EM7 order isn't shown on the spreadsheet, should I be concerned?

That board might be in the machining phase

Oh, derp! Just saw Shin's comment. Thanks Loud!

Excited for my Dolphin and EM7. It's gonna be wild!

[megaforce]

[Unforgivable]

https://docs.google.com/spreadsheets/d/1Is4xiHPJ-WfkKh1ONVtm8Thl021AdN7prRtfXoXSe9Q/edit?usp=sharing

Anodizing will begin in the next few days. PM me ASAP if these colors are not correct. I will update the sheet tomorrow morning with tag colors as I forgot.

My Extras and EM7 order isn't shown on the spreadsheet, should I be concerned?

That board might be in the machining phase

Just checked, apparently my paid Dolphin was logged, but my paid EM7 and extras for both were forgotten. Hoping my orders get fixed ASAP. 

[_BMW_M3_]

Hey guys, quick update:

The GSheet I linked (found here: https://docs.google.com/spreadsheets/d/1Is4xiHPJ-WfkKh1ONVtm8Thl021AdN7prRtfXoXSe9Q/edit#gid=0) was only created for a quick reference for Lin. I haven't finished adding pcb, extra plate, tags, etc. I will hopefully get those finished tonight. I will post an update so you all can reference your final orders. I got a little too busy yesterday to finish up the sheet. I will ask Lin to wait a few days so everyone can verify their orders look okay and I will give him the go ahead to start anodizing those 60 boards. Thanks everyone! As always, PM me if you have any questions/concerns or if something doesn't look right with your order. (I'm human! I make mistakes!)


HHHYYYPPPPEEEEEE TRAINNNN!

[Unforgivable]

Hey guys, quick update:

The GSheet I linked (found here: https://docs.google.com/spreadsheets/d/1Is4xiHPJ-WfkKh1ONVtm8Thl021AdN7prRtfXoXSe9Q/edit#gid=0) was only created for a quick reference for Lin. I haven't finished adding pcb, extra plate, tags, etc. I will hopefully get those finished tonight. I will post an update so you all can reference your final orders. I got a little too busy yesterday to finish up the sheet. I will ask Lin to wait a few days so everyone can verify their orders look okay and I will give him the go ahead to start anodizing those 60 boards. Thanks everyone! As always, PM me if you have any questions/concerns or if something doesn't look right with your order. (I'm human! I make mistakes!)


HHHYYYPPPPEEEEEE TRAINNNN!

That's a relief! I was worried there for a second since I didn't see my second order/extras.

HYPEEEEEE! This is going so smoothly so far.

I mean, I know I have time but I'm panicking over which switches to use...

WHICH ONES?! SOME PLS!

[afrokobe]

Hey guys, quick update:

The GSheet I linked (found here: https://docs.google.com/spreadsheets/d/1Is4xiHPJ-WfkKh1ONVtm8Thl021AdN7prRtfXoXSe9Q/edit#gid=0) was only created for a quick reference for Lin. I haven't finished adding pcb, extra plate, tags, etc. I will hopefully get those finished tonight. I will post an update so you all can reference your final orders. I got a little too busy yesterday to finish up the sheet. I will ask Lin to wait a few days so everyone can verify their orders look okay and I will give him the go ahead to start anodizing those 60 boards. Thanks everyone! As always, PM me if you have any questions/concerns or if something doesn't look right with your order. (I'm human! I make mistakes!)


HHHYYYPPPPEEEEEE TRAINNNN!

That's a relief! I was worried there for a second since I didn't see my second order/extras.

HYPEEEEEE! This is going so smoothly so far.

I mean, I know I have time but I'm panicking over which switches to use...

WHICH ONES?! SOME PLS!

Vintage blacks!!!! Obvious choice.

Im so hyyyyyyyyyypeeed

[_BMW_M3_]

Okay guys, the sheet is updated. Wednesday is the submission date, so everything according to this sheet is final come Wednesday: https://docs.google.com/spreadsheets/d/1Is4xiHPJ-WfkKh1ONVtm8Thl021AdN7prRtfXoXSe9Q/edit?usp=sharing

As always, PM me with any questions/concerns. Cheers!

[loud_asian]

Where does the tag go on the board? Is it the gap between the escape and f1 keys?

[_BMW_M3_]

Where does the tag go on the board? Is it the gap between the escape and f1 keys?

Yes, on the Dolphin. See first page renders for reference.

[laughatpain]

Still super conflicted on case colors. I made a quick count of all the dolphin combinations.

Combinations I'm on the fence with:
Silver/Silver
Gray/Black
Black/Black

I want an all black collection of boards, but gray/silver is just overall appealing 

[Cocopah]

I seen Lin did a Dolphin keypad buy. _BMW_M3_ and nguyenkimtam, is there any chance you guys could talk him into doing a buy for us? 

[CMYK]

I seen Lin did a Dolphin keypad buy. _BMW_M3_ and nguyenkimtam, is there any chance you guys could talk him into doing a buy for us? 

I absolutely want/need a matching numpad.

[iArson]

I seen Lin did a Dolphin keypad buy. _BMW_M3_ and nguyenkimtam, is there any chance you guys could talk him into doing a buy for us? 

I absolutely want/need a matching numpad.

Same

[afrokobe]

i also support the numpad

[_BMW_M3_]

I seen Lin did a Dolphin keypad buy. _BMW_M3_ and nguyenkimtam, is there any chance you guys could talk him into doing a buy for us? 

There's a chance we could do it for sure, as we've already talked about it. It probably won't be for a while though, going to be taking a bit of a break once this GB is finished!

[iArson]

I seen Lin did a Dolphin keypad buy. _BMW_M3_ and nguyenkimtam, is there any chance you guys could talk him into doing a buy for us? 

There's a chance we could do it for sure, as we've already talked about it. It probably won't be for a while though, going to be taking a bit of a break once this GB is finished!

Would we be able to get one if we're participating in the original dolphin GB? Or would it be another raffle

Sent from my SM-G955U using Tapatalk

[_BMW_M3_]

I seen Lin did a Dolphin keypad buy. _BMW_M3_ and nguyenkimtam, is there any chance you guys could talk him into doing a buy for us? 

There's a chance we could do it for sure, as we've already talked about it. It probably won't be for a while though, going to be taking a bit of a break once this GB is finished!

Would we be able to get one if we're participating in the original dolphin GB? Or would it be another raffle

Sent from my SM-G955U using Tapatalk

You're looking way too far in advance. I have no idea with any of that. It wouldn't be for a while and we have not planned on anything yet.

[mech0nly]

Hmm
I just realized only alu plate available.
I'm thinking about making SS/brass plate for em7, is it possible to get CAD file for the plate?

[_BMW_M3_]

Hmm
I just realized only alu plate available.
I'm thinking about making SS/brass plate for em7, is it possible to get CAD file for the plate?

I'll ask Lin if it's possible.

[ipreferpie]

Hmm
I just realized only alu plate available.
I'm thinking about making SS/brass plate for em7, is it possible to get CAD file for the plate?

I'll ask Lin if it's possible.

Excellent! I'm in for a SS plate

[mech0nly]

Hmm
I just realized only alu plate available.
I'm thinking about making SS/brass plate for em7, is it possible to get CAD file for the plate?

I'll ask Lin if it's possible.

Excellent! I'm in for a SS plate

I'm sorry for misunderstandings, i mean i'll cut it myself in local shops

[ipreferpie]

Hmm
I just realized only alu plate available.
I'm thinking about making SS/brass plate for em7, is it possible to get CAD file for the plate?

I'll ask Lin if it's possible.

Excellent! I'm in for a SS plate

I'm sorry for misunderstandings, i mean i'll cut it myself in local shops

Ah sorry, will cut one myself if there's a file made