Author Topic: [IC] ORI 87 by ORI.CLUB // CUSTOM GASKET // PROTOTYPE V3 ARRIVED!! (Read 111296 times)

hottrout · « **Reply #50 on:** Sun, 03 May 2020, 04:17:57 »

ice clean design.

iamranger · « **Reply #51 on:** Sun, 03 May 2020, 22:11:56 »

Gorgeous design. The new logo is awesome.

BruceDinh · « **Reply #52 on:** Mon, 04 May 2020, 01:49:34 »

My technical adviser is currently analyzing this new logo. If processing, the cost is very high. But I will find a logical way.

Aevyn · « **Reply #53 on:** Mon, 04 May 2020, 02:22:56 »

Very cool logo!

Sent from my GM1915 using Tapatalk

Kalibrrr · « **Reply #54 on:** Mon, 04 May 2020, 03:16:09 »

Looking forward to this if it passes proto stage

Neostoic · « **Reply #55 on:** Mon, 04 May 2020, 04:06:16 »

Really looking forward to seeing the prototype for this, completely agree with an earlier comment.
The fins at the back of the top where the gaskets join are way to thin to not cause problems but otherwise looks neet and clean.
Can't wait to see more.
GL.

BruceDinh · « **Reply #56 on:** Mon, 04 May 2020, 12:28:40 »

After discussing my technical advisors, the only feasible way to make the logo is using wire edm. The accuracy would be high (after anoding, it may not fit because anode makes the surface about 25 micron thicker)
In order to guarantee the accuracy, I booked 2 more top parts with new logo for the prototype.
Rip my wallet

Aevyn · « **Reply #57 on:** Mon, 04 May 2020, 12:38:06 »

Quote from: BruceDinh on Mon, 04 May 2020, 12:28:40

After discussing my technical advisors, the only feasible way to make the logo is using wire edm. The accuracy would be high (after anoding, it may not fit because anode makes the surface about 25 micron thicker)
In order to guarantee the accuracy, I booked 2 more top parts with new logo for the prototype.
Rip my wallet

CNC the red sun. Make the place where it fits into about 0.10 mm larger and it should still fit after ano and you'll barely notice the gap.

Zeelobby · « **Reply #58 on:** Mon, 04 May 2020, 19:31:12 »

Quote from: BruceDinh on Mon, 04 May 2020, 12:28:40

After discussing my technical advisors, the only feasible way to make the logo is using wire edm. The accuracy would be high (after anoding, it may not fit because anode makes the surface about 25 micron thicker)
In order to guarantee the accuracy, I booked 2 more top parts with new logo for the prototype.
Rip my wallet

Dang. Excited to see.

cemoon · « **Reply #59 on:** Mon, 04 May 2020, 20:52:26 »

sexy af.
Bác mà chạy là anh em VKG ủng hộ hết mình

)

BruceDinh · « **Reply #60 on:** Mon, 04 May 2020, 21:00:40 »

Quote from: Zeelobby on Mon, 04 May 2020, 19:31:12

Quote from: BruceDinh on Mon, 04 May 2020, 12:28:40
After discussing my technical advisors, the only feasible way to make the logo is using wire edm. The accuracy would be high (after anoding, it may not fit because anode makes the surface about 25 micron thicker)
In order to guarantee the accuracy, I booked 2 more top parts with new logo for the prototype.
Rip my wallet
Dang. Excited to see.

Love you

Quote from: Aevyn on Mon, 04 May 2020, 12:38:06

Quote from: BruceDinh on Mon, 04 May 2020, 12:28:40
After discussing my technical advisors, the only feasible way to make the logo is using wire edm. The accuracy would be high (after anoding, it may not fit because anode makes the surface about 25 micron thicker)
In order to guarantee the accuracy, I booked 2 more top parts with new logo for the prototype.
Rip my wallet

CNC the red sun. Make the place where it fits into about 0.10 mm larger and it should still fit after ano and you'll barely notice the gap.

Edges cross between the bird and the sun is very sharp, so we can't using cnc tools for cut that part.

Quote from: cemoon on Mon, 04 May 2020, 20:52:26

sexy af.
Bác mà chạy là anh em VKG ủng hộ hết mình )

Cám ơn bác

meIIow · « **Reply #61 on:** Tue, 05 May 2020, 12:29:29 »

Looks great, really hope I get a spot!

KRY2SOON · « **Reply #62 on:** Tue, 05 May 2020, 17:05:21 »

1. The renders look really clean!

2. I love the new logo of the origami crane or bird, reminds me of childhood!

Aevyn · « **Reply #63 on:** Wed, 06 May 2020, 13:08:02 »

Quote from: BruceDinh on Mon, 04 May 2020, 21:00:40

Edges cross between the bird and the sun is very sharp, so we can't using cnc tools for cut that part.

I hear you. Can't you fillet the inside edges like 0.1mm so a drill bit would be able to do that? Not sure how visible the effect would be, but at least it would allow you to cnc it.

sctang · « **Reply #64 on:** Thu, 07 May 2020, 00:27:11 »

Really like the design and both logos are cool in their own way!

SLPNick · « **Reply #65 on:** Thu, 07 May 2020, 00:51:07 »

That looks really clean and amazing, can't wait to see it!

Kelseer · « **Reply #66 on:** Thu, 07 May 2020, 01:10:14 »

Good luck and def interested. Me and my girlfriend finished both Ori games during the quarantine as well, with both of us finishing the 2nd game literally within seconds of each other - and rate it as one of the best game(s) we've played. Made me wonder how AAA games cannot capture the charm and simplicity of these games, yet with much more budget and resources.

BruceDinh · « **Reply #67 on:** Thu, 07 May 2020, 10:54:06 »

UPDATE CNC PROTOTYPE PHASE:

Finally the day for the CNC prototype prototype arrived, I went to the workshop to have a look and a few photos.
This is just the shaping phase and tomorrow will be the polished phase of the prototype. Hopefully the next week will be completely anode.

BruceDinh · « **Reply #68 on:** Thu, 07 May 2020, 11:05:47 »

Quote from: SLPNick on Thu, 07 May 2020, 00:51:07

That looks really clean and amazing, can't wait to see it!

thanks you sir

Quote from: Aevyn on Wed, 06 May 2020, 13:08:02

Quote from: BruceDinh on Mon, 04 May 2020, 21:00:40
Edges cross between the bird and the sun is very sharp, so we can't using cnc tools for cut that part.

I hear you. Can't you fillet the inside edges like 0.1mm so a drill bit would be able to do that? Not sure how visible the effect would be, but at least it would allow you to cnc it.

Wire EDM is very interesting way to cut material.
you can see this video:

Quote from: sctang on Thu, 07 May 2020, 00:27:11

Really like the design and both logos are cool in their own way!

Thanks you sir

Quote from: Kelseer on Thu, 07 May 2020, 01:10:14

Good luck and def interested. Me and my girlfriend finished both Ori games during the quarantine as well, with both of us finishing the 2nd game literally within seconds of each other - and rate it as one of the best game(s) we've played. Made me wonder how AAA games cannot capture the charm and simplicity of these games, yet with much more budget and resources.

The truth is, I will never forget the first cut sensce when Naru finds and nurtures Ori for the first time.

Thank you to everyone who took the time to make such games, it is very respectable.

snurrebassen · « **Reply #69 on:** Thu, 07 May 2020, 12:28:09 »

fff i keep coming back to this. Such a beauty of a case! I’d murder for it

Sent from my iPhone using Tapatalk

Zeelobby · « **Reply #70 on:** Thu, 07 May 2020, 23:35:01 »

It really is beautiful. Exciting to see protos

dkrikun00 · « **Reply #71 on:** Fri, 08 May 2020, 03:27:08 »

hottrout · « **Reply #72 on:** Fri, 08 May 2020, 03:50:24 »

Getting more interested. Looks to be well engineered.

BruceDinh · « **Reply #73 on:** Fri, 08 May 2020, 09:38:54 »

More image from CNC prototype phase, not finish yet. We still have a polish phase, but look pretty good.
My new Top part with new logo will cnc tomorrow.

Thanks for your time.

Slash Emperor · « **Reply #74 on:** Fri, 08 May 2020, 10:50:49 »

Proto looks to be coming along well, I'm looking forward to seeing how it turns out!

Zeelobby · « **Reply #75 on:** Fri, 08 May 2020, 19:05:09 »

Yeah. Looks awesome! Excited to see the top with icon.

roznalos · « **Reply #76 on:** Sat, 09 May 2020, 03:40:14 »

Wow looks great! Can't wait to see it polished

BruceDinh · « **Reply #77 on:** Sat, 09 May 2020, 06:09:19 »

Thank you for your time, have watched with me this project.
Now the IC form:

Every interest is every motivation for me to accomplish this project well. Please fill out the IC form if you are interested.

https://forms.gle/6qUkpEZSpK9U9yjm8

If you have any further ideas please don't hesitate to tell me.

dhung97 · « **Reply #78 on:** Sat, 09 May 2020, 07:00:20 »

Really interest with it! Just fulfilled the IC form. Good luck with the GB!

apexshikari · « **Reply #79 on:** Sat, 09 May 2020, 07:02:46 »

Quote from: BruceDinh on Fri, 08 May 2020, 09:38:54

More image from CNC prototype phase, not finish yet. We still have a polish phase, but look pretty good.
My new Top part with new logo will cnc tomorrow.

Thanks for your time.

Show Image

Show Image

Show Image

Proto looks real good. :thumb:

BruceDinh · « **Reply #80 on:** Sat, 09 May 2020, 12:08:04 »

UPDATE:
If you want to support this project, please use this code. VERY THANKING TO YOU.

Code: [Select]

[url=https://geekhack.org/index.php?topic=106031.0][img width=384 height=120]https://i.imgur.com/27I3ske.png[/img][/url]

//gainsborough · « **Reply #81 on:** Sat, 09 May 2020, 13:05:29 »

filled out the form! Really excited to see progress on this!

blufury1 · « **Reply #82 on:** Sat, 09 May 2020, 17:29:36 »

Filled out the IC form. Board is gorgeous and I really hope you continue forward with it!

aclassynerd · « **Reply #83 on:** Sat, 09 May 2020, 22:46:59 »

Interested to see that new logo on a proto! Looks great

richchen · « **Reply #84 on:** Sun, 10 May 2020, 00:32:31 »

I love this. Reserved.

I would love to have a discord to talk about this!

BruceDinh · « **Reply #85 on:** Mon, 11 May 2020, 06:14:37 »

Quote from: blufury1 on Sat, 09 May 2020, 17:29:36

Filled out the IC form. Board is gorgeous and I really hope you continue forward with it!

Thanks for your support

Quote from: //gainsborough on Sat, 09 May 2020, 13:05:29

filled out the form! Really excited to see progress on this!

Quote from: richchen on Sun, 10 May 2020, 00:32:31

Show Image

I love this. Reserved.

I would love to have a discord to talk about this!

I actually have a discord, but currently I rarely have time to chat / reply on the discord. But when Group Buy is available, there will certainly be sever Discord and Blog to be updated for everyone.

Quote from: aclassynerd on Sat, 09 May 2020, 22:46:59

Interested to see that new logo on a proto! Looks great

Anodizing a few more days are done, hope you will like it

BruceDinh · « **Reply #86 on:** Tue, 12 May 2020, 02:02:25 »

Just some qc image before i bring into anodizing phase, the top part with new logo will come later because im booking after few day this old design.

this side brass need improve more. [ xxx]

but this one pretty good. [ Pass]

Plate aluminium + brasss [ Pass]

Usb C [Pass]

Sycomore · « **Reply #87 on:** Tue, 12 May 2020, 02:29:26 »

Looking good so far!!

Neostoic · « **Reply #88 on:** Tue, 12 May 2020, 02:41:00 »

Quote from: Sycomore on Tue, 12 May 2020, 02:29:26

Looking good so far!!

Can't wait to see more as this develops!

noorejji · « **Reply #89 on:** Tue, 12 May 2020, 03:38:10 »

That is the most beautiful keyboard logo I've seen to date. GL

Onnimar · « **Reply #90 on:** Tue, 12 May 2020, 04:05:55 »

Looking good so far! How is the PCB prototyping going? Will you be putting one of the prototypes together? I'm interested in how the keyboard feels and sounds because aesthetic wise its on point.

I can't wait for more developments.

p.s. What is the height of the front end?

hottrout · « **Reply #91 on:** Tue, 12 May 2020, 07:32:02 »

Looking great, interest is building.

mvkoto · « **Reply #92 on:** Tue, 12 May 2020, 12:39:45 »

Love the design choices here. Interested!

cLRLYY · « **Reply #93 on:** Tue, 12 May 2020, 17:09:13 »

Love it overall. If this makes it for a decent price. I'm definitely in!

heartbreak · « **Reply #94 on:** Tue, 12 May 2020, 17:44:10 »

Wish it wasn’t limited to 10. Looks like we’re gonna have to fight for a spot

IzzyD · « **Reply #95 on:** Tue, 12 May 2020, 19:16:12 »

Love it. Can't wait to TRY to get into this GB.

//gainsborough · « **Reply #96 on:** Tue, 12 May 2020, 21:35:03 »

Quote from: heartbreak on Tue, 12 May 2020, 17:44:10

Wish it wasn’t limited to 10. Looks like we’re gonna have to fight for a spot

Bro, I already have a buffered OOS option with dolphin slash into fast fall short hop first hit of nair into up-tilt combo ready to go.

evorus5 · « **Reply #97 on:** Tue, 12 May 2020, 21:58:32 »

I am in on this one. Im going to try to be #10 lol
What is the price point?

Poesjuh · « **Reply #98 on:** Wed, 13 May 2020, 12:38:40 »

New logo looks really good! Two things that caught my mind on the proto;
- bottom row of the plate is cheese, would hope for more fixed plates for the lucky 10 buyers
- the USB port cutout is clean, I do wonder if it’s not too small for all the fancy custom cables we use

Sent from my iPhone using Tapatalk

joonia · « **Reply #99 on:** Wed, 13 May 2020, 19:31:22 »

this looks so good. hopefully I'd be able to get in on this

News:

Author Topic: [IC] ORI 87 by ORI.CLUB // CUSTOM GASKET // PROTOTYPE V3 ARRIVED!! (Read 111296 times)