Author Topic: [GB] Pandora - The 1 Percent 60% - pearlboards.net - IN FULFILLMENT  (Read 61248 times)

0 Members and 1 Guest are viewing this topic.

Offline surreal19

  • Posts: 27
hey koob, in the first picture from the IC post is that space grey or a is that color not being released?

Offline Tyler

  • Posts: 26
  • hhkb >
Theres a Florida discord?  :eek:

Offline SampatBunny

  • Posts: 6
Can't wait.

Offline RexKorp

  • Posts: 27
  • Location: Sweden
I'm sure you will be able to get one Rex! Also I'm sorry about Sweden shipping that's rough x! And sure man. I guess I wouldn't mind doing that. But you'd need to message me a lot and be on top of me so I don't forget pleaseee!

Will do! :D

Offline zedbraxmen

  • Posts: 65
  • Sheesh
Hey Koob, i know this is a bit late in the game here, but could you take a photo of the space gray color? I think you showcased it in the type test video, but having a hard time imagining what it'll look like overall.
Thanks!


HHKB Kei | Constellation

Offline nathanchere

  • Posts: 706
Counting down the minutes now...

Offline SampatBunny

  • Posts: 6
Another 2 hours.

Offline lush_bunny

  • Posts: 797
  • Location: Philippines
  • TBR Prime | 7V | Pandora | Kaze

Offline Koobaczech

  • Thread Starter
  • Posts: 400
  • Location: Florida, USA
  • Don't forget to smile :)
    • Pearlboards
Morning everyone! Eta 30min!

This is the Space Gray, its one of my prototypes!

Offline ludd3

  • Posts: 23
  • Location: sweden
OOOFFF the 10u attack  :D

Offline xungc

  • Posts: 5
Getting nervous, hoping i can get a keyboard. Good luck everyone.  :D


Offline Diamagisk

  • Posts: 25
Trigger fingers ready

Offline nathanchere

  • Posts: 706
running late?

Offline ludd3

  • Posts: 23
  • Location: sweden
Green wkl with stainless steel here  :D

Offline nathanchere

  • Posts: 706
OK it worked now, order placed... but holy ****, $91 shipping to Australia too :/

Offline zedbraxmen

  • Posts: 65
  • Sheesh
Yay! Got one!


HHKB Kei | Constellation

Offline Diamagisk

  • Posts: 25
Secured, nice! Space Gray WKL with Stainless steel!

Offline zedbraxmen

  • Posts: 65
  • Sheesh
OK it worked now, order placed... but holy ****, $91 shipping to Australia too :/

Me too m8, me too to SEA.


HHKB Kei | Constellation

Offline beerafffe1

  • Posts: 92
$43 FL tax lol. Maybe I can just drive to Koob and pick up the board when ready :blank:

Offline YoungTerror

  • Posts: 28
Yeah i got $33 in shipping and i live in florida  :eek:

Offline beekey

  • Posts: 434
So happy I got one.  :D :thumb:

Offline Little4Real

  • Posts: 174
I ended up securing an E-white standard layout with SS accents/weight, and the shipping was insane for me as well. I live in the USA and it was still $43  :eek:

Offline jayiskuhl

  • Posts: 53
Got the SE :) so stoked!
Rukia (?) | gaff. 60 | Pandora | Praxis | Bauer 2

Offline Axariel

  • Posts: 26
Got in for the mix n match. Will we get a survey to make our choices? And is there a deadline for buying extras?

Offline RexKorp

  • Posts: 27
  • Location: Sweden
Anyone else getting Card was declined?
Card works fine (made another purchase like an hour ago)

Offline foo4542

  • Posts: 22
  • Location: Earth
Anyone else getting Card was declined?
Card works fine (made another purchase like an hour ago)
Same issue here. I got 2 Mastercard - one worked, one didn't. Not sure if it's my end or Shopify end.

Offline RexKorp

  • Posts: 27
  • Location: Sweden
Anyone else getting Card was declined?
Card works fine (made another purchase like an hour ago)
Same issue here. I got 2 Mastercard - one worked, one didn't. Not sure if it's my end or Shopify end.

Damn it, only have the one card :S

Offline youngbaby

  • Posts: 6
I ended up securing an E-white standard layout with SS accents/weight, and the shipping was insane for me as well. I live in the USA and it was still $43  :eek:

Isn't this a typical shipping cost for an insured 10lb box? I just sent something a couple weeks ago of a similar weight and it cost about that much.

Anyways I got a SE, stoked.

Offline mudfins

  • Posts: 6
  • Location: Hong Kong/Chicago
PC Card declined but Apple Pay worked. But kinda want a blank or custom badge now


Sent from my iPhone using Tapatalk

Offline Koobaczech

  • Thread Starter
  • Posts: 400
  • Location: Florida, USA
  • Don't forget to smile :)
    • Pearlboards
I think you guys stressed out Shopify! Its so slow!!

Offline surreal19

  • Posts: 27
if your card is declining you must use a different email address

Offline FionaC

  • Posts: 7
One extra PCB and one extra plate also cost $77.91 to ship to Asia....
I know Koob mentioned that you could combine orders with a fee, may I know how much would that fee be?
If it's just a small amount I would like to order extra but if it's a significant amount I will pass

Offline OKFNJesse

  • Posts: 2
  • Location: New York, NY
Picked up a WKL White with Brass.  Beyond stoked to build this out

Offline Koobaczech

  • Thread Starter
  • Posts: 400
  • Location: Florida, USA
  • Don't forget to smile :)
    • Pearlboards
I can combine orders, ill just take a few dollars. Whatever the refund is worth!

Offline thatsadmummy

  • Posts: 13
PM'd because I selected the wrong top in my morning rush  :-[  If it's easier since the buy is still going happy to place a second order and eat the cost of the partial refund on the first one

Offline iArson

  • Posts: 434
  • Location: United States
I got in an order for party paint. Didn't verify shipping information but it's incorrect. How can I change that down the line?

Should have asked this prior but is there a risk of the paint chipping after the fact?

Sent from my SM-N976V using Tapatalk


Offline KingsofLeon

  • Posts: 8
  • Location: Singapore
Party paint no longer available? I still see it as coming soon.

Offline Drakenocas

  • Posts: 65
Anyone else getting Card was declined?
Card works fine (made another purchase like an hour ago)
Same issue here. I got 2 Mastercard - one worked, one didn't. Not sure if it's my end or Shopify end.

Anyone else getting Card was declined?
Card works fine (made another purchase like an hour ago)

PC Card declined but Apple Pay worked. But kinda want a blank or custom badge now


Sent from my iPhone using Tapatalk

Y'all probably have a daily cap on your debit/credit cards.  You can get rid of that issue by calling your bank and having it increased.  Most banks keep it to 750-1,500 a day cause of thieves.

Offline Koobaczech

  • Thread Starter
  • Posts: 400
  • Location: Florida, USA
  • Don't forget to smile :)
    • Pearlboards
Any floridian purchasers please PM me! We can work something out :)

Offline zedbraxmen

  • Posts: 65
  • Sheesh
Hey Koob, I'm not very well educated with shipping cost at all because they vary so much. Can you help me understand why it costs 90 dollars?
Not complaining, just genuinely curious. Thanks!

Really excited for my board!


HHKB Kei | Constellation

Offline mudfins

  • Posts: 6
  • Location: Hong Kong/Chicago
Rip forgot to specify if ANSI or ISO

Offline FionaC

  • Posts: 7
I can combine orders, ill just take a few dollars. Whatever the refund is worth!
Great! Ordered and dropped you a message so you could process it in your own time :)

Offline zedbraxmen

  • Posts: 65
  • Sheesh
Rip forgot to specify if ANSI or ISO

The soldered (default) PCB should support it, no?


HHKB Kei | Constellation

Offline mudfins

  • Posts: 6
  • Location: Hong Kong/Chicago
Rip forgot to specify if ANSI or ISO

The soldered (default) PCB should support it, no?

I hope its ANSI lol

Offline ninjacore

  • Posts: 329
Hey fellas! Couple of things. If you are more comfortable buying a kit first and then adding the stuff second, be my guest. But it will make it very hard for me to organize orders that way!

Sites been taking a tiny amount of orders for friends and family ~10. Shopify has a reserve feature but apparently it doesn't work if you can check out. But I password protected the site for now lol.

As for shipping, imagine an 8lb large box, and then tack on insurance up to $800 for each order. It adds up a lot.

I'll add more info soon tonight, thank you all!

Hey Koob, I'm not very well educated with shipping cost at all because they vary so much. Can you help me understand why it costs 90 dollars?
Not complaining, just genuinely curious. Thanks!

Really excited for my board!

Offline zedbraxmen

  • Posts: 65
  • Sheesh
Rip forgot to specify if ANSI or ISO

The soldered (default) PCB should support it, no?

I hope its ANSI lol

I just checked the product page, it supports both layouts.


HHKB Kei | Constellation

Offline zedbraxmen

  • Posts: 65
  • Sheesh
Hey fellas! Couple of things. If you are more comfortable buying a kit first and then adding the stuff second, be my guest. But it will make it very hard for me to organize orders that way!

Sites been taking a tiny amount of orders for friends and family ~10. Shopify has a reserve feature but apparently it doesn't work if you can check out. But I password protected the site for now lol.

As for shipping, imagine an 8lb large box, and then tack on insurance up to $800 for each order. It adds up a lot.

I'll add more info soon tonight, thank you all!

Hey Koob, I'm not very well educated with shipping cost at all because they vary so much. Can you help me understand why it costs 90 dollars?
Not complaining, just genuinely curious. Thanks!

Really excited for my board!

Thanks for the clarification, i totally missed that message.


HHKB Kei | Constellation

Offline ninjacore

  • Posts: 329
No problem. $80-90 for something this size with insurance is pretty good. Same for $33 in the US. Insurance is pretty expensive

Offline mudfins

  • Posts: 6
  • Location: Hong Kong/Chicago
Rip forgot to specify if ANSI or ISO

The soldered (default) PCB should support it, no?

I hope its ANSI lol

I just checked the product page, it supports both layouts.

Fairly sure its either a ISO or ANSI PCB. Only noticed this when I was going to buy an extra PCB to store