Author Topic: (WTT) OTD Blanket, Chiller Blue KWK Blank (Read 74852 times)

billnye · « **Reply #300 on:** Sat, 02 May 2015, 16:28:28 »

Quote from: jonathanyu on Sat, 02 May 2015, 16:17:08

phone screen situation: Bad
what happen to it

It was some bull**** man.

I was pulling it out of my pocket and it fell in some sand and the whole screen cracked.....

Signature · « **Reply #301 on:** Sun, 03 May 2015, 07:55:49 »

get g80-3700

Use for 5 min

sell g80-3700

billnye · « **Reply #302 on:** Sun, 03 May 2015, 08:12:39 »

Quote from: Signature on Sun, 03 May 2015, 07:55:49

get g80-3700

Use for 5 min

sell g80-3700

It's a different one. I needed a 3700 HQAUS for the ps2 cable. I'm selling a 3700 HAU I had from before

sethk_ · « **Reply #303 on:** Sun, 03 May 2015, 08:27:27 »

Quote from: billnye on Sun, 03 May 2015, 08:12:39

Quote from: Signature on Sun, 03 May 2015, 07:55:49
get g80-3700

Use for 5 min

sell g80-3700
It's a different one. I needed a 3700 HQAUS for the ps2 cable. I'm selling a 3700 HAU I had from before

What is the difference between the HQAUS and HAU?

billnye · « **Reply #304 on:** Sun, 03 May 2015, 09:47:18 »

Quote from: pwnnarwhal on Sun, 03 May 2015, 08:27:27

Quote from: billnye on Sun, 03 May 2015, 08:12:39

Quote from: Signature on Sun, 03 May 2015, 07:55:49
get g80-3700

Use for 5 min

sell g80-3700
It's a different one. I needed a 3700 HQAUS for the ps2 cable. I'm selling a 3700 HAU I had from before
What is the difference between the HQAUS and HAU?

HAU has a DIN connector and HQAUS is ps2.

hwood34 · « **Reply #305 on:** Fri, 29 May 2015, 19:53:49 »

just received my g80-5000, thanks!

meiosis · « **Reply #306 on:** Fri, 29 May 2015, 20:02:11 »

Thanks for the Corsa!

filphil · « **Reply #307 on:** Fri, 29 May 2015, 20:16:33 »

i have a leopold fc200 w/ mx blues I can let go for $60 plus shipping? It's just the bare board.

billnye · « **Reply #308 on:** Fri, 29 May 2015, 20:49:27 »

Quote from: filphil on Fri, 29 May 2015, 20:16:33

i have a leopold fc200 w/ mx blues I can let go for $60 plus shipping? It's just the bare board.

Is that the one with the off center spacebar placement? If it's normal I'd gladly buy it

CommonCurt · « **Reply #309 on:** Fri, 29 May 2015, 20:52:25 »

Quote from: billnye on Fri, 29 May 2015, 20:49:27

Quote from: filphil on Fri, 29 May 2015, 20:16:33
i have a leopold fc200 w/ mx blues I can let go for $60 plus shipping? It's just the bare board.
Is that the one with the off center spacebar placement? If it's normal I'd gladly buy it

The FC200 is the older model with the wacky spacebar placement.

filphil · « **Reply #310 on:** Fri, 29 May 2015, 20:55:12 »

Quote from: billnye on Fri, 29 May 2015, 20:49:27

Quote from: filphil on Fri, 29 May 2015, 20:16:33
i have a leopold fc200 w/ mx blues I can let go for $60 plus shipping? It's just the bare board.
Is that the one with the off center spacebar placement? If it's normal I'd gladly buy it

Quote from: CommonCurt on Fri, 29 May 2015, 20:52:25

Quote from: billnye on Fri, 29 May 2015, 20:49:27
Quote from: filphil on Fri, 29 May 2015, 20:16:33
i have a leopold fc200 w/ mx blues I can let go for $60 plus shipping? It's just the bare board.
Is that the one with the off center spacebar placement? If it's normal I'd gladly buy it

The FC200 is the older model with the wacky spacebar placement.

Here's a picture of the spacebar which is coincidentally the last remaining key I have of it. But that would explain why I still have it!

billnye · « **Reply #311 on:** Fri, 29 May 2015, 21:11:49 »

Quote from: filphil on Fri, 29 May 2015, 20:55:12

Quote from: billnye on Fri, 29 May 2015, 20:49:27
Quote from: filphil on Fri, 29 May 2015, 20:16:33
i have a leopold fc200 w/ mx blues I can let go for $60 plus shipping? It's just the bare board.
Is that the one with the off center spacebar placement? If it's normal I'd gladly buy it

Quote from: CommonCurt on Fri, 29 May 2015, 20:52:25
Quote from: billnye on Fri, 29 May 2015, 20:49:27
Quote from: filphil on Fri, 29 May 2015, 20:16:33
i have a leopold fc200 w/ mx blues I can let go for $60 plus shipping? It's just the bare board.
Is that the one with the off center spacebar placement? If it's normal I'd gladly buy it

The FC200 is the older model with the wacky spacebar placement.

Here's a picture of the spacebar which is coincidentally the last remaining key I have of it. But that would explain why I still have it!

Show Image

Oh alright. Thanks for the offer, but I'm gonna have to pass. I am planning on using some sets that won't have a spacebar that will work with this.

SpAmRaY · « **Reply #312 on:** Fri, 29 May 2015, 21:17:08 »

Is it just for pics? Or does it have to work?

billnye · « **Reply #313 on:** Fri, 29 May 2015, 21:18:04 »

Quote from: SpAmRaY on Fri, 29 May 2015, 21:17:08

Is it just for pics? Or does it have to work?

It has to work. I just want a keyboard to bring to work this summer that isn't too expensive. You have some broken TKLs laying around?

)

SpAmRaY · « **Reply #314 on:** Fri, 29 May 2015, 21:19:07 »

Quote from: billnye on Fri, 29 May 2015, 21:18:04

Quote from: SpAmRaY on Fri, 29 May 2015, 21:17:08
Is it just for pics? Or does it have to work?
It has to work. I just want a keyboard to bring to work this summer that isn't too expensive. You have some broken TKLs laying around? )

Just a phantom that isn't finished.

billnye · « **Reply #315 on:** Sun, 31 May 2015, 17:19:20 »

Beater board acquired!

Now looking for a G80-3000 pcb to work on for a summer project

HPE1000 · « **Reply #316 on:** Sun, 31 May 2015, 17:23:13 »

Quote from: billnye on Sun, 31 May 2015, 17:19:20

Beater board acquired!

Now looking for a G80-3000 pcb to work on for a summer project

Ditto. If u find 2 let me kno

(WKL)

sethk_ · « **Reply #317 on:** Mon, 01 June 2015, 14:42:01 »

Quote from: HPE1000 on Sun, 31 May 2015, 17:23:13

Quote from: billnye on Sun, 31 May 2015, 17:19:20
Beater board acquired!

Now looking for a G80-3000 pcb to work on for a summer project
Ditto. If u find 2 let me kno (WKL)

WKL PCB or case? I have an extra WKL case, because I don't think there is anything special about a WKL pcb

HPE1000 · « **Reply #318 on:** Mon, 01 June 2015, 15:12:28 »

Quote from: pwnnarwhal on Mon, 01 June 2015, 14:42:01

Quote from: HPE1000 on Sun, 31 May 2015, 17:23:13
Quote from: billnye on Sun, 31 May 2015, 17:19:20
Beater board acquired!

Now looking for a G80-3000 pcb to work on for a summer project
Ditto. If u find 2 let me kno (WKL)

WKL PCB or case? I have an extra WKL case, because I don't think there is anything special about a WKL pcb

PCB. I just said wkl because there are g80 3000s that are not wkl (although they are newer afaik)

billnye · « **Reply #319 on:** Mon, 01 June 2015, 17:07:29 »

BEATER DREAM IS BACK

HPE1000 · « **Reply #320 on:** Mon, 01 June 2015, 17:21:25 »

Quote from: billnye on Mon, 01 June 2015, 17:07:29

BEATER DREAM IS BACK

Show Image

niiiiiiiice

azhdar · « **Reply #321 on:** Tue, 02 June 2015, 02:21:24 »

billnye · « **Reply #322 on:** Tue, 02 June 2015, 10:47:16 »

Quote from: azhdar on Tue, 02 June 2015, 02:21:24

pm'd

Sorry I'm not looking for a qfr. Costar stabs are icky

billnye · « **Reply #323 on:** Tue, 02 June 2015, 19:39:42 »

nickheller · « **Reply #324 on:** Tue, 02 June 2015, 19:56:37 »

I have a KUL ES 87 with cherry browns, last week i spilled a soda on my desk and some went underneath the keyboard and touched to pcb, it still works, but on some usb ports on my computer the volume and media controls act as if you never let either the fn, or the volume key back up, and on others it work 100% fine. I have cleaned the PCB once, but only had 70% rubbing alcohol, I am going to give it a go again with 99% and see if that solves this issue. If it does, I'd be willing to sell it pretty cheap.

billnye · « **Reply #325 on:** Tue, 02 June 2015, 19:59:44 »

Quote from: nickheller on Tue, 02 June 2015, 19:56:37

I have a KUL ES 87 with cherry browns, last week i spilled a soda on my desk and some went underneath the keyboard and touched to pcb, it still works, but on some usb ports on my computer the volume and media controls act as if you never let either the fn, or the volume key back up, and on others it work 100% fine. I have cleaned the PCB once, but only had 70% rubbing alcohol, I am going to give it a go again with 99% and see if that solves this issue. If it does, I'd be willing to sell it pretty cheap.

If that fixes it I'll definitely buy it! Let me know

nickheller · « **Reply #326 on:** Tue, 02 June 2015, 20:00:53 »

Quote from: billnye on Tue, 02 June 2015, 19:59:44

Quote from: nickheller on Tue, 02 June 2015, 19:56:37
I have a KUL ES 87 with cherry browns, last week i spilled a soda on my desk and some went underneath the keyboard and touched to pcb, it still works, but on some usb ports on my computer the volume and media controls act as if you never let either the fn, or the volume key back up, and on others it work 100% fine. I have cleaned the PCB once, but only had 70% rubbing alcohol, I am going to give it a go again with 99% and see if that solves this issue. If it does, I'd be willing to sell it pretty cheap.
If that fixes it I'll definitely buy it! Let me know

Alright, I am more than likely going to try sometime this week, I gotta go buy some Q tips so I can get in tighter places than I can with a micro fiber.

billnye · « **Reply #327 on:** Wed, 03 June 2015, 20:40:06 »

jonathanyu · « **Reply #328 on:** Wed, 03 June 2015, 22:31:04 »

Quote from: billnye on Tue, 02 June 2015, 19:39:42

Show Image

what are these

billnye · « **Reply #329 on:** Fri, 05 June 2015, 16:15:05 »

Quote from: jonathanyu on Wed, 03 June 2015, 22:31:04

Quote from: billnye on Tue, 02 June 2015, 19:39:42
Show Image

what are these

Updated with new item

iamtootallforthis · « **Reply #330 on:** Fri, 05 June 2015, 16:57:15 »

Would you sell the HHKB case on its own?

billnye · « **Reply #331 on:** Fri, 05 June 2015, 17:08:39 »

Quote from: iamtootallforthis on Fri, 05 June 2015, 16:57:15

Would you sell the HHKB case on its own?

Only if someone is interested in buying the HHKB without the case.

iamtootallforthis · « **Reply #332 on:** Fri, 05 June 2015, 17:15:17 »

Quote from: billnye on Fri, 05 June 2015, 17:08:39

Quote from: iamtootallforthis on Fri, 05 June 2015, 16:57:15
Would you sell the HHKB case on its own?
Only if someone is interested in buying the HHKB without the case.

Hypothetically, how much would the case be by itself?

billnye · « **Reply #333 on:** Fri, 05 June 2015, 17:20:22 »

Quote from: iamtootallforthis on Fri, 05 June 2015, 17:15:17

Quote from: billnye on Fri, 05 June 2015, 17:08:39
Quote from: iamtootallforthis on Fri, 05 June 2015, 16:57:15
Would you sell the HHKB case on its own?
Only if someone is interested in buying the HHKB without the case.

Hypothetically, how much would the case be by itself?

I probably would have sold it for about $35. Both board and case are sold now though.

billnye · « **Reply #334 on:** Sat, 20 June 2015, 14:41:32 »

beehatch · « **Reply #335 on:** Sat, 20 June 2015, 16:10:04 »

I seriously wish I still had my julycicle right about now *sigh

much luck for youuuu

billnye · « **Reply #336 on:** Sun, 21 June 2015, 16:46:22 »

billnye · « **Reply #337 on:** Wed, 24 June 2015, 22:28:26 »

billnye · « **Reply #338 on:** Sun, 13 September 2015, 12:48:25 »

billnye · « **Reply #339 on:** Wed, 04 November 2015, 14:51:44 »

bUmp

bonus pic of Accountancy building at Ole Miss

Lurch · « **Reply #340 on:** Wed, 04 November 2015, 14:56:38 »

billnye · « **Reply #341 on:** Wed, 04 November 2015, 14:56:54 »

Quote from: Lurch on Wed, 04 November 2015, 14:56:38

bill

brother lurch <3

jerue · « **Reply #342 on:** Wed, 04 November 2015, 15:02:04 »

Pm'd good sir

edit: I'll also take a CMYW set if it has a 1.25u shift too

ghostjuggernaut · « **Reply #343 on:** Wed, 04 November 2015, 15:05:12 »

I like your goal Bill.

Neo.X · « **Reply #344 on:** Wed, 04 November 2015, 15:41:01 »

VesperSAINT · « **Reply #345 on:** Wed, 04 November 2015, 15:44:53 »

UF > Ole Miss.

All I gotta say, m8.

billnye · « **Reply #346 on:** Wed, 04 November 2015, 15:55:55 »

Quote from: VesperSAINT on Wed, 04 November 2015, 15:44:53

UF > Ole Miss.

Show Image

All I gotta say, m8.

Ole Miss QB vs Florida QB

https://soundcloud.com/g5gi/chad-kelly

VesperSAINT · « **Reply #347 on:** Wed, 04 November 2015, 16:03:21 »

Quote from: billnye on Wed, 04 November 2015, 15:55:55

https://soundcloud.com/g5gi/chad-kelly

Good God... LOLOL.

ideus · « **Reply #348 on:** Wed, 04 November 2015, 16:38:55 »

PM for the OG Dolch.

billnye · « **Reply #349 on:** Wed, 04 November 2015, 16:54:15 »

All pending or sold currently.

News:

Author Topic: (WTT) OTD Blanket, Chiller Blue KWK Blank (Read 74852 times)