Author Topic: [IC]GMK Dolch (Icon Mod+AddON) PLUS x-CMYW  (Read 15347 times)

0 Members and 1 Guest are viewing this topic.

Offline Unforgivable

  • Posts: 619
Re: [IC]GMK Dolch (Icon Mod+AddON) PLUS x-CMYW
« Reply #150 on: Fri, 20 January 2017, 20:20:56 »
why 1u numpad 0 is not crossed like the base kit?

I might have miss them, will update it again.  :-X

...
...
Is the big Uniqey 'Q' cap a promo one, complimentary from GMK?

The Uniqey 'Q' is a cap that I have included in all of my previous GB, except 9009 because it doesn't exists by then.

I think is kinda something unique and kind of good looking as a R1 keys, but some say it is ugly, to each of their own I guess.

I wouldn't complain about a free keycap. That's just me though!

Offline kekkon

  • Thread Starter
  • Posts: 383
  • Location: MALAYSIA
Re: [IC]GMK Dolch (Icon Mod+AddON) PLUS x-CMYW
« Reply #151 on: Fri, 20 January 2017, 22:36:08 »
I have draft a google form for this :-

goo.gl/7xUgmO

Please let me know if I have miss anything.

Offline Jumie

  • Posts: 298
  • Location: Dangerously Beautiful
Re: [IC]GMK Dolch (Icon Mod+AddON) PLUS x-CMYW
« Reply #152 on: Sat, 21 January 2017, 01:00:08 »
filled.. let's make it happen

Offline oatmicro

  • Posts: 346
Re: [IC]GMK Dolch (Icon Mod+AddON) PLUS x-CMYW
« Reply #153 on: Sat, 21 January 2017, 07:21:58 »
It's happening!
I will filled the form at the end of Feb to make sure that I will take every kits!

Online neon_tom

  • Posts: 169
Re: [IC]GMK Dolch (Icon Mod+AddON) PLUS x-CMYW
« Reply #154 on: Sat, 21 January 2017, 08:19:31 »
I have draft a google form for this :-

goo.gl/7xUgmO

Please let me know if I have miss anything.

Submitted!

Offline thanhnv244

  • Posts: 19
Re: [IC]GMK Dolch (Icon Mod+AddON) PLUS x-CMYW
« Reply #155 on: Sat, 21 January 2017, 10:49:36 »
Submitted

Offline gnmar2723

  • Posts: 321
  • Location: Minnesota
  • i just want it to stop
Re: [IC]GMK Dolch (Icon Mod+AddON) PLUS x-CMYW
« Reply #156 on: Sat, 21 January 2017, 10:57:04 »
This is awesome! Shouldn't we move this over to the GB thread since it's live though?
« Last Edit: Sat, 21 January 2017, 18:09:10 by gnmar2723 »
gnmar2723's projects

I generally concentrate on the stop light. When that **** turns green its mother****ing Nürburgring time.

Offline Jumie

  • Posts: 298
  • Location: Dangerously Beautiful
Re: [IC]GMK Dolch (Icon Mod+AddON) PLUS x-CMYW
« Reply #157 on: Sat, 21 January 2017, 11:57:07 »
not approved yet maybe?

Offline Giorgio

  • Posts: 1764
  • Location: Italy
Re: [IC]GMK Dolch (Icon Mod+AddON) PLUS x-CMYW
« Reply #158 on: Sat, 21 January 2017, 13:13:07 »
Could it possibly reach the moq before being approved?

Offline loud_asian

  • Posts: 516
  • ayylmao
Re: [IC]GMK Dolch (Icon Mod+AddON) PLUS x-CMYW
« Reply #159 on: Sat, 21 January 2017, 17:32:34 »
I thought the google form was just a draft and that the GB hasn't start yet..
keyboards are lame

Offline gnmar2723

  • Posts: 321
  • Location: Minnesota
  • i just want it to stop
Re: [IC]GMK Dolch (Icon Mod+AddON) PLUS x-CMYW
« Reply #160 on: Sat, 21 January 2017, 18:08:03 »
I thought the google form was just a draft and that the GB hasn't start yet..

I don't wanna put my address into a draft. Also, at the top of the page with the timeline, it said go start: Jan 20
gnmar2723's projects

I generally concentrate on the stop light. When that **** turns green its mother****ing Nürburgring time.

Offline exanile_tabasco

  • Posts: 78
  • Location: United Kingdom
  • settling down
Re: [IC]GMK Dolch (Icon Mod+AddON) PLUS x-CMYW
« Reply #161 on: Sun, 22 January 2017, 13:54:26 »
Extremely excited and can't wait for this! Classic Dolch is the very last thing I need in my life to round off my Cherry profile collection.

Offline kekkon

  • Thread Starter
  • Posts: 383
  • Location: MALAYSIA
Re: [IC]GMK Dolch (Icon Mod+AddON) PLUS x-CMYW
« Reply #162 on: Mon, 23 January 2017, 06:10:18 »
Hi everyone, sorry for the hiatus, was busy preparing for CNY.

I will open a thread at GB section later on and using the same form. Cheers.  :thumb:

Offline P1kas

  • Posts: 160
  • Location: Puerto Rico
  • AKA Crono
Re: [IC]GMK Dolch (Icon Mod+AddON) PLUS x-CMYW
« Reply #163 on: Mon, 23 January 2017, 11:51:10 »
All the pics are down in the OP
There is no such thing as "too much orange."

Offline poolside

  • Posts: 691
  • Location: On the deck
Re: [IC]GMK Dolch (Ready for GB)
« Reply #164 on: Mon, 23 January 2017, 16:01:49 »
All the pics are down in the OP

This post from kekkon has the link to the kit mockups:  ;)

After some planning, here is the kits...some of the kits come with decimal because these are convert from Malaysian Ringgit(MYR), real rates T.B.D by your bank at the payment time.

(All key caps come with trays or shrink wrap.)

Updated Layout

1. Dolch Base (w/o spacebars) 122pcs : ±$99
2. Dolch AddON 29pcs : ±$35.30
3. Dolch Color Kits 18pcs : ±$19
4. x-CMYW : ±$45.60
5. CC Spacebars (6.25u + 7u) : ±$5

Color Used:
Dolch : N9, CC, CP, TU2
x-CMYW : TU2, MG1, N6, RO2, N5, AE, DY

I have separate the CC Spacebars from the Base, because I think some people might need extras or those with old dolch set will need them to replace their old shinny spacebars.  :))

Estimate shipping cost for those with Big-Trays will be $25 and small kits start from $5, all of these will be calculate again when we sent out the shipping invoices.

Online romevi

  • Formerly romevi
  • * Exalted Elder
  • Posts: 8066
  • Location: The Windy City
Re: [IC]GMK Dolch (Icon Mod+AddON) PLUS x-CMYW
« Reply #165 on: Mon, 23 January 2017, 16:24:43 »
This isn't in GB mode yet, is it? Still in IC phase?

Offline digifiend

  • Posts: 125
  • Location: The OC, CA
Re: [IC]GMK Dolch (Icon Mod+AddON) PLUS x-CMYW
« Reply #166 on: Tue, 24 January 2017, 11:53:17 »
This isn't in GB mode yet, is it? Still in IC phase?

I dont see it, but I'm half blind.
HHKB Pro 2 | KUL ES-87 w/MX Clears | Varmilo VA87MR w/ Gat Browns | Pok3r w/MX Clears | Pok3r RGB w/MX Silent Blacks | RF87U 55g

Offline kekkon

  • Thread Starter
  • Posts: 383
  • Location: MALAYSIA
Re: [IC]GMK Dolch (Icon Mod+AddON) PLUS x-CMYW
« Reply #167 on: Wed, 25 January 2017, 09:26:50 »
Still waiting approval. :)