It's in the mail...

[Steezus]

Show Image

Nice pick! I have the 60mm one and love it, hoping to see some quality pics soon. :thumb:

[CommonCurt]

Show Image

Nice pick! I have the 60mm one and love it, hoping to see some quality pics soon. :thumb:

Yeah, I've been wanting this one for a while now.  Can't wait to play around with  ;D

[demik]

hhkb type s(ucker)

thanks to usps, still this.

[CommonCurt]

hhkb type s(ucker)

thanks to usps, still this.

If/when I finally break down and buy a HHKB.  I think I will go straight for the type-S.

I like my FC660C, but the stabilized keys seem a little loud (I know I need to lube the wires).  Well, not that loud. But when all the other keys are so much quieter they stand out more.

[1deeg]

Carbon Black keyset, Deep Space modifiers, orange DSA spacebar on the way 

[DAVYtm]

Dyed HHKB mods

[OTD]

Got some zealios coming in the mail. It has been really difficult finding some for sale on reddit because there seems to be a sudden rush of people needing them and Zeal is out of stock.

[xondat]

Gold stabs from icey

[demik]

RTJ 1 and 2 vinyls

[Pestik]

Currently waiting on my Christmas self-present: a 55g Realforce 87U!

It's my first mech keyboard, so I'm pretty excited.

[bocahgundul]

Currently waiting on my Christmas self-present: a 55g Realforce 87U!

It's my first mech keyboard, so I'm pretty excited.

Hope you like the board bro 
get HHKB next 

[ramnes]

Currently waiting on my Christmas self-present: a 55g Realforce 87U!

It's my first mech keyboard, so I'm pretty excited.

Wow, very good for a first mech. 

[E3E]

Leading Edge DC-3014

Battlestation 10 black 60% wrist rest

APC TH-5539 w/ Hebrew caps

I think that's it for now. Super excited for the DC-3014, but it's going to need some TLC restoration before it's minty fresh again. I'm still getting used to my indoor retrobrighting setup, but I think it'll be fine. I just need to wash off the solution every so often as opposed to letting it sit and simply reappying over the original coat like I used to do. The intensity is way too strong with my setup to let it sit for too long.

APC caps are going on my FAME.

BS10 rest for my Hammer Alps Eagle

Gonna be out of town when most of this stuff gets here, but everything should be fine.

[bocahgundul]

Leading Edge DC-3014

Battlestation 10 black 60% wrist rest

APC TH-5539 w/ Hebrew caps

I think that's it for now. Super excited for the DC-3014, but it's going to need some TLC restoration before it's minty fresh again. I'm still getting used to my indoor retrobrighting setup, but I think it'll be fine. I just need to wash off the solution every so often as opposed to letting it sit and simply reappying over the original coat like I used to do. The intensity is way too strong with my setup to let it sit for too long.

APC caps are going on my FAME.

BS10 rest for my Hammer Alps Eagle

Gonna be out of town when most of this stuff gets here, but everything should be fine.

I'm so jelly

[OTD]

Currently waiting on my Christmas self-present: a 55g Realforce 87U!

It's my first mech keyboard, so I'm pretty excited.

congratulations. Nothing can compare to a 55g topper I think. im waiting till i have enough cash for a 55g rf to mod my hhkb.

[Waateva]

Leading Edge DC-3014

Battlestation 10 black 60% wrist rest

APC TH-5539 w/ Hebrew caps

I think that's it for now. Super excited for the DC-3014, but it's going to need some TLC restoration before it's minty fresh again. I'm still getting used to my indoor retrobrighting setup, but I think it'll be fine. I just need to wash off the solution every so often as opposed to letting it sit and simply reappying over the original coat like I used to do. The intensity is way too strong with my setup to let it sit for too long.

APC caps are going on my FAME.

BS10 rest for my Hammer Alps Eagle

Gonna be out of town when most of this stuff gets here, but everything should be fine.

Random question about all of the different keysets that I see around here with different legends: do people who get these legends actually use them or are they sort of a rarity thing?

[alienman82]

removed.

[appleonama]

Duck orion v2 and gon nerd TKL can't wait 

[alienman82]

removed.

[OTD]

zealios delayed by snowstom. maybe today

[alienman82]

removed.

[bocahgundul]

Currently waiting on my Christmas self-present: a 55g Realforce 87U!

It's my first mech keyboard, so I'm pretty excited.

congratulations. Nothing can compare to a 55g topper I think. im waiting till i have enough cash for a 55g rf to mod my hhkb.

If you like the heavier switch go mod the hhkb. 55g domes on hhkb is heavier than on the realforce. but I personally doesn't like the heavier domes on hhkb.

[Pestik]

Currently waiting on my Christmas self-present: a 55g Realforce 87U!

It's my first mech keyboard, so I'm pretty excited.

Hope you like the board bro 
get HHKB next 

Thanks! I was close to pulling the trigger on an HHKB instead, but decided to go with a Realforce because I wanted a multipurpose board that could be used for gaming. The HHKB form factor/layout just seems too limiting. Even a TKL board will take a while to get used to since I had a bunch of stuff mapped to the numpad.

[Floody]

Couple meowcaps should be making their way to me. Just got my shipping confirmation and they are only a few cities over

[pab]

My Realforce 87ub 55g is arriving tomorrow and I'm super excited to get my hands on my first Topre .

Also, my WhiteFox MX Blues in the True Fox layout... but that's still a long ways off.

[fanpeople]

A couple of hapsters to help turn my sadsters frown upside-down.

[rowdy]

Currently waiting on my Christmas self-present: a 55g Realforce 87U!

It's my first mech keyboard, so I'm pretty excited.

Hope you like the board bro 
get HHKB next 

Thanks! I was close to pulling the trigger on an HHKB instead, but decided to go with a Realforce because I wanted a multipurpose board that could be used for gaming. The HHKB form factor/layout just seems too limiting. Even a TKL board will take a while to get used to since I had a bunch of stuff mapped to the numpad.

You can use an HHKB for gaming - I do.  Unless you have heavy dependence on function keys and/or arrow keys, in which case having to press two keys to get one function would be slightly limiting.

For most of the old FPS I play HHKB is fine.

[Jnzy]

Bought a POK3R, waiting for it to arrive.

Mum called me 'absolutely stupid' for spending £100 on a keyboard but it's okay when my brother spends £100 on a fishing reel  )

[rowdy]

Bought a POK3R, waiting for it to arrive.

Mum called me 'absolutely stupid' for spending £100 on a keyboard but it's okay when my brother spends £100 on a fishing reel  )

But it's a keyboard that will last you for years, is customisable, is quiet or, depending on what switches you got, will bring back fond memories of rooms full of old typewriters.

It's a keyboard that will help you to avoid RSI.

[Jnzy]

Bought a POK3R, waiting for it to arrive.

Mum called me 'absolutely stupid' for spending £100 on a keyboard but it's okay when my brother spends £100 on a fishing reel  )

But it's a keyboard that will last you for years, is customisable, is quiet or, depending on what switches you got, will bring back fond memories of rooms full of old typewriters.

It's a keyboard that will help you to avoid RSI.

Right? I can't wait to get it man.

[Connly33]

I'm still just waiting on some pcb mount stabilizers and a PCB from taiwan.... i need to learn patience wen it comes to international shipping and the way a lot of couriers tracking systems are completely broken lol

[Sus]

Pok3r arriving here as well, two long weeks to go!

What would be the thread to ask about pok3r standard resistors? I absolutely, positively, want my pok3r to have red backlighting, but can't find the pre-soldered resistors' resistance anywhere.

[Jnzy]

Pok3r arriving here as well, two long weeks to go!

What would be the thread to ask about pok3r standard resistors? I absolutely, positively, want my pok3r to have red backlighting, but can't find the pre-soldered resistors' resistance anywhere.

What color you going for? What's your opinion on the white board?

[Sus]

I'm looking for red backlighting on a black keyboard. White pok3r just didn't seem right to me! The white case would look absolutely fantastic with blue lighting though.

I have the impression that the pcb was made to support bright lighting, so it'd work directly with green, blue, cyan and other blue'ish colors. Red, orange, yellow etc would need swapping the resistor, so I need to know the original resistor's ohm rating to get new ones.

[crj3012]

Waiting on some HKP red-black keys to arrive so I can throw them on my new HHKB. I think I am getting close to my end game keyboard.

[itzmeluigi]

Got a lot of Alps boards that are on the way (probably to much lol). Still plan on buying more if i can find a ABS M1 and Ducky 1008XM.  I'm going to paint one of the NTC boards matte black and get a sleeved non coiled cable for it, i wonder if theres a way to fit a 5pin to PS/2 to USB adapter inside the case

NTC KB-6251 Green linear Hua-Jie AK, plastic plate, German layout
NTC KB-6251EA SKCM White, steel plate
Datacomp DFK192 SKCM White, ISO German layout
Zenith Z-150 SKCL Green (my third one haha)

[Waateva]

Got a lot of Alps boards that are on the way (probably to much lol). Still plan on buying more if i can find a ABS M1 and Ducky 1008XM.  I'm going to paint one of the NTC boards matte black and get a sleeved non coiled cable for it, i wonder if theres a way to fit a 5pin to PS/2 to USB adapter inside the case

NTC KB-6251 Green linear Hua-Jie AK, plastic plate, German layout
NTC KB-6251EA SKCM White, steel plate
Datacomp DFK192 SKCM White, ISO German layout
Zenith Z-150 SKCL Green (my third one haha)

Damn, I sold an ABS M1 about a month ago.  Personally, I found that when typing it produced too much of an almost ringing or chiming sound but otherwise it was a nice board.

[itzmeluigi]

Got a lot of Alps boards that are on the way (probably to much lol). Still plan on buying more if i can find a ABS M1 and Ducky 1008XM.  I'm going to paint one of the NTC boards matte black and get a sleeved non coiled cable for it, i wonder if theres a way to fit a 5pin to PS/2 to USB adapter inside the case

NTC KB-6251 Green linear Hua-Jie AK, plastic plate, German layout
NTC KB-6251EA SKCM White, steel plate
Datacomp DFK192 SKCM White, ISO German layout
Zenith Z-150 SKCL Green (my third one haha)

Damn, I sold an ABS M1 about a month ago.  Personally, I found that when typing it produced too much of an almost ringing or chiming sound but otherwise it was a nice board.

Ah haha its been pretty difficult finding one, i PM'd someone a few days ago but they also sold theirs to someone else lol.  It was probably "ping" being produced when typing, although i personally dont mind ping, i think swapping out the switches would have lessened it.  Do you remember who you sold the ABS M1 to? Maybe they still have it  )

[Waateva]

Got a lot of Alps boards that are on the way (probably to much lol). Still plan on buying more if i can find a ABS M1 and Ducky 1008XM.  I'm going to paint one of the NTC boards matte black and get a sleeved non coiled cable for it, i wonder if theres a way to fit a 5pin to PS/2 to USB adapter inside the case

NTC KB-6251 Green linear Hua-Jie AK, plastic plate, German layout
NTC KB-6251EA SKCM White, steel plate
Datacomp DFK192 SKCM White, ISO German layout
Zenith Z-150 SKCL Green (my third one haha)

Damn, I sold an ABS M1 about a month ago.  Personally, I found that when typing it produced too much of an almost ringing or chiming sound but otherwise it was a nice board.

Ah haha its been pretty difficult finding one, i PM'd someone a few days ago but they also sold theirs to someone else lol.  It was probably "ping" being produced when typing, although i personally dont mind ping, i think swapping out the switches would have lessened it.  Do you remember who you sold the ABS M1 to? Maybe they still have it  )

I sold it over on reddit's /r/MechMarket to a user named Fauscailt so he may still have it.  Doesn't look like he has been too active recently in the last couple weeks over there though.

[itzmeluigi]

Got a lot of Alps boards that are on the way (probably to much lol). Still plan on buying more if i can find a ABS M1 and Ducky 1008XM.  I'm going to paint one of the NTC boards matte black and get a sleeved non coiled cable for it, i wonder if theres a way to fit a 5pin to PS/2 to USB adapter inside the case

NTC KB-6251 Green linear Hua-Jie AK, plastic plate, German layout
NTC KB-6251EA SKCM White, steel plate
Datacomp DFK192 SKCM White, ISO German layout
Zenith Z-150 SKCL Green (my third one haha)

Damn, I sold an ABS M1 about a month ago.  Personally, I found that when typing it produced too much of an almost ringing or chiming sound but otherwise it was a nice board.

Ah haha its been pretty difficult finding one, i PM'd someone a few days ago but they also sold theirs to someone else lol.  It was probably "ping" being produced when typing, although i personally dont mind ping, i think swapping out the switches would have lessened it.  Do you remember who you sold the ABS M1 to? Maybe they still have it  )

I sold it over on reddit's /r/MechMarket to a user named Fauscailt so he may still have it.  Doesn't look like he has been too active recently in the last couple weeks over there though.

Awesome thanks, just PM'd him Last online was 23 days ago so theres still hope 

[hwood34]

TGR

[bcredbottle]

Grumpkin, Lycan, and two Purrkeys. 

[xondat]

Gold stabs, gold springs, GMK CMYW; SOON WKL B.FACE RGB & my carbon fibre plate by JDcarpe from LeandreN's GB R3!

[Solo]

TGR

What color?

[dgneo]

Carbon

[hwood34]

TGR

What color?

titanium grey

[deductivemonkee]

60% Aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaalllllllllllpppppppppppppsssssssssssssssssssssss

[bcredbottle]

60% Aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaalllllllllllpppppppppppppsssssssssssssssssssssss

  Welcome back to the Alps fold!

[deductivemonkee]

60% Aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaalllllllllllpppppppppppppsssssssssssssssssssssss

  Welcome back to the Alps fold!

It's been painful after selling my Dell at101w to fund this. No alps for like 4 months. I had to resort to *shivers* mx blacks.

[Blaise170]

My SHARP X68000 just arrived in my city today. I'm flying out to a different continent tonight and won't be back for three weeks. )