Author Topic: [GB]TGR-910 - Completed  (Read 152597 times)

0 Members and 1 Guest are viewing this topic.

Offline smittysteve

  • Posts: 538
  • Location: Erie, CO
  • Tea > Coffee. Clack > Thwock.
Re: [GB]TGR-910 65%
« Reply #250 on: Sat, 07 January 2017, 12:24:28 »
psssssttt.. psssssttt.. along with TGR 910CE, yuktsi will also release TGR 911

Tantalizing. And TGR 911 ---> 75%?
yeah, some sort of 75%.  :rolleyes:

Oh dear. Yuktsi, it's a really good thing I like you. Because my wallet hates you. But I control that little smart alec wallet. So he will behave and open up to dump all contents your way should I draw in to the chance to do so.

Seriously though, this is exciting news. Can't wait to see the design you come up with. 

Offline DanB

  • Posts: 106
  • Location: Boston
Re: [GB]TGR-910 65%
« Reply #251 on: Sat, 07 January 2017, 12:57:37 »
Thank god it is a 75% as I won't be tempted to buy it.

PS Yuk Tsi, Could you please respond to my messages?
Kingsaver, Koala

Offline Saiph

  • Posts: 276
Re: [GB]TGR-910 65%
« Reply #252 on: Sat, 07 January 2017, 13:45:54 »
Oh man, I thought I would be done after 910, but there's no way I can resist another 75%.

Offline Sissy

  • Posts: 494
  • Location: Australia
Re: [GB]TGR-910 65%
« Reply #253 on: Sat, 07 January 2017, 20:47:28 »
75% is probably my least favorite layout. but I'm sure as hell it will look nice and tempt me

Offline poolside

  • Posts: 790
  • Location: On the deck
Re: [GB]TGR-910 65%
« Reply #254 on: Sun, 08 January 2017, 10:30:48 »
Good news. This is one more potential TGR board to pair up with the Tris.  :)

Offline BEEFshard

  • Posts: 1
Re: [GB]TGR-910 65%
« Reply #255 on: Wed, 11 January 2017, 08:01:18 »
Hey Yuktsi, did you get my message send 11/30 right after I paid? Just want to confirm that these changes were made:
1) Top case grey
2) Bottom case black
3) add diffuser
4) red aluminum plate

Thanks so much!

Offline trexous

  • Posts: 67
  • Location: Australia
  • ~.~
Re: [GB]TGR-910 65%
« Reply #256 on: Sat, 14 January 2017, 05:06:45 »
hey yuktski, do you have an ETA on 910-CE? i want to prepare my wallet for it :(

Offline WNovizar

  • Posts: 382
  • Location: Indonesia
Re: [GB]TGR-910 65%
« Reply #257 on: Sat, 14 January 2017, 05:38:29 »
AFAIK TGR911 is not 75%, its RS78 layout
I like mechanical keyboards

Offline lanyusea

  • Posts: 334
Re: [GB]TGR-910 65%
« Reply #258 on: Sat, 14 January 2017, 05:50:33 »
AFAIK TGR911 is not 75%, its RS78 layout
:thumb: :thumb: :thumb:
HHKB Type-s / 4x KMAC Happy / 3x Duck Viper v1 / 2x Duck Viper v2 / 4x Duck Viper Duck TCV3 / Red Scarf 77 / 2x Infinity 60 / 2x ALF HHKB / LZ-CE / FJELL / Canoe / Canoe PC / Canoe FE / ARES Prototype / 2x Ares / LC-CLSh / TX60 / YODA2 / E6-V2 / E6-V2 FE / CAMP LC60 / 2x EM 7 / 4x Leaf 60 / UHK / Project F / Polaris / 4x Duck Viper v3 / TX60 v2 / Thermal / Matrix Falcon / TX60 v3 / 2x TMO50 / 2x Dolice / Dolphin 65 / Dolphin 60 / Plenty of keycaps

Offline laughatpain

  • Posts: 132
  • Location: Bay Area, California
Re: [GB]TGR-910 65%
« Reply #259 on: Sat, 14 January 2017, 12:46:39 »
AFAIK TGR911 is not 75%, its RS78 layout

If this is true...  :eek: !!! I can finally another Mini layout besides my AMJ or the elusive KMAC Mini

Offline cmd

  • Posts: 305
Re: [GB]TGR-910 65%
« Reply #260 on: Thu, 19 January 2017, 08:27:23 »
hey yuktski, do you have an ETA on 910-CE? i want to prepare my wallet for it :(

2020

Offline -musubi

  • Posts: 579
  • Location: West Coast Best Coast (US)
  • Spam rice 'n eggs
Re: [GB]TGR-910 65%
« Reply #261 on: Fri, 20 January 2017, 17:15:58 »
Any updates to the current GB? Itching to start a new build  ;D

Offline Damonskv

  • Posts: 278
  • Location: Moscow, Russia
Re: [GB]TGR-910 65%
« Reply #262 on: Wed, 25 January 2017, 02:29:35 »
Any updates to the current GB? Itching to start a new build  ;D
Also want to know how it goes ;)

Offline yuktsi

  • * Maker
  • Thread Starter
  • Posts: 1176
  • Location: Malaysia
  • Colour my life with the chaos of trouble
Re: [GB]TGR-910 65%
« Reply #263 on: Wed, 25 January 2017, 06:11:53 »
Hello all, it has been awhile. I wanted to take some photos at the factory just now, but I ended up not going because of the traffic and rain =(
Basically the machining for top and bottom case is 90% done, left only 2-3 processes.

I will take some photos tmr morning at the factory, before the long Chinese New Year holidays. Cheers.

edit: 910CE GB is likely to be not happening. I will have a few units for sale after this GB, CE should be slightly cheaper.
« Last Edit: Wed, 25 January 2017, 06:15:21 by yuktsi »
email: yuktsi@ttggrr.cc

My collection

More
Poker 2 | LZ CE | Leopold FC700R | KMAC 1.2 | EXE | GON NS87 | GON Nerd TKL | Duck Poker | Duck Orion | Realforce 87u 55g | OTD 456GT | LZ B7 | OTD 360C | Ducky G2 Pro | Apple Extended | Apple M0116 | Apple M0116 | Cherry G80-1220HAD | Duck Octagon | HHKB Pro 2 | Duck Unicorn | LZ B8 | LZ RE | ENVKX | OTD 456GT | LZ FE | HHKB Type S | TX1800| Duck Orion V2 | LZ FE | KPad | KMAC Happy | ENVKX | LZ RV | KMAC 2 | Whale | Dolphin | EM7 | TGR Jane | VE.A | DK Saver | Matrix 10xv1.0 | Whale | HHKB BT | Dolphin v2 | EM7 v2 | SSK | SSK (Blue Label) | LZ SQ | Duck Octagon v2 | TX84 | GON Mobik | TX-CP | LZ Ergo2 | KMAC Happy HHKB | TGR 910 | TGR Tris | Matrix 8xv1.2 | KMAC Mini | Mira | Fjell | 356mini | Dolphin GH | EM7 GH | TARO EXENT | Masterkey Pro L Crysta l OTD Koala | Duck Viper | Keycult no.1 | 356mini | 356pad | Matrix 8xv2.0 | 420cl | Matrix 8xv1.0 | Whale Special | Poly Dolphin | Keycult No.2 | FMJ80 | Singa R2 | Whale Poly | 356cl | HBCP | Dolinger | Linger | FMJ80 | KFE

Offline Damonskv

  • Posts: 278
  • Location: Moscow, Russia
Re: [GB]TGR-910 65%
« Reply #264 on: Wed, 25 January 2017, 06:15:27 »
Hello all, it has been awhile. I wanted to take some photos at the factory just now, but I ended up not going because of the traffic and rain =(
Basically the machining for top and bottom case is 90% done, left only 2-3 processes.

I will take some photos tmr morning at the factory, before the long Chinese New Year holidays. Cheers.
Great news, thanks for updating

Offline yuktsi

  • * Maker
  • Thread Starter
  • Posts: 1176
  • Location: Malaysia
  • Colour my life with the chaos of trouble
Re: [GB]TGR-910 65%
« Reply #265 on: Wed, 25 January 2017, 06:17:47 »
AFAIK TGR911 is not 75%, its RS78 layout
not RS78 bro. Shhhhhh

email: yuktsi@ttggrr.cc

My collection

More
Poker 2 | LZ CE | Leopold FC700R | KMAC 1.2 | EXE | GON NS87 | GON Nerd TKL | Duck Poker | Duck Orion | Realforce 87u 55g | OTD 456GT | LZ B7 | OTD 360C | Ducky G2 Pro | Apple Extended | Apple M0116 | Apple M0116 | Cherry G80-1220HAD | Duck Octagon | HHKB Pro 2 | Duck Unicorn | LZ B8 | LZ RE | ENVKX | OTD 456GT | LZ FE | HHKB Type S | TX1800| Duck Orion V2 | LZ FE | KPad | KMAC Happy | ENVKX | LZ RV | KMAC 2 | Whale | Dolphin | EM7 | TGR Jane | VE.A | DK Saver | Matrix 10xv1.0 | Whale | HHKB BT | Dolphin v2 | EM7 v2 | SSK | SSK (Blue Label) | LZ SQ | Duck Octagon v2 | TX84 | GON Mobik | TX-CP | LZ Ergo2 | KMAC Happy HHKB | TGR 910 | TGR Tris | Matrix 8xv1.2 | KMAC Mini | Mira | Fjell | 356mini | Dolphin GH | EM7 GH | TARO EXENT | Masterkey Pro L Crysta l OTD Koala | Duck Viper | Keycult no.1 | 356mini | 356pad | Matrix 8xv2.0 | 420cl | Matrix 8xv1.0 | Whale Special | Poly Dolphin | Keycult No.2 | FMJ80 | Singa R2 | Whale Poly | 356cl | HBCP | Dolinger | Linger | FMJ80 | KFE

Offline ntw

  • Posts: 501
Re: [GB]TGR-910 65%
« Reply #266 on: Wed, 25 January 2017, 06:18:08 »
god bless we all. yuktsi updated after spending the whole evening drinking vodka with his new russian friends. not sure how sober yuktsi was when he updated this thread
Wishlist: Hungrkey, Creamsicle Skullthulhu, MDMAver Skullthulhu, Goo, Taka

Offline trexous

  • Posts: 67
  • Location: Australia
  • ~.~
Re: [GB]TGR-910 65%
« Reply #267 on: Wed, 25 January 2017, 06:18:27 »
Hello all, it has been awhile. I wanted to take some photos at the factory just now, but I ended up not going because of the traffic and rain =(
Basically the machining for top and bottom case is 90% done, left only 2-3 processes.

I will take some photos tmr morning at the factory, before the long Chinese New Year holidays. Cheers.

edit: 910CE GB is likely to be not happening. I will have a few units for sale after this GB, CE should be slightly cheaper.

how can we buy after this GB then :c really unfortunate that i missed the sale :(

Offline toxicdrift

  • Posts: 275
  • Location: India
Re: [GB]TGR-910 65%
« Reply #268 on: Wed, 25 January 2017, 06:20:12 »
Awesome news!!! Cant wait :)

Sent from my SM-G935F using Tapatalk

Realforce 87U

Offline PoisonKing

  • Posts: 94
  • Location: wkwk land
  • RIP wallet
Re: [GB]TGR-910 65%
« Reply #269 on: Wed, 25 January 2017, 06:22:08 »
AFAIK TGR911 is not 75%, its RS78 layout
not RS78 bro. Shhhhhh

Show Image

Hmmm... Should I wait? Or should I get RS78 that is currently running on Massdrop?

Offline kawasaki161

  • Posts: 1059
  • Location: Germany
Re: [GB]TGR-910 65%
« Reply #270 on: Wed, 25 January 2017, 06:22:43 »
edit: 910CE GB is likely to be not happening. I will have a few units for sale after this GB, CE should be slightly cheaper.

Wait what? Not happening soon or not happening at all? And what about the last part? I don't really understand.

I need one of the 910s or 910CE's or 910R2 or whatever 910 style thing you will make though. I don't mind waiting (even if it's one year or longer), but I'd love to get one (and I won't buy in the aftermarket for a markup).

Offline Blackhawk

  • Posts: 213
Re: [GB]TGR-910 65%
« Reply #271 on: Wed, 25 January 2017, 06:24:00 »
Hello all, it has been awhile. I wanted to take some photos at the factory just now, but I ended up not going because of the traffic and rain =(
Basically the machining for top and bottom case is 90% done, left only 2-3 processes.

I will take some photos tmr morning at the factory, before the long Chinese New Year holidays. Cheers.

edit: 910CE GB is likely to be not happening. I will have a few units for sale after this GB, CE should be slightly cheaper.

Thanks for the update! Any idea when you will start invoicing shipping?

Offline trexous

  • Posts: 67
  • Location: Australia
  • ~.~
Re: [GB]TGR-910 65%
« Reply #272 on: Wed, 25 January 2017, 06:24:23 »
edit: 910CE GB is likely to be not happening. I will have a few units for sale after this GB, CE should be slightly cheaper.

Wait what? Not happening soon or not happening at all? And what about the last part? I don't really understand.

I need one of the 910s or 910CE's or 910R2 or whatever 910 style thing you will make though. I don't mind waiting (even if it's one year or longer), but I'd love to get one (and I won't buy in the aftermarket for a markup).

on the same boat as you :(

Offline yuktsi

  • * Maker
  • Thread Starter
  • Posts: 1176
  • Location: Malaysia
  • Colour my life with the chaos of trouble
Re: [GB]TGR-910 65%
« Reply #273 on: Wed, 25 January 2017, 06:37:04 »
I've 5 units of CE made in order to meet the MOQ  for anodising. Will have these units for sale later.
As for another 910/65% GB, I am not sure if I am going to do it in near future.
I am sorry.
email: yuktsi@ttggrr.cc

My collection

More
Poker 2 | LZ CE | Leopold FC700R | KMAC 1.2 | EXE | GON NS87 | GON Nerd TKL | Duck Poker | Duck Orion | Realforce 87u 55g | OTD 456GT | LZ B7 | OTD 360C | Ducky G2 Pro | Apple Extended | Apple M0116 | Apple M0116 | Cherry G80-1220HAD | Duck Octagon | HHKB Pro 2 | Duck Unicorn | LZ B8 | LZ RE | ENVKX | OTD 456GT | LZ FE | HHKB Type S | TX1800| Duck Orion V2 | LZ FE | KPad | KMAC Happy | ENVKX | LZ RV | KMAC 2 | Whale | Dolphin | EM7 | TGR Jane | VE.A | DK Saver | Matrix 10xv1.0 | Whale | HHKB BT | Dolphin v2 | EM7 v2 | SSK | SSK (Blue Label) | LZ SQ | Duck Octagon v2 | TX84 | GON Mobik | TX-CP | LZ Ergo2 | KMAC Happy HHKB | TGR 910 | TGR Tris | Matrix 8xv1.2 | KMAC Mini | Mira | Fjell | 356mini | Dolphin GH | EM7 GH | TARO EXENT | Masterkey Pro L Crysta l OTD Koala | Duck Viper | Keycult no.1 | 356mini | 356pad | Matrix 8xv2.0 | 420cl | Matrix 8xv1.0 | Whale Special | Poly Dolphin | Keycult No.2 | FMJ80 | Singa R2 | Whale Poly | 356cl | HBCP | Dolinger | Linger | FMJ80 | KFE

Offline trexous

  • Posts: 67
  • Location: Australia
  • ~.~
Re: [GB]TGR-910 65%
« Reply #274 on: Wed, 25 January 2017, 06:40:53 »
I've 5 units of CE made in order to meet the MOQ  for anodising. Will have these units for sale later.
As for another 910/65% GB, I am not sure if I am going to do it in near future.
I am sorry.

can we have a preorder for those 5 units?  ;D

Offline Sissy

  • Posts: 494
  • Location: Australia
Re: [GB]TGR-910 65%
« Reply #275 on: Wed, 25 January 2017, 06:43:12 »
I've 5 units of CE made in order to meet the MOQ  for anodising. Will have these units for sale later.
As for another 910/65% GB, I am not sure if I am going to do it in near future.
I am sorry.
Oh nooo, sadness

Offline PoisonKing

  • Posts: 94
  • Location: wkwk land
  • RIP wallet
Re: [GB]TGR-910 65%
« Reply #276 on: Wed, 25 January 2017, 06:45:54 »
I've 5 units of CE made in order to meet the MOQ  for anodising. Will have these units for sale later.
As for another 910/65% GB, I am not sure if I am going to do it in near future.
I am sorry.
Only 5? 😵

Offline kawasaki161

  • Posts: 1059
  • Location: Germany
Re: [GB]TGR-910 65%
« Reply #277 on: Wed, 25 January 2017, 07:08:43 »
I've 5 units of CE made in order to meet the MOQ  for anodising. Will have these units for sale later.
As for another 910/65% GB, I am not sure if I am going to do it in near future.
I am sorry.

5? Uhm... ouch. I don't mind taking one off of you, but i guess the chances aren't in my favor with that limited quantity.

Offline Damonskv

  • Posts: 278
  • Location: Moscow, Russia
Re: [GB]TGR-910 65%
« Reply #278 on: Wed, 25 January 2017, 07:09:06 »
AFAIK TGR911 is not 75%, its RS78 layout
not RS78 bro. Shhhhhh

Show Image

Hmmm... Should I wait? Or should I get RS78 that is currently running on Massdrop?
Well, if you think that you can compare them, you should definitely choose rs78 ;)

Offline le_wraith

  • Posts: 112
  • Location: San Francisco
Re: [GB]TGR-910 65%
« Reply #279 on: Wed, 25 January 2017, 17:19:55 »
I've 5 units of CE made in order to meet the MOQ  for anodising. Will have these units for sale later.
As for another 910/65% GB, I am not sure if I am going to do it in near future.
I am sorry.

Can you give some preference to folks who did the numpad groupbuy with you recently? Was really hoping I could land a 910CE to match my numpad (which I think was black top and magenta bottom). 

Offline Jokrik

  • * Destiny Supporter
  • Posts: 3031
  • Location: Death Star
Re: [GB]TGR-910 65%
« Reply #280 on: Wed, 25 January 2017, 17:58:47 »
Hello all, it has been awhile. I wanted to take some photos at the factory just now, but I ended up not going because of the traffic and rain =(
Basically the machining for top and bottom case is 90% done, left only 2-3 processes.

I will take some photos tmr morning at the factory, before the long Chinese New Year holidays. Cheers.

edit: 910CE GB is likely to be not happening. I will have a few units for sale after this GB, CE should be slightly cheaper.

whip em to work faster
:D

good updates!
Quote
Women always figure out the truth. Always. - Han Solo

Offline lildragonbuns

  • Formerly ilovekeycaps
  • Posts: 109
  • Location: San Jose, California
Re: [GB]TGR-910 65%
« Reply #281 on: Wed, 25 January 2017, 21:01:27 »
I've 5 units of CE made in order to meet the MOQ  for anodising. Will have these units for sale later.
As for another 910/65% GB, I am not sure if I am going to do it in near future.
I am sorry.

Can you give some preference to folks who did the numpad groupbuy with you recently? Was really hoping I could land a 910CE to match my numpad (which I think was black top and magenta bottom).

Good chance preference will go to individuals in the waitlist? No idea what yuktsi has planned. MYSTERY

Offline byker

  • Literally Canada
  • ** Moderator Emeritus
  • Posts: 3136
  • Location: Gone fishin
Re: [GB]TGR-910 65%
« Reply #282 on: Wed, 25 January 2017, 21:18:38 »
Hello all, it has been awhile. I wanted to take some photos at the factory just now, but I ended up not going because of the traffic and rain =(
Basically the machining for top and bottom case is 90% done, left only 2-3 processes.

I will take some photos tmr morning at the factory, before the long Chinese New Year holidays. Cheers.

edit: 910CE GB is likely to be not happening. I will have a few units for sale after this GB, CE should be slightly cheaper.

whip em to work faster
:D

good updates!

hyped  :D

Offline Saiph

  • Posts: 276
Re: [GB]TGR-910 65%
« Reply #283 on: Wed, 25 January 2017, 21:27:14 »
Welp, time to hope I'm lucky  :D

Offline CMYK

  • Posts: 120
Re: [GB]TGR-910 65%
« Reply #284 on: Wed, 25 January 2017, 21:48:13 »
I hope it's a raffle. Then I would at least have a chance.

Offline smittysteve

  • Posts: 538
  • Location: Erie, CO
  • Tea > Coffee. Clack > Thwock.
Re: [GB]TGR-910 65%
« Reply #285 on: Wed, 25 January 2017, 22:05:06 »
This is a bit unfortunate to hear on the CE round... but you know, it makes me that much more stoked for you lucky mugs who got in. We knew this was a special beast when it went up and it just got even more special. I for one will never be able to buy every board that comes through (as much as I would love to do so... I do want to stay married) and knowing the 910 just went legend... it's pretty freaking cool. Double congrats to the 30 who will soon get to treasure this baby.  :thumb: :thumb:


Offline yuktsi

  • * Maker
  • Thread Starter
  • Posts: 1176
  • Location: Malaysia
  • Colour my life with the chaos of trouble
Re: [GB]TGR-910 65%
« Reply #286 on: Thu, 26 January 2017, 02:32:41 »
Managed to snap some progress pic today. Nothing much to show really.
Basically they are running the last process for the top and bottom case.
Next step would be anodizing the cases and milling the brass.


















email: yuktsi@ttggrr.cc

My collection

More
Poker 2 | LZ CE | Leopold FC700R | KMAC 1.2 | EXE | GON NS87 | GON Nerd TKL | Duck Poker | Duck Orion | Realforce 87u 55g | OTD 456GT | LZ B7 | OTD 360C | Ducky G2 Pro | Apple Extended | Apple M0116 | Apple M0116 | Cherry G80-1220HAD | Duck Octagon | HHKB Pro 2 | Duck Unicorn | LZ B8 | LZ RE | ENVKX | OTD 456GT | LZ FE | HHKB Type S | TX1800| Duck Orion V2 | LZ FE | KPad | KMAC Happy | ENVKX | LZ RV | KMAC 2 | Whale | Dolphin | EM7 | TGR Jane | VE.A | DK Saver | Matrix 10xv1.0 | Whale | HHKB BT | Dolphin v2 | EM7 v2 | SSK | SSK (Blue Label) | LZ SQ | Duck Octagon v2 | TX84 | GON Mobik | TX-CP | LZ Ergo2 | KMAC Happy HHKB | TGR 910 | TGR Tris | Matrix 8xv1.2 | KMAC Mini | Mira | Fjell | 356mini | Dolphin GH | EM7 GH | TARO EXENT | Masterkey Pro L Crysta l OTD Koala | Duck Viper | Keycult no.1 | 356mini | 356pad | Matrix 8xv2.0 | 420cl | Matrix 8xv1.0 | Whale Special | Poly Dolphin | Keycult No.2 | FMJ80 | Singa R2 | Whale Poly | 356cl | HBCP | Dolinger | Linger | FMJ80 | KFE

Offline onmybikedrunk

  • Posts: 236
  • Location: Portland, OR
    • Danny Woods - Industrial Designer
Re: [GB]TGR-910 65%
« Reply #287 on: Thu, 26 January 2017, 02:44:42 »
I've 5 units of CE made in order to meet the MOQ  for anodising. Will have these units for sale later.
As for another 910/65% GB, I am not sure if I am going to do it in near future.
I am sorry.
How/Where will it be announced when these special 5 go on sale?  Also, you should just raffle the current wait list on the spreadsheet for the last 5  :thumb:
« Last Edit: Thu, 26 January 2017, 02:46:38 by onmybikedrunk »

Offline Sissy

  • Posts: 494
  • Location: Australia
Re: [GB]TGR-910 65%
« Reply #288 on: Thu, 26 January 2017, 03:40:38 »
I've 5 units of CE made in order to meet the MOQ  for anodising. Will have these units for sale later.
As for another 910/65% GB, I am not sure if I am going to do it in near future.
I am sorry.
How/Where will it be announced when these special 5 go on sale?  Also, you should just raffle the current wait list on the spreadsheet for the last 5  :thumb:
I want to believe I still have a chance to get one.

Offline lildragonbuns

  • Formerly ilovekeycaps
  • Posts: 109
  • Location: San Jose, California
Re: [GB]TGR-910 65%
« Reply #289 on: Thu, 26 January 2017, 05:02:34 »
oooo yuktsi u got me so excited with the pictures  :D :D :D :D :D

Offline trexous

  • Posts: 67
  • Location: Australia
  • ~.~
Re: [GB]TGR-910 65%
« Reply #290 on: Thu, 26 January 2017, 05:08:47 »
I've 5 units of CE made in order to meet the MOQ  for anodising. Will have these units for sale later.
As for another 910/65% GB, I am not sure if I am going to do it in near future.
I am sorry.

Can you give some preference to folks who did the numpad groupbuy with you recently? Was really hoping I could land a 910CE to match my numpad (which I think was black top and magenta bottom). 

I've 5 units of CE made in order to meet the MOQ  for anodising. Will have these units for sale later.
As for another 910/65% GB, I am not sure if I am going to do it in near future.
I am sorry.
How/Where will it be announced when these special 5 go on sale?  Also, you should just raffle the current wait list on the spreadsheet for the last 5  :thumb:

Just make a raffle for everyone to make it fair :3

Offline yuktsi

  • * Maker
  • Thread Starter
  • Posts: 1176
  • Location: Malaysia
  • Colour my life with the chaos of trouble
Re: [GB]TGR-910 65%
« Reply #291 on: Thu, 26 January 2017, 07:48:33 »
I've 5 units of CE made in order to meet the MOQ  for anodising. Will have these units for sale later.
As for another 910/65% GB, I am not sure if I am going to do it in near future.
I am sorry.

Can you give some preference to folks who did the numpad groupbuy with you recently? Was really hoping I could land a 910CE to match my numpad (which I think was black top and magenta bottom). 

I've 5 units of CE made in order to meet the MOQ  for anodising. Will have these units for sale later.
As for another 910/65% GB, I am not sure if I am going to do it in near future.
I am sorry.
How/Where will it be announced when these special 5 go on sale?  Also, you should just raffle the current wait list on the spreadsheet for the last 5  :thumb:

Just make a raffle for everyone to make it fair :3
yeah, that's probably the best way.  hmmm
email: yuktsi@ttggrr.cc

My collection

More
Poker 2 | LZ CE | Leopold FC700R | KMAC 1.2 | EXE | GON NS87 | GON Nerd TKL | Duck Poker | Duck Orion | Realforce 87u 55g | OTD 456GT | LZ B7 | OTD 360C | Ducky G2 Pro | Apple Extended | Apple M0116 | Apple M0116 | Cherry G80-1220HAD | Duck Octagon | HHKB Pro 2 | Duck Unicorn | LZ B8 | LZ RE | ENVKX | OTD 456GT | LZ FE | HHKB Type S | TX1800| Duck Orion V2 | LZ FE | KPad | KMAC Happy | ENVKX | LZ RV | KMAC 2 | Whale | Dolphin | EM7 | TGR Jane | VE.A | DK Saver | Matrix 10xv1.0 | Whale | HHKB BT | Dolphin v2 | EM7 v2 | SSK | SSK (Blue Label) | LZ SQ | Duck Octagon v2 | TX84 | GON Mobik | TX-CP | LZ Ergo2 | KMAC Happy HHKB | TGR 910 | TGR Tris | Matrix 8xv1.2 | KMAC Mini | Mira | Fjell | 356mini | Dolphin GH | EM7 GH | TARO EXENT | Masterkey Pro L Crysta l OTD Koala | Duck Viper | Keycult no.1 | 356mini | 356pad | Matrix 8xv2.0 | 420cl | Matrix 8xv1.0 | Whale Special | Poly Dolphin | Keycult No.2 | FMJ80 | Singa R2 | Whale Poly | 356cl | HBCP | Dolinger | Linger | FMJ80 | KFE

Offline romevi

  • Formerly romevi
  • * Exalted Elder
  • Posts: 8941
  • Location: The Windy City
Re: [GB]TGR-910 65%
« Reply #292 on: Thu, 26 January 2017, 08:08:45 »
Managed to snap some progress pic today. Nothing much to show really.
Basically they are running the last process for the top and bottom case.
Next step would be anodizing the cases and milling the brass.

Show Image


Show Image


Show Image


Show Image


Show Image


Show Image


Show Image


Show Image


Show Image


I feel so dirty looking at these.

Offline Sissy

  • Posts: 494
  • Location: Australia
Re: [GB]TGR-910 65%
« Reply #293 on: Sat, 28 January 2017, 09:13:11 »
I've 5 units of CE made in order to meet the MOQ  for anodising. Will have these units for sale later.
As for another 910/65% GB, I am not sure if I am going to do it in near future.
I am sorry.

Can you give some preference to folks who did the numpad groupbuy with you recently? Was really hoping I could land a 910CE to match my numpad (which I think was black top and magenta bottom). 

I've 5 units of CE made in order to meet the MOQ  for anodising. Will have these units for sale later.
As for another 910/65% GB, I am not sure if I am going to do it in near future.
I am sorry.
How/Where will it be announced when these special 5 go on sale?  Also, you should just raffle the current wait list on the spreadsheet for the last 5  :thumb:

Just make a raffle for everyone to make it fair :3
I agree except only if I get one

Offline trexous

  • Posts: 67
  • Location: Australia
  • ~.~
Re: [GB]TGR-910 65%
« Reply #294 on: Sat, 28 January 2017, 10:32:48 »
I've 5 units of CE made in order to meet the MOQ  for anodising. Will have these units for sale later.
As for another 910/65% GB, I am not sure if I am going to do it in near future.
I am sorry.

Can you give some preference to folks who did the numpad groupbuy with you recently? Was really hoping I could land a 910CE to match my numpad (which I think was black top and magenta bottom). 

I've 5 units of CE made in order to meet the MOQ  for anodising. Will have these units for sale later.
As for another 910/65% GB, I am not sure if I am going to do it in near future.
I am sorry.
How/Where will it be announced when these special 5 go on sale?  Also, you should just raffle the current wait list on the spreadsheet for the last 5  :thumb:

Just make a raffle for everyone to make it fair :3
I agree except only if I get one

me too :3

Offline Jumie

  • Posts: 298
  • Location: Dangerously Beautiful
Re: [GB]TGR-910 65%
« Reply #295 on: Tue, 31 January 2017, 00:28:43 »
Hi Yuktsi, pm'ed you for possibilty to change color option. Hope it's not too late.

Offline Damonskv

  • Posts: 278
  • Location: Moscow, Russia
Re: [GB]TGR-910 65%
« Reply #296 on: Tue, 07 February 2017, 18:58:08 »
How about some news?

Offline lildragonbuns

  • Formerly ilovekeycaps
  • Posts: 109
  • Location: San Jose, California
Re: [GB]TGR-910 65%
« Reply #297 on: Tue, 07 February 2017, 19:56:08 »
How about some news?

Doubt there is any, didn't CNY just end and they were still in the process of machining?

Offline doostin

  • Posts: 30
Re: [GB]TGR-910 65%
« Reply #298 on: Mon, 13 February 2017, 16:09:32 »
Is 1.25/1.25/1.25/6.25/1.5/1 bottom row possible? Just want to know if I can fit a 1u Fn somewhere in there :)

Offline cmd

  • Posts: 305
Re: [GB]TGR-910 65%
« Reply #299 on: Tue, 14 February 2017, 11:07:28 »
Is 1.25/1.25/1.25/6.25/1.5/1 bottom row possible? Just want to know if I can fit a 1u Fn somewhere in there :)

http://i.imgur.com/egLkQZa.jpg