geekhack

geekhack Marketplace => Interest Checks => Topic started by: kingnestea on Sun, 06 September 2020, 14:40:02

Title: [IC]Skog-reboot by Percent Studio (2020.12.02. GB is live)
Post by: kingnestea on Sun, 06 September 2020, 14:40:02
update 02/12/2020:

Group buy is live, locking this IC thread now.
https://percent.studio/collections/skog-reboot (https://percent.studio/collections/skog-reboot)

----------------------------------------------------------------------

update 27/11/2020:

It's been a while, we are finally there.
The pre-order of Skog-reboot is launching at 8am PST November 30th and will be open until December 18th.
More details about colour option can be found on https://percent.studio/pages/skog-reboot (https://percent.studio/pages/skog-reboot)
We have also sent out 8 prototypes to different reviewers.
Build stream/review of the board will be popping in the coming weeks!
Make sure you have joined our Discord to stay tuned!

----------------------------------------------------------------------

Update 2020.10.23.

Congratz to the winner of the knob design contest: JKaos

(https://imgur.com/LefRrD8.jpg)

----------------------------------------------------------------------

Update 2020.09.20.

Updated structural renders and layout render.
Plate thickness changed to 1.5mm
Added support to split backspace, split right shift for the solderable PCB.
Please see update in red below.

----------------------------------------------------------------------

Update 2020.09.11.:

Rotary knob design contest

The entry of design contest is closed, link for votes will be coming soon.

More
Dear all, this is the official launch of the rotary knob Geekhack design contest.
Please download the knob model in stp format with the Google drive link below.
E-mail to submit your work: 270084014@qq.com

Submission
  • Please send an e-mail to the submission mailbox with at least 3 screenshots of your design from different angle.
  • If you don't use any 3D software, please submit your design with 2D or hand drawn sketches
  • To avoid your submission being lost due to e-mail transmission problems, please also post screenshots of your design in reply to this IC thread.
  • Please fill in the submission form with below format and include it in your submission e-mail
    • Community(Geekhack/Discord/Reddit):
    • User name:
    • Name your design:

Submission window

2020.09.11 - 2020.09.25[/s]

Prizes

Knob model

https://drive.google.com/file/d/1nsesnKQ1W7_q2ulK4QfRaTf4osKq0x6X/view?usp=sharing (https://drive.google.com/file/d/1nsesnKQ1W7_q2ulK4QfRaTf4osKq0x6X/view?usp=sharing)

Can't wait to see your creative works! Good luck everybody!

----------------------------------------------------------------------

Dear Geekhackers:

This is kingnestea from Percent studio, and I'm here to introduce our latest project Skog-reboot.

Some words

As the first keyboard designed by Percent studio, Skog is not that wide spread as the Canoe.
It was late 2019 when we had the idea to give this iconic board a refresh.
(https://imgur.com/XzamjCX.jpg)
(https://imgur.com/EKmcJ2v.jpg)
(https://imgur.com/QTqCq7s.jpg)

After more than 10 revisions, we have finally come to a design that meets our standard and obsession for details.
Long story short, let's get into the details.

Key features


The case

The case will be anodised/powder coating/cerakote/electrophoresis 6063 aluminum depending on colour.
As a standard approach, we will provide colour combo's picked by us during the GB phase.
Different from the previous Percent studio GBs, this time we will provide Pantone colour code or colour samples for each colour available.

(https://imgur.com/uOPSU8z.jpg)
(https://imgur.com/3DUdkDd.jpg)
(https://imgur.com/ZGMigmc.jpg)
(https://imgur.com/4QHZmF8.jpg)
(https://imgur.com/3f4icHy.jpg)
(https://imgur.com/6seBdmj.jpg)
(https://imgur.com/MX4T5NS.jpg)

Available colour combo is tbd at the moment, we will probably put up a poll for this at a later stage.

Plate and PCB

At Percent studio, we agree that besides aesthetics, typing experience is not negligible.
We have added gaskets to the Canoe gen 2 and feedback is very positive.
This time, we are doing fully isolated gaskets to enhance this.
The keyboard kit will also come with a silicon dampener between the plate and PCB and a foam dampener between the PCB and bottom case, this together with the 1.5mm plate to reduce the hollow sounding.
FR4 will also be provided as material of the plate.

(https://imgur.com/Eij0txG.jpg)
(https://imgur.com/zD3J64E.jpg)
(https://imgur.com/MgdxSvw.jpg)
(https://imgur.com/F8dVqaW.jpg)

Old design:

More
(https://imgur.com/yqBbd4G.jpg)
(https://imgur.com/YVEBv6N.jpg)
(https://imgur.com/yc16Z1g.jpg)


This time, we will continue to provide Bluetooth options.
4 PCB options will be available during the GB phase.

The bluetooth function will be provided by a daughter board.
To avoid shipping issues, we are using a Nokia BL5C battery, which is easily accessible worldwide.
This also means the keyboard kit will not come with a battery if you choose the bluetooth option.

Next to the iconic RGB led strip, we are adding a rotary encoder above the arrow cluster to the Skog-reboot.
It will be programmable with QMK/VIA.

Please see below for supported layouts.

Solderable PCB:

(https://imgur.com/kGUj1MH.jpg)

Hot-swap PCB:

(https://imgur.com/9fqgwJ7.jpg)

Group buy

If you browse zFrontier regularly, you will probably be aware of this board.
The Chinese GB is running from Sep. 8th to 11th.
We encourage you to avoid the Chinese GB and wait for the international GB to avoid possible communication and shipping problems.

The international GB will launch once we think it is ready and will be hosted on our website https://percent.studio/ (https://percent.studio/)

Please also join our Discord to stay tuned! https://discord.gg/HZkuG2u (https://discord.gg/HZkuG2u)

Design contest

We have launched a design contest on zFrontier for the rotary dial knob and received 18 creative designs in only ONE week!
We are also doing this with you Geekhackers!
The model of the rotary dial knob will be shared in coming days.
I'll update how you can submit your work.
After the defined window of submission, we will put up a poll.
Winner who has the most votes will receive a Skog-reboot kit up to your choice and your design will be provided as option during the GB phase and probably later in stock on our webshop.
There will also be rewards for all participants of this contest.

(https://imgur.com/dxOPniM.jpg)
(https://imgur.com/6sv25bc.jpg)

For more renders and the zFrontier design contest, please check out our IC post on zFrontier. It is in Chinese though. https://www.zfrontier.com/app/flow/DrmOJg6B05lZ (https://www.zfrontier.com/app/flow/DrmOJg6B05lZ)

Thank you for your time and specially to those who has supported Percent studio with the previous projects!
You are the reason why we are still doing this!
Keep safe
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: kingnestea on Sun, 06 September 2020, 14:40:28
To all:

I apology if I don't reply directly to your question.
Every question/suggestion will be looked into and talked with members in China.
Once I have certain answers, I'll update the OP.

Thanks
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: yoot on Sun, 06 September 2020, 14:41:06
Looking good!
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: kuro0renji on Sun, 06 September 2020, 14:42:06
I'm in!
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: qwe59qwe59 on Sun, 06 September 2020, 14:43:34
Looks pretty nice. Really like the baby blue one.  :D
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: Zacharius on Sun, 06 September 2020, 14:46:24
Nice


Sent from my iPhone using Tapatalk
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: Boy_314 on Sun, 06 September 2020, 14:48:02
👀👀👀
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: Capsy on Sun, 06 September 2020, 14:48:10
Looks interesting. Will watch it's progress.
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: ttom on Sun, 06 September 2020, 14:51:39
Seeing those design sketches at the beginning of the IC is something really refreshing that I haven't really seen in keyboards before - love the thoroughness of the design process being applied here.

Looking forward to that contest you mentioned too, will definitely give it a shot myself.
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: verity on Sun, 06 September 2020, 15:03:58
Very interesting design choices, love the use of space with the area above the arrow keys. I'll be following this closely.
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: bisoromi on Sun, 06 September 2020, 15:08:15
Wowowow
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: VytrioL on Sun, 06 September 2020, 15:08:39
Will it support split backspace?

Sent from my SM-G965U using Tapatalk

Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: alleneentrekin on Sun, 06 September 2020, 15:09:23
Love the design sketches to see all the work that went into this, really hyped!

Sent from my Pixel 4 XL using Tapatalk

Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: Rumblehotep on Sun, 06 September 2020, 15:11:49
Reactor knob pls
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: kingnestea on Sun, 06 September 2020, 15:12:27
Quote from: VytrioL on Sun, 06 September 2020, 15:08:39
Will it support split backspace?

Sent from my SM-G965U using Tapatalk

I don't see why not...I'll ask them to add this in the next revision of renders.
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: mayne069 on Sun, 06 September 2020, 15:17:01
I'll definitely get one!


Gesendet von iPhone mit Tapatalk
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: Vlie on Sun, 06 September 2020, 15:19:56
when’s GB
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: violeaf on Sun, 06 September 2020, 15:29:50
On the zFrontier post it seems that the Chinese GB is happening from 8th Sep to 11th Sep. Is this IC for a separate GB?
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: dhb82 on Sun, 06 September 2020, 15:30:37
All in, looks so good.
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: clik_clak on Sun, 06 September 2020, 15:31:34
Quote from: violeaf on Sun, 06 September 2020, 15:29:50
On the zFrontier post it seems that the Chinese GB is happening from 8th Sep to 11th Sep. Is this IC for a separate GB?

The GB section very clearly covers this:

Group buy

If you browse zFrontier regularly, you will probably be aware of this board.
The Chinese GB is running from Sep. 8th to 11th.
We encourage you to avoid the Chinese GB and wait for the international GB to avoid possible communication and shipping problems.
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: violeaf on Sun, 06 September 2020, 15:34:37
Quote from: clik_clak on Sun, 06 September 2020, 15:31:34
The GB section very clearly covers this:

Group buy

If you browse zFrontier regularly, you will probably be aware of this board.
The Chinese GB is running from Sep. 8th to 11th.
We encourage you to avoid the Chinese GB and wait for the international GB to avoid possible communication and shipping problems.

My bad, can't read
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: fropsie on Sun, 06 September 2020, 16:05:03
Super interested!
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: phinix on Sun, 06 September 2020, 16:26:11
Very nice. I prefer Desert color.
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: nathanchere on Sun, 06 September 2020, 17:25:20
Following
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: sirieous on Sun, 06 September 2020, 17:27:56
Looks nice!
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: darthcapn on Sun, 06 September 2020, 19:23:54
Interesting. Looks amazing.

Sent from my SM-G988U using Tapatalk

Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: andrewregal on Sun, 06 September 2020, 19:50:33
Very well done IC post! Honestly love everything about this board. Can't wait to see color options
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: __init__ on Sun, 06 September 2020, 19:50:43
**** YES! My Canoe needs a buddy  ;D
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: gnhuy91 on Sun, 06 September 2020, 20:04:46
will there be a WKL blocker option?
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: purryoverlord on Sun, 06 September 2020, 20:23:59
I loved this. Would look great in a muted pink color
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: Owl on Sun, 06 September 2020, 20:33:21
Finally a TKL with a knob. And tastefully done at that! fantastic stuff. Will be following closely as well.
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: sygo_ on Sun, 06 September 2020, 22:36:55
Normally I dont like the look of TKL's but this is beautiful!
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: LeoZ on Sun, 06 September 2020, 23:15:47
Quote from: gnhuy91 on Sun, 06 September 2020, 20:04:46
will there be a WKL blocker option?
+1
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: isot0nic on Sun, 06 September 2020, 23:27:05
I’m in
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: 3yatt on Mon, 07 September 2020, 00:03:56
I'm in, especially for a navy or a bento shade of teal

we need more teal boards
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: floristfran on Mon, 07 September 2020, 00:05:05
Absolutely love this design will almost definitely be in on this

Sent from my SM-G960U using Tapatalk

Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: soloplayer on Mon, 07 September 2020, 01:35:36
would you provide POM plate? if yes that would be totally in for me
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: Araset on Mon, 07 September 2020, 01:46:05
If google translate works well it says it is an ultimited GB, will it be unlimited for international customers too?
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: kingnestea on Mon, 07 September 2020, 01:53:31
Quote from: Araset on Mon, 07 September 2020, 01:46:05
If google translate works well it says it is an ultimited GB, will it be unlimited for international customers too?

Yes, it will be unlimited except the Casio version.
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: kmao on Mon, 07 September 2020, 02:14:26
take my money
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: swarley on Mon, 07 September 2020, 02:23:47
This checks all the boxes for me.
I'm ready. Thanks for designing such a practical and beautiful kb!
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: Yangif on Mon, 07 September 2020, 02:58:06
So is the GB only on Taobao?
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: gavingoh on Mon, 07 September 2020, 03:03:33
Having additional foam between PCB and Case will be really desired to make the Skog sound even fuller and less hollow.
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: manaorme on Mon, 07 September 2020, 03:52:20
'X' Knob on RED is exactly what I want!
Will there any chance for the brass plate?
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: vi0till on Mon, 07 September 2020, 04:25:19
Quote from: LeoZ on Sun, 06 September 2020, 23:15:47
Quote from: gnhuy91 on Sun, 06 September 2020, 20:04:46
will there be a WKL blocker option?
+1
+1 for WKL. Total weight for this keyboard? I kinda like fr4, one of my favorite plate material.

Sent from my VOG-L29 using Tapatalk

Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: kingnestea on Mon, 07 September 2020, 05:00:53
Quote from: vi0till on Mon, 07 September 2020, 04:25:19
Quote from: LeoZ on Sun, 06 September 2020, 23:15:47
Quote from: gnhuy91 on Sun, 06 September 2020, 20:04:46
will there be a WKL blocker option?
+1
+1 for WKL. Total weight for this keyboard? I kinda like fr4, one of my favorite plate material.

Sent from my VOG-L29 using Tapatalk

Both WK and WKL will be available
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: gnhuy91 on Mon, 07 September 2020, 05:01:51
perfect!
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: quadrotiles on Mon, 07 September 2020, 05:29:12
The wine coloured one is perfect! I love it, and I'm in for that one :)
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: dibstern on Mon, 07 September 2020, 05:48:04
Quote from: kingnestea on Sun, 06 September 2020, 14:40:02
...
The Chinese GB is running from Sep. 8th to 11th.
We encourage you to avoid the Chinese GB and wait for the international GB to avoid possible communication and shipping problems.

The international GB will launch once we think it is ready and will be hosted on our website https://percent.studio/ (https://percent.studio/)
...

Why do you run GBs for the Chinese market first? Do your Chinese buyers have to accept a lower level of quality assurance? Or do we have to accept some nationalistic favouritism? This is probably a false dichotomy, I genuinely don't understand.
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: kingnestea on Mon, 07 September 2020, 08:29:43
Quote from: dibstern on Mon, 07 September 2020, 05:48:04
Quote from: kingnestea on Sun, 06 September 2020, 14:40:02
...
The Chinese GB is running from Sep. 8th to 11th.
We encourage you to avoid the Chinese GB and wait for the international GB to avoid possible communication and shipping problems.

The international GB will launch once we think it is ready and will be hosted on our website https://percent.studio/ (https://percent.studio/)
...

Why do you run GBs for the Chinese market first? Do your Chinese buyers have to accept a lower level of quality assurance? Or do we have to accept some nationalistic favouritism? This is probably a false dichotomy, I genuinely don't understand.

There are certain reasons why Chinese and Korean makers separate their domestic GBs from international GBs, e.g. ordering, shipping etc.
Chinese GBs are held mostly on Taobao and communicated on QQ rather than the GBs for western community are mostly held on shopify based webshops and communicated through e-mails or Discord.
Payment method is also totally different.
It is also not necessary that the Chinese GB will receive less qualitative product than the international GB, we will certainly merge the feedback we receive from this IC to the end product both for the Chinese GB and the international GB.
Knowing that the IC on zFrontier is done by now and the Chinese community has followed the development of Skog-reboot from months ago.
I do think running the Chinese GB first as we usually do is reasonable.
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: hottrout on Mon, 07 September 2020, 08:59:29
This looks like a really well designed TKL.  Interested to see how a prototype feels and sounds.  Watching with interest.
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: beekey on Mon, 07 September 2020, 09:11:20
Quote from: kingnestea on Sun, 06 September 2020, 15:12:27
Quote from: VytrioL on Sun, 06 September 2020, 15:08:39
Will it support split backspace?

Sent from my SM-G965U using Tapatalk

I don't see why not...I'll ask them to add this in the next revision of renders.
Would also be interested in split backspace.
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: tngpq on Mon, 07 September 2020, 09:17:17
Quote from: dibstern on Mon, 07 September 2020, 05:48:04
Quote from: kingnestea on Sun, 06 September 2020, 14:40:02
...
The Chinese GB is running from Sep. 8th to 11th.
We encourage you to avoid the Chinese GB and wait for the international GB to avoid possible communication and shipping problems.

The international GB will launch once we think it is ready and will be hosted on our website https://percent.studio/ (https://percent.studio/)
...

Why do you run GBs for the Chinese market first? Do your Chinese buyers have to accept a lower level of quality assurance? Or do we have to accept some nationalistic favouritism? This is probably a false dichotomy, I genuinely don't understand.

That's offensive man. It's because you probably never ran a business. Is it a must for a small scale business to go international at all stages of their business? Let alone it's an unlimited GB. Imagine the scale it would be if they put this out globally, especially for a well designed product like this. They are doing the smart thing by pushing out in stages for better QC not the other way around. I don't understand how you can tie that to favouritism.
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: nathanchere on Mon, 07 September 2020, 09:36:07
Quote from: dibstern on Mon, 07 September 2020, 05:48:04
Why do you run GBs for the Chinese market first? Do your Chinese buyers have to accept a lower level of quality assurance? Or do we have to accept some nationalistic favouritism? This is probably a false dichotomy, I genuinely don't understand.

Can't tell if you're just trolling or genuinely that damaged...
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: gminso on Mon, 07 September 2020, 11:19:44
can we have a bongo cat as a knob? it will look like a cat climbing out of the keyboard  ;D it must cost millions to produce tho
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: lnguyen_ on Mon, 07 September 2020, 17:41:16
Will the daughterboard for this be the same as the daughterboard used on the Volt-80 2020SS?
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: johnny5 on Mon, 07 September 2020, 20:21:34
interested
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: djbakasan on Mon, 07 September 2020, 20:26:54
Definitely interested, BT and swappable specifically if it's useful to understand how the distribution of PCBs might break down.  Looking forward to more updates.
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: rmendis on Mon, 07 September 2020, 20:59:30
Very nice design! Look forward to this one.
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: Hamel on Mon, 07 September 2020, 22:54:55
This is amazing. Def getting into this GB

나의 SM-G986N 의 Tapatalk에서 보냄

Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: jayoliver on Mon, 07 September 2020, 23:58:39
definitely interested to get into this gb!
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: Jo_hannes on Tue, 08 September 2020, 02:46:11
This looks awesome, I am very, very interested!
Just FYI (not sure this has been posted before), but this webpage by percent provides an excellent deep dive on the design and the options currently available in the Chinese group buy:  https://percent-studio.com/Skog-reboot (https://percent-studio.com/Skog-reboot)

/Johannes
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: r4wromg on Tue, 08 September 2020, 03:46:41
Loved the original Skog - any chance we see WKL as an option and homage to the first iteration?

+1 to split bs as well
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: Fjällräv on Tue, 08 September 2020, 03:49:57
Count me in for the interest!
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: Vinchenzol on Tue, 08 September 2020, 04:55:45
100% in :)
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: mulrond on Tue, 08 September 2020, 08:11:58
I would love to participate in this GB but for international GB, only payment option is PayPal(which is banned in my country). Is it OK to join the Chinese group buy even if we are not from Asian region?
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: konstantin on Tue, 08 September 2020, 09:51:17
Not big on TKLs, but I really dig this. The knob design contest is a cool idea!
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: mosekiah on Tue, 08 September 2020, 10:31:26
This is it. I'm in.
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: ilemondrop on Tue, 08 September 2020, 12:04:22
Can't wait, curious to know how the design content will be conducted. Depending on its complexity, might throw my hat in!
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: stevenT on Wed, 09 September 2020, 22:05:15
if I pick bluetooth version and don't have a battery, can I use it with plug-in cable like usual keyboard?
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: rohanmital on Thu, 10 September 2020, 17:17:39
Any word on pricing?
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: kingnestea on Thu, 10 September 2020, 18:40:29
Quote from: lnguyen_ on Mon, 07 September 2020, 17:41:16
Will the daughterboard for this be the same as the daughterboard used on the Volt-80 2020SS?

No, the PCB is totally different.
We have abandoned the firmware of Volt and went to QMK
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: kingnestea on Thu, 10 September 2020, 18:42:46
Quote from: stevenT on Wed, 09 September 2020, 22:05:15
if I pick bluetooth version and don't have a battery, can I use it with plug-in cable like usual keyboard?

Of course, BT PCB works just fine with a cable.
Title: Re: [IC]Skog-reboot by Percent Studio (TKL custom keyboard kit)
Post by: methbreath69 on Fri, 11 September 2020, 05:56:58
100% in if the PCB supports split backspace
Title: Re: [IC]Skog-reboot by Percent Studio (updated 2020.09.11: knob design contest)
Post by: kingnestea on Fri, 11 September 2020, 11:41:06
The entry of design contest is closed.

Update 2020.09.11.:

Rotary knob design contest

Dear all, this is the official launch of the rotary knob Geekhack design contest.
Please download the knob model in stp format with the Google drive link below.
E-mail to submit your work: 270084014@qq.com

Submission

Knob model

https://drive.google.com/file/d/1nsesnKQ1W7_q2ulK4QfRaTf4osKq0x6X/view?usp=sharing (https://drive.google.com/file/d/1nsesnKQ1W7_q2ulK4QfRaTf4osKq0x6X/view?usp=sharing)[/s]

Can't wait to see your creative works! Good luck everybody!
Title: Re: [IC]Skog-reboot by Percent Studio (updated 2020.09.11: knob design contest)
Post by: rohanmital on Fri, 11 September 2020, 11:53:57
Will the Hot swap PCB support all 1.25u bottom row? Or only the non-standard layout?
Title: Re: [IC]Skog-reboot by Percent Studio (updated 2020.09.11: knob design contest)
Post by: kingnestea on Fri, 11 September 2020, 11:58:21
Quote from: rohanmital on Fri, 11 September 2020, 11:53:57
Will the Hot swap PCB support all 1.25u bottom row? Or only the non-standard layout?

Only the non-standard layout
Title: Re: [IC]Skog-reboot by Percent Studio (updated 2020.09.11: knob design contest)
Post by: maximize on Fri, 11 September 2020, 14:11:54
What is the Casio version/color supposed to reference? Why is it white and blue with red accents?
Title: Re: [IC]Skog-reboot by Percent Studio (updated 2020.09.11: knob design contest)
Post by: champagnepaki on Fri, 11 September 2020, 22:01:25
Will the Casio colorway be part of the international group-buy? I'm based in the USA and am totally in (I will be getting the Skog-reboot not matter what, but want the Casio very much).

Since the Casio is limited, how will you guys handle the process of picking that colorway? Premium pricing or raffle/lottery? (I'm hoping for just paying extra or something). How will we select the Casio colorway in the group buy?

Also, will there be other knobs available or just the standard and the casio?
Title: Re: [IC]Skog-reboot by Percent Studio (updated 2020.09.11: knob design contest)
Post by: Wetherbee on Fri, 11 September 2020, 23:05:04
Quote from: kingnestea on Fri, 11 September 2020, 11:58:21
Quote from: rohanmital on Fri, 11 September 2020, 11:53:57
Will the Hot swap PCB support all 1.25u bottom row? Or only the non-standard layout?

Only the non-standard layout

Thank you! Hotswap stepped caps pls?
Title: Re: [IC]Skog-reboot by Percent Studio (updated 2020.09.11: knob design contest)
Post by: Wetherbee on Sat, 12 September 2020, 00:16:00
Any chance for a matching Bluetooth numpad to go with the SkogRe?

BoosterRe?
Title: Re: [IC]Skog-reboot by Percent Studio (updated 2020.09.11: knob design contest)
Post by: kingnestea on Sat, 12 September 2020, 03:44:55
Quote from: champagnepaki on Fri, 11 September 2020, 22:01:25
Will the Casio colorway be part of the international group-buy? I'm based in the USA and am totally in (I will be getting the Skog-reboot not matter what, but want the Casio very much).

Since the Casio is limited, how will you guys handle the process of picking that colorway? Premium pricing or raffle/lottery? (I'm hoping for just paying extra or something). How will we select the Casio colorway in the group buy?

Also, will there be other knobs available or just the standard and the casio?

Casio will be part of the int'l GB, limited though. It will be FCFS and the same price as the others.
Additional knobs will also be available, looking to do 1-2 knobs from the zFrontier contest and 1-2 from the Geekhack contest.
Title: Re: [IC]Skog-reboot by Percent Studio (updated 2020.09.11: knob design contest)
Post by: paulgali on Sat, 12 September 2020, 04:09:27
I am so tempted by this. Once my canoe ships I would 100% be on board.
Title: Re: [IC]Skog-reboot by Percent Studio (updated 2020.09.11: knob design contest)
Post by: KaosJ on Sat, 12 September 2020, 14:06:53
Submitted the PRK (Percent Rotary Knob)

I'm not a fan of brand logo on the top, but in this case i find your logo perfect for the knob, where the bottom of the branch of the logo is the pointer of the rotary knob :)  (also consider that the knob is in fact very small)

There are 2 versions of it, the difference is just the flat vs angled leg of the "pointer" (the bottom of the branch)

(https://i.imgur.com/HqhkH04.png)
(https://i.imgur.com/SqGeUFB.png)
(https://i.imgur.com/3MgJ9bW.png)


Edit (3 more renders from different angles):
(https://i.imgur.com/7qjbpsY.png)
(https://i.imgur.com/1sAaNiC.png)
(https://i.imgur.com/xLXpXXy.png)
Title: Re: [IC]Skog-reboot by Percent Studio (updated 2020.09.11: knob design contest)
Post by: hottrout on Sat, 12 September 2020, 15:05:46
Nice Knob.



Also happy that I have found the only legitimate place I could use that line.  Happy to help out.
Title: Re: [IC]Skog-reboot by Percent Studio (updated 2020.09.11: knob design contest)
Post by: kingnestea on Mon, 14 September 2020, 09:11:15
Quote from: KaosJ on Sat, 12 September 2020, 14:06:53
Submitted the PRK (Percent Rotary Knob)

I'm not a fan of brand logo on the top, but in this case i find your logo perfect for the knob, where the bottom of the branch of the logo is the pointer of the rotary knob :)  (also consider that the knob is in fact very small)

There are 2 versions of it, the difference is just the flat vs angled leg of the "pointer" (the bottom of the branch)

Show Image
(https://i.imgur.com/HqhkH04.png)

Show Image
(https://i.imgur.com/SqGeUFB.png)

Show Image
(https://i.imgur.com/3MgJ9bW.png)


Very nice
Title: Re: [IC]Skog-reboot by Percent Studio (updated 2020.09.11: knob design contest)
Post by: kbye on Mon, 14 September 2020, 16:00:08
Here's my submission.

I call it the Grippe knob, designed with ridges so it's grippy enough for use with one finger.

(https://i.imgur.com/9o3tNGm.png)

(https://i.imgur.com/YuPuRfi.png)

(https://i.imgur.com/mF4ycOj.png)

... so anyways, I was told I could only submit one design. But I already made two, so I figured I might as well share it here anyway.

Presenting...
(https://i.imgur.com/hPiVgwy.png)
Title: Re: [IC]Skog-reboot by Percent Studio (updated 2020.09.11: knob design contest)
Post by: kingnestea on Mon, 14 September 2020, 16:54:06
Quote from: kbye on Mon, 14 September 2020, 16:00:08

Presenting...
Show Image
(https://i.imgur.com/hPiVgwy.png)


I'm really digging this one...but I think it is quite hard to make.
Title: Re: [IC]Skog-reboot by Percent Studio (updated 2020.09.11: knob design contest)
Post by: quadrotiles on Tue, 15 September 2020, 09:00:28
I have a submission for the knobs as well. I can't do fancy renders like you guys, so I did my best drawing my ideas.

(https://i.imgur.com/FWkQE7f.png)

And a description of my idea:

Originally, I had the idea of making artisan "caps" for the rotary encoder. I drew a few fun designs, but I know that it would be hard to implement in a mass scale. While drawing the designs on the left, however, I had the idea of "what if we made a rotary knob that had a standard mx shaped stem on it?".

I don't know the dimensions of a rotary encoder, so there would have to probably some modifications (eg. making the knob taller), but the idea is to have an mx stem mount on the knob, so you can attach your own artisan keycaps or even make your own traditionally shaped knob with an mx mount.

Hope you like my doodles! :)

Here is a link to the imgur album (of one picture, lol): https://imgur.com/a/SmjMtZH
Title: Re: [IC]Skog-reboot by Percent Studio (updated 2020.09.11: knob design contest)
Post by: breckstar on Tue, 15 September 2020, 10:36:09
In honor of one of my favorite shows, I present the Community flag.
(https://i.imgur.com/pBxVeJ7.png)
Title: Re: [IC]Skog-reboot by Percent Studio (updated 2020.09.11: knob design contest)
Post by: ChimChanChim on Tue, 15 September 2020, 14:29:47
I think Im addicted to TKL first the time 80 and now this
Title: Re: [IC]Skog-reboot by Percent Studio (updated 2020.09.11: knob design contest)
Post by: ChimChanChim on Tue, 15 September 2020, 14:35:49
Based UwU knob

[attachimg=1]
[attachimg=2]
Knobs in GMK oni colorway

[attachimg=3]
Knob in SA bliss colorway

Knob is based off sets like SA bliss that have UwU keycaps as part of the set
Title: Re: [IC]Skog-reboot by Percent Studio (updated 2020.09.11: knob design contest)
Post by: paperassgasket on Tue, 15 September 2020, 17:23:23
Quote from: kbye on Mon, 14 September 2020, 16:00:08
Presenting...
Show Image
(https://i.imgur.com/hPiVgwy.png)


Welp that's it! Close the thread. It's over.
Title: Re: [IC]Skog-reboot by Percent Studio (updated 2020.09.11: knob design contest)
Post by: nathanchere on Wed, 16 September 2020, 02:42:19
Gregcoder or GTFO
Even without the white/black details filled in, just inset/embossed/engraved/whatever-the-appropriate-word-is
Title: Re: [IC]Skog-reboot by Percent Studio (updated 2020.09.11: knob design contest)
Post by: kingnestea on Thu, 17 September 2020, 23:35:18
Quote from: quadrotiles on Tue, 15 September 2020, 09:00:28
I have a submission for the knobs as well. I can't do fancy renders like you guys, so I did my best drawing my ideas.

Show Image
(https://i.imgur.com/FWkQE7f.png)


And a description of my idea:

Originally, I had the idea of making artisan "caps" for the rotary encoder. I drew a few fun designs, but I know that it would be hard to implement in a mass scale. While drawing the designs on the left, however, I had the idea of "what if we made a rotary knob that had a standard mx shaped stem on it?".

I don't know the dimensions of a rotary encoder, so there would have to probably some modifications (eg. making the knob taller), but the idea is to have an mx stem mount on the knob, so you can attach your own artisan keycaps or even make your own traditionally shaped knob with an mx mount.

Hope you like my doodles! :)

Here is a link to the imgur album (of one picture, lol): https://imgur.com/a/SmjMtZH

This is cute
Title: Re: [IC]Skog-reboot by Percent Studio (updated 2020.09.11: knob design contest)
Post by: Sephiephiroth on Fri, 18 September 2020, 05:24:35
Submission for rotary knob - Triskelion Rotary Knob. Not an original design, however, I thought one of the many meanings of the symbol - rebirth - fit well with the Skog-reboot. It's an ancient Celtic symbol (feel free to look it up). Excuse my poor sketch (symbol would be etched in, similar to other user's design), but I can't 3D model anything (no doubt it could be made better). For what it's worth, I like the one above using the studio logo - super well done.
[attachimg=1]
Title: Re: [IC]Skog-reboot by Percent Studio (updated 2020.09.11: knob design contest)
Post by: anticlockwise5 on Fri, 18 September 2020, 11:45:05
Gregcoder!! Though as a coder, I would love it if we could have a rubber duck on the knob: https://en.wikipedia.org/wiki/Rubber_duck_debugging

Not a designer, can't draw well, someone draw a duck on the knob?

Will wait for the GB to start

Update: with the danger of being laughed at, here's mine:

(https://i.imgur.com/eg9g1i2.jpg)
Title: Re: [IC]Skog-reboot by Percent Studio (updated 2020.09.11: knob design contest)
Post by: cspirou on Fri, 18 September 2020, 13:19:04
Quote from: Sephiephiroth on Fri, 18 September 2020, 05:24:35
Submission for rotary knob - Triskelion Rotary Knob. Not an original design, however, I thought one of the many meanings of the symbol - rebirth - fit well with the Skog-reboot. It's an ancient Celtic symbol (feel free to look it up). Excuse my poor sketch (symbol would be etched in, similar to other user's design), but I can't 3D model anything (no doubt it could be made better). For what it's worth, I like the one above using the studio logo - super well done.
(Attachment Link)

As someone from a celtic nation, I really want this one!
Title: Re: [IC]Skog-reboot by Percent Studio (updated 2020.09.11: knob design contest)
Post by: keystothelaunch on Sat, 19 September 2020, 02:19:26
I submitted "The Droplet" knob design.

I noticed that in the original renders, the knob looked small, squished, and close to the TKL cluster. As I tried to mimic the rotation of such a knob by holding it on the sides, I noticed that I would bump into the keycaps and be unable to complete a full rotation. So, my design takes into consideration the: "if you can't rotate it from the sides, you must rotate it from the top." The namesake of the knob comes from the shape of the indent at the top. The droplet shape, purposely larger and more indented on one side, allows the user's finger to rotate the knob from above as the finger settles in the concave region away from the center of rotation. This allows for quick and continuous one fingered use. A tactile bump is also included on the wider side of the indent so that someone doesn't accidentally try to use the narrower/shallower side of the indent. This knob has the same proportional height as the file included, but takes the cylinder all the way up to the top height, where there is a slight chamfer on the edges.
I did try to model the knob on a computer, but I am only slightly proficient in tinkercad, which is why the files are far from perfect (indent depth, seams).

[attachimg=1][attachimg=2][attachimg=3]
Title: Re: [IC]Skog-reboot by Percent Studio (updated 2020.09.11: knob design contest)
Post by: Cloods on Sat, 19 September 2020, 02:37:20
The band around the side is a little off to me, but loving everything else
Title: Re: [IC]Skog-reboot by Percent Studio (2020.09.20: updated structural design)
Post by: kingnestea on Sun, 20 September 2020, 07:05:18
Update 2020.09.20.

Updated structural renders and layout render.
Plate thickness changed to 1.5mm
Added support to split backspace, split right shift for the solderable PCB.
Please see OP update in red.
Title: Re: [IC]Skog-reboot by Percent Studio (2020.09.20: updated structural design)
Post by: otakism on Sun, 20 September 2020, 14:15:06
Looks awesome! I am in.
Title: Re: [IC]Skog-reboot by Percent Studio (2020.09.20: updated structural design)
Post by: stevenT on Sun, 20 September 2020, 20:39:54
Quote from: kingnestea on Sun, 20 September 2020, 07:05:18
Update 2020.09.20.

Updated structural renders and layout render.
Plate thickness changed to 1.5mm
Added support to split backspace, split right shift for the solderable PCB.
Please see OP update in red.

Will these new features apply for upcoming gb only or both previous skog reboot gb of China and upcoming one for international?
Title: Re: [IC]Skog-reboot by Percent Studio (2020.09.20: updated structural design)
Post by: spyruf on Sun, 20 September 2020, 20:59:28
Can the Bluetooth PCB connect to multiple devices and/or can the Bluetooth pcb be used in a USB mode.
Title: Re: [IC]Skog-reboot by Percent Studio (2020.09.20: updated structural design)
Post by: bball2 on Sun, 20 September 2020, 21:23:12
Looks great, can't wait to see what color options will be available!
Title: Re: [IC]Skog-reboot by Percent Studio (2020.09.20: updated structural design)
Post by: JCraftCables on Mon, 21 September 2020, 01:15:14
Very nice board! Really like the positioning of the knob :)

Here is my design submission as emailed:

Design name: Macaron Knob (because the top looks like a macaron :D)

Design concept: The design is primarily driven by 2 key elements. Firstly, the unique 2-stepped curved edge of the SKOG which has been incorporated into the knob. Secondly, the curved grooves on the underside of the SKOG which is vertically translated onto the knob to provide grip for turning. If desired, the percent studio logo can be engraved on the top, but I prefer it clean.

(https://i.imgur.com/JfQaaDm.png)
(https://i.imgur.com/QER3jOO.png)
(https://i.imgur.com/UfT5tNa.png)
(https://i.imgur.com/ueKiOq0.png)




Title: Re: [IC]Skog-reboot by Percent Studio (updated 2020.09.11: knob design contest)
Post by: nathanchere on Tue, 22 September 2020, 11:35:19
Quote from: KaosJ on Sat, 12 September 2020, 14:06:53
Submitted the PRK (Percent Rotary Knob)

Unlikely gregcoder aside, this is by far the one I'm most impressed by.
Title: Re: [IC]Skog-reboot by Percent Studio (2020.09.20: updated structural design)
Post by: Saturn Fall on Tue, 22 September 2020, 16:10:48
Man if the Gregcoder was an option I would beg for greg

Anyways, here is my submission. I kept the design simple since the knob is fairly small. This is my first time rendering, so I messed around with some colors and lighting while I was at it.

[attachimg=1]
[attachimg=2]
[attachimg=3]
Title: Re: [IC]Skog-reboot by Percent Studio (2020.09.20: updated structural design)
Post by: sartarelli on Tue, 22 September 2020, 18:12:02
Glad I saw this contest before deadline and also that this keyboard is coming back!
I submitted the design Amp Dial which I based on the most comfortable type of knobs I tried on old amplifiers. Besides comfortable use I was aiming for it to be simple to produce, so only one colour and not too complicated shapes. The contest triggered my interest in modeling and rendering, so this are my first renders.

[attach=1]
[attach=2]
[attach=3]
[attach=4]
Title: Re: [IC]Skog-reboot by Percent Studio (2020.09.20: updated structural design)
Post by: perry4761 on Wed, 23 September 2020, 01:15:45
My wallet is still bleeding after joining think6.5

I’m never going to financially recover from this
Title: Re: [IC]Skog-reboot by Percent Studio (2020.09.20: updated structural design)
Post by: Suavity on Thu, 24 September 2020, 13:46:13
I've been really enjoying everybody's submissions and decided to design a fun, colorful knob too.

Design Name: The Jelly Knob


(https://i.imgur.com/QpsTdyv.jpg)
(https://i.imgur.com/U4DfhGx.jpg)
(https://i.imgur.com/BFp9Skc.jpg)


Inspiration: A Jelly Fruit Cake. I was eating one the other day and decided that it'll be fun to see one used as a knob too.

Fun meets Function: Slot cuts were made on the outer circumference of the knob to offer the end-user a form of grip, while the indent on the top of the knob was inserted to offer a "cupping" function to the knob, should the knob ever be used to rotate using one finger. Credits goes to @keystothelaunch above for their tear-drop idea, which led to this knob's inspiration.

Other than that, I'm really excited for this board to come into fruition! :thumb:
Title: Re: [IC]Skog-reboot by Percent Studio (2020.09.20: updated structural design)
Post by: bertplasschaert on Thu, 24 September 2020, 15:03:46
Hey everyone, I just finished my entry for the Rotary knob design contest,
Hope you like it  ;D

Here are all the renders:
https://edubuas-my.sharepoint.com/:f:/g/personal/204074_buas_nl/EinakrOjNT5NgTOzJhjuCpwBUGf4ozojdT_4hEw6YlT_aQ?e=gdC7eR
 (https://edubuas-my.sharepoint.com/:f:/g/personal/204074_buas_nl/EinakrOjNT5NgTOzJhjuCpwBUGf4ozojdT_4hEw6YlT_aQ?e=gdC7eR)
Here you can see the model in your browser  :cool:
https://skfb.ly/6VrpS (https://skfb.ly/6VrpS)

[attach=1][attach=2][attach=3][attach=4]
[attach=5][attach=6][attach=7][attach=8]
Title: Re: [IC]Skog-reboot by Percent Studio (2020.09.20: updated structural design)
Post by: firstworldproblems on Thu, 24 September 2020, 15:14:08
Quote from: bertplasschaert on Thu, 24 September 2020, 15:03:46
Hey everyone, I just finished my entry for the Rotary knob design contest,
Hope you like it  ;D

Here are all the renders:
https://edubuas-my.sharepoint.com/:f:/g/personal/204074_buas_nl/EinakrOjNT5NgTOzJhjuCpwBUGf4ozojdT_4hEw6YlT_aQ?e=gdC7eR
 (https://edubuas-my.sharepoint.com/:f:/g/personal/204074_buas_nl/EinakrOjNT5NgTOzJhjuCpwBUGf4ozojdT_4hEw6YlT_aQ?e=gdC7eR)
Here you can see the model in your browser  :cool:
https://skfb.ly/6VrpS (https://skfb.ly/6VrpS)

(Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link)
(Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link)
My favourite!


(https://media0.giphy.com/media/qPVzemjFi150Q/giphy.gif?cid=349c9dd7pmslnat983nd6klfr8y7pfn9i0hhwdmqarn3n9fv&rid=giphy.gif)
Title: Re: [IC]Skog-reboot by Percent Studio (2020.09.20: updated structural design)
Post by: bertplasschaert on Thu, 24 September 2020, 16:02:40
Quote from: danjaf on Thu, 24 September 2020, 15:14:08
Quote from: bertplasschaert on Thu, 24 September 2020, 15:03:46
Hey everyone, I just finished my entry for the Rotary knob design contest,
Hope you like it  ;D

Here are all the renders:
https://edubuas-my.sharepoint.com/:f:/g/personal/204074_buas_nl/EinakrOjNT5NgTOzJhjuCpwBUGf4ozojdT_4hEw6YlT_aQ?e=gdC7eR
 (https://edubuas-my.sharepoint.com/:f:/g/personal/204074_buas_nl/EinakrOjNT5NgTOzJhjuCpwBUGf4ozojdT_4hEw6YlT_aQ?e=gdC7eR)
Here you can see the model in your browser  :cool:
https://skfb.ly/6VrpS (https://skfb.ly/6VrpS)



(Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link)
(Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link)
My favourite!


Show Image
(https://media0.giphy.com/media/qPVzemjFi150Q/giphy.gif?cid=349c9dd7pmslnat983nd6klfr8y7pfn9i0hhwdmqarn3n9fv&rid=giphy.gif)


Thank you so much :D
Title: Re: [IC]Skog-reboot by Percent Studio (2020.09.20: updated structural design)
Post by: ricesteam on Thu, 24 September 2020, 16:13:46
Awesome! Can't wait!
Title: Re: [IC]Skog-reboot by Percent Studio (2020.09.20: updated structural design)
Post by: praystashion on Thu, 24 September 2020, 20:39:52
I'm no artiste exactly, but I had a lot of fun with coming up with this. All the designs I've seen posted here and in the Discord have been awesome!

Here is my entry I dusted off my tablet for!

I wanted the crown to be a shiny, brilliant metal, and then the top to be a more satin finish (brushed aluminium for example?). I toyed with the idea of adding a simple "pearl" to use as an indicator, but realized I'm not sure exactly what kind of rotary encoder it's going to be. And to be fair it also looked horrendous, ehehe.

Here it is on the keyboard!
(https://i.imgur.com/IUnNOmB.png)

Above shot
(http://i.imgur.com/Yi7I1af.png) (https://imgur.com/Yi7I1af)

Detail shot
(http://i.imgur.com/t671xZA.png) (https://imgur.com/t671xZA)


Title: Re: [IC]Skog-reboot by Percent Studio (2020.09.20: updated structural design)
Post by: bball2 on Thu, 24 September 2020, 21:23:55
So many cool submissions! Hopefully many of these knobs are available to preorder!
Title: Re: [IC]Skog-reboot by Percent Studio (2020.09.20: updated structural design)
Post by: firstworldproblems on Thu, 24 September 2020, 21:28:13
Quote from: KaosJ on Sat, 12 September 2020, 14:06:53
Submitted the PRK (Percent Rotary Knob)

I'm not a fan of brand logo on the top, but in this case i find your logo perfect for the knob, where the bottom of the branch of the logo is the pointer of the rotary knob :)  (also consider that the knob is in fact very small)

There are 2 versions of it, the difference is just the flat vs angled leg of the "pointer" (the bottom of the branch)

Show Image
(https://i.imgur.com/HqhkH04.png)

Show Image
(https://i.imgur.com/SqGeUFB.png)

Show Image
(https://i.imgur.com/3MgJ9bW.png)

YESSSSS!

Sent from my Pixel 4 using Tapatalk

Title: Re: [IC]Skog-reboot by Percent Studio (2020.09.20: updated structural design)
Post by: hottrout on Fri, 25 September 2020, 06:38:42
Quote from: bertplasschaert on Thu, 24 September 2020, 15:03:46
Hey everyone, I just finished my entry for the Rotary knob design contest,
Hope you like it  ;D

Here are all the renders:
https://edubuas-my.sharepoint.com/:f:/g/personal/204074_buas_nl/EinakrOjNT5NgTOzJhjuCpwBUGf4ozojdT_4hEw6YlT_aQ?e=gdC7eR
 (https://edubuas-my.sharepoint.com/:f:/g/personal/204074_buas_nl/EinakrOjNT5NgTOzJhjuCpwBUGf4ozojdT_4hEw6YlT_aQ?e=gdC7eR)
Here you can see the model in your browser  :cool:
https://skfb.ly/6VrpS (https://skfb.ly/6VrpS)

(Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link)
(Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link)

This is the one.  Nice job.
Title: Re: [IC]Skog-reboot by Percent Studio (2020.09.20: updated structural design)
Post by: mosekiah on Fri, 25 September 2020, 14:27:32
Hello,

I submitted my design, Lightning Rebolt.

The lightning bolt idea came from reboot's synonyms: restart and renew. A jolt of electricity giving life to a project that's both exciting and nostalgic, new yet familiar.
Lightning Bolt + Reboot = Lightning Rebolt  :D

The one thing I would change and didn't have time to do is the color. I would like it to be that deep red metallic finish shown on the "X" knob in the original post's renders.

The Geekhack community has been an amazing place since I discovered it just a few months ago. Joy is only complete when shared and that's exactly what this community has done for me. In full transparency, I reached out for help on Fiverr to get a more professionally done rendering of my basic MS Paint skills by <ranganaghg> so shout out to him for his help!

Very excited for this GB and best wishes to Percent Studio and all the rotary knob creators! :thumb:

(https://i.imgur.com/KSwlBNr.png)
(https://i.imgur.com/p5A4SGu.png)
(https://i.imgur.com/HdosjpV.png)
Title: Re: [IC]Skog-reboot by Percent Studio (updated 2020.09.11: knob design contest)
Post by: Kerasan on Fri, 25 September 2020, 15:21:42
Quote from: KaosJ on Sat, 12 September 2020, 14:06:53
Submitted the PRK (Percent Rotary Knob)

I'm not a fan of brand logo on the top, but in this case i find your logo perfect for the knob, where the bottom of the branch of the logo is the pointer of the rotary knob :)  (also consider that the knob is in fact very small)

There are 2 versions of it, the difference is just the flat vs angled leg of the "pointer" (the bottom of the branch)

Show Image
(https://i.imgur.com/HqhkH04.png)

Show Image
(https://i.imgur.com/SqGeUFB.png)

Show Image
(https://i.imgur.com/3MgJ9bW.png)


Very Nice, I love shiny sample!
Title: Re: [IC]Skog-reboot by Percent Studio (2020.09.20: updated structural design)
Post by: akimbra on Fri, 25 September 2020, 18:03:54
Hello, I submitted my design via email with a longer introduction but due to time constrictions and the UK time just hitting 12AM, I present to you the "Free the nipple" design. It is easily gripped and inspires us with fond memories of old laptops ;) with the nipple mouse in the middle of the keyboard.

First time using 3d software so don't be harsh please.

I wish everyone good luck in the contest as well as good luck to Percent Studios with another crazy design and crazy sales numbers.
Title: Re: [IC]Skog-reboot by Percent Studio (2020.09.20: updated structural design)
Post by: methbreath69 on Sat, 26 September 2020, 04:07:37
Introducing the Skog Cog! First time 3D modeling ;D I had a ton of fun putting something together for what I think will be an fantastic board.

[attachimg=1]
[attachimg=2]
[attachimg=3]
Title: Re: [IC]Skog-reboot by Percent Studio (updated 2020.09.11: knob design contest)
Post by: raz on Sat, 26 September 2020, 10:30:10
Quote from: KaosJ on Sat, 12 September 2020, 14:06:53
Submitted the PRK (Percent Rotary Knob)

I'm not a fan of brand logo on the top, but in this case i find your logo perfect for the knob, where the bottom of the branch of the logo is the pointer of the rotary knob :)  (also consider that the knob is in fact very small)

There are 2 versions of it, the difference is just the flat vs angled leg of the "pointer" (the bottom of the branch)

Show Image
(https://i.imgur.com/HqhkH04.png)

Show Image
(https://i.imgur.com/SqGeUFB.png)

Show Image
(https://i.imgur.com/3MgJ9bW.png)



Edit (3 more renders from different angles):
Show Image
(https://i.imgur.com/7qjbpsY.png)

Show Image
(https://i.imgur.com/1sAaNiC.png)

Show Image
(https://i.imgur.com/xLXpXXy.png)


i have to admit: the black one is sexy.
Title: Re: [IC]Skog-reboot by Percent Studio (2020.09.20: updated structural design)
Post by: kingnestea on Sun, 27 September 2020, 15:08:32
Quote from: bertplasschaert on Thu, 24 September 2020, 15:03:46
Hey everyone, I just finished my entry for the Rotary knob design contest,
Hope you like it  ;D

Here are all the renders:
https://edubuas-my.sharepoint.com/:f:/g/personal/204074_buas_nl/EinakrOjNT5NgTOzJhjuCpwBUGf4ozojdT_4hEw6YlT_aQ?e=gdC7eR
 (https://edubuas-my.sharepoint.com/:f:/g/personal/204074_buas_nl/EinakrOjNT5NgTOzJhjuCpwBUGf4ozojdT_4hEw6YlT_aQ?e=gdC7eR)
Here you can see the model in your browser  :cool:
https://skfb.ly/6VrpS (https://skfb.ly/6VrpS)

(Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link)
(Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link)

This is quite nice. :-*
Title: Re: [IC]Skog-reboot by Percent Studio (2020.09.20: updated structural design)
Post by: kingnestea on Sat, 10 October 2020, 09:43:06
The poll for the Skog-reboot design contest is up! please consider voting for your favourite knob design! Good luck for all contributors ! The poll will be up until 24/10/2020.
https://forms.gle/uVQYzbKukwXobBPX6 (https://forms.gle/uVQYzbKukwXobBPX6)
Title: Re: [IC]Skog-reboot by Percent Studio (2020.10.10: poll for the knob design contest)
Post by: maximize on Sat, 10 October 2020, 22:22:26
I see that delivery of the GB in China ended September 11 and is expected to take 4-6 months until delivery ("under normal circumstances"). Are you planning to wait until you have finished shipping the China GB orders before you open up the international GB? Thanks!
Title: Re: [IC]Skog-reboot by Percent Studio (2020.10.10: poll for the knob design contest)
Post by: kingnestea on Sun, 11 October 2020, 21:45:51
Quote from: maximize on Sat, 10 October 2020, 22:22:26
I see that delivery of the GB in China ended September 11 and is expected to take 4-6 months until delivery ("under normal circumstances"). Are you planning to wait until you have finished shipping the China GB orders before you open up the international GB? Thanks!

No, the international GB is currently scheduled for mid/late November depending on prototyping progress
Title: Re: [IC]Skog-reboot by Percent Studio (2020.10.10: poll for the knob design contest)
Post by: hong@RebultKeyboards on Mon, 12 October 2020, 12:07:50
Stunning! Don't really mind any of the knobs, all will probably look good on this board. Can't wait for the final knob design and gb.
Title: Re: [IC]Skog-reboot by Percent Studio (2020.10.10: poll for the knob design contest)
Post by: Vadurr on Mon, 12 October 2020, 14:46:43
Down with any knob as long as its relatively low profile and sleek.
Title: Re: [IC]Skog-reboot by Percent Studio (2020.10.10: poll for the knob design contest)
Post by: maximize on Wed, 14 October 2020, 14:59:02
Quote from: kingnestea on Sun, 11 October 2020, 21:45:51
Quote from: maximize on Sat, 10 October 2020, 22:22:26
I see that delivery of the GB in China ended September 11 and is expected to take 4-6 months until delivery ("under normal circumstances"). Are you planning to wait until you have finished shipping the China GB orders before you open up the international GB? Thanks!

No, the international GB is currently scheduled for mid/late November depending on prototyping progress

Super awesome, thank you!
Title: Re: [IC]Skog-reboot by Percent Studio (2020.10.10: poll for the knob design contest)
Post by: kingnestea on Fri, 23 October 2020, 07:05:59
Last day for the knob design contest poll!
Title: Re: [IC]Skog-reboot by Percent Studio (2020.10.10: poll for the knob design contest)
Post by: nathanchere on Fri, 23 October 2020, 09:07:51
Voted, and +2 for gregcoder which for some reason doesn't show on my form
Title: Re: [IC]Skog-reboot by Percent Studio (2020.10.23: winner of the contest announced)
Post by: kingnestea on Fri, 23 October 2020, 16:42:59
Quote from: KaosJ on Sat, 12 September 2020, 14:06:53
Submitted the PRK (Percent Rotary Knob)

I'm not a fan of brand logo on the top, but in this case i find your logo perfect for the knob, where the bottom of the branch of the logo is the pointer of the rotary knob :)  (also consider that the knob is in fact very small)

There are 2 versions of it, the difference is just the flat vs angled leg of the "pointer" (the bottom of the branch)

Show Image
(https://i.imgur.com/HqhkH04.png)

Show Image
(https://i.imgur.com/SqGeUFB.png)

Show Image
(https://i.imgur.com/3MgJ9bW.png)



Edit (3 more renders from different angles):
Show Image
(https://i.imgur.com/7qjbpsY.png)

Show Image
(https://i.imgur.com/1sAaNiC.png)

Show Image
(https://i.imgur.com/xLXpXXy.png)


Update 2020.10.23.

Congratz to the winner of the knob design contest: JKaos

(https://imgur.com/LefRrD8.jpg)
Title: Re: [IC]Skog-reboot by Percent Studio (2020.10.23: winner of the contest announced)
Post by: pool on Sat, 24 October 2020, 00:46:15
I am so in
Title: Re: [IC]Skog-reboot by Percent Studio (2020.10.23: winner of the contest announced)
Post by: KaosJ on Sat, 24 October 2020, 05:43:56
Quote from: kingnestea on Fri, 23 October 2020, 16:42:59
Quote from: KaosJ on Sat, 12 September 2020, 14:06:53
Submitted the PRK (Percent Rotary Knob)

I'm not a fan of brand logo on the top, but in this case i find your logo perfect for the knob, where the bottom of the branch of the logo is the pointer of the rotary knob :)  (also consider that the knob is in fact very small)

There are 2 versions of it, the difference is just the flat vs angled leg of the "pointer" (the bottom of the branch)

Show Image
(https://i.imgur.com/HqhkH04.png)

Show Image
(https://i.imgur.com/SqGeUFB.png)

Show Image
(https://i.imgur.com/3MgJ9bW.png)



Edit (3 more renders from different angles):
Show Image
(https://i.imgur.com/7qjbpsY.png)

Show Image
(https://i.imgur.com/1sAaNiC.png)

Show Image
(https://i.imgur.com/xLXpXXy.png)


Update 2020.10.23.

Congratz to the winner of the knob design contest: JKaos

Show Image
(https://imgur.com/LefRrD8.jpg)


WTF Wooooooo
Thanks guys!
Title: Re: [IC]Skog-reboot by Percent Studio (2020.10.23: winner of the contest announced)
Post by: rohanmital on Sat, 31 October 2020, 13:39:56
When will the international GB be run? Also what price range?
Title: Re: [IC]Skog-reboot by Percent Studio (2020.10.10: poll for the knob design contest)
Post by: maximize on Sun, 01 November 2020, 08:52:49
Quote from: kingnestea on Sun, 11 October 2020, 21:45:51
Quote from: maximize on Sat, 10 October 2020, 22:22:26
I see that delivery of the GB in China ended September 11 and is expected to take 4-6 months until delivery ("under normal circumstances"). Are you planning to wait until you have finished shipping the China GB orders before you open up the international GB? Thanks!

No, the international GB is currently scheduled for mid/late November depending on prototyping progress

Wait a minute, so the China GB went ahead without a prototype in hand?
Title: Re: [IC]Skog-reboot by Percent Studio (2020.10.23: winner of the contest announced)
Post by: The.Ryan.Gamer on Sun, 01 November 2020, 09:52:52
Too many great boards coming up. RIP Wallet. Looking forward for this to go live.
Title: Re: [IC]Skog-reboot by Percent Studio (2020.10.23: winner of the contest announced)
Post by: bball2 on Mon, 09 November 2020, 00:15:14
Any update on group buy date?
Title: Re: [IC]Skog-reboot by Percent Studio (2020.10.23: winner of the contest announced)
Post by: Araset on Thu, 12 November 2020, 04:24:38
Any news yet?
Title: Re: [IC]Skog-reboot by Percent Studio (2020.10.23: winner of the contest announced)
Post by: maximize on Thu, 12 November 2020, 18:01:54
No updates until prototypes are ready.
Title: Re: [IC]Skog-reboot by Percent Studio (2020.10.23: winner of the contest announced)
Post by: The.Ryan.Gamer on Tue, 17 November 2020, 10:48:05
Lesgooooo! UNLI GB Gang. Thank you for doing this.
Title: Re: [IC]Skog-reboot by Percent Studio (2020.10.23: winner of the contest announced)
Post by: phinix on Fri, 20 November 2020, 16:37:55
GB starts November 30th and will be open until December 18th
Title: Re: [IC]Skog-reboot by Percent Studio (2020.10.23: winner of the contest announced)
Post by: hottrout on Mon, 23 November 2020, 06:32:19
Looking forward to this one for sure. 
Title: Re: [IC]Skog-reboot by Percent Studio (2020.10.23: winner of the contest announced)
Post by: kingnestea on Fri, 27 November 2020, 14:43:05
update 27/11/2020:

It's been a while, we are finally there.
The GB of Skog-reboot is launching on November 30th and will be open until December 18th.
More details about color option can be found on https://percent.studio/pages/skog-reboot (https://percent.studio/pages/skog-reboot)
We have also sent out 8 prototypes to different reviewers.
Build stream/review of the board will be popping in the coming weeks!
Title: Re: [IC]Skog-reboot by Percent Studio (2020.10.23: winner of the contest announced)
Post by: maximize on Sat, 28 November 2020, 19:30:01
Quote from: kingnestea on Fri, 27 November 2020, 14:43:05
update 27/11/2020:

It's been a while, we are finally there.
The GB of Skog-reboot is launching on November 30th and will be open until December 18th.
More details about color option can be found on https://percent.studio/pages/skog-reboot (https://percent.studio/pages/skog-reboot)
We have also sent out 8 prototypes to different reviewers.
Build stream/review of the board will be popping in the coming weeks!

FYI, it's impossible to navigate to the updated Skog Reboot page from your website's homepage. You might want to update the site!
Title: Re: [IC]Skog-reboot by Percent Studio (2020.11.27: GB launching on November 30th)
Post by: hottrout on Sun, 29 November 2020, 10:18:07
Desert looks amazing.  I can't wait to order my TKL Desert with FR4 and get it built. 
Title: Re: [IC]Skog-reboot by Percent Studio (2020.11.27: GB launching on November 30th)
Post by: kingnestea on Sun, 29 November 2020, 10:48:02
Quote from: hottrout on Sun, 29 November 2020, 10:18:07
Desert looks amazing.  I can't wait to order my TKL Desert with FR4 and get it built.

FR4 plates will not be available with the GB, it will be provided as in-stock item later. :-[
Title: Re: [IC]Skog-reboot by Percent Studio (2020.11.27: GB launching on November 30th)
Post by: Obamas Mama on Mon, 30 November 2020, 22:11:03
Oh boy, if the QC is going to be anything like past Percent runs then this will be a **** show. Good luck all
Title: Re: [IC]Skog-reboot by Percent Studio (2020.11.27: GB launching on November 30th)
Post by: bball2 on Mon, 30 November 2020, 23:48:58
Looks like the casio version sold out in about 7 mins - lots of build streams coming up soon too!
Title: Re: [IC]Skog-reboot by Percent Studio (2020.11.27: GB launching on November 30th)
Post by: hottrout on Tue, 01 December 2020, 03:41:24
Ordered with extra knobs on.  Great colours and looks like a really nice TKL.  Looking forward to building this.
Title: Re: [IC]Skog-reboot by Percent Studio (2020.11.27: GB launching on November 30th)
Post by: floristfran on Wed, 02 December 2020, 00:38:32
glad to see theres no purple, saves me 419 dollars  :p
Title: Re: [IC]Skog-reboot by Percent Studio (2020.12.02. GB is live)
Post by: kingnestea on Wed, 02 December 2020, 14:43:26
update 02/12/2020:

Group buy is live, locking this IC thread now.
https://percent.studio/collections/skog-reboot (https://percent.studio/collections/skog-reboot)