Author Topic: [GB] GMK Screw-in Stabilisers Group Buy (Read 8586 times)

Mechboards · « **on:** Thu, 05 April 2018, 05:25:41 »

Hello all!

We're running a GB for GMK Screw-in Stabilisers (to also restock the store)

£11.99 + postage = 1 Spacebar of your chosen size + 7 x 2u stabilisers. 60% Set for £3 less.

They will also come with washers to stop shorting!

Should ship end May as GMK are pretty quick at shipping stock. - Shipping worldwide

(Note, 7u wires are delayed until start of June.)

GB LINK

Thanks!

David

Signature · « **Reply #1 on:** Thu, 05 April 2018, 12:33:39 »

Approved

pr0ximity · « **Reply #2 on:** Thu, 05 April 2018, 12:40:32 »

Do you have a pic of the washers by chance? Curious what they look like, does GMK provide them or are you sourcing them seperately?

oluigenuma · « **Reply #3 on:** Thu, 05 April 2018, 13:00:36 »

Joined. Thank you!

Mechboards · « **Reply #4 on:** Thu, 05 April 2018, 14:44:00 »

Quote from: pr0ximity on Thu, 05 April 2018, 12:40:32

Do you have a pic of the washers by chance? Curious what they look like, does GMK provide them or are you sourcing them seperately?

We pack these with them - https://uk.rs-online.com/web/p/sealing-washers/0528154/?searchTerm=M2+Plain+Nylon+Sealing+Washer%2C+0.8mm+Thickness

pr0ximity · « **Reply #5 on:** Thu, 05 April 2018, 17:31:34 »

Quote from: Mechboards on Thu, 05 April 2018, 14:44:00

Quote from: pr0ximity on Thu, 05 April 2018, 12:40:32
Do you have a pic of the washers by chance? Curious what they look like, does GMK provide them or are you sourcing them seperately?

We pack these with them - https://uk.rs-online.com/web/p/sealing-washers/0528154/?searchTerm=M2+Plain+Nylon+Sealing+Washer%2C+0.8mm+Thickness

Good to know, thanks!

fcoury · « **Reply #6 on:** Fri, 06 April 2018, 16:03:52 »

Do you have a rough estimate of how much it would be to ship let's say 10 6.26u TKL kits to Brazil? I might have people here interested.

Mechboards · « **Reply #7 on:** Sun, 08 April 2018, 14:05:12 »

Quote from: fcoury on Fri, 06 April 2018, 16:03:52

Do you have a rough estimate of how much it would be to ship let's say 10 6.26u TKL kits to Brazil? I might have people here interested.

Hey email us and I'll get back to you

info@mechboards.co.uk

Cheers

Mechboards · « **Reply #8 on:** Wed, 11 April 2018, 05:01:58 »

30 Sets purchased

Dreamre · « **Reply #9 on:** Wed, 11 April 2018, 22:58:53 »

Are you able to lower the declared value of the items when shipping to Canada?

Mechboards · « **Reply #10 on:** Thu, 12 April 2018, 08:13:41 »

Quote from: Dreamre on Wed, 11 April 2018, 22:58:53

Are you able to lower the declared value of the items when shipping to Canada?

Yea, we can do that

phorx · « **Reply #11 on:** Thu, 12 April 2018, 08:41:56 »

I'm not very familiar with GMK Stabs... How do they compare with others like genuine cherrys or Zeals?

enrique.aliaga · « **Reply #12 on:** Thu, 12 April 2018, 08:59:21 »

I just ordered a set!

I'm curious, though... Would I be able to replace the stock Pok3r stabilizers with these? I think the Pok3r (non-backlit) uses plate-mount Cherry-style stabilizers. What do I need to get in order to replace them?

If the stabs in this GB do not serve my purpose, it's no problem. It'll be good to have them for future projects.

Chimera · « **Reply #13 on:** Thu, 12 April 2018, 09:00:36 »

What shipping method should we pick if we are in the US? Any idea how much additional shipping would be for that?

Anakey · « **Reply #14 on:** Thu, 12 April 2018, 09:02:34 »

Quote from: enrique.aliaga on Thu, 12 April 2018, 08:59:21

I just ordered a set!

I'm curious, though... Would I be able to replace the stock Pok3r stabilizers with these? I think the Pok3r (non-backlit) uses plate-mount Cherry-style stabilizers. What do I need to get in order to replace them?

If the stabs in this GB do not serve my purpose, it's no problem. It'll be good to have them for future projects.

These stabs are PCB mount so they can only be used in PCBs that support them. So you would only be able to replace plate mount stabs with other plate mount stabs on your Pok3r

xondat · « **Reply #15 on:** Thu, 12 April 2018, 09:05:34 »

Quote from: phorx on Thu, 12 April 2018, 08:41:56

I'm not very familiar with GMK Stabs... How do they compare with others like genuine cherrys or Zeals?

These are Cherry, just that GMK sells them so it's easier to call them GMK since the source is verified as being good.

Chimera · « **Reply #16 on:** Thu, 12 April 2018, 09:10:27 »

Quote from: Anakey on Thu, 12 April 2018, 09:02:34

Quote from: enrique.aliaga on Thu, 12 April 2018, 08:59:21
I just ordered a set!

I'm curious, though... Would I be able to replace the stock Pok3r stabilizers with these? I think the Pok3r (non-backlit) uses plate-mount Cherry-style stabilizers. What do I need to get in order to replace them?

If the stabs in this GB do not serve my purpose, it's no problem. It'll be good to have them for future projects.

These stabs are PCB mount so they can only be used in PCBs that support them. So you would only be able to replace plate mount stabs with other plate mount stabs on your Pok3r

Glad you posted this, my next build is plate mount and i almost ordered without knowing.

sorijealut · « **Reply #17 on:** Thu, 12 April 2018, 09:34:35 »

I'm having trouble checking out with paypal atm, probably a temporary thing.
Will try again.

KaosJ · « **Reply #18 on:** Thu, 12 April 2018, 09:40:32 »

Joining in the weekend

Best stabs so far.

Mechboards · « **Reply #19 on:** Thu, 12 April 2018, 10:03:57 »

Quote from: sorijealut on Thu, 12 April 2018, 09:34:35

I'm having trouble checking out with paypal atm, probably a temporary thing.
Will try again.

PM me if you're still having issues.

Quote from: phorx on Thu, 12 April 2018, 08:41:56

I'm not very familiar with GMK Stabs... How do they compare with others like genuine cherrys or Zeals?

They are seen as the best option

Quote from: Chimera on Thu, 12 April 2018, 09:00:36

What shipping method should we pick if we are in the US? Any idea how much additional shipping would be for that?

They are £2.50 for US/CA shipping.

sorijealut · « **Reply #20 on:** Thu, 12 April 2018, 10:33:49 »

Quote

PM me if you're still having issues.

Just got it to go through (in the US). Thank you!

buzzking00 · « **Reply #21 on:** Thu, 12 April 2018, 20:48:27 »

In for my next build!

phorx · « **Reply #22 on:** Sun, 15 April 2018, 12:44:03 »

In for a couple sets. Pricing and shipping both seem very respectable.

Lansky · « **Reply #23 on:** Tue, 17 April 2018, 05:24:21 »

Also in for a couple of these!

blighty · « **Reply #24 on:** Tue, 12 June 2018, 15:39:04 »

Is there an update on the 7u wire orders?

Lansky · « **Reply #25 on:** Wed, 13 June 2018, 02:39:02 »

Quote from: blighty on Tue, 12 June 2018, 15:39:04

Is there an update on the 7u wire orders?

I contacted Mechboards two days ago and got the following reply:

Quote

We're just waiting on GMK to ship them out to us. They said they're
under a heavy work load at the moment which is causing a delay. Their
current estimate is mid June, which should be soon. Hopefully we can
have them within the next 7-10 days.

xondat · « **Reply #26 on:** Wed, 13 June 2018, 07:16:33 »

Quote from: Lansky on Wed, 13 June 2018, 02:39:02

Quote from: blighty on Tue, 12 June 2018, 15:39:04
Is there an update on the 7u wire orders?

I contacted Mechboards two days ago and got the following reply:

Quote
We're just waiting on GMK to ship them out to us. They said they're
under a heavy work load at the moment which is causing a delay. Their
current estimate is mid June, which should be soon. Hopefully we can
have them within the next 7-10 days.

Also want to make sure this is seen:

https://mechboards.co.uk/were-moving/

Quote

Mechboards is moving office this month. Any orders made before the 12th of June will be packed and sent. Any orders after that will be delayed until we’re settled in, which may be 1-2 weeks. Thanks!

Probably won't overlap though.

romevi · « **Reply #27 on:** Wed, 13 June 2018, 14:28:57 »

Sweet; going to join.

theillumedpanda · « **Reply #28 on:** Wed, 13 June 2018, 15:14:28 »

Are you going to sell those screw-in stabs after the GB has been fulfilled?

Mechboards · « **Reply #29 on:** Wed, 20 June 2018, 06:22:55 »

Hey all - sorry for the delay!
GMK are only just getting round to sending us our order. So once it's received we'll go through all orders ASAP and get them out to you all!
Cheers for being patient.

News:

Author Topic: [GB] GMK Screw-in Stabilisers Group Buy (Read 8586 times)