What happened to the website?

The Doyu shop displays some broken page with leather tools on the header image now:

https://shopkey.doyustudio.com/

Hi,
We're moving hosting to GCP but engineer ****ed up with database.
I've fixed it and the site, work now.
But we changed the theme, lot of image/text need to be replaced.
We're working on the new contents now

Speed is because of I turned cache server off when I'm testing web engine speed.
I'm working on how to make it faster even without cache server.

Hello, I have a DO60 v0.2 PCB and a Chiwi60 (bought second-hand) and got a nice custom plate for it based on the design in the OP. (https://gitlab.com/sennin32/chiwi60/blob/master/plate/output/drw_plate_ansi.dwg)
However, it seems to not fit at all. Here are some pictures:

More

Show Image

More

Show Image

Note: there is a switch in the Esc key position

And this is the plate file I made to compare to the original: https://cdn.discordapp.com/attachments/490585581328531506/532969696262225970/custom_chiwi60.dxf.

Hi,
I measured again.
Distance between switches is correct.
What's your's PCB's switch spaces @@?

Quote from: sennin32 on Thu, 31 January 2019, 02:46:57

Quote from: maartenwut on Wed, 23 January 2019, 16:30:05

Hello, I have a DO60 v0.2 PCB and a Chiwi60 (bought second-hand) and got a nice custom plate for it based on the design in the OP. (https://gitlab.com/sennin32/chiwi60/blob/master/plate/output/drw_plate_ansi.dwg)
However, it seems to not fit at all. Here are some pictures:

More

Show Image

More

Show Image

Note: there is a switch in the Esc key position

And this is the plate file I made to compare to the original: https://cdn.discordapp.com/attachments/490585581328531506/532969696262225970/custom_chiwi60.dxf.

Hi,
I measured again.
Distance between switches is correct.
What's your's PCB's switch spaces @@?

Probably not exactly 19.05mm. It's a pcb from you (DO60) so I think you would know.

Strange, it should fit.
The pic is back space?
I can see it very clear, could you give me more pic so I can see which position goes wrong?

Quote from: maartenwut on Thu, 31 January 2019, 02:45:47

Quote from: maartenwut on Wed, 23 January 2019, 16:30:05

Hello, I have a DO60 v0.2 PCB and a Chiwi60 (bought second-hand) and got a nice custom plate for it based on the design in the OP. (https://gitlab.com/sennin32/chiwi60/blob/master/plate/output/drw_plate_ansi.dwg)
However, it seems to not fit at all. Here are some pictures:

More

Show Image

More

Show Image

Note: there is a switch in the Esc key position

And this is the plate file I made to compare to the original: https://cdn.discordapp.com/attachments/490585581328531506/532969696262225970/custom_chiwi60.dxf.

No answer to this sennin?

sorry, it has to take a while to check this, can't do a quick reply.

I took some more pictures: https://imgur.com/a/zMegAo5

Only back space position has issue?
If there's only backspace.
Could you measure the distance of switch between the key has issue and the one of it's left?
Measure both PCB and plate.
it should be 19.05, see which one is not 19.05, should able to spot the issue.

The battery of my digital caliper is dead right now, so I did some testing with GMK keycaps. As you can see the gap between 0 and - is bigger than the other gaps, which means that the two keys are off. You can also see that the tab key is off, which I also had problems with. I have not tested any other keys. The switches used are new PCB mounted Gateron Blacks.

yea the backspace 1+1u switch holes are off. they measure around 19.2mm give or take I just tried building a custom board with a do60 and found this issue as well so I think I can confirm maartenwut that its the pcb, I'll try to get some pictures. sorta disappointed since I lasered some stuff to use the do60s I had lol.

Hi,
Yes I just confirmed that some of switches are a little off.
Some plates might not work.

could you send us a mail/msg?
see what we can do for that.