Is it possible to add a yarbo cable to the group buy?no yarbo will come later as one GB
When will colour samples come in?Shipping says tomorrow.
Sent from my SM-N910G using Tapatalk
I told myself I needed a black board again...but then I get another pink case. :-X
Pink is always the right option!
It can be built without the acrylic diffuser, right?
It can be built without the acrylic diffuser, right?Diffuser is just something add-on. You don't need it. Don't change anything. I do this just in case someone love light
It can be built without the acrylic diffuser, right?Diffuser is just something add-on. You don't need it. Don't change anything. I do this just in case someone love light
It can be built without the acrylic diffuser, right?Diffuser is just something add-on. You don't need it. Don't change anything. I do this just in case someone love light
Is the diffuser at the bottom, or where? I'm confused on where the diffuser would be present on the keyboard itself. Thanks for the clarification!
In the middle of top case and bottom case! thanks my friendIt can be built without the acrylic diffuser, right?Diffuser is just something add-on. You don't need it. Don't change anything. I do this just in case someone love light
Is the diffuser at the bottom, or where? I'm confused on where the diffuser would be present on the keyboard itself. Thanks for the clarification!
Is there any way to get JUST the case, and not the pcb etc? if so i am in!
In the middle of top case and bottom case! thanks my friendIt can be built without the acrylic diffuser, right?Diffuser is just something add-on. You don't need it. Don't change anything. I do this just in case someone love light
Is the diffuser at the bottom, or where? I'm confused on where the diffuser would be present on the keyboard itself. Thanks for the clarification!
Paid :thumb:
Is the gray going to be like iphone space gray or like titanium camp c225, either way probably going to be my color!More like camp.We use our own color.
Sent from the love gun.
Wow, I haven't seen you in a while.
Wow, I haven't seen you in a while.
I died. Came back from the dead. Real life. You know how it goes. Back to one board again. :rolleyes:
Also...I am struggling so hard with color choice here. I hope those samples make the decision easier. :'(
Blue-Gray is like camp c225 which we manufactured before.
Blue-Gray is like camp c225 which we manufactured before.
Is it like the "titanium" listed here:
https://geekhack.org/index.php?topic=81377.0
??
Submitted for black, could i change colors after samples come in?Yep,Color can be changed before anode.
Paypal fee: 0.5%($20 for one kit,)My bad . It's 5% sorry.
Imho 0.5% of $400 are $2.
Come on, be honest...how many of you got TWO of these boards? (Keep in mind, Revo said he wasn't going to make them again so this is the final group buy for it!) And what color? What switches did you have in mind? This shall be hyped for months! ;)
if you are located in the US or Canada, this will be the link people should use!
https://originative.co/products/revo-hhkb-rj-kit
Limit of 50!
Welp, I already paid the order to Raymond directly. Can I cancel my order there and do it via Originative? I imagine this would be easier on the customs etc too.
Quote
Welp, I already paid the order to Raymond directly. Can I cancel my order there and do it via Originative? I imagine this would be easier on the customs etc too.
Yep, PM me your paypal address and i will do a refund for you. No money lost. And you can order it via Originative.
if you are located in the US or Canada, this will be the link people should use!
https://originative.co/products/revo-hhkb-rj-kit
Limit of 50!
if you are located in the US or Canada, this will be the link people should use!
https://originative.co/products/revo-hhkb-rj-kit
Limit of 50!
if i am planning on waiting a week to order and you happen to get 50 orders before i can make mine, what should i do?
Just reordered on originative. :P Also got in the groupbuy for the cherry screw in stabs on Originative, can I cancel that should the 100 MOQ is reached?
PS: Saw 'Disclosure: There may be scratches on your screw holes :)' on the product page, is that satire or just due to testing? ;D
Just reordered on originative. :P Also got in the groupbuy for the cherry screw in stabs on Originative, can I cancel that should the 100 MOQ is reached?
PS: Saw 'Disclosure: There may be scratches on your screw holes :)' on the product page, is that satire or just due to testing? ;D
both!
As for the Cherry Screw In Stabs, the one from Revo is still being tested. They'll send me some samples. You guys can choose to cancel the screw in stabs order then (and it has to hit 100 orders).
What is the weight on this compared to Duck Viper? Can the weight be added to OP?
Sent from my Pixel XL using Tapatalk
Oh I wasn't asking about an extra weight. I meant what is the weight of this board? 1kg? 2?Oh,sorry It's around 1.6kg. That's may change a little bit.
Sent from my Pixel XL using Tapatalk
What is the weight on this compared to Duck Viper? Can the weight be added to OP?
Sent from my Pixel XL using Tapatalk
Sorry there will be no weight. Maybe next time
I thought this was the only time the HHKB was gonna be ran.
Does this mean there's hope for a Round 2 with a weight? :eek: I need!
QuoteI thought this was the only time the HHKB was gonna be ran.
Does this mean there's hope for a Round 2 with a weight? :eek: I need!
I mean next project. This is one time only. Only do this once and no more.
any link for Chinese buyers?Will come tomorrow at 20:00 Beijing time.
any link for Chinese buyers?南哥好!
QuoteI thought this was the only time the HHKB was gonna be ran.
Does this mean there's hope for a Round 2 with a weight? :eek: I need!
I mean next project. This is one time only. Only do this once and no more.
Darn! :'(
I can't wait to see the other color samples. The pink looks absolutely fantastic.
I wanted to go with Grey/Red Plate, but the Blue-Grey is screaming my name. Pink too.
What kind of switches do you prefer, Raymond?
any link for Chinese buyers?Will come tomorrow at 20:00 Beijing time.
I figure this is a stretch, there'll be no European distributor type deal correct? I'll probably end up having a friend of mine in the US build mine for me anyway so no big deal either way, I'm just curious.
Hopefully I can find a way to justify the cost before the buy ends, the board is beautiful and I'd hate to pass up on it. I'm "that guy" that has like 10 boards and 9 of them are black but I'm DEFINITELY getting pink here!
Have to wait till Wednesday before ordering from Oco, errgg. So many people are gunna get in before me.
Sent from my iPhone using Tapatalk
Oh, alright nice! My Japanese beige set is calling for the pink hhkb haha.Have to wait till Wednesday before ordering from Oco, errgg. So many people are gunna get in before me.
Sent from my iPhone using Tapatalk
I'll pack it and label it for Oco,so i think he just need to ship it once he get it.It will be quick.
Will we get the same custom packaging if we order from Oco?yes you do!same thing. his shipping pickup from me. And he will ship it to you guys.
Sent from my iPhone using Tapatalk
Does the case take any standard 60% pcb and plate?normal plate will do. Pcb should work. I have tried gh60 bface. Both work
Also any chance you have pics for all the available colors?Yep will show it soon.
Where will the included acrylic defuser go? Looks amazing!between top and bottom case.
Raymond, is this the blue-gray you were speaking of? https://geekhack.org/index.php?action=dlattach;topic=81377.0;attach=140604;image
So being in the US, will I HAVE to ask for a refund to repay on originative?It's better you ask me to refund you. Cause there are so many orders i can't find all American orders. I'll try to find your order now.No worries
MOQ is 50, it is not limited to 50, correct?
Also, curious about what people think of using polycarbonate plates instead of aluminum. What are people's thoughts on how it effects the sound/feel?
MOQ is 50, it is not limited to 50, correct?
Also, curious about what people think of using polycarbonate plates instead of aluminum. What are people's thoughts on how it effects the sound/feel?
MOQ is 50, it is not limited to 50, correct?
Also, curious about what people think of using polycarbonate plates instead of aluminum. What are people's thoughts on how it effects the sound/feel?
Is it Cheaper for US people to get from Oco?Yes.
There is no limit on this GB right?Nope.
What layouts to people like to use on hhkb like keyboards?
Trying to figure out how to manage modifiers.
What layouts to people like to use on hhkb like keyboards?
Trying to figure out how to manage modifiers.
Mirror the hhkb as close as possible. Split backspace and split right shift
One of the things that excites me most about this is that you can make multiple boards to use with it. There is not certain mount where you have to have certain PCB and plates. I will use this case for a long long time. May be a trueendgamemain stay for me. I want to get a gray but I know most keysets will go with black better so I went with that.
So excited about this Raymond! This is my first Keyboard GB.
One of the things that excites me most about this is that you can make multiple boards to use with it. There is not certain mount where you have to have certain PCB and plates. I will use this case for a long long time. May be a trueendgamemain stay for me. I want to get a gray but I know most keysets will go with black better so I went with that.
So excited about this Raymond! This is my first Keyboard GB.
if you are located in the US or Canada, this will be the link people should use!
https://originative.co/products/revo-hhkb-rj-kit
Limit of 50!
if i am planning on waiting a week to order and you happen to get 50 orders before i can make mine, what should i do?
I read the OP wrong. It's a MOQ of 50!
One of the things that excites me most about this is that you can make multiple boards to use with it. There is not certain mount where you have to have certain PCB and plates. I will use this case for a long long time. May be a trueendgamemain stay for me. I want to get a gray but I know most keysets will go with black better so I went with that.
So excited about this Raymond! This is my first Keyboard GB.
This is great logic. The case is compatible with other 60% plates though? The cutouts on the bottom row won't get in the way? If not, having a few PCB, swtich, plate sandwiches laying around to throw in this thing would be delicious.
One of the things that excites me most about this is that you can make multiple boards to use with it. There is not certain mount where you have to have certain PCB and plates. I will use this case for a long long time. May be a trueendgamemain stay for me. I want to get a gray but I know most keysets will go with black better so I went with that.
So excited about this Raymond! This is my first Keyboard GB.
This is great logic. The case is compatible with other 60% plates though? The cutouts on the bottom row won't get in the way? If not, having a few PCB, swtich, plate sandwiches laying around to throw in this thing would be delicious.
I THINK. Looking at the screw location, it seems to be standard Poker screw whole.
Can you confirm Raymond?
Its tray mount so no issues with the blockers! Any 60 plate should work.One of the things that excites me most about this is that you can make multiple boards to use with it. There is not certain mount where you have to have certain PCB and plates. I will use this case for a long long time. May be a trueendgamemain stay for me. I want to get a gray but I know most keysets will go with black better so I went with that.
So excited about this Raymond! This is my first Keyboard GB.
This is great logic. The case is compatible with other 60% plates though? The cutouts on the bottom row won't get in the way? If not, having a few PCB, swtich, plate sandwiches laying around to throw in this thing would be delicious.
I cannot join this groupbuy but I want to wish this GB good luck and swift deliveries.
Nice work RevoTeam!
I THINK. Looking at the screw location, it seems to be standard Poker screw whole.
Can you confirm Raymond?
looks outstandingThank you sir. Have a good one :thumb:
have a fantastic buy
Quote
I THINK. Looking at the screw location, it seems to be standard Poker screw whole.
Can you confirm Raymond?
I think it is. But what kind of Pcb you want to use? I mean it's fixed on the spacebar row.Nothing can be changed there. Can't really get a poker inside of this baby.
Ideally a zeal 60 pcb is the plan :P
Just invoiced everyone who filled in the form. If you are ordering from originative,you can just ignore it.
BTW,The PCB is a custom made. ESC led will face north,and the rest of the leds will face south. This way,it's better for resin keycaps you put in the ESC spot.
Just invoiced everyone who filled in the form. If you are ordering from originative,you can just ignore it.Thank god for south facing leds.
BTW,The PCB is a custom made. ESC led will face north,and the rest of the leds will face south. This way,it's better for resin keycaps you put in the ESC spot.
Just invoiced everyone who filled in the form. If you are ordering from originative,you can just ignore it.
BTW,The PCB is a custom made. ESC led will face north,and the rest of the leds will face south. This way,it's better for resin keycaps you put in the ESC spot.
Sounds good - with the current LED orientation gmk caps can be used right?
I have a couple more q's --The diffuser is removable as per discussion in the IC thread/here. :) Personally I'm probably going to go with a non-diffuser build.
What color will the pcb be?
Is the diffuser removable, or is is necessary to have it in for the case to work properly?
I have a couple more q's --You don't have to use diffuser. For the pcb the color is black/gold
What color will the pcb be?
Is the diffuser removable, or is is necessary to have it in for the case to work properly?
I have a couple more q's --You don't have to use diffuser. For the pcb the color is black/gold
What color will the pcb be?
Is the diffuser removable, or is is necessary to have it in for the case to work properly?
Thanks! I know the IC and GB threads have been moving fast lately; I must have missed it. You could always pick up a LeandreN plate... :DDamn, a black/gold PCB would look great when paired with the black option. Just wishing there was a black aluminum version for the plate too now for the all-black look ;DI have a couple more q's --You don't have to use diffuser. For the pcb the color is black/gold
What color will the pcb be?
Is the diffuser removable, or is is necessary to have it in for the case to work properly?
I have a couple more q's --You don't have to use diffuser. For the pcb the color is black/gold
What color will the pcb be?
Is the diffuser removable, or is is necessary to have it in for the case to work properly?
Damn, a black/gold PCB would look great when paired with the black option. Just wishing there was a black aluminum version for the plate too now for the all-black look ;D
Quote
I THINK. Looking at the screw location, it seems to be standard Poker screw whole.
Can you confirm Raymond?
I think it is. But what kind of Pcb you want to use? I mean it's fixed on the spacebar row.Nothing can be changed there. Can't really get a poker inside of this baby.
Yep, if that's a hhkb-like layout. it has to be 1 1.5 7 1.5 1 on the spacebar row.
Not wanting to use a Poker. I have a GH60 with a SS plate that I will most likely use until I can get my full kit built.
I have a couple more q's --You don't have to use diffuser. For the pcb the color is black/gold
What color will the pcb be?
Is the diffuser removable, or is is necessary to have it in for the case to work properly?
Damn, a black/gold PCB would look great when paired with the black option. Just wishing there was a black aluminum version for the plate too now for the all-black look ;D
If I am understanding right, you can use most plates with this case right?
Is the grey colour the same as the camp c225 titanium?I asked him earlier and he said it would be about the same.
Is the grey colour the same as the camp c225 titanium?Yep,it's almost the same.
Hi guy since this is tray mount. You guys don't necessarily need a plate. Any PCB like GH60 will work in this. So PCB is something easily replaced.Just out of curiousity: why did you go with tray mount? Some folks over on reddit say that it would have been better to choose something similar like a Duck Viper, because tray mount feels very rigid and not that good.
Just out of curiousity: why did you go with tray mount? Some folks over on reddit say that it would have been better to choose something similar like a Duck Viper, because tray mount feels very rigid and not that good.
Who's getting a red plate?! Can't decide which color combos to go with...Personally, i think silver plate can't be wrong with anything. Red plate also great. That's why i am this two colors.
Hopefully there's more photos soon! ;DI am waiting for delivery,man. But my photo taking skill just so bad. My friend always say that they lose their desire to buy the stuff by looking at the photo i take for the product.
What if I already have a pcb, plate, stabs, etc... And I just want the top and bottom case parts?
Just ordered my pink one, phew that was a chunk of change. Super excited though :D
Sent from my iPhone using Tapatalk
Alright everyone... I am in for a black but I kind of want a gray. Financially, this will be my last board for the year and I will pair it with my last keyset for the year.. GMK Terminal.
What are your opinions on Black vs Gray case for GMK Terminal? I have always wanted a gray case but black is more safe.
Alright everyone... I am in for a black but I kind of want a gray. Financially, this will be my last board for the year and I will pair it with my last keyset for the year.. GMK Terminal.
What are your opinions on Black vs Gray case for GMK Terminal? I have always wanted a gray case but black is more safe.
Alright everyone... I am in for a black but I kind of want a gray. Financially, this will be my last board for the year and I will pair it with my last keyset for the year.. GMK Terminal.
What are your opinions on Black vs Gray case for GMK Terminal? I have always wanted a gray case but black is more safe.
It's hard to go wrong with black. Pairs well with nearly everything. Having a black board for your rotation is great and something I am sorely missing...definitely considering switching from the pink...
But pink is so <3
Have we hit moq yet?Yes,we have. No need to worries about that now.
Sent from my iPhone using Tapatalk
That was fast haha.Have we hit moq yet?Yes,we have. No need to worries about that now.
Sent from my iPhone using Tapatalk
Can you post more pictures with the all available colours?I am working on that now, hopefully i can post some more pictures today.
That was fast haha.
Sent from my iPhone using Tapatalk
Yes,we have. No need to worries about that now.
Pink can pair with beige set(as you can see in the picture). Or any Valentine set. It's not black which can pair with anything but it's not that hard. ;D ;D ;D
I'm just worried about picking the right color and matching it with a keyset. :))
Pink can pair with beige set(as you can see in the picture). Or any Valentine set. It's not black which can pair with anything but it's not that hard. ;D ;D ;D
How far are we from the MOQ for the free stabs?QuoteThat was fast haha.
Sent from my iPhone using Tapatalk
I am counting 20 orders from China. Still it's pretty fast for me. Maybe it'll be faster if i put a limit on this. :D :D
Pink can pair with beige set(as you can see in the picture). Or any Valentine set. It's not black which can pair with anything but it's not that hard. ;D ;D ;D
My pink LZ right now is paired with Valentine. :p I'm sure I will find something I love. :thumb:
How far are we from the MOQ for the free stabs?QuoteThat was fast haha.
Sent from my iPhone using Tapatalk
I am counting 20 orders from China. Still it's pretty fast for me. Maybe it'll be faster if i put a limit on this. :D :D
How far are we from the MOQ for the free stabs?QuoteThat was fast haha.
Sent from my iPhone using Tapatalk
That is great progress! 50 units in 3 days right?
I am counting 20 orders from China. Still it's pretty fast for me. Maybe it'll be faster if i put a limit on this. :D :D
We just met our MOQ so it's like we just half-way there. This GB is still young,i suppose we can hit 100 and get free stabs.Just need some patient.
Just got delivery for the color samplePastel blue and pink look niceee
This is a rough picture with no ps or any filter,the real stuff is much better.
(Attachment Link)
Just give you guys some idea of what the color will be.
It will have a slight difference between this and the keyboard due to the different thickness.It's hard noticeable.
The blue-gray will have more gray in it. This sample just too thin.Just got delivery for the color samplePastel blue and pink look niceee
This is a rough picture with no ps or any filter,the real stuff is much better.
(Attachment Link)
Just give you guys some idea of what the color will be.
It will have a slight difference between this and the keyboard due to the different thickness.It's hard noticeable.
Sent from my iPhone using Tapatalk
Silver or black? I can't decide 😣Both fine. you can flip a coin or buy two sets.haha ;D ;D
:eek: That blue-gray is super nice! I might have to get one now...Yeah,let's go! :thumb: :thumb: :thumb:
I'm curious as to what the most popular to least popular colors ordered are gonna be :)
I'm curious as to what the most popular to least popular colors ordered are gonna be :)
Pink and Black for most popular. I bet gray or blu-gray on least.
From the google form. Black and Blue-Gray are the most popular color for now.
I'm curious as to what the most popular to least popular colors ordered are gonna be :)
Pink and Black for most popular. I bet gray or blu-gray on least.From the google form. Black and Blue-Gray are the most popular color for now.
I just ordered Gray paired with a Silver plate. Maybe I'll change my mind when more pics come out though haha. :thumb:
Alright everyone... I am in for a black but I kind of want a gray. Financially, this will be my last board for the year and I will pair it with my last keyset for the year.. GMK Terminal.Black.
What are your opinions on Black vs Gray case for GMK Terminal? I have always wanted a gray case but black is more safe.
So, just to clarify: it won't be possible to buy just the case on its own without all the extra stuff to it? I think I'd join the GB if I could acquire the case solely.
So, just to clarify: it won't be possible to buy just the case on its own without all the extra stuff to it? I think I'd join the GB if I could acquire the case solely.
Because we made our own PCB. So the pcb is not worth much to us. Plate actually comes free,factory charge case and plate as a whole. If you don't want them and get something like $10 off, it's like nothing. So i don't give options with no PCB. You can sell the PCB and make more money.I know many people want to take a second PCB.
So, just to clarify: it won't be possible to buy just the case on its own without all the extra stuff to it? I think I'd join the GB if I could acquire the case solely.
Because we made our own PCB. So the pcb is not worth much to us. Plate actually comes free,factory charge case and plate as a whole. If you don't want them and get something like $10 off, it's like nothing. So i don't give options with no PCB. You can sell the PCB and make more money.I know many people want to take a second PCB.
I think i might be one who wants a second pcb. I have been planning on getting 2 black kits, but maybe getting only one and swapping the pcbs is a better idea for my wallet...
I joinged the drop of the Revo Keypad recently (https://www.massdrop.com/buy/revo-design-custom-cnc-aluminum-keypad/).a lot of times I think people overreact over minor defects and scratches... but that truly looks like ****. definitely not acceptable
Received it yesterday and I am disappointed by the lack of quality control. My top half is of a different shade of color than the bottom, some scratches and completely uneven finish all around. Pics: http://imgur.com/a/10QDg
According to massdrop there is no warranty issued by Revo, so I wont be able to receive a replacement. I just wanted to post this as a warning to everyone looking into this GB.
I joinged the drop of the Revo Keypad recently (https://www.massdrop.com/buy/revo-design-custom-cnc-aluminum-keypad/).
Received it yesterday and I am disappointed by the lack of quality control. My top half is of a different shade of color than the bottom, some scratches and completely uneven finish all around. Pics: http://imgur.com/a/10QDg
According to massdrop there is no warranty issued by Revo, so I wont be able to receive a replacement. I just wanted to post this as a warning to everyone looking into this GB.
I joinged the drop of the Revo Keypad recently (https://www.massdrop.com/buy/revo-design-custom-cnc-aluminum-keypad/).
Received it yesterday and I am disappointed by the lack of quality control. My top half is of a different shade of color than the bottom, some scratches and completely uneven finish all around. Pics: http://imgur.com/a/10QDg
According to massdrop there is no warranty issued by Revo, so I wont be able to receive a replacement. I just wanted to post this as a warning to everyone looking into this GB.
I joinged the drop of the Revo Keypad recently (https://www.massdrop.com/buy/revo-design-custom-cnc-aluminum-keypad/).a lot of times I think people overreact over minor defects and scratches... but that truly looks like ****. definitely not acceptable
Received it yesterday and I am disappointed by the lack of quality control. My top half is of a different shade of color than the bottom, some scratches and completely uneven finish all around. Pics: http://imgur.com/a/10QDg
According to massdrop there is no warranty issued by Revo, so I wont be able to receive a replacement. I just wanted to post this as a warning to everyone looking into this GB.
No worries bro,i can replace it for you if you want. This could be my fault. I think it happened while i am packing it.Stuff like this can be replaced,no problem.I joinged the drop of the Revo Keypad recently (https://www.massdrop.com/buy/revo-design-custom-cnc-aluminum-keypad/).a lot of times I think people overreact over minor defects and scratches... but that truly looks like ****. definitely not acceptable
Received it yesterday and I am disappointed by the lack of quality control. My top half is of a different shade of color than the bottom, some scratches and completely uneven finish all around. Pics: http://imgur.com/a/10QDg
According to massdrop there is no warranty issued by Revo, so I wont be able to receive a replacement. I just wanted to post this as a warning to everyone looking into this GB.
Mine has an imperfection on the edge but otherwise came out perfect.
Images- http://imgur.com/a/amD6M (http://imgur.com/a/amD6M)
No worries bro,i can replace it for you if you want. This could be my fault. I think it happened while i am packing it.Stuff like this can be replaced,no problem.I joinged the drop of the Revo Keypad recently (https://www.massdrop.com/buy/revo-design-custom-cnc-aluminum-keypad/).a lot of times I think people overreact over minor defects and scratches... but that truly looks like ****. definitely not acceptable
Received it yesterday and I am disappointed by the lack of quality control. My top half is of a different shade of color than the bottom, some scratches and completely uneven finish all around. Pics: http://imgur.com/a/10QDg
According to massdrop there is no warranty issued by Revo, so I wont be able to receive a replacement. I just wanted to post this as a warning to everyone looking into this GB.
Mine has an imperfection on the edge but otherwise came out perfect.
Images- http://imgur.com/a/amD6M (http://imgur.com/a/amD6M)
No worries bro,i can replace it for you if you want. This could be my fault. I think it happened while i am packing it.Stuff like this can be replaced,no problem.I joinged the drop of the Revo Keypad recently (https://www.massdrop.com/buy/revo-design-custom-cnc-aluminum-keypad/).a lot of times I think people overreact over minor defects and scratches... but that truly looks like ****. definitely not acceptable
Received it yesterday and I am disappointed by the lack of quality control. My top half is of a different shade of color than the bottom, some scratches and completely uneven finish all around. Pics: http://imgur.com/a/10QDg
According to massdrop there is no warranty issued by Revo, so I wont be able to receive a replacement. I just wanted to post this as a warning to everyone looking into this GB.
Mine has an imperfection on the edge but otherwise came out perfect.
Images- http://imgur.com/a/amD6M (http://imgur.com/a/amD6M)
Man I got too many boards in gbs right now but Revos tkl looked great so this board should be just as amazing. Good luck to all involved.
Sent from my SM-G928V using Tapatalk
Alright... I switched my Black for Gray.
When an HHKB case FINALLY releases I will most likely get a black case so I wanted options.
Can we get a few more photos?[attachimg=1]
Perhaps different angles of a complete board?
Would be much appreciated!
So will it be possible to get Yarbos with this one like Dr D?Yarbo will be another GB in the future. It's all handmade so it cost time. And at this moment. We don't have time to do it.
Doubtful, but I figured I would ask haha. :p
So will it be possible to get Yarbos with this one like Dr D?Yarbo will be another GB in the future. It's all handmade so it cost time. And at this moment. We don't have time to do it.
Doubtful, but I figured I would ask haha. :p
Any chance we can get the height of the case at the front and back lips?
Any chance we can get the height of the case at the front and back lips?
Interested in this as well! I hope has relatively similar dimensions to my HHKB's!
Can we get a few more photos?(Attachment Link)
Perhaps different angles of a complete board?
Would be much appreciated!
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
Would this be enough,mate?I'll try to shot more pictures.
Any chance we can get the height of the case at the front and back lips?
Interested in this as well! I hope has relatively similar dimensions to my HHKB's!
Comparing to other higher end aluminum cases it will most likely be a bit taller. I have a silver case from TaoBao (not high end at all) and I HAVE to use a wrist rest with it.
if you are located in the US or Canada, this will be the link people should use!
https://originative.co/products/revo-hhkb-rj-kit
Limit of 50!
I have an order from Raymond, but I live in US, should I order through Sherry?
Welp, I already paid the order to Raymond directly. Can I cancel my order there and do it via Originative? I imagine this would be easier on the customs etc too.
if you are located in the US or Canada, this will be the link people should use!
https://originative.co/products/revo-hhkb-rj-kit
Limit of 50!
I have an order from Raymond, but I live in US, should I order through Sherry?
Welp, I already paid the order to Raymond directly. Can I cancel my order there and do it via Originative? I imagine this would be easier on the customs etc too.
Wondering how's the MOQ for the stabs going :))
Give me a pm about your invoice no or your paypal address and i can refund you. After that you can go order there. It will save you some shipping cost. :thumb: :thumb: :thumb:if you are located in the US or Canada, this will be the link people should use!
https://originative.co/products/revo-hhkb-rj-kit
Limit of 50!
I have an order from Raymond, but I live in US, should I order through Sherry?
Welp, I already paid the order to Raymond directly. Can I cancel my order there and do it via Originative? I imagine this would be easier on the customs etc too.
The angle should be the same as the HHKB! It looks great!
PS: If there's pics of the diffuser with it that would be awesome. :p
Wondering how's the MOQ for the stabs going :))
Wondering how's the MOQ for the stabs going :))
Stab is not coming. We need orders! There are some people told me they will order later so let worry about that next week. We still got a lot of time for this GB.
I'm really interested in the case. Does the BFace work on this board?
How does the diffuser work in this case?
I'm really interested in the case. Does the BFace work on this board?Judging by the mounting holes I'm assuming a b.face might not work with this doesn't hurt to verify tho
How does the diffuser work in this case?
I'm really interested in the case. Does the BFace work on this board?B.face will fit in perfectly.
How does the diffuser work in this case?
Will holtites fit on the pcb?I never seen these holtites. Let me check about this.
I'm really interested in the case. Does the BFace work on this board?B.face will fit in perfectly.
How does the diffuser work in this case?
Diffuser just fit in between top and bottom case as a whole.
Will there be any pics of the diffuser before the deadline?
Quote
Will there be any pics of the diffuser before the deadline?
I'll try my best to show some pics before deadline. I'll see what i can do :thumb: :thumb: :thumb:
Thanks! What PCB does it come with?
Hey Raymond! I'd like to change my order from silver with red plate to black with red plate.Yes, every change should pm me. please do that :D :D :D
Should I pm you?
Thanks! :)
Hey Raymond! I'd like to change my order from silver with red plate to black with red plate.Yes, every change should pm me. please do that :D :D :D
Should I pm you?
Thanks! :)
Last part arrived. Just take some quick pictures for you guys. No PS
(Attachment Link)
(Attachment Link)
(Attachment Link)
Damnnnn they look amazing! Are those the legs? (on the first photo, the silver knobs)
Edit: My bad, realized that's the center acrylic piece. Can we get a back pic (of the usb port side) too?
Thanks for the pic! It looks stunning!Quote
Damnnnn they look amazing! Are those the legs? (on the first photo, the silver knobs)
Edit: My bad, realized that's the center acrylic piece. Can we get a back pic (of the usb port side) too?
(Attachment Link)
I am just so terrible about this. Can't get a clean shot. :p :p :p
which led is suitable for a pink case?
thanks!which led is suitable for a pink case?
Moar pink.
I use white with my current pink case, though.
Yeah,i use that pcb for 2 years. never clean it. I plan to make a new one once i got my new RJ. This one needs go to washing machine. :thumb: :thumb: :thumb:Show Image(https://68.media.tumblr.com/c764060465ce57e24c061d6c70271770/tumblr_ofqunmQK911tq4of6o1_400.gif)
and revo clean your board :p
Is there a hole on the bottom (towards the right) for the PCB switches? Just wondering as some pictures I've seen in the forums have a rectangular cutout. Also, I think it would be better for you to post all the pictures on the first post too so that everyone can find them easily! ;DYes there will be. This is just to show you what is it like. Thanks for advice. It's a great idea. It will have a cutout as there are many pcbs using that part as a bootloader or something.
Yeah,i use that pcb for 2 years. never clean it. I plan to make a new one once i got my new RJ. This one needs go to washing machine. :thumb: :thumb: :thumb:
Last part arrived. Just take some quick pictures for you guys. No PS
(Attachment Link)
(Attachment Link)
(Attachment Link)
Yeah,i use that pcb for 2 years. never clean it. I plan to make a new one once i got my new RJ. This one needs go to washing machine. :thumb: :thumb: :thumb:
Haha, I'm just giving you a hard time. My current PCB is pretty dirty, too. I gotchu, bro.Show Image(http://i.imgur.com/jgfuNzm.gif)
Wow this really makes me want silver...
Any chance you have an HHKB for a side by side comparison?
Damnnnn they look amazing! Are those the legs? (on the first photo, the silver knobs)
Edit: My bad, realized that's the center acrylic piece. Can we get a back pic (of the usb port side) too?
Quote
Wow this really makes me want silver...
Any chance you have an HHKB for a side by side comparison?
Nah...i borrow it to my friend,so i don't have a topre HHKB right now.I can show you an old picture though.
(Attachment Link)
Alright I just submitted the order, the diffuser got me a boner.
How tall is the front of the case?
Silver with silver anyone?
When will we have to submit the shipping address? I'm in the midst of moving right now.
Oh boy that looks good... I'm conflicted about colors once again... :blank:
That's beautiful...If we can hit 100,all you need is a solder iron and switches. Maybe leds if you like it. It's actually not that hard,you can find some video on Youtube and then decide if it's too hard for you.
I am seriously thinking about submitting an order but have never built a keyboard before. This includes all you need except solder kit and switches right?
Mannn... so many glorious keyboards around here... I am really a sucker for that thin diffused LED line..
That's beautiful...If we can hit 100,all you need is a solder iron and switches. Maybe leds if you like it. It's actually not that hard,you can find some video on Youtube and then decide if it's too hard for you.
I am seriously thinking about submitting an order but have never built a keyboard before. This includes all you need except solder kit and switches right?
Mannn... so many glorious keyboards around here... I am really a sucker for that thin diffused LED line..
But once you start building keyboards,it may not be easy to stop.Haha :thumb: :thumb:
That's beautiful...If we can hit 100,all you need is a solder iron and switches. Maybe leds if you like it. It's actually not that hard,you can find some video on Youtube and then decide if it's too hard for you.
I am seriously thinking about submitting an order but have never built a keyboard before. This includes all you need except solder kit and switches right?
Mannn... so many glorious keyboards around here... I am really a sucker for that thin diffused LED line..
But once you start building keyboards,it may not be easy to stop.Haha :thumb: :thumb:
How many orders do we have now? :D
That's beautiful...If we can hit 100,all you need is a solder iron and switches. Maybe leds if you like it. It's actually not that hard,you can find some video on Youtube and then decide if it's too hard for you.
I am seriously thinking about submitting an order but have never built a keyboard before. This includes all you need except solder kit and switches right?
Mannn... so many glorious keyboards around here... I am really a sucker for that thin diffused LED line..
But once you start building keyboards,it may not be easy to stop.Haha :thumb: :thumb:
How many orders do we have now? :D
It's hard to say. Many people haven't pay their invoice. I don't know if they gonna pay it or not. :D :D :D
I'm about to pay but I don't know if silver is the way to go. D:PAID
submitted for gray!You are not gonna regret this!!
my first hhkb style board. can't wait!
Could you take a quick photo without the diffuser? I'd like to see what the top and bottom look like without the diffuser :)You can see it in the 1st page of this thread. I think it shows pretty clear.
submitted for gray!You are not gonna regret this!!
my first hhkb style board. can't wait!
I wish I don't screw up my first soldering job on a keyboard tho D:
I will definitely keep my eye out for more of your designs. As much as I love it, I think TKL is the life for me.Did you see Revo's Dr. D tkl?
I will definitely keep my eye out for more of your designs. As much as I love it, I think TKL is the life for me.Did you see Revo's Dr. D tkl?
Sent from my iPhone using Tapatalk
Last part arrived. Just take some quick pictures for you guys. No PSSo, will the diffuser make the board set up higher when installed or will it replace a part that is aluminum?
(Attachment Link)
(Attachment Link)
(Attachment Link)
Last part arrived. Just take some quick pictures for you guys. No PSSo, will the diffuser make the board set up higher when installed or will it replace a part that is aluminum?
(Attachment Link)
(Attachment Link)
(Attachment Link)
So, will the diffuser make the board set up higher when installed or will it replace a part that is aluminum?It will make it higher. No replacement. :p :p :p
Ohh man can't decide on colour. Grey or Silver?
Is the grey like the space grey on apple products?
Is it just me or does the front of the case look very tall? Seems like it would need a wrist rest to type comfortably.
How high is it compared to a HHKB pro2? 🤔Is it just me or does the front of the case look very tall? Seems like it would need a wrist rest to type comfortably.
I think that depends. I never use a wrist and i feel very comfortable. You may need a wrist. But hey i always use cherry profile keycaps. Must use a wrist if you are using SA. :D :D :D
Is it just me or does the front of the case look very tall? Seems like it would need a wrist rest to type comfortably.
I think that depends. I never use a wrist and i feel very comfortable. You may need a wrist. But hey i always use cherry profile keycaps. Must use a wrist if you are using SA. :D :D :D
How high is it compared to a HHKB pro2? 🤔
Thanks! :thumb:QuoteHow high is it compared to a HHKB pro2? 🤔
Just measure it. It's 21 mm thick in the front. 37 in the back make it 8 degree slope. Hope this can help you. :thumb: :thumb: :thumb:
Thanks! :thumb:QuoteHow high is it compared to a HHKB pro2? 🤔
Just measure it. It's 21 mm thick in the front. 37 in the back make it 8 degree slope. Hope this can help you. :thumb: :thumb: :thumb:
Google says the hhkb is about 40mm thick (probably at the thickest point), so I guess the revo is slightly thinner overall.Thanks! :thumb:QuoteHow high is it compared to a HHKB pro2? 🤔
Just measure it. It's 21 mm thick in the front. 37 in the back make it 8 degree slope. Hope this can help you. :thumb: :thumb: :thumb:
Anyone know how thick is a HHKB? I left mine at home, otherwise I'd measure it. :D
QuoteHow high is it compared to a HHKB pro2? 🤔
Just measure it. It's 21 mm thick in the front. 37 in the back make it 8 degree slope. Hope this can help you. :thumb: :thumb: :thumb:
Google says the hhkb is about 40mm thick (probably at the thickest point), so I guess the revo is slightly thinner overall.Thanks! :thumb:QuoteHow high is it compared to a HHKB pro2? 🤔
Just measure it. It's 21 mm thick in the front. 37 in the back make it 8 degree slope. Hope this can help you. :thumb: :thumb: :thumb:
Anyone know how thick is a HHKB? I left mine at home, otherwise I'd measure it. :D
thanks mate.looks like RJ will be a little bit thick.Google says the hhkb is about 40mm thick (probably at the thickest point), so I guess the revo is slightly thinner overall.Thanks! :thumb:QuoteHow high is it compared to a HHKB pro2?
Just measure it. It's 21 mm thick in the front. 37 in the back make it 8 degree slope. Hope this can help you. :thumb: :thumb: :thumb:
Anyone know how thick is a HHKB? I left mine at home, otherwise I'd measure it. :D
I just measured and it's 16/32mm front/back.
Google says the hhkb is about 40mm thick (probably at the thickest point), so I guess the revo is slightly thinner overall.Thanks! :thumb:QuoteHow high is it compared to a HHKB pro2? 🤔
Just measure it. It's 21 mm thick in the front. 37 in the back make it 8 degree slope. Hope this can help you. :thumb: :thumb: :thumb:
Anyone know how thick is a HHKB? I left mine at home, otherwise I'd measure it. :D
I just measured and it's 16/32mm front/back.
Google says the hhkb is about 40mm thick (probably at the thickest point), so I guess the revo is slightly thinner overall.Thanks! :thumb:QuoteHow high is it compared to a HHKB pro2? 🤔
Just measure it. It's 21 mm thick in the front. 37 in the back make it 8 degree slope. Hope this can help you. :thumb: :thumb: :thumb:
Anyone know how thick is a HHKB? I left mine at home, otherwise I'd measure it. :D
I just measured and it's 16/32mm front/back.
Google says the hhkb is about 40mm thick (probably at the thickest point), so I guess the revo is slightly thinner overall.Thanks! :thumb:QuoteHow high is it compared to a HHKB pro2? 🤔
Just measure it. It's 21 mm thick in the front. 37 in the back make it 8 degree slope. Hope this can help you. :thumb: :thumb: :thumb:
Anyone know how thick is a HHKB? I left mine at home, otherwise I'd measure it. :D
I just measured and it's 16/32mm front/back.
Welp, thanks for the heads up. Just confirmed with mine too, I guess google wasn't that accurate lol.
11 degreesGoogle says the hhkb is about 40mm thick (probably at the thickest point), so I guess the revo is slightly thinner overall.Thanks! :thumb:QuoteHow high is it compared to a HHKB pro2? 🤔
Just measure it. It's 21 mm thick in the front. 37 in the back make it 8 degree slope. Hope this can help you. :thumb: :thumb: :thumb:
Anyone know how thick is a HHKB? I left mine at home, otherwise I'd measure it. :D
I just measured and it's 16/32mm front/back.
Welp, thanks for the heads up. Just confirmed with mine too, I guess google wasn't that accurate lol.
Anyone know what the Duck Viper is?
Are there any pics of the PCB?He mentioned that it was black and gold but I do not think he has a pic yet. Not sure if he has the proto in hand yet.
Also, is it possible to get another PCB? :p
Are there any pics of the PCB?
Also, is it possible to get another PCB? :p
He mentioned that it was black and gold but I do not think he has a pic yet. Not sure if he has the proto in hand yet.
Are there any pics of the PCB?
Also, is it possible to get another PCB? :p
I post in IC thread before. It will be like this:
(Attachment Link)
(Attachment Link)
(Attachment Link)
You can also see it in Dr.D GB.
:p :p :p :p
omg that looks amazing, can i get another one? ;)
I'm waiting on the Lightsaver GB to go live but really want one of these as well. And there's no guarantee of even getting a lightsaver... It's fine to just buy one with the excuse that it'll be worth more aftermarket (even though I'd have no intention of selling it) right? And it's fine to buy one having never tried HHKB layout right? I've been considering getting an HHKB but I guess this is just gonna be way nicer anyway.Hi,
I mean, my hands would look so good on that pink...
Quote
omg that looks amazing, can i get another one? ;)
Sorry, Don't want to give that option cause it bring me too much workload. Didn't work well last time. Anyway,there are some that don't want a PCB or plate i think you can get another one easily. :thumb: :thumb: :thumb:
Quote
omg that looks amazing, can i get another one? ;)
Sorry, Don't want to give that option cause it bring me too much workload. Didn't work well last time. Anyway,there are some that don't want a PCB or plate i think you can get another one easily. :thumb: :thumb: :thumb:
No probs, if anyone wanna let go of their PCB please PM me.
@Revo, if someone wanna give me their PCB is it possible to arrange it at your side, so there's no need for further shipping :p
Quote
omg that looks amazing, can i get another one? ;)
Sorry, Don't want to give that option cause it bring me too much workload. Didn't work well last time. Anyway,there are some that don't want a PCB or plate i think you can get another one easily. :thumb: :thumb: :thumb:
No probs, if anyone wanna let go of their PCB please PM me.
@Revo, if someone wanna give me their PCB is it possible to arrange it at your side, so there's no need for further shipping :p
I'll get in touch.
I plan on using a zeal60 pcb with the case so someone is more than welcome to buy my pcb and potentially plate off of me.
Revo, this may have been answered already, but I didn't see it anywhere: does the PCB support PCB mount switches, or will we need plate mount switches?It support PCB mount switches. Btw, you are the first one asked about this.LOL :p :p :p
No, it won't be any different. I mean you could buy it from him. I will pack each kit the same way,this can make thing much easier for me.Cause you know, i don't want to put 2 pcbs in one box. I always missing something for someone. Anyhow,i think one pcb is enough for you. If you want more later on you can always pm me. And i think lots of people are trying to sell their PCB. :thumb: :thumb: :thumb:
Would getting it from oco be different in this case? I'm getting it directly from Revo so I'm not sure how the inner procedures work.
How's the MOQ for this? Might have to get stabs myself if it's not reached :(We are no there yet. But good news is i may bring the free stabs anyway. Still working on it but ill try my best. :thumb: :thumb: :thumb:
So should I use my Zeal stabs or the Revo stabs?How's the MOQ for this? Might have to get stabs myself if it's not reached :(We are no there yet. But good news is i may bring the free stabs anyway. Still working on it but ill try my best. :thumb: :thumb: :thumb:
So should I use my Zeal stabs or the Revo stabs?How's the MOQ for this? Might have to get stabs myself if it's not reached :(We are no there yet. But good news is i may bring the free stabs anyway. Still working on it but ill try my best. :thumb: :thumb: :thumb:
Sent from my iPhone using Tapatalk
Zeal ones being the clear gold ones that are designed pre clipped. Both are pcb mount though.So should I use my Zeal stabs or the Revo stabs?How's the MOQ for this? Might have to get stabs myself if it's not reached :(We are no there yet. But good news is i may bring the free stabs anyway. Still working on it but ill try my best. :thumb: :thumb: :thumb:
Sent from my iPhone using Tapatalk
Are the Revo stabs different from Zeal stabs? Both are PCB mounted right?
Zeal ones being the clear gold ones that are designed pre clipped. Both are pcb mount though.So should I use my Zeal stabs or the Revo stabs?How's the MOQ for this? Might have to get stabs myself if it's not reached :(We are no there yet. But good news is i may bring the free stabs anyway. Still working on it but ill try my best. :thumb: :thumb: :thumb:
Sent from my iPhone using Tapatalk
Are the Revo stabs different from Zeal stabs? Both are PCB mounted right?
Sent from my iPhone using Tapatalk
I don't think we have seen the revo stabs before?
Also since this is a BFace-like PCB, are the LEDs for the diffuser pre-soldered?
Quote
I don't think we have seen the revo stabs before?
Also since this is a BFace-like PCB, are the LEDs for the diffuser pre-soldered?
You just need to solder the switches and LEDs . Underglow leds is pre-soldered.
Our stabs is black. Just looks normal. ;D ;D ;D
Quote
I don't think we have seen the revo stabs before?
Also since this is a BFace-like PCB, are the LEDs for the diffuser pre-soldered?
You just need to solder the switches and LEDs . Underglow leds is pre-soldered.
Our stabs is black. Just looks normal. ;D ;D ;D
Thanks, BTW i sent you a PM about color change (again). Sorry about that :-[
Hi,guys form will closed on Friday. Invoice payment deadline Saturday. There will be no leftovers for sale this time. Free stabs for every kit now. We have a really nice run right now,thank you guy for all your support!
Hi,guys form will closed on Friday. Invoice payment deadline Saturday. There will be no leftovers for sale this time. Free stabs for every kit now. We have a really nice run right now,thank you guy for all your support!
Hi,guys form will closed on Friday. Invoice payment deadline Saturday. There will be no leftovers for sale this time. Free stabs for every kit now. We have a really nice run right now,thank you guy for all your support!
Not there yet,but still i am giving free stabs anyway. hahaHi,guys form will closed on Friday. Invoice payment deadline Saturday. There will be no leftovers for sale this time. Free stabs for every kit now. We have a really nice run right now,thank you guy for all your support!
Awesome, did we reach 100 units? ;D
I am in. Already filled the form. I suppose I will receive a Paypal Invoice.
Just a question about the layout. It is pure HHKB-Style but the spacebar that MUST be 7u, isn't it? (I have some keycap sets with no 7u key... I need those now!) :eek:
Please let me know. THX
I am in. Already filled the form. I suppose I will receive a Paypal Invoice.
Just a question about the layout. It is pure HHKB-Style but the spacebar that MUST be 7u, isn't it? (I have some keycap sets with no 7u key... I need those now!) :eek:
Please let me know. THX
The plate supports regular non split backspace and a regular non split right shift.
The spacebar must be 7u
I am in. Already filled the form. I suppose I will receive a Paypal Invoice.
Just a question about the layout. It is pure HHKB-Style but the spacebar that MUST be 7u, isn't it? (I have some keycap sets with no 7u key... I need those now!) :eek:
Please let me know. THX
The plate supports regular non split backspace and a regular non split right shift.
The spacebar must be 7u
but it can be HHKB split backspace and split right shift, isn't it? (love HHKB style...)
I am in. Already filled the form. I suppose I will receive a Paypal Invoice.
Just a question about the layout. It is pure HHKB-Style but the spacebar that MUST be 7u, isn't it? (I have some keycap sets with no 7u key... I need those now!) :eek:
Please let me know. THX
The plate supports regular non split backspace and a regular non split right shift.
The spacebar must be 7u
but it can be HHKB split backspace and split right shift, isn't it? (love HHKB style...)
Hey Revo, is MOQ combined for both you and Originative? I ordered through Ori, and just want to make sure I'll get it :)Yep,it's combined. You'll get free stabs no problem my friend.
We are closing soon. So if you want this,please pay your invoice. I will cut all the unpaid orders on Saturday. If you order from Sherry,then you don't need to worry about it.
Thanks everyone,this has been a nice GB so far.I really appericate it.:D:D:D
Paid. Europe guy here. August... color not yet clear... I chose Grey... may we have some color photos of the KBs before final decision is done?
Thx
Happy birthday mate 😀Thank you,sir. Wish you have a great day! :thumb: :thumb: :thumb:
Planning on putting MX Silents in mine (pink switch for a pink keyb), but not sure if I want to use the PC or the alu plate yet. Any reccs/suggestions? ;D
Planning on putting MX Silents in mine (pink switch for a pink keyb), but not sure if I want to use the PC or the alu plate yet. Any reccs/suggestions? ;D
Planning on putting MX Silents in mine (pink switch for a pink keyb), but not sure if I want to use the PC or the alu plate yet. Any reccs/suggestions? ;D
PC seems like a good choice for those. Softer plate for more noise reduction, and I hear linears feel najs on poly.
Planning on putting MX Silents in mine (pink switch for a pink keyb), but not sure if I want to use the PC or the alu plate yet. Any reccs/suggestions? ;D
Maybe Use PC plate. I never try those Silents. Anyway the color will be amzaing.For me, i think MX black is the best switch. :thumb: :thumb: :thumb:
GB closed. My birthday on 22nd,so i wasn't here yesterday. I will sort out everything tomorrow and give the order to factory and i will update everything in this thread.
Thank you guys for all your support. This has been a great journey for me!
;D And let the waiting start. I'm wondering how much orders in total were submitted?Will have the numbers later on,i have talk with sherry and he had 50 boards. So we have like 90 boards all over the world. :thumb: :thumb: :thumb:
Hope you had a great birthday, bud. :thumb: Excited to see the buy closed and moving forward.
How does that compare with Dr. D quantity?;D And let the waiting start. I'm wondering how much orders in total were submitted?Will have the numbers later on,i have talk with sherry and he had 50 boards. So we have like 90 boards all over the world. :thumb: :thumb: :thumb:
How does that compare with Dr. D quantity?;D And let the waiting start. I'm wondering how much orders in total were submitted?Will have the numbers later on,i have talk with sherry and he had 50 boards. So we have like 90 boards all over the world. :thumb: :thumb: :thumb:
Sent from my iPhone using Tapatalk
How does that compare with Dr. D quantity?;D And let the waiting start. I'm wondering how much orders in total were submitted?Will have the numbers later on,i have talk with sherry and he had 50 boards. So we have like 90 boards all over the world. :thumb: :thumb: :thumb:
Sent from my iPhone using Tapatalk
I think the RJ is supposed to have superior quality as mentioned in the IC thread. ;D
How does that compare with Dr. D quantity?;D And let the waiting start. I'm wondering how much orders in total were submitted?Will have the numbers later on,i have talk with sherry and he had 50 boards. So we have like 90 boards all over the world. :thumb: :thumb: :thumb:
Sent from my iPhone using Tapatalk
I think the RJ is supposed to have superior quality as mentioned in the IC thread. ;D
I think he said quantity....
Not that many chiming in here seem too on the fence... but for what it's worth, the Revo/ Dr. D GB has been really well executed so far by the good folks at Revo Team. Great communication, easy to work with and solid attention to detail on the product. Final judgement reserved of course for when it's in hand, but I'm extremely eager to see the Dr. D board based on progress so far.Thanks,Dr.D is in progress. I hope i can ship them before this GB start. I am really looking forward to it as well.
I have zero reservations about chucking a bit more coin Revo's way when this opens up... looks sick!
Anyway, This is a huge upgrade compare with Dr.D. It really worth it. :)
It is anodized in the same factory as Macbooks, but is the process and quality control the same as well? I'm assuming Apple uses a custom process. Knowing it was made in the same factory as Apple doesn't justify the price to me unless it is guaranteed to use the same process and quality. Any info there would be helpful.When i talked to them, i actually ask for better quality for this. Keyboard should be treat like an art piece instead of mechanical part. Even i said this,something wrong could happen when it goes to anode. Hang point,color difference,anode evenness,etc. What i can promise is i'll do my best and i will personally supervise the whole process of the anode. This means this HHKB kit will be the best kit we ever produce.I won't send out anything that has a ding or scratch on the surface or heavy color defference or uneven anode. If you buy this and receive it have this kind of problem.i'll change it for you free of charge.
I mean quantity as in how many hhkb's sold vs tkl's.How does that compare with Dr. D quantity?;D And let the waiting start. I'm wondering how much orders in total were submitted?Will have the numbers later on,i have talk with sherry and he had 50 boards. So we have like 90 boards all over the world. :thumb: :thumb: :thumb:
Sent from my iPhone using Tapatalk
I think the RJ is supposed to have superior quality as mentioned in the IC thread. ;D
I think he said quantity....
Nah, did a quick grep over the IC thread and found stuff like this:Not that many chiming in here seem too on the fence... but for what it's worth, the Revo/ Dr. D GB has been really well executed so far by the good folks at Revo Team. Great communication, easy to work with and solid attention to detail on the product. Final judgement reserved of course for when it's in hand, but I'm extremely eager to see the Dr. D board based on progress so far.Thanks,Dr.D is in progress. I hope i can ship them before this GB start. I am really looking forward to it as well.
I have zero reservations about chucking a bit more coin Revo's way when this opens up... looks sick!
Anyway, This is a huge upgrade compare with Dr.D. It really worth it. :)It is anodized in the same factory as Macbooks, but is the process and quality control the same as well? I'm assuming Apple uses a custom process. Knowing it was made in the same factory as Apple doesn't justify the price to me unless it is guaranteed to use the same process and quality. Any info there would be helpful.When i talked to them, i actually ask for better quality for this. Keyboard should be treat like an art piece instead of mechanical part. Even i said this,something wrong could happen when it goes to anode. Hang point,color difference,anode evenness,etc. What i can promise is i'll do my best and i will personally supervise the whole process of the anode. This means this HHKB kit will be the best kit we ever produce.I won't send out anything that has a ding or scratch on the surface or heavy color defference or uneven anode. If you buy this and receive it have this kind of problem.i'll change it for you free of charge.
Welp, my bad lol. #failatreadingI mean quantity as in how many hhkb's sold vs tkl's.How does that compare with Dr. D quantity?;D And let the waiting start. I'm wondering how much orders in total were submitted?Will have the numbers later on,i have talk with sherry and he had 50 boards. So we have like 90 boards all over the world. :thumb: :thumb: :thumb:
Sent from my iPhone using Tapatalk
I think the RJ is supposed to have superior quality as mentioned in the IC thread. ;D
I think he said quantity....
Nah, did a quick grep over the IC thread and found stuff like this:Not that many chiming in here seem too on the fence... but for what it's worth, the Revo/ Dr. D GB has been really well executed so far by the good folks at Revo Team. Great communication, easy to work with and solid attention to detail on the product. Final judgement reserved of course for when it's in hand, but I'm extremely eager to see the Dr. D board based on progress so far.Thanks,Dr.D is in progress. I hope i can ship them before this GB start. I am really looking forward to it as well.
I have zero reservations about chucking a bit more coin Revo's way when this opens up... looks sick!
Anyway, This is a huge upgrade compare with Dr.D. It really worth it. :)It is anodized in the same factory as Macbooks, but is the process and quality control the same as well? I'm assuming Apple uses a custom process. Knowing it was made in the same factory as Apple doesn't justify the price to me unless it is guaranteed to use the same process and quality. Any info there would be helpful.When i talked to them, i actually ask for better quality for this. Keyboard should be treat like an art piece instead of mechanical part. Even i said this,something wrong could happen when it goes to anode. Hang point,color difference,anode evenness,etc. What i can promise is i'll do my best and i will personally supervise the whole process of the anode. This means this HHKB kit will be the best kit we ever produce.I won't send out anything that has a ding or scratch on the surface or heavy color defference or uneven anode. If you buy this and receive it have this kind of problem.i'll change it for you free of charge.
Sent from my iPhone using Tapatalk
How does that compare with Dr. D quantity?
Sent from my iPhone using Tapatalk
Welp, my bad lol. #failatreading
91 means no Revo stabs, right? Do we still get some in the kit, or do we need to source them ourselves?I will put stabs in this time to thank everyone. :thumb: :thumb: :thumb:
Thanks for all the work, can't wait!
91 means no Revo stabs, right? Do we still get some in the kit, or do we need to source them ourselves?I will put stabs in this time to thank everyone. :thumb: :thumb: :thumb:
Thanks for all the work, can't wait!
91 means no Revo stabs, right? Do we still get some in the kit, or do we need to source them ourselves?I will put stabs in this time to thank everyone. :thumb: :thumb: :thumb:
Thanks for all the work, can't wait!
What a legend :thumb: ;D
91 means no Revo stabs, right? Do we still get some in the kit, or do we need to source them ourselves?I will put stabs in this time to thank everyone. :thumb: :thumb: :thumb:
Thanks for all the work, can't wait!
What a legend :thumb: ;D
Agreed. I am so happy I was able to join this buy, I simply cannot wait. It's going to be epic :p
Now, what PCB should I use...🤔
Now, what PCB should I use...🤔
Now, what PCB should I use...🤔
Im gonna be using a zeal 60
I have a Zeal60, and I like it a lot. The major reason is that it has LEDs on the board, instead of in-switch LEDs. Plus, it's purple. I won't be using it in my Revo case, however. Also worth noting that if you live in the US, after shipping a B.face will cost close to the same. Honestly though, they both are made well, and are very comparable.
I'm kind of surprised that only 91 units sold. I guess the price probably alienated more people, but what can ya do.
I have a Zeal60, and I like it a lot. The major reason is that it has LEDs on the board, instead of in-switch LEDs. Plus, it's purple. I won't be using it in my Revo case, however. Also worth noting that if you live in the US, after shipping a B.face will cost close to the same. Honestly though, they both are made well, and are very comparable.
I'm kind of surprised that only 91 units sold. I guess the price probably alienated more people, but what can ya do.
A b.face will, a b.fake will be much cheaper.
I'm interested in knowing this as well :]
Im also surprised by only 91, but that makes me feel special because so few people will own these, and even less a pink one :D
Is there any chance we could get info on the number of each colour chosen, Raymond?
I might be open to transferring my order at cost through originative as I think I've had enough boards lately. Asking a friend who've expressed interest first though, ping me if you're interested.
I have a Zeal60, and I like it a lot. The major reason is that it has LEDs on the board, instead of in-switch LEDs. Plus, it's purple. I won't be using it in my Revo case, however. Also worth noting that if you live in the US, after shipping a B.face will cost close to the same. Honestly though, they both are made well, and are very comparable.
I'm kind of surprised that only 91 units sold. I guess the price probably alienated more people, but what can ya do.
A b.face will, a b.fake will be much cheaper.
Im also surprised by only 91, but that makes me feel special because so few people will own these, and even less a pink one :D
Is there any chance we could get info on the number of each colour chosen, Raymond?
I might be open to transferring my order at cost through originative as I think I've had enough boards lately. Asking a friend who've expressed interest first though, ping me if you're interested.
Have you emailed them to see if you can cancel?
I might be open to transferring my order at cost through originative as I think I've had enough boards lately. Asking a friend who've expressed interest first though, ping me if you're interested.
Have you emailed them to see if you can cancel?
That might be a choice too though, but I don't really want to waste my spot seeing that the GB has closed. I'd rather it go to someone who would really like it.
(and I'm still fighting with my inner demons on whether I should keep it personally lol)
I might be open to transferring my order at cost through originative as I think I've had enough boards lately. Asking a friend who've expressed interest first though, ping me if you're interested.
Have you emailed them to see if you can cancel?
That might be a choice too though, but I don't really want to waste my spot seeing that the GB has closed. I'd rather it go to someone who would really like it.
(and I'm still fighting with my inner demons on whether I should keep it personally lol)
Understandable. I almost did not join but I knew I would regret it so I made it work.
What color(s) did you get for the board?
What color(s) did you get for the board?
A black one, but I understand that the color can be changed until the anodizing process is underway.
What color(s) did you get for the board?
I have a Zeal60, and I like it a lot. The major reason is that it has LEDs on the board, instead of in-switch LEDs. Plus, it's purple. I won't be using it in my Revo case, however. Also worth noting that if you live in the US, after shipping a B.face will cost close to the same. Honestly though, they both are made well, and are very comparable.
I'm kind of surprised that only 91 units sold. I guess the price probably alienated more people, but what can ya do.
A b.face will, a b.fake will be much cheaper.
Im also surprised by only 91, but that makes me feel special because so few people will own these, and even less a pink one :D
Is there any chance we could get info on the number of each colour chosen, Raymond?
I might be open to transferring my order at cost through originative as I think I've had enough boards lately. Asking a friend who've expressed interest first though, ping me if you're interested.Sorry i can't give you a refund cause i have paid factory,but you can sell your spot. Anyhow i recommond you keep it for yourself. :eek:
I might be open to transferring my order at cost through originative as I think I've had enough boards lately. Asking a friend who've expressed interest first though, ping me if you're interested.Sorry i can't give you a refund cause i have paid factory,but you can sell your spot. Anyhow i recommond you keep it for yourself. :eek:
I have a Zeal60, and I like it a lot. The major reason is that it has LEDs on the board, instead of in-switch LEDs. Plus, it's purple. I won't be using it in my Revo case, however. Also worth noting that if you live in the US, after shipping a B.face will cost close to the same. Honestly though, they both are made well, and are very comparable.
I'm kind of surprised that only 91 units sold. I guess the price probably alienated more people, but what can ya do.
A b.face will, a b.fake will be much cheaper.
Im also surprised by only 91, but that makes me feel special because so few people will own these, and even less a pink one :D
Is there any chance we could get info on the number of each colour chosen, Raymond?
I am been away for a holiday and some people are changing their color choice,but the most wanted color for case is grey. :D
(Attachment Link)
(Attachment Link)
Is the underglow showed on this picture present on all the case? (not quite sure with the first pictures).
So sad I missed it ... although it's quite out of my wallet's reach haha
Will you, by any chance, be offering a matching numpad to the case in the future?
Doesn't have pink /:Will you, by any chance, be offering a matching numpad to the case in the future?
The revo numpad looks pretty matching.
If anyone wants to sell theirs let me know I am looking to get one as my main board.
What PCB does it come with cause I am thinking about getting the zeal60.
Thanks.
If anyone wants to sell theirs let me know I am looking to get one as my main board.
What PCB does it come with cause I am thinking about getting the zeal60.
Thanks.
It comes with a b.fake. it's in the very first post.
If anyone wants to sell theirs let me know I am looking to get one as my main board.
What PCB does it come with cause I am thinking about getting the zeal60.
Thanks.
It comes with a b.fake. it's in the very first post.
Thanks, I read that first post like 4 times and didn't see it, I even went back and looked again and still didn't see it...
If anyone wants to sell theirs let me know I am looking to get one as my main board.
What PCB does it come with cause I am thinking about getting the zeal60.
Thanks.
It comes with a b.fake. it's in the very first post.
Thanks, I read that first post like 4 times and didn't see it, I even went back and looked again and still didn't see it...
I couldn't join the GB. If someone want to sell a pink one, please PM me.
Hot damn the pink is in hot demandBecause it's the best colour! Pretty rare to find a pink keeb, even less so one this lovely colour and in HHKB style.
Actually, i think pink is easy to pair. You can always use beige sets if you don't have any Valentine set. :D
Show Image(http://i.imgur.com/ut2jRqa.jpg)Show Image(http://i.imgur.com/tpi0utb.jpg)Show Image(http://i.imgur.com/ZBEbvK9.jpg)Show Image(http://i.imgur.com/CoZJ1J9.jpg)Show Image(http://i.imgur.com/9yvJj7D.jpg)
Take some pictures of RJ since i got a free weekend. ;D ;D ;D
Show Image(http://i.imgur.com/ut2jRqa.jpg)Show Image(http://i.imgur.com/tpi0utb.jpg)Show Image(http://i.imgur.com/ZBEbvK9.jpg)Show Image(http://i.imgur.com/CoZJ1J9.jpg)Show Image(http://i.imgur.com/9yvJj7D.jpg)
Take some pictures of RJ since i got a free weekend. ;D ;D ;D
Show Image(http://i.imgur.com/ut2jRqa.jpg)Show Image(http://i.imgur.com/tpi0utb.jpg)Show Image(http://i.imgur.com/ZBEbvK9.jpg)Show Image(http://i.imgur.com/CoZJ1J9.jpg)Show Image(http://i.imgur.com/9yvJj7D.jpg)
Take some pictures of RJ since i got a free weekend. ;D ;D ;D
Wow, is the left one the black rj? :D
Show Image(http://i.imgur.com/ut2jRqa.jpg)Show Image(http://i.imgur.com/tpi0utb.jpg)Show Image(http://i.imgur.com/ZBEbvK9.jpg)Show Image(http://i.imgur.com/CoZJ1J9.jpg)Show Image(http://i.imgur.com/9yvJj7D.jpg)
Take some pictures of RJ since i got a free weekend. ;D ;D ;D
Where is grey? :p
Wow, is the left one the black rj? :D
Can't be, look at the bottom row. I'd imagine it's the same colour though, makes me question my choice even more :(
I had a dream about RJ last night <3
I had a dream about RJ last night <3
I had a dream about RJ last night <3Haha,You just make my day,my friend
Anyone wanting the plates/pcb/stabs, pm me. I'm not gunna use any of em. Would prefer to sell all 4 items together.
Edited to add stabs.
Zeal60Anyone wanting the plates/pcb/stabs, pm me. I'm not gunna use any of em. Would prefer to sell all 4 items together.
Edited to add stabs.
What pcb are you planning to use? Just curious.
really hoping someone hates theirs so I can buy it on MM :-X :rolleyes:
Just to clarify, the b.fake is the b.face made by winkeyless right?
Just to clarify, the b.fake is the b.face made by winkeyless right?Dunno, but if winkeyless.kr makes them why would it be called b.fake? ;D
Just to clarify, the b.fake is the b.face made by winkeyless right?Dunno, but if winkeyless.kr makes them why would it be called b.fake? ;D
lol does the b.fake imply its a copy of the b.face but has all of the same functions?
Bought some Vintage Blacks last night. Now I just need a switch modding station... And possibly Zealio housings...I can vouch for Vint black stems on Zealios housings! Add some lube and it's ultra smooth.
Now for the real question... Which plate should I use?
Bought some Vintage Blacks last night. Now I just need a switch modding station... And possibly Zealio housings...
Now for the real question... Which plate should I use?
He did an HHKB brass?!Bought some Vintage Blacks last night. Now I just need a switch modding station... And possibly Zealio housings...
Now for the real question... Which plate should I use?
Personally, I would use the Mekanisk 60% Brass HHKB plate...
He did an HHKB brass?!Bought some Vintage Blacks last night. Now I just need a switch modding station... And possibly Zealio housings...
Now for the real question... Which plate should I use?
Personally, I would use the Mekanisk 60% Brass HHKB plate...
Sent from my SM-G955U using Tapatalk
Bought some Vintage Blacks last night. Now I just need a switch modding station... And possibly Zealio housings...I'm using vint blacks in Zeal housings on a brass plate, gon be good.
Now for the real question... Which plate should I use?
Bought some Vintage Blacks last night. Now I just need a switch modding station... And possibly Zealio housings...I'm using vint blacks in Zeal housings on a brass plate, gon be good.
Now for the real question... Which plate should I use?
Sent from my iPhone using Tapatalk
He did an HHKB brass?!Bought some Vintage Blacks last night. Now I just need a switch modding station... And possibly Zealio housings...
Now for the real question... Which plate should I use?
Personally, I would use the Mekanisk 60% Brass HHKB plate...
Sent from my SM-G955U using Tapatalk
Yeah! It is one of the options:
https://mekanisk.co/collections/keyboard-parts/products/60-plate-brass (https://mekanisk.co/collections/keyboard-parts/products/60-plate-brass)
I'm keeping my PC plate for some ergo clears I have. We have similar builds haha.Bought some Vintage Blacks last night. Now I just need a switch modding station... And possibly Zealio housings...I'm using vint blacks in Zeal housings on a brass plate, gon be good.
Now for the real question... Which plate should I use?
Sent from my iPhone using TapatalkHe did an HHKB brass?!Bought some Vintage Blacks last night. Now I just need a switch modding station... And possibly Zealio housings...
Now for the real question... Which plate should I use?
Personally, I would use the Mekanisk 60% Brass HHKB plate...
Sent from my SM-G955U using Tapatalk
Yeah! It is one of the options:
https://mekanisk.co/collections/keyboard-parts/products/60-plate-brass (https://mekanisk.co/collections/keyboard-parts/products/60-plate-brass)
Ok, Just ordered one! Super stoked for this. I am also going to do Vin Blacks in Zealio Housings on this brass plate. Will probably keep the PC plate for a tactile build down the road and sell the other plate.
Thanks for the heads-up on that plate! Now I just need to find a PCB.
ONLY 1 HHKB BRASS PLATE LEFT!
I REALLY hope these fit RJ... haha
https://mekanisk.co/collections/keyboard-parts/products/60-plate-brass
will you open source the case?
will you open source the case?Sorry, cant do that.
Sorry i havent been here all the time. It's still in the CNC factory. Will be ready for anode next month. RJ need a very long CNC time.:D Everything is going well at this moment.
Sorry i havent been here all the time. It's still in the CNC factory. Will be ready for anode next month. RJ need a very long CNC time.:D Everything is going well at this moment.
Just a heads up, I am trying to refund my Leandren HHKB Brass plate. Still waiting to hear back but be on the look out if you want it.
https://mekanisk.co/collections/keyboard-parts/products/60-plate-brass?variant=42351501767
Yeah.. I bought something today and needed the money there. I'm sure I will regret this down the road but I use my HHKB more anyway haha
Just a heads up, I am trying to refund my Leandren HHKB Brass plate. Still waiting to hear back but be on the look out if you want it.
https://mekanisk.co/collections/keyboard-parts/products/60-plate-brass?variant=42351501767
Oh, change of plans with the HHKB brass plate?
Sorry i havent been here all the time. It's still in the CNC factory. Will be ready for anode next month. RJ need a very long CNC time.:D Everything is going well at this moment.
Will the schedule be delayed a bit or can we still expect August?
Let me know if anyone is looking to sell their spot. Been away for a bit but would love to get one of these.Good Luck,mate
Sent from my Nexus 6P using Tapatalk
Any new pics?I have got anything new at the moment so no new pics. I will update some pics when i go to the factory for the anode.
Any new pics?I have got anything new at the moment so no new pics. I will update some pics when i go to the factory for the anode.
Let me know if anyone is looking to sell their spot. Been away for a bit but would love to get one of these.Good Luck,mate
Sent from my Nexus 6P using Tapatalk
Getting excited to meet RJ, Raymond!
The Revo numpad went up on Massdrop today. Can you please tell us how close of a match that will be (size and colors) to the RJ?
Getting excited to meet RJ, Raymond!
The Revo numpad went up on Massdrop today. Can you please tell us how close of a match that will be (size and colors) to the RJ?
Well, that keypad is not designed to pair with RJ. And the color is different. Size is also very different,the keypad is better pair with a TKL. Also it used another CNC and anode factory,so it's quite different. But i think black silver are very close.
I know i am not suppose to say dont buy it. But if you want to pair with RJ it's not a perfect choice. However your questions makes me thinking about doing one keypad to pair with RJ. We can have a small buy if there's demand.
Have a good one,steve
+1 for keypad
Getting excited to meet RJ, Raymond!
The Revo numpad went up on Massdrop today. Can you please tell us how close of a match that will be (size and colors) to the RJ?
Well, that keypad is not designed to pair with RJ. And the color is different. Size is also very different,the keypad is better pair with a TKL. Also it used another CNC and anode factory,so it's quite different. But i think black silver are very close.
I know i am not suppose to say dont buy it. But if you want to pair with RJ it's not a perfect choice. However your questions makes me thinking about doing one keypad to pair with RJ. We can have a small buy if there's demand.
Have a good one,steve
+1 for keypad
Sent from my iPhone using Tapatalk
Thanks Raymond! Should have noticed that, of course the dimensions are closer to Dr. D than RJ.
I'd definitely be down for a matching RJ keypad. That combination would be pretty tough to get off my desk... RJ for daily love and some numbers to bust out for the delightfulness that is quarter end.
Transfer is open and all transfer should go through me. Btw,You guys have to make up your mind of the colors now. No color change after 1st July.Oh man... I THINK I may happy with my color haha
Thanks guys ;D
I think a smaller numpad/macropad would be very cool! (only 5 rows tall instead of six)I have got your PM. will you please send it again,sir?
Also, PM'D about a color change.
I think a smaller numpad/macropad would be very cool! (only 5 rows tall instead of six)I have got your PM. will you please send it again,sir?
Also, PM'D about a color change.
If i am doing a pad to pair RJ,it will be small. 5 rows like you said.
Super!! Can't wait for the pad! I just sent the PM now; it took me a little bit to write since I got side tracked.
So excited now! BTW I pm'd you about a color change haha XDGot it ;D ;D ;D
:thumb:So excited now! BTW I pm'd you about a color change haha XDGot it ;D ;D ;D
Hi Everyone
A little update here. We have finished the CNC for RJ. But there will be a delay because we have made a decision to use a improved polish shop.
This is something new we just tried and this polish is really good. Although this will cost more money than excepted but we just want to use the best we could.Anyway i won't charge you guys anything but unfortunately this is done by hands so there will be a delay. I am not sure how long at this moment,i assume it will be a month at top.
Here are some pictures of a sample we tried. All RJ kits will be polished like this:
(Attachment Link)
(Attachment Link)
If you have any question about this you can always send me a pm. I may not post in this thread that often but i am always on GH.
Dang, Raymond- you never cease to amaze!! That polished finish looks amazing. Thanks for the update and for always thinking of quality first. No doubts about this being phenomenal when all is said and done.
My only question is what the colors will look like with the polish finish...? Of course, looks sick on silver, but can't quite picture a mirror finish on black or pink. Any samples of that?
Quote
Dang, Raymond- you never cease to amaze!! That polished finish looks amazing. Thanks for the update and for always thinking of quality first. No doubts about this being phenomenal when all is said and done.
My only question is what the colors will look like with the polish finish...? Of course, looks sick on silver, but can't quite picture a mirror finish on black or pink. Any samples of that?
I am not quite understand your question. As for the colors, this wont change the colors. This just give us the ability to use smaller sand and make the anode layer even more smoother and better looking. So it's like a better surface for the board. And this doesnt influence the coloring procedure so the color will be the same.
Hope this is can help you my friend. And have a good one. Haha :p
I still need to improve my English is all. But if you are thinking a new red Ferrari,this is not that case. I think cars have a paint layer on top of the anode layer but keyboards dont have it(i am not sure about it,i dont know how cars are made). We still need to sandblast it so you will still see the sand,just smaller than usual.This will definitely lose all the machine marks so this can have a perfect surface. Normally we just roughly polish it and sandblast can cover most of the machine marks but sometimes you can see some of those. This mirror like polish will get rid of all the machine marks.
Sorry- didn't ask that very well.
Just wondering if it will be a shiny mirror finish and smooth feeling over the colors (think new red Ferrari) instead of the more matte feel and slightly rough finish we are all used to with standard ano processing.
Thank you too, my friend! Have a great weekend.
Wow! I'm impressed!
Looking forward to get my hands on this board :eek:
Apple anode quality AND a polished finish 😍
Hi Everyone
A little update here. We have finished the CNC for RJ. But there will be a delay because we have made a decision to use a improved polish shop.
This is something new we just tried and this polish is really good. Although this will cost more money than excepted but we just want to use the best we could.Anyway i won't charge you guys anything but unfortunately this is done by hands so there will be a delay. I am not sure how long at this moment,i assume it will be a month at top.
Here are some pictures of a sample we tried. All RJ kits will be polished like this:
(Attachment Link)
(Attachment Link)
If you have any question about this you can always send me a pm. I may not post in this thread that often but i am always on GH.
Quote
Thanks Raymond! Should have noticed that, of course the dimensions are closer to Dr. D than RJ.
I'd definitely be down for a matching RJ keypad. That combination would be pretty tough to get off my desk... RJ for daily love and some numbers to bust out for the delightfulness that is quarter end.
Well anyway it have to wait till RJ is finished and all. I am thinking something really small right now. Maybe just for RJ's buyer as well. One small run within RJ's GB.
But right now, i am hoping my keypad doing good on Massdrop. Haha
Going to bed, talk later my friend. :D
QuoteI still need to improve my English is all. But if you are thinking a new red Ferrari,this is not that case. I think cars have a paint layer on top of the anode layer but keyboards dont have it(i am not sure about it,i dont know how cars are made). We still need to sandblast it so you will still see the sand,just smaller than usual.This will definitely lose all the machine marks so this can have a perfect surface. Normally we just roughly polish it and sandblast can cover most of the machine marks but sometimes you can see some of those. This mirror like polish will get rid of all the machine marks.
Sorry- didn't ask that very well.
Just wondering if it will be a shiny mirror finish and smooth feeling over the colors (think new red Ferrari) instead of the more matte feel and slightly rough finish we are all used to with standard ano processing.
Thank you too, my friend! Have a great weekend.
I am not sure if i explain this clearly,but ask me anything you dont understand
Btw, we are trying something new about the Alu coating,maybe you'll like it. Stay tuned.
Have a nice weekend!
Hi Everyone
A little update here. We have finished the CNC for RJ. But there will be a delay because we have made a decision to use a improved polish shop.
This is something new we just tried and this polish is really good. Although this will cost more money than excepted but we just want to use the best we could.Anyway i won't charge you guys anything but unfortunately this is done by hands so there will be a delay. I am not sure how long at this moment,i assume it will be a month at top.
Here are some pictures of a sample we tried. All RJ kits will be polished like this:
(Attachment Link)
(Attachment Link)
If you have any question about this you can always send me a pm. I may not post in this thread that often but i am always on GH.
Is that a brass weight on the bottom?
My only question is what the colors will look like with the polish finish...? Of course, looks sick on silver, but can't quite picture a mirror finish on black or pink. Any samples of that?
Ahh you are right. Looks like a 65% case. Must be a proto. Damn.. I got excitedHi Everyone
A little update here. We have finished the CNC for RJ. But there will be a delay because we have made a decision to use a improved polish shop.
This is something new we just tried and this polish is really good. Although this will cost more money than excepted but we just want to use the best we could.Anyway i won't charge you guys anything but unfortunately this is done by hands so there will be a delay. I am not sure how long at this moment,i assume it will be a month at top.
Here are some pictures of a sample we tried. All RJ kits will be polished like this:
(Attachment Link)
(Attachment Link)
If you have any question about this you can always send me a pm. I may not post in this thread that often but i am always on GH.
Is that a brass weight on the bottom?
That looks to be another case, pretty sure a weight was descussed during the interest check and decided against.
My only question is what the colors will look like with the polish finish...? Of course, looks sick on silver, but can't quite picture a mirror finish on black or pink. Any samples of that?
The polish isn't for finish; think of it like sanding down wood before staining, or adding primer before painting something. It aids the annode in color reproduction, allows smaller beads for anode (smoother finish), and more consistency across the surface. The finish will be normal anode-like, not glossy. Hope that helps :thumb:
Sent from my iPhone using Tapatalk
Ahh you are right. Looks like a 65% case. Must be a proto. Damn.. I got excitedHi Everyone
A little update here. We have finished the CNC for RJ. But there will be a delay because we have made a decision to use a improved polish shop.
This is something new we just tried and this polish is really good. Although this will cost more money than excepted but we just want to use the best we could.Anyway i won't charge you guys anything but unfortunately this is done by hands so there will be a delay. I am not sure how long at this moment,i assume it will be a month at top.
Here are some pictures of a sample we tried. All RJ kits will be polished like this:
(Attachment Link)
(Attachment Link)
If you have any question about this you can always send me a pm. I may not post in this thread that often but i am always on GH.
Is that a brass weight on the bottom?
That looks to be another case, pretty sure a weight was descussed during the interest check and decided against.
Sent from my SM-G955U using Tapatalk
Is that a brass weight on the bottom?
Revo, please say that there are people out there, who have yet to pay and I can jump on the hype train. I really like how much effort you put into RJ.I'll let you know if there is a spot opened. Right now there is no one want to transfer their spot.
Revo, did Originative.co order any extras to sell?Revo, please say that there are people out there, who have yet to pay and I can jump on the hype train. I really like how much effort you put into RJ.I'll let you know if there is a spot opened. Right now there is no one want to transfer their spot.
Put me on the waiting list, too, please!
No,there will 0 leftovers for sell.But he ordered one for himself. :D :D :DRevo, did Originative.co order any extras to sell?Revo, please say that there are people out there, who have yet to pay and I can jump on the hype train. I really like how much effort you put into RJ.I'll let you know if there is a spot opened. Right now there is no one want to transfer their spot.
Me too please, kind sir.Put me on the waiting list, too, please!
Okay,you are on the waiting list now,sir.
Put me on the waiting list, too, please!
Okay,you are on the waiting list now,sir.
Me too!
Sent from my iPhone using Tapatalk
Add me as well please!
Me too please, kind sir.
Hi,Everyone
This is something we have all been waiting for.I am so hyped to say we are alive now!
Some of you may not familiar with this,see IC thread:
https://geekhack.org/index.php?topic=86279.0 (https://geekhack.org/index.php?topic=86279.0)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
MOQ:
50 kits in total
Features:
Aluminum 6063
Macbook level anode
ISO support
8 degree slope
Fully Programmable
Full LED backlighting
The kit will include:
Upper and lower case
Plate(one alu,one PC)
PCB
Acylic diffuser
Titanium Screws and rubber mat
Screw-in Stabs made by REVO(need 100 order or more)
Case Colors:
Black
SILVER
PINK
GRAY
BLUE-GRAY
Time-line:
Lead time: About 3 month.
GB and payment start 7th April and end in 21th April.
CNC start by the end of April and will be finish before June (color can be changed before anode)
Anode start in early June and finish in June.
Packing and shipping in July.
I can't promise it won't be delay,but i will do my best to avoid any kind of delay.
Price:
$350 each kit
Shipping:$50 for one kit( worldwide with tracking ) $85 for 2 kits,etc
Paypal fee:5%($20 for one kit,)
About payment: If someone can't pay it before GB ends.You can pm me and put down a $50 deposit(nonrefundable) and have 2 more weeks to pay. If you can't pay in one months then i will not refund the $50 deposit and sell your spot. There will be no way to transfer your spot if you just put down the deposit.
About the Apple anode. We use the factory that anode Macbook not iphone. And the color is not the same as Apple product. But i can say the quality is there.We are using the samething doing Macbook. Just want to make sure we don't have any problem. If you are looking for iphone level that nobody can do.
A special box will be made for this kit(if we can hit moq).
Screw-in stabs(Made by Revo) will be given if we hit 100 kits
Order here:
https://goo.gl/forms/NNMFcEth0FAM9Vlv2 (https://goo.gl/forms/NNMFcEth0FAM9Vlv2)
North America buyer can go here to save some shipping cost: https://originative.co/products/revo-hhkb-rj-kit (https://originative.co/products/revo-hhkb-rj-kit)
Hi,Everyone
This is something we have all been waiting for.I am so hyped to say we are alive now!
Some of you may not familiar with this,see IC thread:
https://geekhack.org/index.php?topic=86279.0 (https://geekhack.org/index.php?topic=86279.0)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
MOQ:
50 kits in total
Features:
Aluminum 6063
Macbook level anode
ISO support
8 degree slope
Fully Programmable
Full LED backlighting
The kit will include:
Upper and lower case
Plate(one alu,one PC)
PCB
Acylic diffuser
Titanium Screws and rubber mat
Screw-in Stabs made by REVO(need 100 order or more)
Case Colors:
Black
SILVER
PINK
GRAY
BLUE-GRAY
Time-line:
Lead time: About 3 month.
GB and payment start 7th April and end in 21th April.
CNC start by the end of April and will be finish before June (color can be changed before anode)
Anode start in early June and finish in June.
Packing and shipping in July.
I can't promise it won't be delay,but i will do my best to avoid any kind of delay.
Price:
$350 each kit
Shipping:$50 for one kit( worldwide with tracking ) $85 for 2 kits,etc
Paypal fee:5%($20 for one kit,)
About payment: If someone can't pay it before GB ends.You can pm me and put down a $50 deposit(nonrefundable) and have 2 more weeks to pay. If you can't pay in one months then i will not refund the $50 deposit and sell your spot. There will be no way to transfer your spot if you just put down the deposit.
About the Apple anode. We use the factory that anode Macbook not iphone. And the color is not the same as Apple product. But i can say the quality is there.We are using the samething doing Macbook. Just want to make sure we don't have any problem. If you are looking for iphone level that nobody can do.
A special box will be made for this kit(if we can hit moq).
Screw-in stabs(Made by Revo) will be given if we hit 100 kits
Order here:
https://goo.gl/forms/NNMFcEth0FAM9Vlv2 (https://goo.gl/forms/NNMFcEth0FAM9Vlv2)
North America buyer can go here to save some shipping cost: https://originative.co/products/revo-hhkb-rj-kit (https://originative.co/products/revo-hhkb-rj-kit)
So are you making fake versions of my work and posting it here?
https://geekhack.org/index.php?action=dlattach;topic=88750.0;attach=165096;image
Hi,Everyone
This is something we have all been waiting for.I am so hyped to say we are alive now!
Some of you may not familiar with this,see IC thread:
https://geekhack.org/index.php?topic=86279.0 (https://geekhack.org/index.php?topic=86279.0)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
MOQ:
50 kits in total
Features:
Aluminum 6063
Macbook level anode
ISO support
8 degree slope
Fully Programmable
Full LED backlighting
The kit will include:
Upper and lower case
Plate(one alu,one PC)
PCB
Acylic diffuser
Titanium Screws and rubber mat
Screw-in Stabs made by REVO(need 100 order or more)
Case Colors:
Black
SILVER
PINK
GRAY
BLUE-GRAY
Time-line:
Lead time: About 3 month.
GB and payment start 7th April and end in 21th April.
CNC start by the end of April and will be finish before June (color can be changed before anode)
Anode start in early June and finish in June.
Packing and shipping in July.
I can't promise it won't be delay,but i will do my best to avoid any kind of delay.
Price:
$350 each kit
Shipping:$50 for one kit( worldwide with tracking ) $85 for 2 kits,etc
Paypal fee:5%($20 for one kit,)
About payment: If someone can't pay it before GB ends.You can pm me and put down a $50 deposit(nonrefundable) and have 2 more weeks to pay. If you can't pay in one months then i will not refund the $50 deposit and sell your spot. There will be no way to transfer your spot if you just put down the deposit.
About the Apple anode. We use the factory that anode Macbook not iphone. And the color is not the same as Apple product. But i can say the quality is there.We are using the samething doing Macbook. Just want to make sure we don't have any problem. If you are looking for iphone level that nobody can do.
A special box will be made for this kit(if we can hit moq).
Screw-in stabs(Made by Revo) will be given if we hit 100 kits
Order here:
https://goo.gl/forms/NNMFcEth0FAM9Vlv2 (https://goo.gl/forms/NNMFcEth0FAM9Vlv2)
North America buyer can go here to save some shipping cost: https://originative.co/products/revo-hhkb-rj-kit (https://originative.co/products/revo-hhkb-rj-kit)
So are you making fake versions of my work and posting it here?
https://geekhack.org/index.php?action=dlattach;topic=88750.0;attach=165096;image
Hold your horses there, bud.
Making accusations like that on a public thread doesn't anything unless you're trying to start trouble.
That picture was not taken by Revo (Raymond), from what I recall it was someone who purchased his board via the original small group buy, and posted the pictures on a website.
Raymond is a pretty honest guy, in fact he tries his best to ensure his stuff isn't a replica of other things.
Apologies if my tone seems rude, I just can't believe how easily people attack each other on GeekHack. Especially Raymond of all people. He's a very upfront and honest person.
Hold your horses there, bud.
Making accusations like that on a public thread doesn't do anything unless you're trying to stir up trouble.
That picture was not taken by Revo (Raymond), from what I recall it was someone who purchased his board via the original small group buy, and posted the pictures on a website.
Raymond is a pretty honest guy, in fact he tries his best to ensure his stuff isn't a replica of other things.
Apologies if my tone seems rude, I just can't believe how easily people attack each other before talking via pm. Especially Raymond of all people. He's a very upfront and honest person.
TLDR; He didn't copy your artisans, he doesn't make any.
*Edited a few things for clarity since I was in a rush.
So are you making fake versions of my work and posting it here?
https://geekhack.org/index.php?action=dlattach;topic=88750.0;attach=165096;image
Since everybody is here. A little update would be nice.
Factory told me polish will be finished around 25th July. So i will take some days off around that. Will talk to my boss tomorrow about a leave and book plane ticket to Shenzhen.
If everything goes well, shipping will start by the end of this month or early next month.
Thanks everyone :D have a nice day!
Quote
So are you making fake versions of my work and posting it here?
https://geekhack.org/index.php?action=dlattach;topic=88750.0;attach=165096;image (https://geekhack.org/index.php?action=dlattach;topic=88750.0;attach=165096;image)
No,sir. If you read the IC thread this picture is take by someone who bought this kit before. I don't know where he gets this keycaps, i haven't notice it before now. Sorry i dont have a thing for artisan keycaps.I have no idea this is a copy of your keycap.
I never do artisan keycaps.And I will never do artisan keycaps. I only interested in making metal keyboard kit.
I also hate to copy other's work. So i can understand your feeling.
If you dont believe me you can ask around. I never sell any artisan keycaps.
It's middle of the night here in China so i am going to bed. Have a nice day ;D
they just phoned me couple hours ago and i want to update this when i have accurate date. I am not sure when can i have a leave since this is something new and we need to supervise this so there won't be any flaws. I will update again when i have something more accurate.Since everybody is here. A little update would be nice.
Factory told me polish will be finished around 25th July. So i will take some days off around that. Will talk to my boss tomorrow about a leave and book plane ticket to Shenzhen.
If everything goes well, shipping will start by the end of this month or early next month.
Thanks everyone :D have a nice day!
Great news, thanks for the update Raymond!! Can't wait to build my RJ up!!
they just phoned me couple hours ago and i want to update this when i have accurate date. I am not sure when can i have a leave since this is something new and we need to supervise this so there won't be any flaws. I will update again when i have something more accurate.Since everybody is here. A little update would be nice.
Factory told me polish will be finished around 25th July. So i will take some days off around that. Will talk to my boss tomorrow about a leave and book plane ticket to Shenzhen.
If everything goes well, shipping will start by the end of this month or early next month.
Thanks everyone :D have a nice day!
Great news, thanks for the update Raymond!! Can't wait to build my RJ up!!
从我的 iPhone 发送,使用 Tapatalk
Since everybody is here. A little update would be nice.
Factory told me polish will be finished around 25th July. So i will take some days off around that. Will talk to my boss tomorrow about a leave and book plane ticket to Shenzhen.
If everything goes well, shipping will start by the end of this month or early next month.
Thanks everyone :D have a nice day!
Can anyone explain the difference between B.fake and B.face? Also, will the Revo stabs be screw stabs? Same tightness and stability that Zeals have?
Can anyone explain the difference between B.fake and B.face? Also, will the Revo stabs be screw stabs? Same tightness and stability that Zeals have?
Stabs should be the same. b.fake is just a fake of bface... ;D
Same led and stuff. stabs is screw-in. ;D ;D ;D
Same LED's and everything? Also, are the stabs screw in? I know you said they're the same but I wasn't sure if you were talking about feel or design. Thanks!
Which USB connector do the B.Fake use? I want to get a cable made before this arrives.mini-usb port. if you want to make you own cable please notice that the mini port size is 11mm*7mm.
FWIW, the issue was addressed and resolved amicably in about an hour, and then dragged on for literally an entire day by you all. :rolleyes:
FWIW, the issue was addressed and resolved amicably in about an hour, and then dragged on for literally an entire day by you all. :rolleyes:
If you consider accusations and insults "amicable", I guess you're right.
Thanks for defending me here,and i really appreciate it. I think he is a little aggressive because he can't do anything with the copycats unless the whole community stop buying from them. Only thing he can is be strong with copycats whenever he sees one. Only this time he made a mistake thinking me as one. anyway i dont blame him. Let's move on.
Let's talk something about RJ. I have cut 2 orders who didnt pay me until now and 2 ppl on the waiting have brought them,factory told me they did 3 more kits today and i have contact 3 more ppl on the waiting list. If there's something left i will post here.
Right on, Raymond. You know there's a lot of love for you on GH.
Those are 5 lucky folks getting into a RJ- congrats!
Any new pics of the improved finish you can share?
Quote
Right on, Raymond. You know there's a lot of love for you on GH.
Those are 5 lucky folks getting into a RJ- congrats!
Any new pics of the improved finish you can share?
l will show more pics when i get to the factory. The worker take really poor pictures. I have some pictures of how RJ made for you guys!
I am asking for pictures to do a IC thread this weekend. Stay tuned. ;D ;D
Ooooh, you tease! A new IC?? Any hints as to what it may be?
(Please say 96-key!?!)
Please stay on topic guys. Don't say anything mean. We have solve that problem so please let's move on. Even i know autistic is a really bad word. Let's not using words like that. or attack any person. Please !!!
Please stay on topic guys. Don't say anything mean. We have solve that problem so please let's move on. Even i know autistic is a really bad word. Let's not using words like that. or attack any person. Please !!!
I cleaned up this thread a bit after the derailing. Seriously people, there's no need to attack each other and throw insults around - keep the thread on topic. Warnings will be handed out where applicable.
I'm pretty hyped about this now. Was able to get a spot!
I'm pretty hyped about this now. Was able to get a spot!
Awesome man, congrats! My most anticipated board of the year.
Anyone know where I can get a Yarbo cable for this?There's no Yarbo made for this one. You just need a normal cable....
Yeah, I know. I just wanted to find a Yarbo USB. I know there isn't one with this like there was with the Dr
Can anyone explain the main difference when using a tray mount? Is it just a complete lack of flex? Are there any other differences?
Would you say it's similar in terms of feel to something like a Clueboard which uses a 'superplate' The plate is carved out of the top half of the case. There is 0 flex.
shipping will start around 5th August
shipping will start around 5th August
shipping will start around 5th August
shipping will start around 5th August
shipping will start around 5th August
I should get my switches and things ready. :confused:
shipping will start around 5th August
I should get my switches and things ready. :confused:
Switches, LEDs if needed. Keycaps. other than this, you won't need anything... ;D ;D ;D
I ordered 2 of these through Originative, one black and one gray. I was wondering if anyone out there that ordered a silver would be open to trading me for my gray? Just throwing this out there! :)
I ordered 2 of these through Originative, one black and one gray. I was wondering if anyone out there that ordered a silver would be open to trading me for my gray? Just throwing this out there! :)
I have a silver. It's a maybe from me. Need to see the silver in person. Really excited it'll be shipping soon! Have my switches and lube ready with a cable on the way.
I just realized I'll have to wait on the build. :'( Linear zealios aren't out yet. Unless someone wants to sell me some from the first run. :p
But Tiffany stems...I just realized I'll have to wait on the build. :'( Linear zealios aren't out yet. Unless someone wants to sell me some from the first run. :p
Gateron black + krytox = best linear switch you're ever going to get.
I just realized I'll have to wait on the build. :'( Linear zealios aren't out yet. Unless someone wants to sell me some from the first run. :p
Gateron black + krytox = best linear switch you're ever going to get.
I was going to get some of the new Zeal linears buuuuuutt.... I already have Zealio 67g and Gat Black and Vin Black stems so I am good.I just realized I'll have to wait on the build. :'( Linear zealios aren't out yet. Unless someone wants to sell me some from the first run. :p
Gateron black + krytox = best linear switch you're ever going to get.
I've had boards with those switches but found myself still preferring the Round 1 linear Zealios.
I just realized I'll have to wait on the build. :'( Linear zealios aren't out yet. Unless someone wants to sell me some from the first run. :p
Gateron black + krytox = best linear switch you're ever going to get.
TBH, never tried Gateron black... are they smooth? I am a fan of vintage blacks...
I just realized I'll have to wait on the build. :'( Linear zealios aren't out yet. Unless someone wants to sell me some from the first run. :p
Gateron black + krytox = best linear switch you're ever going to get.
I've had boards with those switches but found myself still preferring the Round 1 linear Zealios.
Agreed. lube new mx black is the worst idea...I just realized I'll have to wait on the build. :'( Linear zealios aren't out yet. Unless someone wants to sell me some from the first run. :p
Gateron black + krytox = best linear switch you're ever going to get.
I've had boards with those switches but found myself still preferring the Round 1 linear Zealios.
That's because lubing already smooth switches has a negative effect ;D
Anyone want to change address please send an email to Raymondwu89@gmail.com
I will using paypal address to ship this,so if your paypal address is wrong or anything,please send me an email.
I will leave on Monday to see the anode and prepare everyone's order. In the meantime i may not be able to reply pms or email quickly once i am starting packing and shipping everything. so just please wait patiently for me to pm you the tracking info.
Thanks everyone, you all been nice to me and i really appreciate all your support.
Anyone want to change address please send an email to Raymondwu89@gmail.com
I will using paypal address to ship this,so if your paypal address is wrong or anything,please send me an email.
I will leave on Monday to see the anode and prepare everyone's order. In the meantime i may not be able to reply pms or email quickly once i am starting packing and shipping everything. so just please wait patiently for me to pm you the tracking info.
Thanks everyone, you all been nice to me and i really appreciate all your support.
Some update here:
I am in Shenzhen now and we are doing a little bit color testing now. We will try to make a sample for each color now and see if it's good or not.
Here's a sample of color grey. And i will do a little adjustment for it.
(Attachment Link)
Some update here:
I am in Shenzhen now and we are doing a little bit color testing now. We will try to make a sample for each color now and see if it's good or not.
Here's a sample of color grey. And i will do a little adjustment for it.
(Attachment Link)
Some update here:
I am in Shenzhen now and we are doing a little bit color testing now. We will try to make a sample for each color now and see if it's good or not.
Here's a sample of color grey. And i will do a little adjustment for it.
(Attachment Link)
Some update here:
I am in Shenzhen now and we are doing a little bit color testing now. We will try to make a sample for each color now and see if it's good or not.
Here's a sample of color grey. And i will do a little adjustment for it.
(Attachment Link)
Thanks for the updates. Hyped to see some pink. :p
Pink is here,but it's too light. Need some adjustment as well :D :D
(Attachment Link)
(Attachment Link)
Pink is here,but it's too light. Need some adjustment as well :D :D
(Attachment Link)
(Attachment Link)
Piiinnnkkkk :-*
Ship out all the silvers and blacks. The pinks can wait :P
Ship out all the silvers and blacks. The pinks can wait :P
I most definitely agree with this sentiment :))
Hey all,
I don't remember when I first thought this up, but I want to use a SS plate for my Revo RJ, and I was thinking some of you might want to do the same since it wasn't offered in the original GB.
I am thinking about contacting lasergist to see what kind of prices they could offer for a SS group buy (if they offer any price drops at all)
If you're interested let me know and I'll see what lasergist might be able to offer :)
Also, question for you Revo: if there is enough interest, would it be possible to get the plate design you used so we can keep the design consistent?
Cheers,
Gnmar2723
Hey all,Yep ill find the plate file for you. Please pm me.
I don't remember when I first thought this up, but I want to use a SS plate for my Revo RJ, and I was thinking some of you might want to do the same since it wasn't offered in the original GB.
I am thinking about contacting lasergist to see what kind of prices they could offer for a SS group buy (if they offer any price drops at all)
If you're interested let me know and I'll see what lasergist might be able to offer :)
Also, question for you Revo: if there is enough interest, would it be possible to get the plate design you used so we can keep the design consistent?
Cheers,
Gnmar2723
Hey all,Yep ill find the plate file for you. Please pm me.
I don't remember when I first thought this up, but I want to use a SS plate for my Revo RJ, and I was thinking some of you might want to do the same since it wasn't offered in the original GB.
I am thinking about contacting lasergist to see what kind of prices they could offer for a SS group buy (if they offer any price drops at all)
If you're interested let me know and I'll see what lasergist might be able to offer :)
Also, question for you Revo: if there is enough interest, would it be possible to get the plate design you used so we can keep the design consistent?
Cheers,
Gnmar2723
从我的 iPhone 发送,使用 Tapatalk
Sorry i havent been around lately. It's been crazy busy. Shipping will start next week. Just need more time for anode.
Sorry i havent been around lately. It's been crazy busy. Shipping will start next week. Just need more time for anode.
Sorry i havent been around lately. It's been crazy busy. Shipping will start next week. Just need more time for anode.
Sorry i havent been around lately. It's been crazy busy. Shipping will start next week. Just need more time for anode.
Any idea how long it usually takes to arrive once it's been shipped? (US). Didn't order through Originative.
I was reading a bit on Xondat's X60 thread and noticed that some people were having some issues with USB port fitment with the Zeal60 PCB. I don't know if it will affect the RJ, but worth throwing out there. I've been debating on using a Zeal60 with this, but have been reluctant to because of some of the fitment talk. Anyone who is planning on using one (I'm sure you will, but I'm going to ask anyway), could you post your experience and which revision of the PCB you used? (I have a Zeal60 R1, but it's in another board)
Update here:
Just finished testing the box we made... It's soild enough for shipping. So we will start shipping from tomorrow or the day after tomorrow when boxes are finished. Tracking will be filled in paypal when i got time for it.
Thanks for the patience.
(Attachment Link)
Update here:
Just finished testing the box we made... It's soild enough for shipping. So we will start shipping from tomorrow or the day after tomorrow when boxes are finished. Tracking will be filled in paypal when i got time for it.
Thanks for the patience.
(Attachment Link)
Update here:
Just finished testing the box we made... It's soild enough for shipping. So we will start shipping from tomorrow or the day after tomorrow when boxes are finished. Tracking will be filled in paypal when i got time for it.
Thanks for the patience.
(Attachment Link)
I'm going to college on Wednesday, so I won't see this for a few months :'(I can ship it to your college if you want. :p :p :p
I'm going to college on Wednesday, so I won't see this for a few months :'(I can ship it to your college if you want. :p :p :p
Update here:
Just finished testing the box we made... It's soild enough for shipping. So we will start shipping from tomorrow or the day after tomorrow when boxes are finished. Tracking will be filled in paypal when i got time for it.
Thanks for the patience.
(Attachment Link)
Update here:
Just finished testing the box we made... It's soild enough for shipping. So we will start shipping from tomorrow or the day after tomorrow when boxes are finished. Tracking will be filled in paypal when i got time for it.
Thanks for the patience.
(Attachment Link)
Thank you Raymond!
Any new pics Raymond? :cool:(https://uploads.tapatalk-cdn.com/20170817/dfd4bcc66ec2edfba17c67a55f4cc6bb.jpg)
Any new pics Raymond? :cool:(https://uploads.tapatalk-cdn.com/20170817/dfd4bcc66ec2edfba17c67a55f4cc6bb.jpg)
Any new pics Raymond? :cool:(https://uploads.tapatalk-cdn.com/20170817/dfd4bcc66ec2edfba17c67a55f4cc6bb.jpg)
Any new pics Raymond? :cool:Show Image(https://uploads.tapatalk-cdn.com/20170817/dfd4bcc66ec2edfba17c67a55f4cc6bb.jpg)Show Image(https://uploads.tapatalk-cdn.com/20170817/3d98242ffed0757fd79ac67e70bbefad.jpg)
Here some new pics. Will start shipping everything tomorrow. Stay tuned!
从我的 iPhone 发送,使用 Tapatalk
Any new pics Raymond? :cool:Show Image(https://uploads.tapatalk-cdn.com/20170817/dfd4bcc66ec2edfba17c67a55f4cc6bb.jpg)Show Image(https://uploads.tapatalk-cdn.com/20170817/3d98242ffed0757fd79ac67e70bbefad.jpg)
Here some new pics. Will start shipping everything tomorrow. Stay tuned!
从我的 iPhone 发送,使用 Tapatalk
Any new pics Raymond? :cool:Show Image(https://uploads.tapatalk-cdn.com/20170817/dfd4bcc66ec2edfba17c67a55f4cc6bb.jpg)Show Image(https://uploads.tapatalk-cdn.com/20170817/3d98242ffed0757fd79ac67e70bbefad.jpg)
Here some new pics. Will start shipping everything tomorrow. Stay tuned!
从我的 iPhone 发送,使用 Tapatalk
Any new pics Raymond? :cool:Show Image(https://uploads.tapatalk-cdn.com/20170817/dfd4bcc66ec2edfba17c67a55f4cc6bb.jpg)Show Image(https://uploads.tapatalk-cdn.com/20170817/3d98242ffed0757fd79ac67e70bbefad.jpg)
Here some new pics. Will start shipping everything tomorrow. Stay tuned!
从我的 iPhone 发送,使用 Tapatalk
Any new pics Raymond? :cool:Show Image(https://uploads.tapatalk-cdn.com/20170817/dfd4bcc66ec2edfba17c67a55f4cc6bb.jpg)Show Image(https://uploads.tapatalk-cdn.com/20170817/3d98242ffed0757fd79ac67e70bbefad.jpg)
Here some new pics. Will start shipping everything tomorrow. Stay tuned!
从我的 iPhone 发送,使用 Tapatalk
Ooooooh pretty. Can we get some 360 degree shots? I am very interested to see what the back looks like!
So stoked to receive this!
If anyone with a silver case would prefer gray, I'd be interested in trading! :)
If anyone with a silver case would prefer gray, I'd be interested in trading! :)
The grey gonna look soooo goood
[/quote
I'm in love with both actually... :p
Shipping started? When will oco get the boards for US people?Yes, shipping have started. oco order will be shipping later after i sort everything out.
Sent from my iPhone using Tapatalk
Since my order was one of the three extras, would oco still handle mine since I am in the US or will you be shipping that one to me? Thanks!Shipping started? When will oco get the boards for US people?Yes, shipping have started. oco order will be shipping later after i sort everything out.
Sent from my iPhone using Tapatalk
Shipping started? When will oco get the boards for US people?Yes, shipping have started. oco order will be shipping later after i sort everything out.
Sent from my iPhone using Tapatalk
Shipping started? When will oco get the boards for US people?Yes, shipping have started. oco order will be shipping later after i sort everything out.
Sent from my iPhone using Tapatalk
HYPE
Glad I stuck with Raymond and he's shipping mine. :p
Glad I stuck with Raymond and he's shipping mine. :p
So only the US orders going directly through Oco haven't shipped? The others have?
Glad I stuck with Raymond and he's shipping mine. :p
That's what I should have done.. ;~;
Glad I stuck with Raymond and he's shipping mine. :pSo only the US orders going directly through Oco haven't shipped? The others have?Glad I stuck with Raymond and he's shipping mine. :p
That's what I should have done.. ;~;
I was all about saving that extra $20.00 at the time haha
I am shipping all the orders paid to me first and then orders from oco. But right now,typhoon in Shenzhen and nothing can be shipped out for a couple of days.Thanks Raymond!
btw,this is the black you guys asking for..
I am shipping all the orders paid to me first and then orders from oco. But right now,typhoon in Shenzhen and nothing can be shipped out for a couple of days.
btw,this is the black you guys asking for..
Waiting for typhoon to go away and we can start shipping this babies
Just want to ask everybody to be a little more patient.I know you all have waited for a long time. I can only say i will ship these out as soon as i can.
(Attachment Link)
Anybody looking to get rid of their PCB?
Anybody looking to get rid of their PCB?
It's poker layout, you can use any PCB with it.
Hey everybody,thanks, man I really appreciate your work
I hope your're as hyped for this board as I am :cool:
Today I have a little update for the SS Plates that AlexAtPanc and I have been working on: We're live!!
- They will not be in the same style as revo, but rather universal layout. (http://i.imgur.com/5vTKW8o.jpg)
- They will have a brushed finish.
- Cost is $26 per plate plus $8 for shipping via USPS (I'm not sure if this holds true for international however. Please leave a note in the form and Alex will let you know)
Form: HERE (https://docs.google.com/forms/d/1O_QaFZieoPIPUK4kT16LXMt1cYRKq11qi-crnKQswRI/viewform?edit_requested=true)
If you've got any other questions let either Alex or myself know!
Cheers,
gnmar2723
Hey everybody,
I hope your're as hyped for this board as I am :cool:
Today I have a little update for the SS Plates that AlexAtPanc and I have been working on: We're live!!
- They will not be in the same style as revo, but rather universal layout. (http://i.imgur.com/5vTKW8o.jpg)
- They will have a brushed finish.
- Cost is $26 per plate plus $8 for shipping via USPS (I'm not sure if this holds true for international however. Please leave a note in the form and Alex will let you know)
Form: HERE (https://docs.google.com/forms/d/1O_QaFZieoPIPUK4kT16LXMt1cYRKq11qi-crnKQswRI/viewform?edit_requested=true)
If you've got any other questions let either Alex or myself know!
Cheers,
gnmar2723
I would be a buyer if I could get it in the same layout as the board. I'm not interested in a universal layout for an HHKB board.
Plate will only work with Revo rj correct, not universal 60% case?
Plate will only work with Revo rj correct, not universal 60% case?
Plate will only work with Revo rj correct, not universal 60% case?
Does the Revo PCB support a stepped CapsLock/Control key?
Does the Revo PCB support a stepped CapsLock/Control key?you can program it. :D :D :D
Does the Revo PCB support a stepped CapsLock/Control key?Show Image(https://geekhack.org/index.php?action=dlattach;topic=86279.0;attach=154976;image)
Does the Revo PCB support a stepped CapsLock/Control key?Show Image(https://geekhack.org/index.php?action=dlattach;topic=86279.0;attach=154976;image)
Wish I had the royal TA to complement my silver Revo RJ D:
Dear god... I can't wait for this beauty to get shipped :eek:
How's the quality on the Revo & Dr. D? :DDear god... I can't wait for this beauty to get shipped :eek:
No joke. Been using my Dr. D this week in Revo-filled anticipation. Know Raymond is going to deliver us some champion HHKB's soon enough.
How's the quality on the Revo & Dr. D? :DDear god... I can't wait for this beauty to get shipped :eek:
No joke. Been using my Dr. D this week in Revo-filled anticipation. Know Raymond is going to deliver us some champion HHKB's soon enough.
How's the quality on the Revo & Dr. D? :DDear god... I can't wait for this beauty to get shipped :eek:
No joke. Been using my Dr. D this week in Revo-filled anticipation. Know Raymond is going to deliver us some champion HHKB's soon enough.
It's a really nice board. Very smooth anodizing and I love the aesthetic with the different color for the middle piece. I know Raymond wasn't 100% happy with the all of the anodizing, but he is a perfectionist and that just means RJ is going to be stunning. Dude has awesome quality standards.
I'm curious to see how sought after the RJ will be compared to the Duck Viper. I have no plans on actually selling it, but just wondering. If I understand the numbers correctly there are less RJs than Vipers. And if I read correctly, Raymond has no intent of reproducing this board? Any speculation? Not necessarily interested in comparing dollar values, but more just how wanted these will be (so I can feel special or whatever)
I'm curious to see how sought after the RJ will be compared to the Duck Viper. I have no plans on actually selling it, but just wondering. If I understand the numbers correctly there are less RJs than Vipers. And if I read correctly, Raymond has no intent of reproducing this board? Any speculation? Not necessarily interested in comparing dollar values, but more just how wanted these will be (so I can feel special or whatever)Well the Viper is a korean custom, and kustoms typically hold their value better than chinese customs. The demand for duck vipers is pretty ridiculous though, duck quality falling far behind other korean brands like otd, lz, tx, etc (I believe most members of the community who own these boards will agree with me). Being said I don't believe anything can compare to the RJ in terms of anodization quality, supposedly (we haven't held our boards yet). With this being a limited run while featuring things like hand polishing pre-anode and apple quality anode I am very curious to see wether its aftermarket value either holds or increases exponentially. However, due to its tray mount nature, among other things, I doubt it will be higher in aftermarket value than a kustom like the duck viper. Although I have a feeling the pink RJ will be the most sought after variation. Sucks that just being a board from a korean manufacturer elevates it above something like the RJ. But I could be wrong, who knows ¯\_(ツ)_/¯
I'm curious to see how many RJ's there are in each color.I remember hearing that the most popular was Gray (that is what I got). I would be interested to know the color numbers too.
I'm curious to see how sought after the RJ will be compared to the Duck Viper. I have no plans on actually selling it, but just wondering. If I understand the numbers correctly there are less RJs than Vipers. And if I read correctly, Raymond has no intent of reproducing this board? Any speculation? Not necessarily interested in comparing dollar values, but more just how wanted these will be (so I can feel special or whatever)
I'm curious to see how sought after the RJ will be compared to the Duck Viper. I have no plans on actually selling it, but just wondering. If I understand the numbers correctly there are less RJs than Vipers. And if I read correctly, Raymond has no intent of reproducing this board? Any speculation? Not necessarily interested in comparing dollar values, but more just how wanted these will be (so I can feel special or whatever)
RJ is tray mount. Kills it for a lot of the higher-end buyers who pay the crazy prices.
The viper is also extremely overhyped.
How do you see if a case is either top-mount or tray-mounted?
I'm curious to see how sought after the RJ will be compared to the Duck Viper. I have no plans on actually selling it, but just wondering. If I understand the numbers correctly there are less RJs than Vipers. And if I read correctly, Raymond has no intent of reproducing this board? Any speculation? Not necessarily interested in comparing dollar values, but more just how wanted these will be (so I can feel special or whatever)
RJ is tray mount. Kills it for a lot of the higher-end buyers who pay the crazy prices.
The viper is also extremely overhyped.
I'm curious to see how sought after the RJ will be compared to the Duck Viper. I have no plans on actually selling it, but just wondering. If I understand the numbers correctly there are less RJs than Vipers. And if I read correctly, Raymond has no intent of reproducing this board? Any speculation? Not necessarily interested in comparing dollar values, but more just how wanted these will be (so I can feel special or whatever)
RJ is tray mount. Kills it for a lot of the higher-end buyers who pay the crazy prices.
The viper is also extremely overhyped.
It came down to this or the X60 for me and I went with RJ because it is tray mount. Will save me a lot of money, in the long run, when it comes to new builds etc.
Any updates?
Revo plz, Im dying from excitement.
My keycaps arrived, my switches arrived, Im all ready.
if anyone would like to take over my order, send me a pm
Pink case / silver plate
I ordered through oco so I believe we still have time to do a transfer.
if anyone would like to take over my order, send me a pm
Pink case / silver plate
I ordered through oco so I believe we still have time to do a transfer.
That should sell pretty quick. A lot of people want the pink.
Does the BFake use micro or mini USB?
Stoked to get this board. Can not wait to see pics. Who all has build done and ready?Boi this ****s been done for months
Anybody got their tracking yet?
So hyped for this :-X
For those of you who joined in the SS plate group buy that AlexAtPanc and myself are coordinating, you should have gotten an invoice as well as an email from Alex this evening. Let us know if there is anything incorrect with your order, or if you have any comments/concerns!
Hope everyone is looking forward to their boards! :thumb:
I asked Raymond a thing about the color and I am worried as no answer... my fault anyway... :_(
Sent from my iPhone using Tapatalk
Sorry for the MIA...i have shipped all GH's order... I will have tracking numbers in a few hours. Will fill them on Paypal...
Oco's order will be shipped ASAP after i check everything is in the box...
Well, the bad news is the grey color comes much lighter than i expected... I have make a very dark one to be color sample in the anode shop and they grey like this:
(Attachment Link)
If anybody ordered Grey and not pleased with this,let me know.I'll see what i can do.
And i am sorry for delay so here's a hand-made cable for everyone.(This is becoming a thing for me)
(Attachment Link)
[attachimg=1]Sorry for the MIA...i have shipped all GH's order... I will have tracking numbers in a few hours. Will fill them on Paypal...
Oco's order will be shipped ASAP after i check everything is in the box...
Well, the bad news is the grey color comes much lighter than i expected... I have make a very dark one to be color sample in the anode shop and they grey like this:
(Attachment Link)
If anybody ordered Grey and not pleased with this,let me know.I'll see what i can do.
And i am sorry for delay so here's a hand-made cable for everyone.(This is becoming a thing for me)
(Attachment Link)
Can you post a picture of the grey, black and silver next to each other?
I'm in for a grey, would like to see the difference.
Yeah, that gray looks fabulous to me, actually. Almost regret getting pink now. Almost.Pink is fabulous... You got no regrets...Trust me :thumb: :thumb: :thumb:
(Attachment Link)Sorry for the MIA...i have shipped all GH's order... I will have tracking numbers in a few hours. Will fill them on Paypal...
Oco's order will be shipped ASAP after i check everything is in the box...
Well, the bad news is the grey color comes much lighter than i expected... I have make a very dark one to be color sample in the anode shop and they grey like this:
(Attachment Link)
If anybody ordered Grey and not pleased with this,let me know.I'll see what i can do.
And i am sorry for delay so here's a hand-made cable for everyone.(This is becoming a thing for me)
(Attachment Link)
Can you post a picture of the grey, black and silver next to each other?
I'm in for a grey, would like to see the difference.
This will do?
Yeah, that gray looks fabulous to me, actually. Almost regret getting pink now. Almost.Pink is fabulous... You got no regrets...Trust me :thumb: :thumb: :thumb:
(Attachment Link)Sorry for the MIA...i have shipped all GH's order... I will have tracking numbers in a few hours. Will fill them on Paypal...
Oco's order will be shipped ASAP after i check everything is in the box...
Well, the bad news is the grey color comes much lighter than i expected... I have make a very dark one to be color sample in the anode shop and they grey like this:
(Attachment Link)
If anybody ordered Grey and not pleased with this,let me know.I'll see what i can do.
And i am sorry for delay so here's a hand-made cable for everyone.(This is becoming a thing for me)
(Attachment Link)
Can you post a picture of the grey, black and silver next to each other?
I'm in for a grey, would like to see the difference.
This will do?
Pics! :p
Got my switches and everything else ready to go, too. :thumb:
Wow! It looks great! Thanks for the cable, also!
Quote
Pics! :p
Got my switches and everything else ready to go, too. :thumb:
(Attachment Link)
I am going to sleep now. Pink just beautiful. My phone can't express the true color of it. You'll see it soon enough. Will have your tracking tomorrow for ya!
I'm ready :pShow Image(https://uploads.tapatalk-cdn.com/20170913/721abce507eca30112271c502f614a0f.jpg)
I'm ready :pShow Image(https://uploads.tapatalk-cdn.com/20170913/721abce507eca30112271c502f614a0f.jpg)
Nice! Whatcha got going on with that plate...? Polycarbonate? Brass? Copper? Can't tell if it's a little translucent or reflective.
I'm ready :pShow Image(https://uploads.tapatalk-cdn.com/20170913/721abce507eca30112271c502f614a0f.jpg)
Nice! Whatcha got going on with that plate...? Polycarbonate? Brass? Copper? Can't tell if it's a little translucent or reflective.
It's a HHKB Brass plate from mekanisk, sorry for my ****ty camera haha!
Switches are Vintage blacks with 68g gold springs heavily lubed and stickered :D
All I gotta do is clip the stabs and put my OG Ribbit on the ESC key and assemble that beauty :DI'm readyShow Image(https://uploads.tapatalk-cdn.com/20170913/721abce507eca30112271c502f614a0f.jpg)
Nice! Whatcha got going on with that plate...? Polycarbonate? Brass? Copper? Can't tell if it's a little translucent or reflective.
It's a HHKB Brass plate from mekanisk, sorry for my ****ty camera haha!
Switches are Vintage blacks with 68g gold springs heavily lubed and stickered :D
All good! I'm likely building mine up very similarly- have the same plate from Leandren in wait, it's really nice. Kudos to you for the advance prep- you're ready and waiting for the board to arrive. I always intend to work ahead and be organized, but that never happens.
Looking forward to seeing everyone's builds popping up soon.
I'm ready :pShow Image(https://uploads.tapatalk-cdn.com/20170913/721abce507eca30112271c502f614a0f.jpg)
Hey revo, is it possible for you to message me my tracking number? My old paypal account is terminated.PMed
Got tracking! Buuuutttt it's showing the wrong address. :'(don't worry. I see it as well. Was talking to them to get it changed
I got my tracking number today. What service is the proxy using? Can't figure it out.
Got tracking! Buuuutttt it's showing the wrong address. :'(don't worry. I see it as well. Was talking to them to get it changed
Raymond just on top of everything. You da man. Thanks! :-*
Quote
Raymond just on top of everything. You da man. Thanks! :-*
It turned out that i have miss typed the tracking number....there are too many of them...my bad...
I have changed it..just see if it's right for now
My tracking# seems to not be recognised by the website you linked, Raymond
Pls help
Gesendet von meinem SM-G920F mit Tapatalk
oh, they give the tracking yesterday... but i fall asleep, it should be working later today. I think...I'll keep monitoring them...Quote
Raymond just on top of everything. You da man. Thanks! :-*
It turned out that i have miss typed the tracking number....there are too many of them...my bad...
I have changed it..just see if it's right for now
I think the tracking is still updating, Raymond. The site isn't picking them up quite yet. We might have to wait a bit.
Oh, thanks for the quick infoMy tracking# seems to not be recognised by the website you linked, Raymond
Pls help
Gesendet von meinem SM-G920F mit Tapatalk
Europe's order is DHL. Try DHL,my friend.
Oh hmmm...weird. Guess we wait and see then. :))I just asked them,and they say we can see it tonight(Beijing time). Well,that means tomorrow for you guys
Well, RJ' GB is nearly finished. I am here to tell some unfortunate news about RJ.
1, plate have an error. The left shift can not be spilt. We just found out this mistake when everything is finished.(both alu and pc have this problem)
2, The wire(mainly 7u) in the stabs are oxided after 2 years in our warehouse.
Since i have about 16000 usd (From RJ) froze in Paypal. I have no power to re-do them.Sorry everybody have to suck it up. I may do something after i got the payment from Paypal,but for now there's nothing i can do.
(Attachment Link)
(Attachment Link)
(Attachment Link)
Dude, it's things like this that amaze me about what it takes to run a good GB. First off, frigging PayPal. You spent your own money I can assume to do this production for us while they hold your money for what? I don't imagine you had chargebacks the way we have seen in some other currently open buys. That sucks- frigging PayPal.
On the plates. Minor bugger, in my opinion. Many of us have brass plates ready to go. There was the ss plate that gnmar and AlexAtPanc ran and I imagine several joined. And I don't see split left shift HHKB layouts all that much, of course split right shift is a must...
On the stabs... nice cable > stabs any day for me.
Thanks for the honesty and letting us know of the issue. You're all good with me and I imagine most here, Raymond.
Stabs no big deal (they're extra anyways). And since the plate is universal I don't think its a deal breaker. I just want my board Raymond haha.
Sent from my iPhone using Tapatalk
Well, RJ' GB is nearly finished. I am here to tell some unfortunate news about RJ.
1, plate have an error. The left shift can not be spilt. We just found out this mistake when everything is finished.(both alu and pc have this problem)
2, The wire(mainly 7u) in the stabs are oxided after 2 years in our warehouse.
Since i have about 16000 usd (From RJ) froze in Paypal. I have no power to re-do them.Sorry everybody have to suck it up. I may do something after i got the payment from Paypal,but for now there's nothing i can do.
(Attachment Link)
(Attachment Link)
(Attachment Link)
Is there no other payment method?
Sucks to have issues, but neither of those really affect me much and the rest of it has gone so smoothly that it really doesn't matter. It was a buy for the whole kit, not just a plate!Yes, i will filled them through paypal. Few tracking didn't come back to me. Will have yours after the weekend,my friend.
As for tracking, do we get that through paypal?
Is there no other payment method?Well,in China we all use Alipay and Taobao(Alibaba). It much easier for us but much complicated for you guys. Hence paypal is the only way.But it's not friendly to me.....
I am also fine with ist. Have a brass plate on hand and the wire is to neglect.
My DHL tracking is working but the parcel hasn't been collected yet (Shipment information received: SINGAPORE - SINGAPORE). Since its DHL Express I hope to have it mid next week.
Thank you so much Raymond for your efforts and dedication!
Is there no other payment method?Well,in China we all use Alipay and Taobao(Alibaba). It much easier for us but much complicated for you guys. Hence paypal is the only way.But it's not friendly to me.....
I got my shipping notification! :D ;D
I was planning on doing split right shift and 7u space, so I think I should be OK even with the plate issue on the left shift.
Would it be possible to fix the oxidisation issue on the stabiliser wire with something like lemon juice? Or would it need more abrasive cleaning?
Is there no other payment method?Well,in China we all use Alipay and Taobao(Alibaba). It much easier for us but much complicated for you guys. Hence paypal is the only way.But it's not friendly to me.....
That sucks...
How does the paypal system work for online shops? Maybe that would make your life easier :-X
Is there no other payment method?Well,in China we all use Alipay and Taobao(Alibaba). It much easier for us but much complicated for you guys. Hence paypal is the only way.But it's not friendly to me.....
I think Alipay is actually international. I have it set up because I used Aliexpress, I'm in the UK. I don't know if that means I can make payments to your business though, but I assume it's fine?
QuoteI think Alipay is actually international. I have it set up because I used Aliexpress, I'm in the UK. I don't know if that means I can make payments to your business though, but I assume it's fine?
Yes, i can open a shop on Alibaba easily. And they only charge 1% fee when you using credit cards. And i dont have to froze the money. But i think it's hard to set up account for the most people? It's quite difficult i heard
Revo, is there any ETA for the Oco orders to ship out?Next week...I will post here when i ship out Oco orders
Revo, is there any ETA for the Oco orders to ship out?Next week...I will post here when i ship out Oco orders
Revo, is there any ETA for the Oco orders to ship out?Next week...I will post here when i ship out Oco orders
Show Image(https://puu.sh/xBgtQ/af24d8e596.jpg)
<3
Show Image(https://puu.sh/xBgtQ/af24d8e596.jpg)
<3
That was quick...How do you like it?
The anodization is amazing! I cant tell the difference between it and my macbook. The color is slightly different tho, but still good. Cant wait to build it tomorrow.
Can't believe I missed out on this, are extras available after everyone receives theirs?Don't believe any extras, and Raymond said no R2.
Can't believe I missed out on this, are extras available after everyone receives theirs?Don't believe any extras, and Raymond said no R2.
yes. Ture. You guys have no idea how hard it is to do anodizion. Many thing could go wrong. Especially when RJ is using a very small sand. So i probably won't do it again. Both me and the anode shop want to go through this again. Anyway they won't this again so it's not possible either.Can't believe I missed out on this, are extras available after everyone receives theirs?Don't believe any extras, and Raymond said no R2.
Ah yea, completely forgot about that.Can't believe I missed out on this, are extras available after everyone receives theirs?Don't believe any extras, and Raymond said no R2.
As if Oco didn't buy extras to sell as in-stock items at a healthy markup.
I don't think he did. Anyway he just told me there's 50 orders he got for me. I don't think there will be extras to sell. Even if there is won't be many.Can't believe I missed out on this, are extras available after everyone receives theirs?Don't believe any extras, and Raymond said no R2.
As if Oco didn't buy extras to sell as in-stock items at a healthy markup.
You can probably always count on someone buying it to sell at aftermarket prices. Just gotta look out for any.yeah. This is something i don't like but i can't do nothing about it.
(Attachment Link)
(Attachment Link)
I am ready...Truth to be told,i am just stressed. People are going to receive their RJ and i feel i haven't check every board that carefully and there are too many small thing i can do better...so here i am...what the better way to deal with it than assembly a keyboard. Right? Hope you guys love it!
Well, RJ' GB is nearly finished. I am here to tell some unfortunate news about RJ.
1, plate have an error. The left shift can not be spilt. We just found out this mistake when everything is finished.(both alu and pc have this problem)
2, The wire(mainly 7u) in the stabs are oxided after 2 years in our warehouse.
Since i have about 16000 usd (From RJ) froze in Paypal. I have no power to re-do them.Sorry everybody have to suck it up. I may do something after i got the payment from Paypal,but for now there's nothing i can do.
(Attachment Link)
(Attachment Link)
(Attachment Link)
I love your switches :eek: where did you buy them or how did you make them?
That plate looks great! I run HHKB so it is good with me, plus I ordered a brass. I have some extra stabs so no big deal. So stoked to get mine. Thanks for the updates and smooth GB. I am sorry about your PayPal troubles. I have been AFK the last few days, any update on when O.co orders will ship to them?
Quote
I love your switches :eek: where did you buy them or how did you make them?
Yes, i custom made them. I will bring a GB for that soon...
Just got my space grey board, excuse my language but it's pretty f**kin awesome. The anodization is delicious.
Side note - Raymond (or anyone else with the pcb), do you know if holtites will fit the pcb and if so what kind? I ignorantly ordered a bunch of these: https://kbdfans.cn/collections/keyboard-part/products/switch-led-hot-swap-32pcs and they definitely do not fit the board...
My dream would be to make this beast of board hotswappable.
Just got my space grey board, excuse my language but it's pretty f**kin awesome. The anodization is delicious.
Side note - Raymond (or anyone else with the pcb), do you know if holtites will fit the pcb and if so what kind? I ignorantly ordered a bunch of these: https://kbdfans.cn/collections/keyboard-part/products/switch-led-hot-swap-32pcs and they definitely do not fit the board...
My dream would be to make this beast of board hotswappable.
The case is amazing, but using a diffuser without a palm rest feels uncomfortable.Yes,sir the diffuser is a add-on so that's not really ideal. I recommend do not use diffuser.
Great! This is really helping! Thanks,manJust got my space grey board, excuse my language but it's pretty f**kin awesome. The anodization is delicious.
Side note - Raymond (or anyone else with the pcb), do you know if holtites will fit the pcb and if so what kind? I ignorantly ordered a bunch of these: https://kbdfans.cn/collections/keyboard-part/products/switch-led-hot-swap-32pcs and they definitely do not fit the board...
My dream would be to make this beast of board hotswappable.
According to https://deskthority.net/wiki/Holtite they work with the b fake pcb
The case is amazing, but using a diffuser without a palm rest feels uncomfortable.Yes,sir the diffuser is a add-on so that's not really ideal. I recommend do not use diffuser.
Yup, just letting everyone know so they dont have to disassemble the board again :p
Quote
Yup, just letting everyone know so they dont have to disassemble the board again :p
Oh, Thanks,man! Have you build your RJ yet?What keycaps will you put on it?
Oh, great how is pbt mixed abs feeling? Never try it before. But it's looking good!Quote
Yup, just letting everyone know so they dont have to disassemble the board again :p
Oh, Thanks,man! Have you build your RJ yet?What keycaps will you put on it?
I just put on some EnjoyPBT with GMK Cyan modifiers. Currently typing on it now :thumb:Show Image(https://imgur.com/EpD6zZs.jpg)
Oh, great how is pbt mixed abs feeling? Never try it before. But it's looking good!Quote
Yup, just letting everyone know so they dont have to disassemble the board again :p
Oh, Thanks,man! Have you build your RJ yet?What keycaps will you put on it?
I just put on some EnjoyPBT with GMK Cyan modifiers. Currently typing on it now :thumb:Show Image(https://imgur.com/EpD6zZs.jpg)
Just got my space grey board, excuse my language but it's pretty f**kin awesome. The anodization is delicious.
Side note - Raymond (or anyone else with the pcb), do you know if holtites will fit the pcb and if so what kind? I ignorantly ordered a bunch of these: https://kbdfans.cn/collections/keyboard-part/products/switch-led-hot-swap-32pcs and they definitely do not fit the board...
My dream would be to make this beast of board hotswappable.
Quote
Yup, just letting everyone know so they dont have to disassemble the board again :p
Oh, Thanks,man! Have you build your RJ yet?What keycaps will you put on it?
I just put on some EnjoyPBT with GMK Cyan modifiers. Currently typing on it now :thumb:Show Image(https://imgur.com/EpD6zZs.jpg)
https://imgur.com/gallery/fTEifQuote
Yup, just letting everyone know so they dont have to disassemble the board again :p
Oh, Thanks,man! Have you build your RJ yet?What keycaps will you put on it?
I just put on some EnjoyPBT with GMK Cyan modifiers. Currently typing on it now :thumb:Show Image(https://imgur.com/EpD6zZs.jpg)
Wow! So nice! Can you post a pic of the height difference between it and an hhkb?
https://imgur.com/gallery/fTEifQuote
Yup, just letting everyone know so they dont have to disassemble the board again :p
Oh, Thanks,man! Have you build your RJ yet?What keycaps will you put on it?
I just put on some EnjoyPBT with GMK Cyan modifiers. Currently typing on it now :thumb:Show Image(https://imgur.com/EpD6zZs.jpg)
Wow! So nice! Can you post a pic of the height difference between it and an hhkb?
Not sure if this is enough but here you go.
I wonder what the dimensions are. I am trying to get an artisan wrist rest (I know, its not good for ergo). @Raymond, do you have the dimensions?
I wonder what the dimensions are. I am trying to get an artisan wrist rest (I know, its not good for ergo). @Raymond, do you have the dimensions?
Past comments have the dimensions, it's somewhere in thr.....
QuoteHow high is it compared to a HHKB pro2? 🤔
Just measure it. It's 21 mm thick in the front. 37 in the back make it 8 degree slope. Hope this can help you. :thumb: :thumb: :thumb:
QuoteHow high is it compared to a HHKB pro2? 🤔
Just measure it. It's 21 mm thick in the front. 37 in the back make it 8 degree slope. Hope this can help you. :thumb: :thumb: :thumb:
Just found the quote here. Was this with the diffuser installed?
Wow that was a quick reply. So it seems the thickness in front would be 24-25mm with diffuser installed?Diffuser should 3mm...so 24mm or you should measure it yourself...
Thanks for the info. The kit is still on its way so I am just jumping the gun here. Much appreciatedJust measure it.. 25mm with diffuser... but i don't think it will make much difference...
Thanks again Raymond. Just wanted to get wrist rest ordered so everything will come together at the same time. Super excited. Your board looks amazing! :thumb:
BTW, are the stabs provided similar to Zeal stabs?yes, similar...you should seen it in the box...
BTW, are the stabs provided similar to Zeal stabs?yes, similar...you should seen it in the box...
I heard the Zeal stabs pop out easily when you remove keycaps, so I nvr try the stabs :x
BTW, are the stabs provided similar to Zeal stabs?yes, similar...you should seen it in the box...
I heard the Zeal stabs pop out easily when you remove keycaps, so I nvr try the stabs :x
BTW, are the stabs provided similar to Zeal stabs?yes, similar...you should seen it in the box...
I heard the Zeal stabs pop out easily when you remove keycaps, so I nvr try the stabs :x
Only the very first run of them the V2 ones are fine.
Show Image(https://i.imgur.com/BiZCpar.jpg)Show Image(https://i.imgur.com/3VjqfVT.jpg)
Finished mine
Are we supposed to use SF-Express after it's in the US for tracking? Or do they use USPS or something to deliver?
How is the typing experience on polycarb vs aluminum?
How is the typing experience on polycarb vs aluminum?
Curious about this as well. I have a brass hhkb plate that I might use.
How is the typing experience on polycarb vs aluminum?
Curious about this as well. I have a brass hhkb plate that I might use.
Ditto!
Show Image(https://i.imgur.com/BiZCpar.jpg)Show Image(https://i.imgur.com/3VjqfVT.jpg)
Finished mine
Man, those pink pics look good. Makes me extra hype for mine.I will push for your tracking. Sorry for the delay
Any updates on tracking Raymond? Yet to recieve a number :(
Man, those pink pics look good. Makes me extra hype for mine.I will push for your tracking. Sorry for the delay
Any updates on tracking Raymond? Yet to recieve a number :(
Received my RJ. Incredible craftsmanship and attention to detail. This weekend I will solder everything and post it here.
Thanks Raymond.
Sent from my iPhone using Tapatalk
Hey Raymond,
When can I expect a shipping notification? Ordered from you directly not from originative.
Just got my board and installed the prepared PCB with switches and everything.
The anodization is just out of this world, never seen anything quite like it. Glad I chose the grey one, love the brighter tone and it matches so good with my GMK Hydro keyset.
I took some pictures with my phone, they are not the greatest quality, but I am posting them nonetheless.
(Attachment Link)
(Attachment Link)
(Attachment Link)
I used a brass backplate and Kailh Box Black switches.
Just got my board and installed the prepared PCB with switches and everything.
The anodization is just out of this world, never seen anything quite like it. Glad I chose the grey one, love the brighter tone and it matches so good with my GMK Hydro keyset.
I took some pictures with my phone, they are not the greatest quality, but I am posting them nonetheless.
(Attachment Link)
(Attachment Link)
(Attachment Link)
I used a brass backplate and Kailh Box Black switches.
Just got my board and installed the prepared PCB with switches and everything.
The anodization is just out of this world, never seen anything quite like it. Glad I chose the grey one, love the brighter tone and it matches so good with my GMK Hydro keyset.
I took some pictures with my phone, they are not the greatest quality, but I am posting them nonetheless.
(Attachment Link)
(Attachment Link)
(Attachment Link)
I used a brass backplate and Kailh Box Black switches.
Great! I was afraid people gonna hate the Gray ones. So reliefed to hear you love it!
Good pics from your phone and GMK Hydro looks really really nice!
I am loving the board pictures people, keep em coming :p
Also waiting to hear some feedback on the polycarb plate typing experience... Does it feel softer than other boards?
Just got my board and installed the prepared PCB with switches and everything.
The anodization is just out of this world, never seen anything quite like it. Glad I chose the grey one, love the brighter tone and it matches so good with my GMK Hydro keyset.
I took some pictures with my phone, they are not the greatest quality, but I am posting them nonetheless.
(Attachment Link)
(Attachment Link)
(Attachment Link)
I used a brass backplate and Kailh Box Black switches.
Just got my board and installed the prepared PCB with switches and everything.
The anodization is just out of this world, never seen anything quite like it. Glad I chose the grey one, love the brighter tone and it matches so good with my GMK Hydro keyset.
I took some pictures with my phone, they are not the greatest quality, but I am posting them nonetheless.
(Attachment Link)
(Attachment Link)
(Attachment Link)
I used a brass backplate and Kailh Box Black switches.
Great! I was afraid people gonna hate the Gray ones. So reliefed to hear you love it!
Good pics from your phone and GMK Hydro looks really really nice!
Just got my board and installed the prepared PCB with switches and everything.
The anodization is just out of this world, never seen anything quite like it. Glad I chose the grey one, love the brighter tone and it matches so good with my GMK Hydro keyset.
I took some pictures with my phone, they are not the greatest quality, but I am posting them nonetheless.
(Attachment Link)
(Attachment Link)
(Attachment Link)
I used a brass backplate and Kailh Box Black switches.
Great! I was afraid people gonna hate the Gray ones. So reliefed to hear you love it!
Good pics from your phone and GMK Hydro looks really really nice!
Thank you and everyone behind RevoTeam for realizing such an amazing custom board!
Constant communication, added things for free like the cable and stabs (I can't even find any residue of oxidation on mine), fast production and delivery, safe packaging and just a beautiful board with absolutely no defects.
I am loving the board pictures people, keep em coming :p
Also waiting to hear some feedback on the polycarb plate typing experience... Does it feel softer than other boards?
I used a polycarbonate plate in my viper v2. I honestly hated it because of how much the plate flexed. I used mx blacks for the build, it might feel better with tactiles
Show Image(https://i.imgur.com/BiZCpar.jpg)Show Image(https://i.imgur.com/3VjqfVT.jpg)
Finished mine
Dang... I should have ordered from Raymond
Dang... I should have ordered from Raymond
If it's any consolation, I ordered through Raymond and I'm yet to receive mine (even though AU is much closer to CN than the US...) ;D I'll just look at it positively and say it's letting me build more hype.
Show Image(https://i.imgur.com/BiZCpar.jpg)Show Image(https://i.imgur.com/3VjqfVT.jpg)
Finished mine
Hot damn!
Shall we start a thread "Post your Revo keyboards"?
Got my board, too. :thumb: Thanks, Raymond.Guess you'll need those pink switches now...
Wow. My kit just arrived and it is stunning! The presentation with the box was awesome, and the love and care Raymond has put into this project is apparent just from opening it. I don't think I have ever been this excited to build a keyboard before!
Any update on the Oco orders? ._.
Got my board, too. :thumb: Thanks, Raymond.Guess you'll need those pink switches now...
Quote
If it's any consolation, I ordered through Raymond and I'm yet to receive mine (even though AU is much closer to CN than the US...) ;D I'll just look at it positively and say it's letting me build more hype.
Well,Yours is in the warehouse and they left it there till today and i think they will ship it tomorrow and i will have tracking for you tomorrow.This is upsetting,but something like this could happen...Sorry...
Mine came today! Looks amazing, can't wait to start building it. Just having trouble deciding on which plate I should use. https://imgur.com/a/esfe2
Mine came today! Looks amazing, can't wait to start building it. Just having trouble deciding on which plate I should use. https://imgur.com/a/esfe2
Bootiiful! Even though I bought a brass plate for this build, that pcb looks amazeballs with the pc plate...
Mine came today! Looks amazing, can't wait to start building it. Just having trouble deciding on which plate I should use. https://imgur.com/a/esfe2
Bootiiful! Even though I bought a brass plate for this build, that pcb looks amazeballs with the pc plate...
I bought a brass plate as well. It'll be here Saturday. Is there a big difference in terms of feel? I'm really tempted to just use the silver plate with the nice ano on it. Plus if I wanted to swap to the brass I could just pair it with a zeal pcb and some different switches.
Where'd you guys get your plates from? Would love me some brass for this build.
Mine came today! Looks amazing, can't wait to start building it. Just having trouble deciding on which plate I should use. https://imgur.com/a/esfe2
Bootiiful! Even though I bought a brass plate for this build, that pcb looks amazeballs with the pc plate...
I bought a brass plate as well. It'll be here Saturday. Is there a big difference in terms of feel? I'm really tempted to just use the silver plate with the nice ano on it. Plus if I wanted to swap to the brass I could just pair it with a zeal pcb and some different switches.
A little curious if different plates will have any effect at all on how this particular kit feels. I think the difference will be very minute due to the tray mounting.
A little curious if different plates will have any effect at all on how this particular kit feels. I think the difference will be very minute due to the tray mounting.
You're probably right, but the difference in flex between alu and brass is substantial and enough to convince me that it'll make some difference in feel even with the tray mount. I'll probably build both and report in!
A little curious if different plates will have any effect at all on how this particular kit feels. I think the difference will be very minute due to the tray mounting.
You're probably right, but the difference in flex between alu and brass is substantial and enough to convince me that it'll make some difference in feel even with the tray mount. I'll probably build both and report in!
More flex with brass I'm guessing? This will be my first brass plate.
If you can't decide which plate to use. You should put switches and everything on it and try it out. Just don't need to solder it up. Use the one you love the most and solder it up.
Brass + Linears = LoveI have tried Brass+linear on my keycult no.1 and it's great. I have decide to use brass plate for my kit since.
Brass + Linears = LoveI have tried Brass+linear on my keycult no.1 and it's great. I have decide to use brass plate for my kit since.
Damn...Is Brass + Tactile just as cool?
Brass + Linears = LoveI have tried Brass+linear on my keycult no.1 and it's great. I have decide to use brass plate for my kit since.
Damn...Is Brass + Tactile just as cool?
For anyone who wants to do split backspace with the board: the included aluminium backplate lets the two keys stand a little higher than all the other keys on that row, making the keycap hit the side of the case while typing.
If you want to do split backspace I suggest getting another backplate. I don't know if the same applies to the plastic backplate.
Brass + Linears = LoveI have tried Brass+linear on my keycult no.1 and it's great. I have decide to use brass plate for my kit since.
Damn...Is Brass + Tactile just as cool?
I used brass with tactile (Mod-M with Zealios stem) for my TX-CP and it's as awesome as my TX-1800 and the TINA-C which are brass with linears. For the RJ I also used linears.
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
BRASS is life! ;D
Ah so that's the issue. I noticed this too and was sure mine were seated all the way in. I swapped to the polycarb plate and it was fine.For anyone who wants to do split backspace with the board: the included aluminium backplate lets the two keys stand a little higher than all the other keys on that row, making the keycap hit the side of the case while typing.
If you want to do split backspace I suggest getting another backplate. I don't know if the same applies to the plastic backplate.
are you positive you have them seated in the correct spot.
I imagine that a relatively small amount of Dremel work should correct that split backspace issue, yeah? I haven’t fully decided which plate to use yet, however. Thanks for posting that, though. Saves some of us from encountering that!
For anyone who wants to do split backspace with the board: the included aluminium backplate lets the two keys stand a little higher than all the other keys on that row, making the keycap hit the side of the case while typing.Does the PC plate have the same issue?
If you want to do split backspace I suggest getting another backplate. I don't know if the same applies to the plastic backplate.
For anyone who wants to do split backspace with the board: the included aluminium backplate lets the two keys stand a little higher than all the other keys on that row, making the keycap hit the side of the case while typing.Does the PC plate have the same issue?
If you want to do split backspace I suggest getting another backplate. I don't know if the same applies to the plastic backplate.
For anyone who wants to do split backspace with the board: the included aluminium backplate lets the two keys stand a little higher than all the other keys on that row, making the keycap hit the side of the case while typing.Does the PC plate have the same issue?
If you want to do split backspace I suggest getting another backplate. I don't know if the same applies to the plastic backplate.
I just finished a build with a Zeal 60, MX Silver switches, and GMK Ocean Dolch. I ran into the split backspace issue, but my caps don't quite hit the case so I might leave it. Those two switches sit slightly proud, but it's not too bad.
I just finished a build with a Zeal 60, MX Silver switches, and GMK Ocean Dolch. I ran into the split backspace issue, but my caps don't quite hit the case so I might leave it. Those two switches sit slightly proud, but it's not too bad.
Stunning build man!
Shouldn't have missed out on this, but was already in for multiple X60s xD
Is split backspace issue a thing on the Zeal 60? Or is it related to the plate?
I just finished a build with a Zeal 60, MX Silver switches, and GMK Ocean Dolch. I ran into the split backspace issue, but my caps don't quite hit the case so I might leave it. Those two switches sit slightly proud, but it's not too bad.
Stunning build man!
Shouldn't have missed out on this, but was already in for multiple X60s xD
Is split backspace issue a thing on the Zeal 60? Or is it related to the plate?
It seems to be the alu plate from my experience as well as two others.
I just finished a build with a Zeal 60, MX Silver switches, and GMK Ocean Dolch. I ran into the split backspace issue, but my caps don't quite hit the case so I might leave it. Those two switches sit slightly proud, but it's not too bad.
Stunning build man!
Shouldn't have missed out on this, but was already in for multiple X60s xD
Is split backspace issue a thing on the Zeal 60? Or is it related to the plate?
I have two Zeal 60 to be build next, so this had me a bit scared.
Glad it's not the pcb
PS, @FoC_Tow, sell me one of your X60's :)
I have two Zeal 60 to be build next, so this had me a bit scared.
Glad it's not the pcb
Make sure you read about the pads that have to be bridged on the Zeal PCB. I didn't really pay attention to it until I came to build it. The docs are here: https://zealpc.net/blogs/news/programming-your-zeal60-rgb-pcb
I found it easy to solder the right jumper pads, but it was a surprise when I saw them on the PCB.
What do I use to program this? Also what are the default shortcuts used to change backlighting?I believe since it is a b.fake, you can use the winkeyless.kr keymapper. I'm on mobile right now so I can't get you a direct link. Sorry.
What do I use to program this? Also what are the default shortcuts used to change backlighting?I believe since it is a b.fake, you can use the winkeyless.kr keymapper. I'm on mobile right now so I can't get you a direct link. Sorry.
My problem is that I only use HHKB split backspace keyboards... can you switch easily from one keyboard with it to one that does not??? I am getting rid out of my regular kbs...
Sent from my iPhone using Tapatalk
Anyone know the keys to control the backlighting?
Anyone know the keys to control the backlighting?
Here are the B.face instructions, I’m going to assume it’s the same?
http://blog.winkeyless.kr/185
Shouldn't have ordered from Oco fml
Shouldn't have ordered from Oco fml
It gets here when it gets here. :shrug:
If I've waited this long, I can wait just a little more.
Anyone know the keys to control the backlighting?
Here are the B.face instructions, I’m going to assume it’s the same?
http://blog.winkeyless.kr/185
They're not as far as I can tell. It's already been remapped for HHKB layout so I'm not sure what the fn layer has been changed to. It's definitely not the same.
I just tried it on the Alu plate, and split backspace is a about 1mm higher than not split. The easy is to grind off that 1 mm on it. Or i can make some new plate when i get the money from paypal(could be very long).
Can anyone recommend somewhere to buy an aluminum plate from?
Can anyone recommend somewhere to buy an aluminum plate from?
1upkeyboards
https://sentraq.com has some aluminum plates, 1up only has carbon, brass, and SS at the moment.
I got my brass from 1up. Going to build with it when I get my Zeal60 in on Tuesday. Was half tempted to get the carbon fiber. The LEDs on the b.fake are way too dim :(
My kit arrived today, managed to **** up building in about 5 minutes - forgot the stabilisers needed to go on before the plate :)) Got it built though, still amazed by how solid it feels. Anyone have tips for getting rid / reducing spacebar rattle?
My kit arrived today, managed to **** up building in about 5 minutes - forgot the stabilisers needed to go on before the plate :)) Got it built though, still amazed by how solid it feels. Anyone have tips for getting rid / reducing spacebar rattle?
I usually use thick lube on the stabiliser stems to reduce rattle. For my Revo build I actually used Zeal's transparent stabilisers and the spacebar sounds amazing (with thick lube and GMK caps). I couldn't really see a difference between the ones Raymond shipped and Zeal's, but I've had good experiences with the Zeal ones in other builds so I used those this time.
Still waiting on Blue-Grey for O.co shipment?
Regret not getting it from Raymond...
:feelsbadman:
Any news on when the oco orders are going to ship? :)
Hi Everyone
Sorry about not being here all the time.I just super busy with my work. And i just start my holiday for Chinese National day. It's a 8 days holiday for everyone in China,so nobody working for shipping. And i will ship Oco's order around 9th Oct. when everyone get back to work.
Thanks for understanding.
And about the plate,i will re-make some alu plate for RJ buyers after this buy is finished cause that way i can get my money back. I just need to something to cover the shipping. I will figure out how much shipping fee for a plate. Could be just a couple of dollars. Will have more info when i get back to work.
Hi Everyone
Sorry about not being here all the time.I just super busy with my work. And i just start my holiday for Chinese National day. It's a 8 days holiday for everyone in China,so nobody working for shipping. And i will ship Oco's order around 9th Oct. when everyone get back to work.
Thanks for understanding.
And about the plate,i will re-make some alu plate for RJ buyers after this buy is finished cause that way i can get my money back. I just need to something to cover the shipping. I will figure out how much shipping fee for a plate. Could be just a couple of dollars. Will have more info when i get back to work.
Damn... :(
Tfw..tfw...tfw :(
Looks a bit better now. I noticed the keys were sunk in and realized the diffuser was installed. Took it out and voila. USB cable fits much better, too. :pyup. Take the diffuser out and u will be just fine. And great pics btw. I liked them.
is there any chance how to get this revo hhkb kit again? or any open GB?
bummer. I was looking for a HHKB layout case that's solid. any other option?
yeah I know about fjell pro and yeah, probably won't score one lol revo is a really nice HHKB layout case, but yeah, missed it, like many other great GB out there lolbummer. I was looking for a HHKB layout case that's solid. any other option?
Wait for fjell pro and probably not get it since it would be limited.
bummer. I was looking for a HHKB layout case that's solid. any other option?
bummer. I was looking for a HHKB layout case that's solid. any other option?
You could get a kbdfans Tina.
bummer. I was looking for a HHKB layout case that's solid. any other option?
You could get a kbdfans Tina.
LZ CLS-H coming after CLS-M
LZ said he would be doing several keyboards with the CLS design in different layouts. First was TKL, then 75%, and lastly 60%.bummer. I was looking for a HHKB layout case that's solid. any other option?
You could get a kbdfans Tina.
LZ CLS-H coming after CLS-M
That's the first I've heard of that board. Any guess on how soon "soon" really is?
Does shipping resume today/tomorrow?
I don't like Tina, not minimalis enough for my tastebummer. I was looking for a HHKB layout case that's solid. any other option?
You could get a kbdfans Tina.
LZ CLS-H coming after CLS-Mkorean made, 60%? thank you for info. now what do I have to do so I won't missed his IC/GB announcement? can I get notification somehow?
can I get notification somehow?
thought so lol. ok will do it the ol' fashion way then *starescan I get notification somehow?
No.
O.co delivery update?
O.co delivery update?
Just posted on KBDIST- "Due to the mid-Autumn moon festival, both these sets will be shipped on 10/20. They may take about 1-2 weeks to arrive, and we will make an announcement as soon as then!"
Hi !
By any good fortune, does someone would sell is slot? Or have any info about a new gb for this Revo RJ ?
Thanks !! :cool:
damn I really wish I ordered from Raymond now
I am back to work guys. The factory is not working though...They will ship the rest to me around 13th or 14th. So i will ship Oco order around 16th or something. Best case.
Worst case, i will ship it around 20th. I won't wait any longer than 20th.
Thanks
Thanks for the update Unforgivable!
Raymond is having issues getting on GH, so I’ll pass on the update I was told!
Raymond has shipped the Oco orders to Sherry, using his proxy.
Right now the rest of the updates should hopefully be coming from Sherry, as Raymond doesn’t have access to those invoices/shipping statuses.
Overall, they should hopefully be shipping out soon! I’d get your switches ready if I were you!
Edit: Changed a bit of the wording, for clarity.
Dang, y'all still don't have your kits? Feelsbad
Dang, y'all still don't have your kits? Feelsbad
The people who are actually going to send us our kits (originative co) don't even have them yet :(
[/quote
y'all = oco buyers
Re OCO orders: KBDSIST says they are shipped
http://www.kbdist.com/updates/ (http://www.kbdist.com/updates/)
Hype!
Hi Everyone
Sorry about not being here all the time.I just super busy with my work. And i just start my holiday for Chinese National day. It's a 8 days holiday for everyone in China,so nobody working for shipping. And i will ship Oco's order around 9th Oct. when everyone get back to work.
Thanks for understanding.
And about the plate,i will re-make some alu plate for RJ buyers after this buy is finished cause that way i can get my money back. I just need to something to cover the shipping. I will figure out how much shipping fee for a plate. Could be just a couple of dollars. Will have more info when i get back to work.
Just received a shipping notification, its happening! :cool:
Also still waiting. The last kbdist update said everything would ship last Thursday or Friday but it looks like no one has received a tracking number yet (except 1 person here).. Original ship date was in August so this is getting pretty annoying.
There has been a little talk in the comments on their update page that’s worth a read.
http://www.kbdist.com/updates/2017/10/31/november-week-1-update#comments-59f907c171c10b2fa482ca83= (http://www.kbdist.com/updates/2017/10/31/november-week-1-update#comments-59f907c171c10b2fa482ca83=)
There has been a little talk in the comments on their update page that’s worth a read.
http://www.kbdist.com/updates/2017/10/31/november-week-1-update#comments-59f907c171c10b2fa482ca83= (http://www.kbdist.com/updates/2017/10/31/november-week-1-update#comments-59f907c171c10b2fa482ca83=)
Is there a new update? I only see the one from the 31st :/
There has been a little talk in the comments on their update page that’s worth a read.
http://www.kbdist.com/updates/2017/10/31/november-week-1-update#comments-59f907c171c10b2fa482ca83= (http://www.kbdist.com/updates/2017/10/31/november-week-1-update#comments-59f907c171c10b2fa482ca83=)
Is there a new update? I only see the one from the 31st :/
There has been a little talk in the comments on their update page that’s worth a read.
http://www.kbdist.com/updates/2017/10/31/november-week-1-update#comments-59f907c171c10b2fa482ca83= (http://www.kbdist.com/updates/2017/10/31/november-week-1-update#comments-59f907c171c10b2fa482ca83=)
Is there a new update? I only see the one from the 31st :/
So if I’m understanding this correctly, Oco hasn’t even received all of the boards?
Just sit on your hands and be patient, we will get them.
Just sit on your hands and be patient, we will get them.
I hear you, and there isn’t much else to do. But it certainly doesn’t alleviate my frustration or irritation. I know GBs can take time, but if Oco really hasn’t received all the boards - i think we at least deserve to know why they haven’t shipped yet. Non Oco order were shipped and received two months ago, so it’s very questionable what’s going on.
I guess just some transparency would be nice and put some of us at ease.
But yeah, wait we shall.
Just sit on your hands and be patient, we will get them.
I hear you, and there isn’t much else to do. But it certainly doesn’t alleviate my frustration or irritation. I know GBs can take time, but if Oco really hasn’t received all the boards - i think we at least deserve to know why they haven’t shipped yet. Non Oco order were shipped and received two months ago, so it’s very questionable what’s going on.
I guess just some transparency would be nice and put some of us at ease.
But yeah, wait we shall.
All of this waiting just to save 20 bucks.... RIP
Hi Revo Team, According to the updates on kbdist it looks like Oco still hasn't received 2/3 of their orders yet... Any news on when the rest will ship? Thanks in advance.
[edit for spelling]
Hi Revo Team, According to the updates on kbdist it looks like Oco still hasn't received 2/3 of their orders yet... Any news on when the rest will ship? Thanks in advance.
[edit for spelling]
Unless I’m missing something, all of it shipped. It’s just not all delivered yet.
Sent from my iPhone using Tapatalk
Hi Revo Team, According to the updates on kbdist it looks like Oco still hasn't received 2/3 of their orders yet... Any news on when the rest will ship? Thanks in advance.
[edit for spelling]
Unless I’m missing something, all of it shipped. It’s just not all delivered yet.
Sent from my iPhone using Tapatalk
this is correct
freight forwarder seems to have run into an issue in customs
happens
Hi Revo Team, According to the updates on kbdist it looks like Oco still hasn't received 2/3 of their orders yet... Any news on when the rest will ship? Thanks in advance.
[edit for spelling]
Unless I’m missing something, all of it shipped. It’s just not all delivered yet.
Sent from my iPhone using Tapatalk
this is correct
freight forwarder seems to have run into an issue in customs
happens
Hi Revo Team, According to the updates on kbdist it looks like Oco still hasn't received 2/3 of their orders yet... Any news on when the rest will ship? Thanks in advance.
[edit for spelling]
Unless I’m missing something, all of it shipped. It’s just not all delivered yet.
Sent from my iPhone using Tapatalk
this is correct
freight forwarder seems to have run into an issue in customs
happens
Thanks for the update, Puddsy. Kind of sad we had to hear it from you, though, and not Oco or Revo.
That's it, I'm never buying from Originative again. After months of waiting past Raymond's ship date my RJ finally ships and was supposed to be here today. I get home and theres a UPS sticker saying I needed a signature, which I have never needed for anything else I've bought from Originative and was not made aware of in any way. So now to wait even more for this keyboard that I could have had months ago if I didn't think that Originative could do their damn job. On top of that today was the only day I have off work this week, god I'm upset.
*triggered*
That's it, I'm never buying from Originative again. After months of waiting past Raymond's ship date my RJ finally ships and was supposed to be here today. I get home and theres a UPS sticker saying I needed a signature, which I have never needed for anything else I've bought from Originative and was not made aware of in any way. So now to wait even more for this keyboard that I could have had months ago if I didn't think that Originative could do their damn job. On top of that today was the only day I have off work this week, god I'm upset.
*triggered*
That's it, I'm never buying from Originative again. After months of waiting past Raymond's ship date my RJ finally ships and was supposed to be here today. I get home and theres a UPS sticker saying I needed a signature, which I have never needed for anything else I've bought from Originative and was not made aware of in any way. So now to wait even more for this keyboard that I could have had months ago if I didn't think that Originative could do their damn job. On top of that today was the only day I have off work this week, god I'm upset.
*triggered*
Don't you just have to pick it up now at your local UPS location?
Got my RJ today. Unfortunately I won't have time to build this for quite awhile but it looks great next to the Revo calc pad. Quick question: has anyone else had issues screwing down the top piece without the acrylic layer? The threading doesn't seem deep enough to tighten the top piece down all the way. Should I use a shim?
Got my RJ today. Unfortunately I won't have time to build this for quite awhile but it looks great next to the Revo calc pad. Quick question: has anyone else had issues screwing down the top piece without the acrylic layer? The threading doesn't seem deep enough to tighten the top piece down all the way. Should I use a shim?
I ended up using the smaller screws, the black ones
Wellp
Wellp
Has anyone who ordered from Originative.co received their Revo, yet? Haven't received an update from them on when the rest of the orders will go out. Worried that it might get shipped while I'm away (most of December).
Has anyone who ordered from Originative.co received their Revo, yet? Haven't received an update from them on when the rest of the orders will go out. Worried that it might get shipped while I'm away (most of December).
Anyone managed to get an update from Originative for the rest of the Revo cases? Still haven't received anything (tracking info, update, the case) from them.
A little dremel, a little solder, a few hours, and :) :) :) :) :) :)Show Image(https://i.imgur.com/tXxoTec.jpg)Show Image(https://i.imgur.com/Kn0aw1i.jpg)Show Image(https://i.imgur.com/4eshVSB.jpg)
Guessing the plate.
News
Hi All,
Someone asked me what I did to mod the alu plate so that you could do split backspace and I figured i'd post it publicly for anyone interested. See below.
Show Image(https://i.imgur.com/K8tmcf7.jpg)
Here is what the plate originally looks like. It's a little grainy cause enlarged, but there are 4 "nubs" that cause the 2 switches to sit about 1-2mm above the rest of the row. You just need to grind these off.Show Image(https://i.imgur.com/5sTZ3XA.jpg)
Here is what the plate looked like after I ground the 4 nubs off. You can be pretty flexible about it, as the PCB will be holding the switches in place even if you grind off a little too much. My advice is to insert some switches in to the plate of the same row, then add your split BS switches after grinding a little, seeing if it lines up, take em out, grind a little more, stick em back in, see if it lines up, and so on until it looks right.
Hope this helps!
Hi All,
Someone asked me what I did to mod the alu plate so that you could do split backspace and I figured i'd post it publicly for anyone interested. See below.
Show Image(https://i.imgur.com/K8tmcf7.jpg)
Here is what the plate originally looks like. It's a little grainy cause enlarged, but there are 4 "nubs" that cause the 2 switches to sit about 1-2mm above the rest of the row. You just need to grind these off.Show Image(https://i.imgur.com/5sTZ3XA.jpg)
Here is what the plate looked like after I ground the 4 nubs off. You can be pretty flexible about it, as the PCB will be holding the switches in place even if you grind off a little too much. My advice is to insert some switches in to the plate of the same row, then add your split BS switches after grinding a little, seeing if it lines up, take em out, grind a little more, stick em back in, see if it lines up, and so on until it looks right.
Hope this helps!
:feelsbadman: still no oco shipping notification
:feelsbadman: still no oco shipping notification
Has anyone received their SS plates from the separate group buy that gnmar2723 is running? I've had my R.J for while now and I'm looking to build it over the holidays.
Thank you, Revo, for the beautiful board.
Has anyone been able to contact Oco regarding their order(s)? They are unresponsive to email and paypal messages. I'm clueless about the status of my Revo HHKB's and the updates on kbdist are not that helpful.. (see below) At this point I know that they might have received the remaining orders (maybe?..) and that they will maybe ship after Thanksgiving (so sometime in the future... great).
October - Week 4 Update - REVO HHKB kits should be shipped now.
November - Week 1 Update - Revo has arrived! We will ship these out as soon as tomorrow or Friday. We still have to undergo some slight quality check. **they fail to mention that they only received 1/3 of their orders**
November 2017 - Thanksgiving Week! - The remaining REVO shipments has been sent to us. They are en route and should be here post Thanksgiving.
I finally got a response from them earlier today, and said that 2/3 of the revos have already been shipped out. 1/3 is still in transit to them, as it was the shipping scheme used by their agent/supplier.
Has anyone been able to contact Oco regarding their order(s)? They are unresponsive to email and paypal messages. I'm clueless about the status of my Revo HHKB's and the updates on kbdist are not that helpful.. (see below) At this point I know that they might have received the remaining orders (maybe?..) and that they will maybe ship after Thanksgiving (so sometime in the future... great).
October - Week 4 Update - REVO HHKB kits should be shipped now.
November - Week 1 Update - Revo has arrived! We will ship these out as soon as tomorrow or Friday. We still have to undergo some slight quality check. **they fail to mention that they only received 1/3 of their orders**
November 2017 - Thanksgiving Week! - The remaining REVO shipments has been sent to us. They are en route and should be here post Thanksgiving.
I finally got a response from them earlier today, and said that 2/3 of the revos have already been shipped out. 1/3 is still in transit to them, as it was the shipping scheme used by their agent/supplier.
(Attachment Link)
(Attachment Link)
(Attachment Link)
I have some major issues. These are all on the bottom side of the case but still :eek:.........Really disappointing to see this many defects, especially when it seems my kbd fans 5 degree case had better quality control.
I have some major issues. These are all on the bottom side of the case but still :eek:.........Really disappointing to see this many defects, especially when it seems my kbd fans 5 degree case had better quality control.
That sucks, man. At least they are on the bottom?
In these cases, do the group buy organizes replace the item, or are the buyers supposed to just suck it up and still be grateful for paying $400 and waiting months for a scratched up product?
Still hoping to see this in 2017 too... Shame it took a little while, but I've been plenty distracted with school this fall haha.
As for people in the SS Plate mini group buy: You should have received an update email from him -- all plates have been shipped! Let me or him know if you have any questions!
Here is the right corner (blocker area) blemish on mine. I know to some it might not be a big deal, but I see it every time I look at/use the board. :(
I sent an email to Oco a few days back, asking about how the scratches being reported by some customers will be handled. They said they're trying to get in touch with the supplier on how it could be handled, but right now, they don't have any extras they could use for replacements. You might want to check or follow up with them via email if the set you got really has problematic blemishes.
For those still waiting to get their sets, I suggest if you see unacceptable marks/scratches/dents on the kits you receive, don't proceed with the build. Take photos, and immediately send it to them via email. That way, it will help build a case to be raised to the supplier.
I sent an email to Oco a few days back, asking about how the scratches being reported by some customers will be handled. They said they're trying to get in touch with the supplier on how it could be handled, but right now, they don't have any extras they could use for replacements. You might want to check or follow up with them via email if the set you got really has problematic blemishes.
For those still waiting to get their sets, I suggest if you see unacceptable marks/scratches/dents on the kits you receive, don't proceed with the build. Take photos, and immediately send it to them via email. That way, it will help build a case to be raised to the supplier.
O. Co told me the same. I'm waiting on another response from Raymond.
I would have thought just by the fact he put his initials on the product that there would be no chance he would send out damaged boards.
I haven’t received my board yet, but I am already worried.
I would have thought just by the fact he put his initials on the product that there would be no chance he would send out damaged boards.
I haven’t received my board yet, but I am already worried.
Geez... wtf is Oco doing? ._.
I would have thought just by the fact he put his initials on the product that there would be no chance he would send out damaged boards.
I haven’t received my board yet, but I am already worried.
Geez... wtf is Oco doing? ._.
I’m quite sure Originative would send them out if they had them in hand.
Still waiting on mine too, hopefully there are no marks....
At this point, even I am starting to get a bit anxious at the lack of communication from oco and raymond.
Originative update:
Originative update:
SoonTM
Finished my RJ build over Christmas :cool:
Finished my RJ build over Christmas :cool:
Sweet build! Holy Pandas?
Revo, is there any ETA for the Oco orders to ship out?Next week...I will post here when i ship out Oco orders
I am shipping all the orders paid to me first and then orders from oco. But right now,typhoon in Shenzhen and nothing can be shipped out for a couple of days.
btw,this is the black you guys asking for..
Sorry for the MIA...i have shipped all GH's order... I will have tracking numbers in a few hours. Will fill them on Paypal...
Oco's order will be shipped ASAP after i check everything is in the box...
Sorry for the MIA...i have shipped all GH's order... I will have tracking numbers in a few hours. Will fill them on Paypal...
Oco's order will be shipped ASAP after i check everything is in the box...
Seriously I'm confused. Are we still in production stage or is someone swimming to the US with the Oco orders?
Raymond finally replied to my PM. I guess I should have posted here earlier. Long story short the rest of the Oco boards are basically lost in transit. If you haven't received your order yet you're ****ed. I'm asking him about refunds now..
Raymond finally replied to my PM. I guess I should have posted here earlier. Long story short the rest of the Oco boards are basically lost in transit. If you haven't received your order yet you're ****ed. I'm asking him about refunds now..
Ouch. Hope this isn't true. If it is, I hope it was insured for full value, if not, this is going to be costly.
Raymond finally replied to my PM. I guess I should have posted here earlier. Long story short the rest of the Oco boards are basically lost in transit. If you haven't received your order yet you're ****ed. I'm asking him about refunds now..
Ouch. Hope this isn't true. If it is, I hope it was insured for full value, if not, this is going to be costly.
https://imgur.com/a/03B4C (https://imgur.com/a/03B4C)
Yeah.. I've lost confidence in this GB and I'm guessing he won't do refunds. I'll report back if/when he responds to me. Enjoy my money Raymond, be wiser with it than I was.
Is this considered abnormal for a GB? I don’t think I could trust Revo to fix my board (and others) when some people haven’t even received theirs yet...
Still no official update from Raymond or Oco on this?
I didn’t know about this till I got the email from Oco this morning. Wendy confirmed that the RevoTeam lost the third batch (through the proxy). They are manufacturing the third batch again and they’re trying hard to get it shipped out this month.
I was thinking of backing out, but they’re already in a bad spot and I don’t want to contribute to making it worse. I’m waiting this out.
is it possible to put this together without the diffuser in the middle? i really don't want to have it in place, and I don't do LEDs in my builds.
what do i use to program this? my pcb's 2 upper right keys don't work out of the box (tilde and pipe).
Anyone else have weird spacing issues with the diffuser? if i rest the USB port on top of the diffuser, then the plate rests crooked in the case; if i fit it in to the slot on the diffuser, then the port is too low for a usb cable to fit through the hole. below is an example of the former. as you can see, if i slotted it in, the port would sit below the opening in the case, preventing a usb from fitting in.Show Image(https://i.imgur.com/7OHmiST.jpg[img])https://i.imgur.com/mbJmmv1.jpg[/img]
Anyone else have weird spacing issues with the diffuser? When I add the diffuser the top of the case sits super high and the USB cable cannot fit through the hole.
After this fiasco, I doubt Revo will be able to run another gbAnyone else have weird spacing issues with the diffuser? When I add the diffuser the top of the case sits super high and the USB cable cannot fit through the hole.
I have the same problem. I gave up on this ****ty kit and threw away the diffuser, the PCB (3 keys don't work, even before soldering), and the plate that couldn't be centered in the board. F**K THIS S**T. i'm just using the case with one broken screw stuck in one corner, with a plateless GH60 pcb.
STAY AWAY FROM REVO LIKE THE PLAGUE.
Anyone know what the washers int he kit are for?
I still never got mine but all these comments make me feel like if I ever get mine from oco/revo that it will be bad :(you should contact oco, I got refunded on mine. If you no longer want yours, at least that is an option
I still never got mine but all these comments make me feel like if I ever get mine from oco/revo that it will be bad :(
Any update on the remakes etc?
Just built mine..
https://imgur.com/gallery/iMqRL
Just built mine..
https://imgur.com/gallery/iMqRL
That looks hawttt. How do you like it?
Sounds great Kafka!
Just built mine..
https://imgur.com/gallery/iMqRL
That looks hawttt. How do you like it?
Just built mine..
https://imgur.com/gallery/iMqRL
Just built mine..
https://imgur.com/gallery/iMqRL
That looks hawttt. How do you like it?Just built mine..
https://imgur.com/gallery/iMqRL
Were these part of the remakes? I got mine about 3 months ago from o.co. It was a bit damaged and Raymond said he would take care of me but I have not heard anything from him since I got it.
Great build Kafka! I have some Zealio 67g waiting on a build with that poly plate.
Currently have Lubed Tealios on a brass plate. Feels so good. Best linear I have used. IMO
Just built mine..
https://imgur.com/gallery/iMqRL
That looks hawttt. How do you like it?Just built mine..
https://imgur.com/gallery/iMqRL
Were these part of the remakes? I got mine about 3 months ago from o.co. It was a bit damaged and Raymond said he would take care of me but I have not heard anything from him since I got it.
Great build Kafka! I have some Zealio 67g waiting on a build with that poly plate.
Currently have Lubed Tealios on a brass plate. Feels so good. Best linear I have used. IMO
So my son was messing with my RJ and turned the LED under glow on... I have never used this. Paid someone to build my board. Any idea how to turn them off?
Thanks
EDIT: fn+R fixed it
Did the replacement boards ever go out for this? I forget.
Just my yearly check-in to see if Raymond is still around to replace my top case. He stopped replying to my emailsover a yeartwo years ago.
Just my yearly check-in to see if Raymond is still around to replace my top case. He stopped replying to my emailsover a yeartwo years ago.