geekhack

geekhack Marketplace => Interest Checks => Topic started by: The_Beast on Mon, 21 April 2014, 21:55:53

Title: [IC] - Ti switch tool finish
Post by: The_Beast on Mon, 21 April 2014, 21:55:53: (http://i.imgur.com/JMHhG7L.jpg)

(http://i.imgur.com/8gkeQN7.jpg)

Top is A (picture 1): no extra finishing, laser cut edges, rough sanded finish from the laser cutter, some blow out around the holes

Bottom is B (picture 1): hand sanded by me, extra costs ($7), the inside forks won't be sanded since they're hard to get to, looks a lot like darker brushed stainless

Vote in the comments below.
Title: Re: [IC] - Ti switch tool finish
Post by: Pacifist on Mon, 21 April 2014, 21:56:26: B!!!!
Title: Re: [IC] - Ti switch tool finish
Post by: Flyersfan1 on Mon, 21 April 2014, 22:00:06: In for B as well, they look awesome!
Title: Re: [IC] - Ti switch tool finish
Post by: CommonCurt on Mon, 21 April 2014, 22:00:28: B
Title: Re: [IC] - Ti switch tool finish
Post by: SpAmRaY on Mon, 21 April 2014, 22:01:52: What's the cost to start with?
Title: Re: [IC] - Ti switch tool finish
Post by: strict on Mon, 21 April 2014, 22:02:18: I'm partial to B as well. Is there any usability difference having the legs sanded down as seen in B? What would the base cost be (roughly) that could then have $7 added on to?
Title: Re: [IC] - Ti switch tool finish
Post by: CommonCurt on Mon, 21 April 2014, 22:05:10: Will there be a option to have them bent?
Title: Re: [IC] - Ti switch tool finish
Post by: geniekid on Mon, 21 April 2014, 22:08:31: +1 for B, although I'd still be all over A. I was literally in the middle of making a classified post for switch tools when I read this post ;D
Title: Re: [IC] - Ti switch tool finish
Post by: Zeal on Mon, 21 April 2014, 22:09:36: Option B.

So are switch tools coming real soon™? :)
Title: Re: [IC] - Ti switch tool finish
Post by: The_Beast on Mon, 21 April 2014, 22:12:59: Quote from: strict on Mon, 21 April 2014, 22:02:18
I'm partial to B as well. Is there any usability difference having the legs sanded down as seen in B? What would the base cost be (roughly) that could then have $7 added on to?

Since the ti stock was 14 guage, they need to be sanded down to fit into the switch tops. The legs no mater the finish option will need to be sanded

The base price w/o is $25 and they will be bent
Title: Re: [IC] - Ti switch tool finish
Post by: Cottonsox on Mon, 21 April 2014, 22:17:41: Option B, would buy both tho.
Title: Re: [IC] - Ti switch tool finish
Post by: strict on Mon, 21 April 2014, 22:23:44: Quote from: The_Beast on Mon, 21 April 2014, 22:12:59
Quote from: strict on Mon, 21 April 2014, 22:02:18
I'm partial to B as well. Is there any usability difference having the legs sanded down as seen in B? What would the base cost be (roughly) that could then have $7 added on to?

Since the ti stock was 14 guage, they need to be sanded down to fit into the switch tops. The legs no mater the finish option will need to be sanded

The base price w/o is $25 and they will be bent

Option B was my first choice thinking it would be the only option with sanded legs, but if they will both sanded I would be totally content with either. I would still probably go with B but definitely would not be disappointed by A.
Title: Re: [IC] - Ti switch tool finish
Post by: CommonCurt on Mon, 21 April 2014, 22:26:53: Quote from: strict on Mon, 21 April 2014, 22:23:44
Quote from: The_Beast on Mon, 21 April 2014, 22:12:59
Quote from: strict on Mon, 21 April 2014, 22:02:18
I'm partial to B as well. Is there any usability difference having the legs sanded down as seen in B? What would the base cost be (roughly) that could then have $7 added on to?

Since the ti stock was 14 guage, they need to be sanded down to fit into the switch tops. The legs no mater the finish option will need to be sanded

The base price w/o is $25 and they will be bent

Option B was my first choice thinking it would be the only option with sanded legs, but if they will both sanded I would be totally content with either. I would still probably go with B but definitely would not be disappointed by A.

+1 ^same thing^
Title: Re: [IC] - Ti switch tool finish
Post by: tbc on Mon, 21 April 2014, 22:35:44: B please

is this like a vote for everyone to get one finish or just to quickly gauge the ratio of orders?
Title: Re: [IC] - Ti switch tool finish
Post by: The_Beast on Mon, 21 April 2014, 22:37:10: Quote from: tbc on Mon, 21 April 2014, 22:35:44
B please

is this like a vote for everyone to get one finish or just to quickly gauge the ratio of orders?

I'm thinking everyone gets the majority option. I want these ready to ship once the sale is up
Title: Re: [IC] - Ti switch tool finish
Post by: strict on Mon, 21 April 2014, 22:50:58: Quote from: The_Beast on Mon, 21 April 2014, 22:37:10
I'm thinking everyone gets the majority option. I want these ready to ship once the sale is up

(http://mashable.com/wp-content/uploads/2013/07/excited-baby.gif)

After missing out on the 420 sales I will be totally defeated if I miss out on these too, I've been looking forward to this for months! Any rough ETA on when we might see the sale? If you're not comfortable giving a date yet thats totally understandable.
Title: Re: [IC] - Ti switch tool finish
Post by: jorgenslee on Mon, 21 April 2014, 22:51:37: A for me if this have sanded legs, if not definitely B.
Title: Re: [IC] - Ti switch tool finish
Post by: The_Beast on Mon, 21 April 2014, 22:52:05: Quote from: strict on Mon, 21 April 2014, 22:50:58
Quote from: The_Beast on Mon, 21 April 2014, 22:37:10
I'm thinking everyone gets the majority option. I want these ready to ship once the sale is up

Show Image
(http://mashable.com/wp-content/uploads/2013/07/excited-baby.gif)

After missing out on the 420 sales I will be totally defeated if I miss out on these too, I've been looking forward to this for months! Any rough ETA on when we might see the sale? If you're not comfortable giving a date yet thats totally understandable.

They'll be ready when I'm done. I can't give solid dates since my schedule is always changing (due to college n stuff)
Title: Re: [IC] - Ti switch tool finish
Post by: Pacifist on Mon, 21 April 2014, 23:01:16: If I miss this sale I'll be so pissed...
Title: Re: [IC] - Ti switch tool finish
Post by: Cottonsox on Mon, 21 April 2014, 23:03:07: Pretty sure I am going to miss it, moving soon and going to be awol a while. Someone snap me up a set! !
Title: Re: [IC] - Ti switch tool finish
Post by: quochung1989 on Tue, 22 April 2014, 02:37:02: I 'm in B with bent

First time, when i see OP, i thought that there isn't bent tool, just have flat tool. But after i read this thread, I think this is great sale :thumb:
I hope you 'll sale it on classified asap :D
Title: Re: [IC] - Ti switch tool finish
Post by: infiniti on Tue, 22 April 2014, 03:14:06: **SNIP*** RIP old image hosting
(http://www.boredbacon.com/the-geekiest-of-alphabets/)
Title: Re: [IC] - Ti switch tool finish
Post by: TLSC.wipeOut on Tue, 22 April 2014, 06:22:10: I like option B =)
Title: Re: [IC] - Ti switch tool finish
Post by: Crabby_b on Tue, 22 April 2014, 06:43:31: I would be in for option B.
Title: Re: [IC] - Ti switch tool finish
Post by: zflamewing on Tue, 22 April 2014, 08:01:01: I'd be in for a set of B bent as well.
Title: Re: [IC] - Ti switch tool finish
Post by: CPTBadAss on Tue, 22 April 2014, 08:03:08: B for Badass
Title: Re: [IC] - Ti switch tool finish
Post by: LechnerDE on Tue, 22 April 2014, 08:04:11: Quote from: The_Beast on Mon, 21 April 2014, 22:52:05
Quote from: strict on Mon, 21 April 2014, 22:50:58
Quote from: The_Beast on Mon, 21 April 2014, 22:37:10
I'm thinking everyone gets the majority option. I want these ready to ship once the sale is up

Show Image
(http://mashable.com/wp-content/uploads/2013/07/excited-baby.gif)

After missing out on the 420 sales I will be totally defeated if I miss out on these too, I've been looking forward to this for months! Any rough ETA on when we might see the sale? If you're not comfortable giving a date yet thats totally understandable.

They'll be ready when I'm done. I can't give solid dates since my schedule is always changing (due to college n stuff)

Will you do the sale in the Group Buy subforum?

I missed the last sale because it was in your thread in the classified section :(
Title: Re: [IC] - Ti switch tool finish
Post by: The_Beast on Tue, 22 April 2014, 08:05:45: Quote from: LechnerDE on Tue, 22 April 2014, 08:04:11
Quote from: The_Beast on Mon, 21 April 2014, 22:52:05
Quote from: strict on Mon, 21 April 2014, 22:50:58
Quote from: The_Beast on Mon, 21 April 2014, 22:37:10
I'm thinking everyone gets the majority option. I want these ready to ship once the sale is up

Show Image
(http://mashable.com/wp-content/uploads/2013/07/excited-baby.gif)

After missing out on the 420 sales I will be totally defeated if I miss out on these too, I've been looking forward to this for months! Any rough ETA on when we might see the sale? If you're not comfortable giving a date yet thats totally understandable.

They'll be ready when I'm done. I can't give solid dates since my schedule is always changing (due to college n stuff)

Will you do the sale in the Group Buy subforum?

I missed the last sale because it was in your thread in the classified section :(

More than likely classifieds again since I'm just outright selling them without collecting first.
Title: Re: [IC] - Ti switch tool finish
Post by: LechnerDE on Tue, 22 April 2014, 08:08:39: Thanks for the last reply!

Please announce the sale in this IC thread so I know when to look for it. Normally I don't browse the classifieds because most of the stuff is sold CONUS only...
Title: Re: [IC] - Ti switch tool finish
Post by: pichu23 on Tue, 22 April 2014, 19:11:18: I'm interested in the tools. I guess any finish would be fine for me. So majority wins :D
Title: Re: [IC] - Ti switch tool finish
Post by: Lastpilot on Tue, 22 April 2014, 19:12:53: B!
Title: Re: [IC] - Ti switch tool finish
Post by: exitfire401 on Tue, 22 April 2014, 19:13:50: Also gnona go with B with bent
Title: Re: [IC] - Ti switch tool finish
Post by: quake4mhg on Tue, 22 April 2014, 20:11:23: I missed switch tool GB few times before, I can't miss this one :)
If not too expensive, interested whichever you guys want.
Title: Re: [IC] - Ti switch tool finish
Post by: minho on Tue, 22 April 2014, 20:22:17: Quote from: quake4mhg on Tue, 22 April 2014, 20:11:23
I missed switch tool GB few times before, I can't miss this one :)
If not too expensive, interested whichever you guys want.

ditto
Title: Re: [IC] - Ti switch tool finish
Post by: ninjadoc on Tue, 22 April 2014, 20:58:41: B
Title: Re: [IC] - Ti switch tool finish
Post by: Vibex on Tue, 22 April 2014, 21:03:02: B
Title: Re: [IC] - Ti switch tool finish
Post by: FreeCopy on Wed, 23 April 2014, 09:22:07: B!
Title: Re: [IC] - Ti switch tool finish
Post by: SaySo on Wed, 23 April 2014, 09:31:35: Option B :thumb:
Title: Re: [IC] - Ti switch tool finish
Post by: Kfactork on Wed, 23 April 2014, 13:36:49: Option B looks good! ;D
Title: Re: [IC] - Ti switch tool finish
Post by: JaccoW on Wed, 23 April 2014, 14:07:56: I'm in for option B.

Could I reserve one?
Title: Re: [IC] - Ti switch tool finish
Post by: Zeal on Wed, 23 April 2014, 14:15:52: Any word on how many will be made? Lots of people on GH would be down to buy at least a pair of switch tools. It would be great if it became a staple item here. :-X
Title: Re: [IC] - Ti switch tool finish
Post by: strict on Wed, 23 April 2014, 14:27:21: Quote from: Zeal on Wed, 23 April 2014, 14:15:52
Any word on how many will be made? Lots of people on GH would be down to buy at least a pair of switch tools. It would be great if it became a staple item here. :-X

I believe in another thread The_Beast mentioned that 65 tools total were cut so Im going to guess ~35 sets will be produced. The people who ordered the 60% Ti plates got dibs on a set so the rest of us will probably see more like ~30 go up for sale.
Title: Re: [IC] - Ti switch tool finish
Post by: The_Beast on Wed, 23 April 2014, 16:27:29: Quote from: strict on Wed, 23 April 2014, 14:27:21
Quote from: Zeal on Wed, 23 April 2014, 14:15:52
Any word on how many will be made? Lots of people on GH would be down to buy at least a pair of switch tools. It would be great if it became a staple item here. :-X

I believe in another thread The_Beast mentioned that 65 tools total were cut so Im going to guess ~35 sets will be produced. The people who ordered the 60% Ti plates got dibs on a set so the rest of us will probably see more like ~30 go up for sale.

Exactly. If I sell out, I'll think about another SS round
Title: Re: [IC] - Ti switch tool finish
Post by: geniekid on Wed, 23 April 2014, 19:14:02: Quote from: The_Beast on Wed, 23 April 2014, 16:27:29
Quote from: strict on Wed, 23 April 2014, 14:27:21
Quote from: Zeal on Wed, 23 April 2014, 14:15:52
Any word on how many will be made? Lots of people on GH would be down to buy at least a pair of switch tools. It would be great if it became a staple item here. :-X

I believe in another thread The_Beast mentioned that 65 tools total were cut so Im going to guess ~35 sets will be produced. The people who ordered the 60% Ti plates got dibs on a set so the rest of us will probably see more like ~30 go up for sale.

Exactly. If I sell out, I'll think about another SS round

Thanks for this beast.
Title: Re: [IC] - Ti switch tool finish
Post by: CommonCurt on Wed, 23 April 2014, 22:53:37: Quote from: strict on Wed, 23 April 2014, 14:27:21
Quote from: Zeal on Wed, 23 April 2014, 14:15:52
Any word on how many will be made? Lots of people on GH would be down to buy at least a pair of switch tools. It would be great if it became a staple item here. :-X

I believe in another thread The_Beast mentioned that 65 tools total were cut so Im going to guess ~35 sets will be produced. The people who ordered the 60% Ti plates got dibs on a set so the rest of us will probably see more like ~30 go up for sale.

Only 30 sets? Gonna have to be quick to the draw.
Title: Re: [IC] - Ti switch tool finish
Post by: minho on Thu, 24 April 2014, 00:03:00: Quote from: The_Beast on Wed, 23 April 2014, 16:27:29
Quote from: strict on Wed, 23 April 2014, 14:27:21
Quote from: Zeal on Wed, 23 April 2014, 14:15:52
Any word on how many will be made? Lots of people on GH would be down to buy at least a pair of switch tools. It would be great if it became a staple item here. :-X

I believe in another thread The_Beast mentioned that 65 tools total were cut so Im going to guess ~35 sets will be produced. The people who ordered the 60% Ti plates got dibs on a set so the rest of us will probably see more like ~30 go up for sale.

Exactly. If I sell out, I'll think about another SS round

Sorry, what's SS mean?
Title: Re: [IC] - Ti switch tool finish
Post by: Pacifist on Thu, 24 April 2014, 00:05:26: Quote from: minho on Thu, 24 April 2014, 00:03:00
Quote from: The_Beast on Wed, 23 April 2014, 16:27:29
Quote from: strict on Wed, 23 April 2014, 14:27:21
Quote from: Zeal on Wed, 23 April 2014, 14:15:52
Any word on how many will be made? Lots of people on GH would be down to buy at least a pair of switch tools. It would be great if it became a staple item here. :-X

I believe in another thread The_Beast mentioned that 65 tools total were cut so Im going to guess ~35 sets will be produced. The people who ordered the 60% Ti plates got dibs on a set so the rest of us will probably see more like ~30 go up for sale.

Exactly. If I sell out, I'll think about another SS round

Sorry, what's SS mean?

stainles steel
Title: Re: [IC] - Ti switch tool finish
Post by: quochung1989 on Thu, 24 April 2014, 01:08:02: Oh i am very interested both titan & ss switch tool :p
Title: Re: [IC] - Ti switch tool finish
Post by: QuadGMoto on Mon, 12 May 2014, 20:00:11: B!
Title: Re: [IC] - Ti switch tool finish
Post by: minho on Mon, 12 May 2014, 20:45:56: Is this still projected to happen in a future date, or did I miss the thread?
Title: Re: [IC] - Ti switch tool finish
Post by: taylordcraig on Mon, 12 May 2014, 21:46:34: would love one set of B.
please and thank you.
dont let me miss this.
Title: Re: [IC] - Ti switch tool finish
Post by: PhineasRex on Sun, 25 May 2014, 09:39:45: "B" is the only option for me. Any estimate on when these will go on sale?
Title: Re: [IC] - Ti switch tool finish
Post by: promptcurry on Sun, 25 May 2014, 20:13:14: Option B for me. (if its still possible)
Title: Re: [IC] - Ti switch tool finish
Post by: minho on Wed, 28 May 2014, 18:08:04: Quote from: promptcurry on Sun, 25 May 2014, 20:13:14
Option B for me. (if its still possible)

Will this be going up anytime soon? (Sorry my intention isn't to rush this - just want to know whether or not I should start hunting around on classifieds or not).
Title: Re: [IC] - Ti switch tool finish
Post by: The_Beast on Wed, 28 May 2014, 19:27:41: Pretty much when I have time... no solid ETA
Title: Re: [IC] - Ti switch tool finish
Post by: minho on Wed, 28 May 2014, 22:36:20: Quote from: The_Beast on Wed, 28 May 2014, 19:27:41
Pretty much when I have time... no solid ETA

Okie dokie, thanks! :D
Title: Re: [IC] - Ti switch tool finish
Post by: quochung1989 on Thu, 29 May 2014, 02:42:27: Yeah i still wait it everyday :-X
Title: Re: [IC] - Ti switch tool finish
Post by: strict on Thu, 29 May 2014, 08:17:22: Quote from: quochung1989 on Thu, 29 May 2014, 02:42:27
Yeah i still wait it everyday :-X

I stay signed into GH on my phone with a browser tab always open to The_Beast's post history and check it all the time. I'm determined not to miss these when they go up for sale. :))
Title: Re: [IC] - Ti switch tool finish
Post by: feizor on Thu, 29 May 2014, 08:26:15: I'm up for one too if the price is right. How hard is it to open a switch without this tool?
Title: Re: [IC] - Ti switch tool finish
Post by: BlackDragonTribal on Thu, 29 May 2014, 10:15:14: Quote from: strict on Thu, 29 May 2014, 08:17:22
Quote from: quochung1989 on Thu, 29 May 2014, 02:42:27
Yeah i still wait it everyday :-X

I stay signed into GH on my phone with a browser tab always open to The_Beast's post history and check it all the time. I'm determined not to miss these when they go up for sale. :))

Yeah. I miss stainless steel switch tool. So i can't miss this tools :)

Quote from: feizor on Thu, 29 May 2014, 08:26:15
I'm up for one too if the price is right. How hard is it to open a switch without this tool?

You 'll know when you remove top housing switch on openable plate. I usually two tweezer curved, but it have more step to do that. After long time, you 'll feel tired & your act is not exactly. You 'll make copper plate curve....
Therefore i must be buy switch tools :(
Title: Re: [IC] - Ti switch tool finish
Post by: FrostyToast on Thu, 29 May 2014, 12:09:37: I would so be in for option B. I'm going to need something to open up my sprit keyboard.
Title: Re: [IC] - Ti switch tool finish
Post by: Crabby_b on Mon, 02 June 2014, 09:59:25: Any idea when this is going to be available?
Title: Re: [IC] - Ti switch tool finish
Post by: quochung1989 on Mon, 02 June 2014, 10:00:24: Quote from: Crabby_b on Mon, 02 June 2014, 09:59:25
Any idea when this is going to be available?
Nope. It is not available
Title: Re: [IC] - Ti switch tool finish
Post by: CPTBadAss on Mon, 02 June 2014, 10:07:33: Quote from: Crabby_b on Mon, 02 June 2014, 09:59:25
Any idea when this is going to be available?

Quote from: The_Beast on Wed, 28 May 2014, 19:27:41
Pretty much when I have time... no solid ETA
Title: Re: [IC] - Ti switch tool finish
Post by: Crabby_b on Mon, 02 June 2014, 10:11:03: Quote from: CPTBadAss on Mon, 02 June 2014, 10:07:33
Quote from: Crabby_b on Mon, 02 June 2014, 09:59:25
Any idea when this is going to be available?

Quote from: The_Beast on Wed, 28 May 2014, 19:27:41
Pretty much when I have time... no solid ETA

I guess reading through older posts would help... Thanks!
Title: Re: [IC] - Ti switch tool finish
Post by: Heliosphere on Sun, 15 June 2014, 01:57:26: Can these only be used to open pcb-mounted switches or would they work with plate mounted ones too?
Title: Re: [IC] - Ti switch tool finish
Post by: hwood34 on Sun, 15 June 2014, 02:05:31: Quote from: Heliosphere on Sun, 15 June 2014, 01:57:26
Can these only be used to open pcb-mounted switches or would they work with plate mounted ones too?
Depends on the type of plate
Title: Re: [IC] - Ti switch tool finish
Post by: Razor Lotus on Sun, 15 June 2014, 10:54:12: Quote from: Heliosphere on Sun, 15 June 2014, 01:57:26
Can these only be used to open pcb-mounted switches or would they work with plate mounted ones too?

You need the plate with special notches at the side of each switch slot to be able to use these switch tools on plate mounted switches
Title: Re: [IC] - Ti switch tool finish
Post by: The_Beast on Sat, 21 June 2014, 02:51:14: How about a sand blasted finish instead of a B finish?
(http://i.imgur.com/59B93Ck.jpg)

It has a slight grippyness to it.
Title: Re: [IC] - Ti switch tool finish
Post by: Cottonsox on Sat, 21 June 2014, 02:56:26: That would be cool also! I am in for whatever is made. Really need some seitch tools for my upcoming builds
Title: Re: [IC] - Ti switch tool finish
Post by: strict on Sat, 21 June 2014, 07:26:31: Sandblasted finish looks great. Honestly, I would probably chose that over anything else based simply on the fact you said it's easier to grip. When you're working with smaller tools and parts like these any little bit of extra grip really helps. If I get a set I was actually considering putting plasti-dip on the top part of the tool for that reason.
Title: Re: [IC] - Ti switch tool finish
Post by: quochung1989 on Sat, 21 June 2014, 08:12:18: Look it is great :thumb: Sanding layer is smooth. I only guess via photo :)
Title: Re: [IC] - Ti switch tool finish
Post by: Zeal on Sat, 21 June 2014, 08:15:54: I'm afraid sandblasted finish will scratch the inside tabs on an MX switch. :-X
Title: Re: [IC] - Ti switch tool finish
Post by: osi on Sat, 21 June 2014, 09:33:52: Not only are these tools good for switches but I use them to get into all kinds of things! Great addition to any tool set/bag!
Title: Re: [IC] - Ti switch tool finish
Post by: Razor Lotus on Sat, 21 June 2014, 10:34:46: So... when will they be made? lol
Title: Re: [IC] - Ti switch tool finish
Post by: FrostyToast on Sat, 21 June 2014, 16:02:04: I just want tools. Gimme tools! :p
Title: Re: [IC] - Ti switch tool finish
Post by: The_Beast on Sat, 28 June 2014, 08:26:56: Quote from: Zeal on Sat, 21 June 2014, 08:15:54
I'm afraid sandblasted finish will scratch the inside tabs on an MX switch. :-X

I blasted another one last night and tested them, I didn't see any indication of scratching.

That being said, the sale should be soon™
Title: Re: [IC] - Ti switch tool finish
Post by: strict on Sat, 28 June 2014, 08:38:04: Quote from: The_Beast on Sat, 28 June 2014, 08:26:56
That being said, the sale should be soon™

(https://i.imgur.com/DSBXVVk.gif)
Title: Re: [IC] - Ti switch tool finish
Post by: LechnerDE on Sat, 28 June 2014, 08:40:19: I hope I don't miss the sale!

again....

:p
Title: Re: [IC] - Ti switch tool finish
Post by: quochung1989 on Sat, 28 June 2014, 08:44:39: I hope that. Wait too long :(
Title: Re: [IC] - Ti switch tool finish
Post by: clacktalk on Sat, 19 July 2014, 16:29:39: I've heard wonderful things about these tools. I'm interested! I hope me posting here is cool haha
Title: Re: [IC] - Ti switch tool finish
Post by: The_Beast on Sat, 19 July 2014, 18:26:56: Some stuff came up, but I'm still working on them!

Right now, I have about 7 sets done.
Title: Re: [IC] - Ti switch tool finish
Post by: strict on Sat, 19 July 2014, 18:42:43: Quote from: The_Beast on Sat, 19 July 2014, 18:26:56
Some stuff came up, but I'm still working on them!

Right now, I have about 7 sets done.

Great news! Appreciate the hard work, Beast :thumb:
Title: Re: [IC] - Ti switch tool finish
Post by: FrostyToast on Sat, 19 July 2014, 18:48:26: Quote from: The_Beast on Sat, 19 July 2014, 18:26:56
Some stuff came up, but I'm still working on them!

Right now, I have about 7 sets done.

(http://www.reactiongifs.us/wp-content/uploads/2013/08/give_it_to_me_stephen_colbert.gif)
Title: Re: [IC] - Ti switch tool finish
Post by: heedpantsnow on Sat, 19 July 2014, 19:11:23: I could have sworn I said at some point "I'm in for a finished set" but now I can't find it. Is it too late? If not, I'm in.
Title: Re: [IC] - Ti switch tool finish
Post by: Flyersfan1 on Sat, 19 July 2014, 19:20:02: Quote from: heedpantsnow on Sat, 19 July 2014, 19:11:23
I could have sworn I said at some point "I'm in for a finished set" but now I can't find it. Is it too late? If not, I'm in.
If memory serves, I believe it's going to be a first come first serve sale, nothing you have to reserve a spot for.
Title: Re: [IC] - Ti switch tool finish
Post by: The_Beast on Sat, 19 July 2014, 19:33:42: Quote from: Flyersfan1 on Sat, 19 July 2014, 19:20:02
Quote from: heedpantsnow on Sat, 19 July 2014, 19:11:23
I could have sworn I said at some point "I'm in for a finished set" but now I can't find it. Is it too late? If not, I'm in.
If memory serves, I believe it's going to be a first come first serve sale, nothing you have to reserve a spot for.

Yes, however, if you participated in the ti plate buy I ran, they DO get preference since I wasn't able to get these done at the same time as their plates.

Other than that, first come first serve
Title: Re: [IC] - Ti switch tool finish
Post by: Heliosphere on Sun, 20 July 2014, 00:24:07: Same, I want one!
Title: Re: [IC] - Ti switch tool finish
Post by: CommonCurt on Sun, 20 July 2014, 01:38:44: I had almost forgotten about these. I still am definitely interested.
Title: Re: [IC] - Ti switch tool finish
Post by: querolous on Thu, 24 July 2014, 03:29:25: I am interested in a set
Title: Re: [IC] - Ti switch tool finish
Post by: JaccoW on Thu, 24 July 2014, 04:32:03: Still interested as well :D
Title: Re: [IC] - Ti switch tool finish
Post by: The_Beast on Sat, 26 July 2014, 19:50:39: 34 done, 26 to go

(http://i.imgur.com/iTuXClS.jpg)
Title: Re: [IC] - Ti switch tool finish
Post by: FrostyToast on Sat, 26 July 2014, 19:54:24: I am going to watch this thread like a hawk for when you start to sell those... Or rather I will watch like a sleepy hawk who likes to take rests often and occasionally eat and forgetting about things that need watching... :rolleyes:
Title: Re: [IC] - Ti switch tool finish
Post by: The_Beast on Sat, 26 July 2014, 19:55:48: Quote from: FrostyToast on Sat, 26 July 2014, 19:54:24
I am going to watch this thread like a hawk for when you start to sell those... Or rather I will watch like a sleepy hawk who likes to take rests often and occasionally eat and forgetting about things that need watching... :rolleyes:

Hawks are cool, but sloths are cooler....
Title: Re: [IC] - Ti switch tool finish
Post by: Flyersfan1 on Sat, 26 July 2014, 19:56:51: Quote from: The_Beast on Sat, 26 July 2014, 19:55:48
Quote from: FrostyToast on Sat, 26 July 2014, 19:54:24
I am going to watch this thread like a hawk for when you start to sell those... Or rather I will watch like a sleepy hawk who likes to take rests often and occasionally eat and forgetting about things that need watching... :rolleyes:

Hawks are cool, but sloths are cooler....
Looking great Beast! :thumb:
Title: Re: [IC] - Ti switch tool finish
Post by: asdfjkl36 on Sat, 26 July 2014, 19:57:55: Quote from: The_Beast on Sat, 26 July 2014, 19:55:48
Quote from: FrostyToast on Sat, 26 July 2014, 19:54:24
I am going to watch this thread like a hawk for when you start to sell those... Or rather I will watch like a sleepy hawk who likes to take rests often and occasionally eat and forgetting about things that need watching... :rolleyes:

Hawks are cool, but sloths are cooler....

So the last person to say they want one is actually the first on the list. Got it :cool:
Title: Re: [IC] - Ti switch tool finish
Post by: strict on Sat, 26 July 2014, 20:00:35: Quote from: The_Beast on Sat, 26 July 2014, 19:50:39
34 done, 26 to go

Show Image
(http://i.imgur.com/iTuXClS.jpg)

(http://cdn04.cdn.socialitelife.com/wp-content/uploads/2013/07/11/tumblr_mc3hg5VpQP1qcy0p7o1_500.gif)

My biggest fear in life right now is that I will miss the glorious moment when these go on sale.
Title: Re: [IC] - Ti switch tool finish
Post by: clacktalk on Sat, 26 July 2014, 20:01:52: Quote from: The_Beast on Sat, 26 July 2014, 19:50:39
34 done, 26 to go

Show Image
(http://i.imgur.com/iTuXClS.jpg)

Taylor Swift's You Belong With Me plays in my head when I gaze at these.
Title: Re: [IC] - Ti switch tool finish
Post by: FrostyToast on Sat, 26 July 2014, 20:01:57: Quote from: The_Beast on Sat, 26 July 2014, 19:55:48
Quote from: FrostyToast on Sat, 26 July 2014, 19:54:24
I am going to watch this thread like a hawk for when you start to sell those... Or rather I will watch like a sleepy hawk who likes to take rests often and occasionally eat and forgetting about things that need watching... :rolleyes:

Hawks are cool, but sloths are cooler....

So you're saying you want a slo fi for those switch tools? You drive a hard bargain...
Title: Re: [IC] - Ti switch tool finish
Post by: JaccoW on Sat, 26 July 2014, 20:43:56: (http://i.imgur.com/MMmVYvE.gif)
Scary sloth is coming for your switch tools
:D
Title: Re: [IC] - Ti switch tool finish
Post by: fatchoi on Sat, 26 July 2014, 22:37:28: Quote from: The_Beast on Sat, 26 July 2014, 19:50:39
34 done, 26 to go

Show Image
(http://i.imgur.com/iTuXClS.jpg)

Argh, I want it. Is there a pre order list to subscribe to please? :P

Edit: just saw its a first come first serve
Title: Re: [IC] - Ti switch tool finish
Post by: Smasher816 on Sat, 26 July 2014, 22:50:18: Quote from: fatchoi on Sat, 26 July 2014, 22:37:28
Quote from: The_Beast on Sat, 26 July 2014, 19:50:39
34 done, 26 to go

Show Image
(http://i.imgur.com/iTuXClS.jpg)

Argh, I want it. Is there a pre order list to subscribe to please? :P

^ what he said
Title: Re: [IC] - Ti switch tool finish
Post by: quake4mhg on Sun, 27 July 2014, 01:12:44: Could I pay first? ;D
Title: Re: [IC] - Ti switch tool finish
Post by: DavinDidIt on Sun, 27 July 2014, 12:01:09: Count me in!
Title: Re: [IC] - Ti switch tool finish
Post by: GSimon on Sun, 27 July 2014, 20:58:57: I would like one also (hand sanded) please
Title: Re: [IC] - Ti switch tool finish
Post by: zennasyndroxx on Sun, 27 July 2014, 22:00:48: Hope I could get this. My plate just came and I need this!
Title: Re: [IC] - Ti switch tool finish
Post by: Blackehart on Mon, 28 July 2014, 13:30:58: Would definitely like to get one of these!
Title: Re: [IC] - Ti switch tool finish
Post by: awong on Mon, 28 July 2014, 13:32:07: Me likey ;D
Title: Re: [IC] - Ti switch tool finish
Post by: ninjadoc on Mon, 28 July 2014, 13:33:11: I would like a set too! :)
Title: Re: [IC] - Ti switch tool finish
Post by: BlackDragonTribal on Thu, 31 July 2014, 00:44:51: can you notice time to sell before several days?
Title: Re: [IC] - Ti switch tool finish
Post by: The_Beast on Fri, 01 August 2014, 16:34:04: Other 24 are done, so a sale should be soon