[GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)

[gr4v3m4n]

Quick question.

I'm currently looking for stabs for my incoming YAS
Going for a 6,25u space (so 1,5u / 1,5u, 6,25u / 1,25u, 1 / 1 / 1 bottom row), and most likely a split backspace, rest regular ansi.

Do I need pcb or plate mounted stabs?
And if I'm correct;
2u (left shift)
2u (enter)
6,25u (space)

That's it right? Assuming I'm going with a split backspace.

Yep that's correct.
For PCB or Plate mount depend on what you like.
I use PCB mount for shift and enter, and Plate mount for spacebar.

Are extras going to be shipped soon?

Not yet. Currently on remaking plate.
I am ready to ship it last week but when i'm check it again to make sure everythings good before i ship, plate size just too large about 1cm unfortunatelly.
Hope end of this week plate ready.

Good to hear extra's are close to getting shipped since my case is getting shipped this week as well

For the stabs, I can use both pcb AND plate mount, is that correct?

unless you got non universal plate like mine, plate and pcb mount are good to go



Sent from my iPhone using Tapatalk

[Che.R.Ry]

Finally done, my first ever custom board!
Thx silentreader for making this come true, love it so much 
*Sorry for potato pic, dont have proper camera and poor photography skill lol

[ihalatch]

Finally done, my first ever custom board!
Thx silentreader for making this come true, love it so much 
*Sorry for potato pic, dont have proper camera and poor photography skill lol

Which case is this? Looks great.

[Che.R.Ry]

Finally done, my first ever custom board!
Thx silentreader for making this come true, love it so much 
*Sorry for potato pic, dont have proper camera and poor photography skill lol

Which case is this? Looks great.

TINA YAS from kbdfans
Thx!

[PlastikSchnittstelle]

FINALLY, I got the GB for my "alternative top-mount case" started!
this means more choice for silentreaders sweet YAS62 PCB.

-> SKB60-YAS GB

[teamrushpntball]

Configured my keyboard the first time, trying to go back and change led color a few weeks later I can't get it to connect.  Just repeated connection failed errors.  Any suggestions? 

I have:
Disconnected Keyboard
Reinstalled Software
Restarted PC
Repeat above a few times

[yasintahir]

Configured my keyboard the first time, trying to go back and change led color a few weeks later I can't get it to connect.  Just repeated connection failed errors.  Any suggestions? 

I have:
Disconnected Keyboard
Reinstalled Software
Restarted PC
Repeat above a few times

Do you use lastest firmware? and put usb cable on the back panel? because sometime i can't get to connect if use front panel usb

[teamrushpntball]

Randomly working, swapped usb ports was apparently enough.

[mniels]

Please forgive me if this has been posted earlier in the thread, but what case are most people using?  Trying to decide between a standard and more "HHKB" type of layout, which obviously makes the case selection a little harder.  I have a cheap little translucent case that I will possibly use, but curious what others have done.  I have been out of the keyboard game long enough to know that there may be better options out there now.

Thanks for the input!

[ayamterbang]

Please forgive me if this has been posted earlier in the thread, but what case are most people using?  Trying to decide between a standard and more "HHKB" type of layout, which obviously makes the case selection a little harder.  I have a cheap little translucent case that I will possibly use, but curious what others have done.  I have been out of the keyboard game long enough to know that there may be better options out there now.

Thanks for the input!

You may checkk the GB of SKB60 case by plastikschnittstelle above for current available yas options.

Kbdfans from china used to supply Tina case made specifically for yas62.

Or you may build your own sandwich style.
Someone build and posted his creation on this thread.

Most people here (probably) grabbed tina (which I did), but as stated earlier. They're no longer produce it.


Hope it helps.


Sent from my SM-G930F using Tapatalk

[ullr]

kbdfans still has a couple of cases in stock

[yasintahir]

Please forgive me if this has been posted earlier in the thread, but what case are most people using?  Trying to decide between a standard and more "HHKB" type of layout, which obviously makes the case selection a little harder.  I have a cheap little translucent case that I will possibly use, but curious what others have done.  I have been out of the keyboard game long enough to know that there may be better options out there now.

Thanks for the input!

Kbdfans sold about 30 Pcs for this PCB.
Someone made acrylic case for this.
And appreantly running right now is SKB60.
But you can use transculent universal case too.

[yasintahir]

kbdfans still has a couple of cases in stock

They already gone.
Kbdfans just didn't update it yet on their website.

[odd]

I might need to by another PCB. Everything was working fine until a few days ago when the RGB backlighting is enabled it just flashes random colors or it seems like there is not enough juice since the RGB lights seems to blink on and off or have a ver faint color. I have tried different cables, different usb ports and different computers and the behavior is all the same.

This happen to anyone else?

help 

[Draic]

any chance we might see a V2 with USB-C in the near future? :x

I really like the layout, but decided to not get anything mini-USB anymore

[vtachkov]

Sent you a PM silent.

[yasintahir]

I might need to by another PCB. Everything was working fine until a few days ago when the RGB backlighting is enabled it just flashes random colors or it seems like there is not enough juice since the RGB lights seems to blink on and off or have a ver faint color. I have tried different cables, different usb ports and different computers and the behavior is all the same.

This happen to anyone else?

help 

Seems your smd led need to replace. Do you have picture of that?
I think i can send you another one but you need to pay shipping fee.
Contact me on telegram https://t.me/yasintahir
Or on  discord yas#5168 for fast respond.

[yasintahir]

any chance we might see a V2 with USB-C in the near future? :x

I really like the layout, but decided to not get anything mini-USB anymore

Not really sure though.
But maybe i will do that together bundle with case this time.

Sent you a PM silent.

Replied 

[C7Kinetic]

any chance we might see a V2 with USB-C in the near future? :x

I really like the layout, but decided to not get anything mini-USB anymore

Not really sure though.
But maybe i will do that together bundle with case this time.

If you ever do a R2, I'm definitely hopping back in. This is literally my favorite layout 

[E_rik]

Any news about shipping the extras?

[yasintahir]

Any news about shipping the extras?

It's already shipped, some people already get their PCB. Pm me to get your tracking number

[Poesjuh]

Who can help me get the underglow working on my YAS? I have everything up and running via Jigon, but can't get the RGB to work. No matter how hard I try When I first plugged in the pcb to see if it was working I had the blue fading underglow, however after building it never came back Btw, for those interested, build is as you understand complete and I have a typing video here:

(yes my nails are not the prettiest, excuse me for not having nail polish and biting my nails )

[Poesjuh]

Who can help me get the underglow working on my YAS? I have everything up and running via Jigon, but can't get the RGB to work. No matter how hard I try When I first plugged in the pcb to see if it was working I had the blue fading underglow, however after building it never came back Btw, for those interested, build is as you understand complete and I have a typing video here:

(yes my nails are not the prettiest, excuse me for not having nail polish and biting my nails )

So I’ve checked multiple firmware’s, reset it, older versions of JigOn. Nothing how can I check if my pcb might be broken? (The leds at least.)


Sent from my iPhone using Tapatalk

[binnie]

I want to join this GB but I don't have any experience with importation (I live in USA). Would that 40 euro shipping estimation include import fees? Does DHL handle that kind of stuff? I think I have the money to spend on keyboard stuff right now but I just don't want to get shocked with customs charges when it arrives haha.

edit: commented in the wrong thread I had open aaaaaa ignore this.

[Poesjuh]

So even though I’m having some backlight problems, here is my build decided to go and try split space.




Sent from my iPhone using Tapatalk

[child]

I have some questions about Leeku firmware/Jigon tool:
* is it possible to switch some layer on momentarily other than Fn layer? There are L0 to L2, but from what I see they can only be switched on "permanently", and I want to switch them on just as long as the layer-switch key is held down
* I'd like to have additional modifier key in addition to Ctrl/Shift/Alt, like Hyper (on Linux). Is it possible to set it up?
* is it possible to have a double-role tap/press key? I think SpaceFn is an example of such a key

[Harms]

Are the extras being shipped?

I ordered an extra almost a month ago and have not received an email about shipping or anything.

Thanks.

[yasintahir]

I have some questions about Leeku firmware/Jigon tool:
* is it possible to switch some layer on momentarily other than Fn layer? There are L0 to L2, but from what I see they can only be switched on "permanently", and I want to switch them on just as long as the layer-switch key is held down
* I'd like to have additional modifier key in addition to Ctrl/Shift/Alt, like Hyper (on Linux). Is it possible to set it up?
* is it possible to have a double-role tap/press key? I think SpaceFn is an example of such a key

Same problem with mine, i just found this option on qmk

Are the extras being shipped?

I ordered an extra almost a month ago and have not received an email about shipping or anything.

Thanks.

Updated tracking number on your paypal invoices.
Package already at your country and ready to pickup

[Harms]

Thank you 

[child]

I have some questions about Leeku firmware/Jigon tool:
* is it possible to switch some layer on momentarily other than Fn layer? There are L0 to L2, but from what I see they can only be switched on "permanently", and I want to switch them on just as long as the layer-switch key is held down
* I'd like to have additional modifier key in addition to Ctrl/Shift/Alt, like Hyper (on Linux). Is it possible to set it up?
* is it possible to have a double-role tap/press key? I think SpaceFn is an example of such a key

Same problem with mine, i just found this option on qmk

Is it possible to flash this board with qmk?

[yasintahir]

I have some questions about Leeku firmware/Jigon tool:
* is it possible to switch some layer on momentarily other than Fn layer? There are L0 to L2, but from what I see they can only be switched on "permanently", and I want to switch them on just as long as the layer-switch key is held down
* I'd like to have additional modifier key in addition to Ctrl/Shift/Alt, like Hyper (on Linux). Is it possible to set it up?
* is it possible to have a double-role tap/press key? I think SpaceFn is an example of such a key

Same problem with mine, i just found this option on qmk

Is it possible to flash this board with qmk?

Theorically yes, because some old board from leeku have qmk firmware available. But this controller use by leeku easy to brick hard to port to qmk.

[E_rik]

I have some questions about Leeku firmware/Jigon tool:
* is it possible to switch some layer on momentarily other than Fn layer? There are L0 to L2, but from what I see they can only be switched on "permanently", and I want to switch them on just as long as the layer-switch key is held down
* I'd like to have additional modifier key in addition to Ctrl/Shift/Alt, like Hyper (on Linux). Is it possible to set it up?
* is it possible to have a double-role tap/press key? I think SpaceFn is an example of such a key

These are not supported by JigOn. But you should be able to achieve this when you install TMK firmware. You can get it here: https://github.com/xauser/tmk_keyboard/tree/xauser/keyboard/l3.

I am busy setting it up on my YAS62. It was difficult to set up, but most things work now. The only problem left for me is that I cannot stop the annoying RGB lights. Has anyone else tried TMK on their YAS62?

[ihalatch]

[Poesjuh]

Show Image

You seem to be missing some parts :P what case are you gonna use? SKB maybe? Black would look sick with those caps :O


Sent from my iPhone using Tapatalk

[ihalatch]

Show Image

You seem to be missing some parts :P what case are you gonna use? SKB maybe? Black would look sick with those caps :O


Sent from my iPhone using Tapatalk

I spent my entire yearly keyboard allowance on the JetFire and Xondat's 280 + 220 while waiting for the SKB. I'm waiting for the right time to beg the boss home to allow me to indulge myself once again with my first German custom keyboard :)

[112227]

What stabilizers are required for the plate? GMK screw-in won't fit.

[ihalatch]

They fit mine.

[112227]

Just soldered mine up. Every link I find is dead for JigOn, can anyone point me in the right direction?

[ihalatch]

how to bootload yes62?

[yasintahir]

how to bootload yes62?

Use jigon just click keyboard-connect

Just soldered mine up. Every link I find is dead for JigOn, can anyone point me in the right direction?

Try this http://kbdlab.co.kr/index.php?mid=board_sw&document_srl=2702787

Use jigon_170419.zip

[davisthegreat]

I am just now getting around to building my Yas62. My Plate is weird, it does'nt look like any of the plates im seeing or the on the yas62 case/ bag. I am having an issue with stabilizers. It looks like my plate only supports Plate mount stabs? Did i miss or forget something?

[Koriko]

The plate is a very tight fit around the stabilizers.

[yasintahir]

I am just now getting around to building my Yas62. My Plate is weird, it does'nt look like any of the plates im seeing or the on the yas62 case/ bag. I am having an issue with stabilizers. It looks like my plate only supports Plate mount stabs? Did i miss or forget something?

I guess you have plate with 6.25u stabilizer option. You need plate mount stab for that plate

[z28497952]

Excuse me, can I still buy yas62 PCB board now?

[ChitownM2]

Excuse me, can I still buy yas62 PCB board now?

only second hand. Pretty positive these are long gone.

[z28497952]

Excuse me, can I still buy yas62 PCB board now?

only second hand. Pretty positive these are long gone.

What a pity news...

[realxmlforce]

Another thing: Does anyone know if there is a QMK port for the YAS62 PCB? Or can someone tell if the effort necessary for doing a port is somewhat manageable? (Without cs degree)

[Poesjuh]

Excuse me, can I still buy yas62 PCB board now?

only second hand. Pretty positive these are long gone.

What a pity news...

Well, you could find 4 more people and get them made for you


Sent from my iPhone using Tapatalk

[mniels]

It has been a while since I have seen any posts about cases (never got around to building mine and considering it now.)  It looks like a standard 60% case will work, but what if you do not want to go with a standard layout?  I think that kbdfans had some a long time ago.....any ideas on current options?

[Poesjuh]

It has been a while since I have seen any posts about cases (never got around to building mine and considering it now.)  It looks like a standard 60% case will work, but what if you do not want to go with a standard layout?  I think that kbdfans had some a long time ago.....any ideas on current options?

Keep an eye out on Mechmarket for SKB cases, they have been shipped and there could be people selling theirs.




Sent from my iPhone using Tapatalk