geekhack

geekhack Marketplace => Vendor Forums => MechanicalKeyboards.com => Topic started by: 00zeRO on Fri, 04 November 2016, 09:59:16

Title: Stainless Steel Phantom TKL Frame (w/Standoffs) - Updated with Reference Pics
Post by: 00zeRO on Fri, 04 November 2016, 09:59:16

Hiya folks!

We are taking a serious look at carrying Stainless Steel Phantom TKL Frames (w/Standoffs) and we need your help. Please see following photos for reference (phots provided by DT community):

ANSI 125
(https://deskthority.net/w/images/thumb/2/2c/PHANSI125.jpg/600px-PHANSI125.jpg)

ANSI 150
(https://deskthority.net/w/images/thumb/f/f1/PHANSI150.jpg/600px-PHANSI150.jpg)

ISO 125
(https://deskthority.net/w/images/thumb/1/19/PHISO125.jpg/600px-PHISO125.jpg)

ISO 150
(https://deskthority.net/w/images/thumb/6/61/PHISO150.jpg/600px-PHISO150.jpg)

7BIT
(https://deskthority.net/w/images/thumb/a/aa/PH7BIT.jpg/600px-PH7BIT.jpg)

Finished frames are not going to look like the plates above with regard to overall design (most/all holes between F Row and Number Row will be omitted), but overall layout will be maintained.

Please vote for the one you'd like to see produced.

Thanks for stopping by!

- MK Team

Title: Re: Stainless Steel Phantom TKL Frame (w/Standoffs) - Updated with Reference Pics
Post by: 00zeRO on Fri, 04 November 2016, 10:53:46

Update: added reference pics so that you know what you are voting for... :thumb:

Title: Re: Stainless Steel Phantom TKL Frame (w/Standoffs) - Updated with Reference Pics
Post by: 00zeRO on Sat, 05 November 2016, 07:31:23

Bump

Title: Re: Stainless Steel Phantom TKL Frame (w/Standoffs) - Updated with Reference Pics
Post by: 00zeRO on Tue, 13 December 2016, 13:38:22

ISO has no votes...