Author Topic: [GB] KIRA EXS - Complete  (Read 86993 times)

0 Members and 1 Guest are viewing this topic.

Offline beamingrobot

  • * Vendor
  • Thread Starter
  • Posts: 579
  • Location: Singapore | Malaysia
  • もうけい
    • monokei
[GB] KIRA EXS - Complete
« on: Wed, 28 February 2018, 08:38:48 »
Hi all,





This is the GB for the KIRA EXS by thesiscamper, group buy will be done via monokei.us

Included in the set:


  • Top piece
  • Insert (acrylic)
  • ANSI plate (no ISO option)
  • PCB (mini USB)
  • Bottom piece
  • Brass weight (MATTE finish, Sun and Stars design)
  • typing angle is 8*
  • PCB will have resistors and SMDs soldered

Info:

  • GB limited to 25 sets
  • Only top left engraving with KIRA logo, (ignore the KingSurfer one you see, that's just the prototype
  • Plate supports varied bottom row (6.25u, 7u spacebars)
  • Additional polycarbonate, aluminium and brass plates available. Additional aluminium inserts and PCB available as well.


Additional pictures
https://imgur.com/a/4CH6k



Prices (USD):
  • $390 for one set (case, insert, PCB, brass weight, aluminium plate), does not include shipping.
  • $50 for additional brass switch plate
  • $38 for additional polycarbonate switch plate
  • $33 for additional aluminium switch plate
  • $48 for additional PCB
  • $23 for additional acylic insert
  • $38 for additional aluminium insert

Shipping:

  • Shipping from Singapore.
  • Shipping cost will depend on location.
  • Base set weighs about 3.3kg.
Estimated shipping cost (USD):
  • Singapore: $4
  • Malaysia: $17
  • Australia: $44
  • Korea: $27
  • USA: $62
  • Germany: $51

Payment:
  • Prices listed are in USD. Payment in SGD as the shop can only process in SGD, sorry :(
  • No PayPal invoice. All payment via Shopify payments so buyer protection still available
  • Shipping will be calculated once the orders are ready to go out, so you'll receive additional instructions then

Misc:

  • Deadline for raffle entry is 12am on 02 March 2018 (SGT, GMT+8).
  • Deadline for payment is 48 hours.
  • Countdown timer.
  • Raffle entries will be RNG-ed, and then you will receive an email regarding payment and other things.
  • For any changes to your order, please send a PM when necessary. Please note that this is a small buy and we will proceed with manufacturing very soon, so changes might disrupt the process.
  • Please include your order number when sending a PM for changes.
  • No refunds or transfer of spots once payment has gone through to the factory. These will be possible once we receive the items to minimize too many refunds/transfers/sales of spots that tend to happen

Order check (To be updated):




« Last Edit: Sun, 07 April 2019, 19:31:18 by beamingrobot »
http://monokei.co

Jane v2 | Jane v2 CE | Police | EXENT | KFE | KFE CE | Singa R1 | Jaguar | HHKB | Custom G80-3000 | Dalco 959mini | Haus | Kei | Hiro | Hidari | Tomo | Neko | Prophet | MXSS | TKL One | RS

Offline beamingrobot

  • * Vendor
  • Thread Starter
  • Posts: 579
  • Location: Singapore | Malaysia
  • もうけい
    • monokei
Re: [GB] KIRA EXS
« Reply #1 on: Wed, 28 February 2018, 08:39:01 »
List of participants:

Winners (1-25)

Xine007
oHimari
SmallWind
Aktavate
papedahut
Phrillis
bminhz
reggalicious
TanginamoEli
OracleKev
poisonking
Belly
YisSerL
longnt
Ray160
jdlee777
random0987
photoelectric
Chimera

mudcakehoney
aspenc4
Krytone
yonghf
Kokokoy
jchan

next on the list (26-30)

« Last Edit: Wed, 14 March 2018, 10:12:54 by beamingrobot »
http://monokei.co

Jane v2 | Jane v2 CE | Police | EXENT | KFE | KFE CE | Singa R1 | Jaguar | HHKB | Custom G80-3000 | Dalco 959mini | Haus | Kei | Hiro | Hidari | Tomo | Neko | Prophet | MXSS | TKL One | RS

Offline infiniti

  • I <3 KB
  • * Senior Moderator
  • Posts: 2405
  • Location: Thrilla, Manila, Philippines
  • Bob was here
    • PM me and ask for a custom title!
Re: [GB] KIRA EXS
« Reply #2 on: Wed, 28 February 2018, 08:43:12 »
As a reminder to all, CAVEAT EMPTOR :triangle:

GLWGB! :thumb:


Offline OracleKev

  • Posts: 418
Re: [GB] KIRA EXS
« Reply #4 on: Wed, 28 February 2018, 09:10:02 »
Submited

Offline Aktavate

  • Posts: 39
Re: [GB] KIRA EXS
« Reply #5 on: Wed, 28 February 2018, 09:22:10 »
Submitted, sad there is no blue case option. =( also what is an aluminum diffuser?

Offline Jae-3soteric

  • Posts: 745
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] KIRA EXS
« Reply #6 on: Wed, 28 February 2018, 09:26:37 »
I'd def be in but no ISO really hurts...

Offline beamingrobot

  • * Vendor
  • Thread Starter
  • Posts: 579
  • Location: Singapore | Malaysia
  • もうけい
    • monokei
Re: [GB] KIRA EXS
« Reply #7 on: Wed, 28 February 2018, 09:39:03 »
I'd def be in but no ISO really hurts...

Come join us on the ANSI side  :p

Submitted, sad there is no blue case option. =( also what is an aluminum diffuser?

Sorry about not offering blue, but we really want to work with the factory to get the colours done right.

Aluminium diffuser is the aluminium insert that can be used to replace the acrylic insert. I'll update the OP.
« Last Edit: Wed, 28 February 2018, 09:41:20 by beamingrobot »
http://monokei.co

Jane v2 | Jane v2 CE | Police | EXENT | KFE | KFE CE | Singa R1 | Jaguar | HHKB | Custom G80-3000 | Dalco 959mini | Haus | Kei | Hiro | Hidari | Tomo | Neko | Prophet | MXSS | TKL One | RS

Offline ray160

  • Posts: 52
Re: [GB] KIRA EXS
« Reply #8 on: Wed, 28 February 2018, 09:42:37 »
Could we replace the aluminum plate with a brass plate instead of getting both?

Offline StayCreepin

  • Posts: 2
Re: [GB] KIRA EXS
« Reply #9 on: Wed, 28 February 2018, 09:49:11 »
Submitted, good luck to everyone. :thumb:

Offline beamingrobot

  • * Vendor
  • Thread Starter
  • Posts: 579
  • Location: Singapore | Malaysia
  • もうけい
    • monokei
Re: [GB] KIRA EXS
« Reply #10 on: Wed, 28 February 2018, 09:50:30 »
Could we replace the aluminum plate with a brass plate instead of getting both?

We need to hit the MOQ of 25 alu plates in order to get this price, so I don't think that's possible.
http://monokei.co

Jane v2 | Jane v2 CE | Police | EXENT | KFE | KFE CE | Singa R1 | Jaguar | HHKB | Custom G80-3000 | Dalco 959mini | Haus | Kei | Hiro | Hidari | Tomo | Neko | Prophet | MXSS | TKL One | RS

Offline clik_clak

  • Posts: 423
Re: [GB] KIRA EXS
« Reply #11 on: Wed, 28 February 2018, 09:59:18 »
Entered!

Thanks for doing this!

Offline bminhz

  • Posts: 114
  • Location: San Pellegrino
Re: [GB] KIRA EXS
« Reply #12 on: Wed, 28 February 2018, 10:03:53 »
Could we replace the aluminum plate with a brass plate instead of getting both?

I second this...Also are there any pics of the purple one? Couldn't seem to see it anywhere...

Offline beamingrobot

  • * Vendor
  • Thread Starter
  • Posts: 579
  • Location: Singapore | Malaysia
  • もうけい
    • monokei
Re: [GB] KIRA EXS
« Reply #13 on: Wed, 28 February 2018, 10:05:38 »
Could we replace the aluminum plate with a brass plate instead of getting both?

I second this...Also are there any pics of the purple one? Couldn't seem to see it anywhere...

We're going for a similar purple like the one done for the KIRA60:

https://geekhack.org/index.php?topic=92019.msg2562610#msg2562610
http://monokei.co

Jane v2 | Jane v2 CE | Police | EXENT | KFE | KFE CE | Singa R1 | Jaguar | HHKB | Custom G80-3000 | Dalco 959mini | Haus | Kei | Hiro | Hidari | Tomo | Neko | Prophet | MXSS | TKL One | RS

Offline RichardH

  • Posts: 37
Re: [GB] KIRA EXS
« Reply #14 on: Wed, 28 February 2018, 10:06:21 »
Entered! Good luck everyone!

-Rich

Offline zekkin

  • Posts: 508
  • my entire life was unlimited zekk works
Re: [GB] KIRA EXS
« Reply #15 on: Wed, 28 February 2018, 10:24:13 »
Considering the shipped price for a TX-CP during the GB/preorder this is a very good deal.

GLWGB!

Offline Photoelectric

  • * Administrator
  • Posts: 6766
Re: [GB] KIRA EXS
« Reply #16 on: Wed, 28 February 2018, 10:36:31 »
Is the aluminum diffuser going to be silver in color or have some other options? (for instance there's a green one in the blue prototype case).  Also, is it an option to only get the aluminum diffuser but not acrylic one?
- Keyboards: LZ-GH (Jailhouse Blues)M65-a, MIRA SE, E8-V1, MOON TKL, CA66
- Keyboard Case Painting Tips -
- Join Mechanical Keyboards photography group on Flickr -

Offline thesiscamper

  • * Maker
  • Posts: 975
    • Keyrenders
Re: [GB] KIRA EXS
« Reply #17 on: Wed, 28 February 2018, 10:42:45 »
Is the aluminum diffuser going to be silver in color or have some other options? (for instance there's a green one in the blue prototype case).  Also, is it an option to only get the aluminum diffuser but not acrylic one?

Aluminum inserts/gaskets can be other color than silver, but limited to what colors are offered in the buy. I'll let beamingrobot confirm though, as the specifics are mostly decided by him.



"haters are confused admirers"

Offline beamingrobot

  • * Vendor
  • Thread Starter
  • Posts: 579
  • Location: Singapore | Malaysia
  • もうけい
    • monokei
Re: [GB] KIRA EXS
« Reply #18 on: Wed, 28 February 2018, 10:58:06 »
Is the aluminum diffuser going to be silver in color or have some other options? (for instance there's a green one in the blue prototype case).  Also, is it an option to only get the aluminum diffuser but not acrylic one?

Aluminum inserts/gaskets can be other color than silver, but limited to what colors are offered in the buy. I'll let beamingrobot confirm though, as the specifics are mostly decided by him.



Is the aluminum diffuser going to be silver in color or have some other options? (for instance there's a green one in the blue prototype case).  Also, is it an option to only get the aluminum diffuser but not acrylic one?

Yeap as thesiscamper mentioned, it can be any of the colours available. As of now if you want the aluminium one just put it down as an additional part, if you do get into the buy during the order check process I can switch this out probably.
http://monokei.co

Jane v2 | Jane v2 CE | Police | EXENT | KFE | KFE CE | Singa R1 | Jaguar | HHKB | Custom G80-3000 | Dalco 959mini | Haus | Kei | Hiro | Hidari | Tomo | Neko | Prophet | MXSS | TKL One | RS

Offline eyedrop

  • Posts: 601
  • Location: Keeb Abyss
Re: [GB] KIRA EXS
« Reply #19 on: Wed, 28 February 2018, 11:05:26 »
Form submitted.  Hope the RNG will be nice to me this time around.

I didn't get in on the kira60 or the Canoe, fingers crossed I get picked.

I love the compact 1800 format.  Using my TX-CP as a daily at work.

Good luck to everyone!

Offline dangboy

  • Posts: 115
  • Location: California, USA
  • yes
Re: [GB] KIRA EXS
« Reply #20 on: Wed, 28 February 2018, 11:13:05 »
Form submitted! Went full ham with the purp on this, considering I've got 3 purple gmk sets on the way lel

GL bois

Offline eyedrop

  • Posts: 601
  • Location: Keeb Abyss
Re: [GB] KIRA EXS
« Reply #21 on: Wed, 28 February 2018, 11:30:46 »
Form submitted! Went full ham with the purp on this, considering I've got 3 purple gmk sets on the way lel

GL bois

Pairing the purple with GMK Taro?   :cool:

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 12275
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] KIRA EXS
« Reply #22 on: Wed, 28 February 2018, 12:37:32 »
Looks great, GLWGB!
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | ctrl.alt x GON 60% | TGR Alice | Mira SE #29 | Mira SE #34 | Revo One | z | Keycult No. 1 | AIS65 | First CW87 prototype | Mech27v1 | Camp C225 | Duck Orion V1 | LZ CLS sxh | Geon Frog TKL | Hiney TKL One | Geon Glare TKL



"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos, after I came back from a break | "Is Linkshine our Nixon?" -NAV | "Puddsy is the Puddsy of keebs" -ns90

Offline Pheyn

  • Posts: 30
  • Location: California
Re: [GB] KIRA EXS
« Reply #23 on: Wed, 28 February 2018, 12:51:27 »
Submitted. This is my first gb raffle so my fingers are crossed!

Good luck everyone!

Offline Corgi Butts

  • Posts: 332
Re: [GB] KIRA EXS
« Reply #24 on: Wed, 28 February 2018, 13:04:14 »
First Kustom raffle for me, explain why I would want extra diffusers or switchplates or PCBs?  Poly vs Alu vs Brass?  Much confuse on all the addons. 

Offline zekkin

  • Posts: 508
  • my entire life was unlimited zekk works
Re: [GB] KIRA EXS
« Reply #25 on: Wed, 28 February 2018, 13:12:58 »
First Kustom raffle for me, explain why I would want extra diffusers or switchplates or PCBs?  Poly vs Alu vs Brass?  Much confuse on all the addons.

In high end customs it's pretty common to get an extra PCB and plate so you can have two completely different configurations that are easily changeable when the board uses a top mount (plate screwed to the top part of the case rather than to the bottom) design.

In my opinion, plate material variation is meant to provide a choice of feeling beyond what you choose for switches.

  • Polycarbonate is a durable, flexible plastic, feels sorta soft but similar to aluminum.
  • Aluminum is a flexible, durable metal. Most common of plate materials.
  • Brass is strong, rigid, and in my opinion provides the best sound. It retains some of the thock of aluminum albeit with a slightly more muted sound. When I say muted, I mean in the sense that a musical instrument can be muted; you still hear the instrument but with a slightly different sound profile. Brass is by far my favorite plate material.

Offline ray160

  • Posts: 52
Re: [GB] KIRA EXS
« Reply #26 on: Wed, 28 February 2018, 14:01:55 »
If the GB goes well, will there be a round 2 soon after?

Offline Petch

  • Posts: 536
  • Location: UK
Re: [GB] KIRA EXS
« Reply #27 on: Wed, 28 February 2018, 14:15:33 »
Sandwich mount or top mount plate?

Offline Aktavate

  • Posts: 39
Re: [GB] KIRA EXS
« Reply #28 on: Wed, 28 February 2018, 15:46:00 »


Aluminium diffuser is the aluminium insert that can be used to replace the acrylic insert. I'll update the OP.

Thanks, confusing because the form requires you to choose an aluminum insert color even though its (I think) an optional addition. This is my first raffle, if we are selected will we have a chance to confirm our order selections before production? I was so excited I forget what selections I made  :-\

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 12275
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] KIRA EXS
« Reply #29 on: Wed, 28 February 2018, 15:48:29 »
First Kustom raffle for me, explain why I would want extra diffusers or switchplates or PCBs?  Poly vs Alu vs Brass?  Much confuse on all the addons.

Extra plate/pcb is good incase something breaks/the person you sell it to wants to build it with something else

desoldering sucks
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | ctrl.alt x GON 60% | TGR Alice | Mira SE #29 | Mira SE #34 | Revo One | z | Keycult No. 1 | AIS65 | First CW87 prototype | Mech27v1 | Camp C225 | Duck Orion V1 | LZ CLS sxh | Geon Frog TKL | Hiney TKL One | Geon Glare TKL



"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos, after I came back from a break | "Is Linkshine our Nixon?" -NAV | "Puddsy is the Puddsy of keebs" -ns90

Offline gutsack

  • Posts: 193
Re: [GB] KIRA EXS
« Reply #30 on: Wed, 28 February 2018, 16:46:27 »
Sorry if I missed it somewhere but what firmware does the PCB run?

Offline thesiscamper

  • * Maker
  • Posts: 975
    • Keyrenders
Re: [GB] KIRA EXS
« Reply #31 on: Wed, 28 February 2018, 17:02:47 »
Sandwich mount or top mount plate?

Top-mount, I admit it kinda looks like the plate is sandwiched between the top and bottom lol.



Aluminium diffuser is the aluminium insert that can be used to replace the acrylic insert. I'll update the OP.

Thanks, confusing because the form requires you to choose an aluminum insert color even though its (I think) an optional addition. This is my first raffle, if we are selected will we have a chance to confirm our order selections before production? I was so excited I forget what selections I made  :-\

You should be able to have them changed/confirmed later, as long as the order hasn't been submitted to the factory. Further changes after this will get confusing for everyone, especially the factory.

Sorry if I missed it somewhere but what firmware does the PCB run?

The prototypes are running ps2avrgb, but the PCB designer is currently trying QMK out. If it doesn't work out, we go back to ps2avr.


"haters are confused admirers"

Offline ChitownM2

  • Posts: 326
Re: [GB] KIRA EXS
« Reply #32 on: Wed, 28 February 2018, 17:48:42 »
Haven't been paying took much attention on here lately, is this a totally separate project from the kira thesis was working on with input club or is that not happening now and this is it?

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 12275
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] KIRA EXS
« Reply #33 on: Wed, 28 February 2018, 17:56:15 »
Haven't been paying took much attention on here lately, is this a totally separate project from the kira thesis was working on with input club or is that not happening now and this is it?

separate project
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | ctrl.alt x GON 60% | TGR Alice | Mira SE #29 | Mira SE #34 | Revo One | z | Keycult No. 1 | AIS65 | First CW87 prototype | Mech27v1 | Camp C225 | Duck Orion V1 | LZ CLS sxh | Geon Frog TKL | Hiney TKL One | Geon Glare TKL



"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos, after I came back from a break | "Is Linkshine our Nixon?" -NAV | "Puddsy is the Puddsy of keebs" -ns90

Offline thesiscamper

  • * Maker
  • Posts: 975
    • Keyrenders
Re: [GB] KIRA EXS
« Reply #34 on: Wed, 28 February 2018, 18:05:04 »
Haven't been paying took much attention on here lately, is this a totally separate project from the kira thesis was working on with input club or is that not happening now and this is it?

Haven't been paying took much attention on here lately, is this a totally separate project from the kira thesis was working on with input club or is that not happening now and this is it?

separate project

Puddsy is correct, thanks. This is a separate and the 96-key should launch soon. I made this design because I realized I want the spacing between arrow keys and numpad.


"haters are confused admirers"

Offline The_judge_168

  • Posts: 261
Re: [GB] KIRA EXS
« Reply #35 on: Wed, 28 February 2018, 19:46:12 »
What angle is the case?

Offline p_blaze

  • Posts: 449
Re: [GB] KIRA EXS
« Reply #36 on: Wed, 28 February 2018, 20:10:38 »
What angle is the case?

I think it's about 8 as per the IC

Offline Rapsky

  • Posts: 5
  • Location: Philippines
Re: [GB] KIRA EXS
« Reply #37 on: Wed, 28 February 2018, 20:39:49 »
Its my time!!!
RS78 ZZ96
GMK Laser SA Carbon MT3

Offline Chimera

  • Posts: 152
  • Location: North Bay
Re: [GB] KIRA EXS
« Reply #38 on: Wed, 28 February 2018, 20:51:40 »
Trying to decide on this and the Espectro for a 96 build.

Is there an estimated delivery on these at all?

Edit: I saw that it comes with a polycarbonite diffuser, is the pcb going to have LEDs or are they included at all?
« Last Edit: Wed, 28 February 2018, 20:53:49 by Chimera »

Offline kokokoy

  • Posts: 164
Re: [GB] KIRA EXS
« Reply #39 on: Wed, 28 February 2018, 21:21:19 »
Stars & Sun or KIRA bottom?

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 12275
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] KIRA EXS
« Reply #40 on: Wed, 28 February 2018, 21:32:23 »
Stars & Sun or KIRA bottom?

stars and sun as discussed in IC, i should hope
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | ctrl.alt x GON 60% | TGR Alice | Mira SE #29 | Mira SE #34 | Revo One | z | Keycult No. 1 | AIS65 | First CW87 prototype | Mech27v1 | Camp C225 | Duck Orion V1 | LZ CLS sxh | Geon Frog TKL | Hiney TKL One | Geon Glare TKL



"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos, after I came back from a break | "Is Linkshine our Nixon?" -NAV | "Puddsy is the Puddsy of keebs" -ns90

Offline Krytone

  • * Maker
  • Posts: 598
  • Location: Rollin in the deep
  • ᕦ(ò_óˇ)ᕤ
    • Krap Shop
Re: [GB] KIRA EXS
« Reply #41 on: Wed, 28 February 2018, 21:35:49 »
Trying to decide on this and the Espectro for a 96 build.

Is there an estimated delivery on these at all?

Edit: I saw that it comes with a polycarbonite diffuser, is the pcb going to have LEDs or are they included at all?
i believe the rgb smd in the bottom pcb are included and soldered already when you purchase the pcb.
TGR Jane CE | TX-CP | ZZ96 | HHKB | Ducky Shine 3 | Atreus | Infinity Ergodox | IBM Model M | Smart Pad | Taobao Acrylic 96 | TGR910 SE | RGB96 | M4-A | Moon

Pending: Exent | EM7 | M-60 | Kira EXS | 910 Poly | Kn210 | Alice

Offline DillonHightower

  • Formerly DillonHighsmith
  • Posts: 309
Re: [GB] KIRA EXS
« Reply #42 on: Wed, 28 February 2018, 21:36:28 »
Entered. Keeping the fingers crossed 🙏🙏
            

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 12275
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] KIRA EXS
« Reply #43 on: Wed, 28 February 2018, 21:36:59 »
Trying to decide on this and the Espectro for a 96 build.

Is there an estimated delivery on these at all?

Edit: I saw that it comes with a polycarbonite diffuser, is the pcb going to have LEDs or are they included at all?
i believe the rgb smd in the bottom pcb are included and soldered already when you purchase the pcb.

this is correct, it's the standard
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | ctrl.alt x GON 60% | TGR Alice | Mira SE #29 | Mira SE #34 | Revo One | z | Keycult No. 1 | AIS65 | First CW87 prototype | Mech27v1 | Camp C225 | Duck Orion V1 | LZ CLS sxh | Geon Frog TKL | Hiney TKL One | Geon Glare TKL



"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos, after I came back from a break | "Is Linkshine our Nixon?" -NAV | "Puddsy is the Puddsy of keebs" -ns90

Offline Chimera

  • Posts: 152
  • Location: North Bay
Re: [GB] KIRA EXS
« Reply #44 on: Wed, 28 February 2018, 21:44:19 »
Thanks for the clarification.

Entered.

Good luck everyone!

Offline Artist

  • Posts: 13
  • Location: Vietnam
  • A Fine Architect to be!
Re: [GB] KIRA EXS
« Reply #45 on: Wed, 28 February 2018, 22:30:01 »
Did the raffle form, however I notice a mistake in the 1st page of the form:

"Base kit contains: top piece, bottom piece, acrylic diffuser,PCB, brass weight"

which is missing the "ANSI plate"?

Entered anyway. Good luck guys!

Offline Kekinator

  • Posts: 1
Re: [GB] KIRA EXS
« Reply #46 on: Wed, 28 February 2018, 22:48:26 »
All aboard the hype train!

Offline kokokoy

  • Posts: 164
Re: [GB] KIRA EXS
« Reply #47 on: Wed, 28 February 2018, 23:06:33 »
Stars & Sun or KIRA bottom?

stars and sun as discussed in IC, i should hope

i know it was the preferred one on the thread but never saw any confirmation (or i might just have missed it)

anyway thanks Puddsy.

Offline dangboy

  • Posts: 115
  • Location: California, USA
  • yes
Re: [GB] KIRA EXS
« Reply #48 on: Wed, 28 February 2018, 23:49:07 »
Form submitted! Went full ham with the purp on this, considering I've got 3 purple gmk sets on the way lel

GL bois

Pairing the purple with GMK Taro?   :cool:
Absolutely.

Offline thesiscamper

  • * Maker
  • Posts: 975
    • Keyrenders
Re: [GB] KIRA EXS
« Reply #49 on: Thu, 01 March 2018, 06:10:17 »
Just wanna confirm a few things, the answers given by others are correct.

  • weight is the stars and sun design
  • typing angle is 8*
  • base kit includes the "ANSI plate"
  • PCB will have resistors and SMDs soldered


"haters are confused admirers"