Author Topic: [IC] Modern M0110  (Read 138134 times)

0 Members and 1 Guest are viewing this topic.

Offline dead_pixel_design

  • Posts: 623
  • Location: Portland, OR
  • IIIV is not a Roman Numeral. Positive Vibes.
Re: [IC] Modern M0110
« Reply #100 on: Sat, 18 November 2017, 18:30:34 »
Interested in seeing more about this. Polished brass plate?

Offline Zobeid Zuma

  • Posts: 262
  • Location: Texas
Re: [IC] Modern M0110
« Reply #101 on: Sun, 19 November 2017, 08:28:32 »
The very simple reason is economics. Each set of injection mould dies cost a few tens of thousands of dollars to make, when you factor in the cost of design and test, it can easily get into the 6 figure range.

Incidentally, this is also why it's hard to get eccentric keycaps, like 2.25u and 2.75u convex spacebars.  Nobody wants to spend a fortune on the tooling.

The good news is, 3D printing technology is advancing fast.  It may not be quite "there" yet for every application, but it's getting there.


Offline sK0pe

  • Posts: 14
  • Location: Australia
Re: [IC] Modern M0110
« Reply #102 on: Sun, 19 November 2017, 08:48:22 »
Obviously also interested in this.  Hopefully if it's big enough shipping won't be more than the case itself lol!  :p

Offline chicagoboss25

  • Posts: 65
  • Location: SoCal
  • deskcandy.xyz | reddit.com/u/heroyjenkins
    • Desk Candy
Re: [IC] Modern M0110
« Reply #103 on: Sun, 19 November 2017, 16:44:37 »
Hey folks, v1 prototype pics are in!

Check out the pics over at deskcandy.xyz.

There are a couple of minor manufacturing issues with respect to banding on the top chamfers and some improvements we'd like to make to the USB port, but anodizing turned out really well on the first pass. We are ordering a couple more prototypes to test (stay tuned for a beige cerakote proto :D ) and a more detailed IC form so we can hone in on contents and options for the GB kit.

Offline spiritjeon

  • Posts: 25
Re: [IC] Modern M0110
« Reply #104 on: Sun, 19 November 2017, 16:47:57 »
Hey folks, v1 prototype pics are in!

Check out the pics over at deskcandy.xyz.

There are a couple of minor manufacturing issues with respect to banding on the top chamfers and some improvements we'd like to make to the USB port, but anodizing turned out really well on the first pass. We are ordering a couple more prototypes to test (stay tuned for a beige cerakote proto :D ) and a more detailed IC form so we can hone in on contents and options for the GB kit.
OMG! Sooooo sweet! Leave one for me!

Offline dead_pixel_design

  • Posts: 623
  • Location: Portland, OR
  • IIIV is not a Roman Numeral. Positive Vibes.
Re: [IC] Modern M0110
« Reply #105 on: Sun, 19 November 2017, 16:48:26 »
Very nice looking prototype. Excited to see more.

Was the original Apple board that angled? I guess I haven't actually seen one since I was little.

Offline chicagoboss25

  • Posts: 65
  • Location: SoCal
  • deskcandy.xyz | reddit.com/u/heroyjenkins
    • Desk Candy
Re: [IC] Modern M0110
« Reply #106 on: Sun, 19 November 2017, 16:57:51 »
Very nice looking prototype. Excited to see more.

Was the original Apple board that angled? I guess I haven't actually seen one since I was little.

We are rocking a 7 degree angle versus the original which I believe came in around 15 degrees. So while we are trying to stay true to the original Apple design, we are also trying to make subtle improvements like with the angle. Should be more comfortable than the original and would probably recommend Cherry profile or DCS keycaps though you can always go crazy with SA profile too. :D

Offline dead_pixel_design

  • Posts: 623
  • Location: Portland, OR
  • IIIV is not a Roman Numeral. Positive Vibes.
Re: [IC] Modern M0110
« Reply #107 on: Sun, 19 November 2017, 17:03:23 »
Great answer, thank you!

I'm hoping to get one as a gift for my father who taught me how use a computer on an old Mac so I'm probably not going to go too crazy on the keycaps.

Offline Darknight00z

  • Posts: 644
  • Location: UK
Re: [IC] Modern M0110
« Reply #108 on: Sun, 19 November 2017, 17:59:12 »
Just going to leave this here, incase anybody missed the reddit post.

https://www.deskcandy.xyz/modern-m0110/

Gosh the prototype look stunning!!

Offline pixelpusher

  • * Elevated Elder
  • Posts: 4177
  • Location: Tennessee - USA
Re: [IC] Modern M0110
« Reply #109 on: Sun, 19 November 2017, 22:58:05 »
Just going to leave this here, incase anybody missed the reddit post.

https://www.deskcandy.xyz/modern-m0110/

Gosh the prototype look stunning!!

It looks really nice.  Although, I do wish the plate was sunken down about 1-2mm more than it currently sits.  Still a very nice case though.

Offline kenlee

  • Posts: 211
  • Location: Taiwan
Re: [IC] Modern M0110
« Reply #110 on: Mon, 20 November 2017, 00:11:28 »
Hey folks, v1 prototype pics are in!

Check out the pics over at deskcandy.xyz.

There are a couple of minor manufacturing issues with respect to banding on the top chamfers and some improvements we'd like to make to the USB port, but anodizing turned out really well on the first pass. We are ordering a couple more prototypes to test (stay tuned for a beige cerakote proto :D ) and a more detailed IC form so we can hone in on contents and options for the GB kit.

Looks NICE

What's height of the front case?

Offline nguyenhimself

  • Posts: 672
Re: [IC] Modern M0110
« Reply #111 on: Mon, 20 November 2017, 00:38:03 »
Any estimated timeline yet? With the Norbauer Realforce case coming soon-ish, I'm not sure I can budget for both in the same month  :-X

Offline chicagoboss25

  • Posts: 65
  • Location: SoCal
  • deskcandy.xyz | reddit.com/u/heroyjenkins
    • Desk Candy
Re: [IC] Modern M0110
« Reply #112 on: Mon, 20 November 2017, 01:11:21 »
Hey folks, v1 prototype pics are in!

Check out the pics over at deskcandy.xyz.

There are a couple of minor manufacturing issues with respect to banding on the top chamfers and some improvements we'd like to make to the USB port, but anodizing turned out really well on the first pass. We are ordering a couple more prototypes to test (stay tuned for a beige cerakote proto :D ) and a more detailed IC form so we can hone in on contents and options for the GB kit.

Looks NICE

What's height of the front case?

Height to the front edge of the case is approx. 1", though that doesn't account for the bezel/chamfer which rises up a bit more before hitting the bottom of the bottom row keycaps. That looks closer to 1 3/8". Not unreasonably high for daily typing IMO but I personally probably wouldn't use it without a wrist rest (though I use a wrist rest with all mechanical keyboards).

Offline chicagoboss25

  • Posts: 65
  • Location: SoCal
  • deskcandy.xyz | reddit.com/u/heroyjenkins
    • Desk Candy
Re: [IC] Modern M0110
« Reply #113 on: Mon, 20 November 2017, 01:14:47 »
Any estimated timeline yet? With the Norbauer Realforce case coming soon-ish, I'm not sure I can budget for both in the same month  :-X

If I had to guess, we'll be able to launch the GB early Q1. Given that we're doing another round of prototypes and testing a new finish (cerakote), I don't want to promise that this is going to drop before Xmas.

Offline heliar_mk

  • Posts: 77
Re: [IC] Modern M0110
« Reply #114 on: Tue, 21 November 2017, 03:32:24 »
Anything news?

Offline Mechboards

  • * Vendor
  • Posts: 293
  • Location: UK
  • Mechboards UK
    • Mechboards
Re: [IC] Modern M0110
« Reply #115 on: Tue, 21 November 2017, 04:33:21 »
Hey man, this looks good!

Offline schmoktopus

  • Posts: 75
Re: [IC] Modern M0110
« Reply #116 on: Tue, 21 November 2017, 09:26:27 »
What is the cerakote finish going to look like? Is it supposed to mimic the original m0110?

Offline Darknight00z

  • Posts: 644
  • Location: UK
Re: [IC] Modern M0110
« Reply #117 on: Wed, 22 November 2017, 09:53:33 »
Would we be stepping on Apple's toes if we added their logo on the bottom right like the original m0110

If possible something like a brass logo like the CA66 would be amazing

« Last Edit: Wed, 22 November 2017, 11:59:33 by Darknight00z »

Offline Marutks

  • Posts: 310
  • Location: London
Re: [IC] Modern M0110
« Reply #118 on: Wed, 22 November 2017, 10:34:02 »
prototype looks awesome.    I am interested in black or navy blue case.

Offline clickstops

  • Posts: 51
Re: [IC] Modern M0110
« Reply #119 on: Wed, 22 November 2017, 11:07:23 »
I take it you have nothing to do with the Massdrop render that popped up today on the Tai Hao group buy?

https://www.massdrop.com/buy/jukebox-tai-hao-cubic?mode=guest_open

Looks like Red Scarf is doing it? Yikes.

Offline janglad

  • * Vendor
  • Thread Starter
  • Posts: 632
  • Location: Belgium
  • qoda.studio
    • Clavier.xyz
Re: [IC] Modern M0110
« Reply #120 on: Wed, 22 November 2017, 11:41:43 »
I take it you have nothing to do with the Massdrop render that popped up today on the Tai Hao group buy?

https://www.massdrop.com/buy/jukebox-tai-hao-cubic?mode=guest_open

Looks like Red Scarf is doing it? Yikes.

I don't indeed :|

As for this project, we're in talks with the original manufacturer and are trying to see if they can fix the issues we had with the proto instead of switches factories (since their price, anodising and overall quality apart from the issues was quite nice).

Offline ptiede

  • Posts: 267
Re: [IC] Modern M0110
« Reply #121 on: Wed, 22 November 2017, 11:57:31 »
I take it you have nothing to do with the Massdrop render that popped up today on the Tai Hao group buy?

https://www.massdrop.com/buy/jukebox-tai-hao-cubic?mode=guest_open

Looks like Red Scarf is doing it? Yikes.

I don't indeed :|

As for this project, we're in talks with the original manufacturer and are trying to see if they can fix the issues we had with the proto instead of switches factories (since their price, anodising and overall quality apart from the issues was quite nice).

Ya it is ****ty since now massdrop and redscarf look like they are part of it. Kinda ****ty for the community.

Offline gok_nz

  • Posts: 708
  • Location: NZ
  • Enjoy your PBT
    • Website
Re: [IC] Modern M0110
« Reply #122 on: Wed, 22 November 2017, 16:01:40 »
I take it you have nothing to do with the Massdrop render that popped up today on the Tai Hao group buy?

https://www.massdrop.com/buy/jukebox-tai-hao-cubic?mode=guest_open

Looks like Red Scarf is doing it? Yikes.

I don't indeed :|

As for this project, we're in talks with the original manufacturer and are trying to see if they can fix the issues we had with the proto instead of switches factories (since their price, anodising and overall quality apart from the issues was quite nice).

Ya it is ****ty since now massdrop and redscarf look like they are part of it. Kinda ****ty for the community.
Something to consider is that Redscarf may have already been working in their project before news about the Modern M0110 was released.
I'm in the same situation where I have been working on a case that closely resembles the CU-75 that's also on GH but I had already been in talks with vendors to move it onto production documentation stage before it was posted to the IC forum. The lucky thing for me is that I'm doing a 60% case and CAPSUNLOCKED's is a 75%.

Offline dead_pixel_design

  • Posts: 623
  • Location: Portland, OR
  • IIIV is not a Roman Numeral. Positive Vibes.
Re: [IC] Modern M0110
« Reply #123 on: Wed, 22 November 2017, 17:43:38 »
+1 for a logo where the apple would be on the original

Offline jnav

  • Posts: 66
  • Location: California
  • Endgame is for quitters.
    • Macclack
Re: [IC] Modern M0110
« Reply #124 on: Wed, 22 November 2017, 21:50:10 »
I know it's not true to the original but a non-HHKB layout option would be amazing. 

Offline dead_pixel_design

  • Posts: 623
  • Location: Portland, OR
  • IIIV is not a Roman Numeral. Positive Vibes.
Re: [IC] Modern M0110
« Reply #125 on: Wed, 22 November 2017, 23:47:52 »
Here's more info on the Red Scarf project: https://www.chiphell.com/thread-1776866-1-1.html

Offline Perfex

  • Posts: 124
  • Location: MN
Re: [IC] Modern M0110
« Reply #126 on: Wed, 22 November 2017, 23:54:48 »
+1 for a logo where the apple would be on the original


Maybe this ?

Offline dead_pixel_design

  • Posts: 623
  • Location: Portland, OR
  • IIIV is not a Roman Numeral. Positive Vibes.
Re: [IC] Modern M0110
« Reply #127 on: Wed, 22 November 2017, 23:58:48 »

Offline lanyusea

  • Posts: 334
Re: [IC] Modern M0110
« Reply #128 on: Wed, 22 November 2017, 23:59:29 »
Here's more info on the Red Scarf project: https://www.chiphell.com/thread-1776866-1-1.html

seems the prototype of RS MX0110 is out in Sep, which is months earlier than this IC thread...
HHKB Type-s / 4x KMAC Happy / 3x Duck Viper v1 / 2x Duck Viper v2 / 4x Duck Viper Duck TCV3 / Red Scarf 77 / 2x Infinity 60 / 2x ALF HHKB / LZ-CE / FJELL / Canoe / Canoe PC / Canoe FE / ARES Prototype / 2x Ares / LC-CLSh / TX60 / YODA2 / E6-V2 / E6-V2 FE / CAMP LC60 / 2x EM 7 / 4x Leaf 60 / UHK / Project F / Polaris / 4x Duck Viper v3 / TX60 v2 / Thermal / Matrix Falcon / TX60 v3 / 2x TMO50 / 2x Dolice / Dolphin 65 / Dolphin 60 / Plenty of keycaps

Offline typischt

  • Posts: 290
Re: [IC] Modern M0110
« Reply #129 on: Thu, 23 November 2017, 03:08:27 »
Here's more info on the Red Scarf project: https://www.chiphell.com/thread-1776866-1-1.html

seems the prototype of RS MX0110 is out in Sep, which is months earlier than this IC thread...
Looks like the Modern M0110 has a bit more bezel then the one from Chiphell. For me, the Modern looks cooler, though the might be similar..

Offline Vigrith

  • Posts: 1843
Re: [IC] Modern M0110
« Reply #130 on: Thu, 23 November 2017, 07:50:56 »
Here's more info on the Red Scarf project: https://www.chiphell.com/thread-1776866-1-1.html

seems the prototype of RS MX0110 is out in Sep, which is months earlier than this IC thread...

Jenkins has had "ask me about the Modern M0110" as his reddit tag for like 6 months now so I'd say it's a little harder to gauge who the chicken and who the egg is in this situation - I personally am not bothered by it, this project looks nice and it's going to have an EU proxy, that's enough for me.

Offline Darknight00z

  • Posts: 644
  • Location: UK
Re: [IC] Modern M0110
« Reply #131 on: Thu, 23 November 2017, 08:28:54 »
Here's more info on the Red Scarf project: https://www.chiphell.com/thread-1776866-1-1.html

seems the prototype of RS MX0110 is out in Sep, which is months earlier than this IC thread...

Jenkins has had "ask me about the Modern M0110" as his reddit tag for like 6 months now so I'd say it's a little harder to gauge who the chicken and who the egg is in this situation - I personally am not bothered by it, this project looks nice and it's going to have an EU proxy, that's enough for me.

Amen on the Eu proxy, as well as not being done through MD. And the stellar red scarf support, if their other boards are to go by. /s

Offline lanyusea

  • Posts: 334
Re: [IC] Modern M0110
« Reply #132 on: Thu, 23 November 2017, 08:38:05 »
Here's more info on the Red Scarf project: https://www.chiphell.com/thread-1776866-1-1.html

seems the prototype of RS MX0110 is out in Sep, which is months earlier than this IC thread...

Jenkins has had "ask me about the Modern M0110" as his reddit tag for like 6 months now so I'd say it's a little harder to gauge who the chicken and who the egg is in this situation - I personally am not bothered by it, this project looks nice and it's going to have an EU proxy, that's enough for me.

they are all eggs. Apple is the chicken :p
HHKB Type-s / 4x KMAC Happy / 3x Duck Viper v1 / 2x Duck Viper v2 / 4x Duck Viper Duck TCV3 / Red Scarf 77 / 2x Infinity 60 / 2x ALF HHKB / LZ-CE / FJELL / Canoe / Canoe PC / Canoe FE / ARES Prototype / 2x Ares / LC-CLSh / TX60 / YODA2 / E6-V2 / E6-V2 FE / CAMP LC60 / 2x EM 7 / 4x Leaf 60 / UHK / Project F / Polaris / 4x Duck Viper v3 / TX60 v2 / Thermal / Matrix Falcon / TX60 v3 / 2x TMO50 / 2x Dolice / Dolphin 65 / Dolphin 60 / Plenty of keycaps

Offline ideus

  • * Exalted Elder
  • Posts: 8123
  • Location: In the middle of nowhere.
  • Björkö.
Re: [IC] Modern M0110
« Reply #133 on: Thu, 23 November 2017, 08:58:35 »
I know it's not true to the original but a non-HHKB layout option would be amazing.

There are some other projects that target a non-HHKB layout, if what you mean is that they do not feature the corner blockers at the bottom.

Offline dead_pixel_design

  • Posts: 623
  • Location: Portland, OR
  • IIIV is not a Roman Numeral. Positive Vibes.
Re: [IC] Modern M0110
« Reply #134 on: Thu, 23 November 2017, 16:28:01 »
I'm excited to see two different interpretations of this

Offline chuckdee

  • * Destiny Supporter
  • Posts: 1308
Re: [IC] Modern M0110
« Reply #135 on: Thu, 23 November 2017, 17:51:58 »
I'm excited to see two different interpretations of this

Agreed.  Having two different choices is pretty cool!

Offline satricion

  • Posts: 25
Re: [IC] Modern M0110
« Reply #136 on: Thu, 23 November 2017, 22:24:27 »
Here's more info on the Red Scarf project: https://www.chiphell.com/thread-1776866-1-1.html

seems the prototype of RS MX0110 is out in Sep, which is months earlier than this IC thread...
Looks like the Modern M0110 has a bit more bezel then the one from Chiphell. For me, the Modern looks cooler, though the might be similar..

I like them both but the one from Chiphell looks like it could be slightly more ergonomic? Do we know anything about this other board?

Offline ptiede

  • Posts: 267
Re: [IC] Modern M0110
« Reply #137 on: Thu, 23 November 2017, 22:36:03 »
Here's more info on the Red Scarf project: https://www.chiphell.com/thread-1776866-1-1.html

seems the prototype of RS MX0110 is out in Sep, which is months earlier than this IC thread...
Looks like the Modern M0110 has a bit more bezel then the one from Chiphell. For me, the Modern looks cooler, though the might be similar..

I like them both but the one from Chiphell looks like it could be slightly more ergonomic? Do we know anything about this other board?

I'm not sure. In the pictures it looks like the incline on chiphell is equal to the original which I believe >10 degrees which isn't ergonomic at all. Either way I not sure which is more ergo friendly...

Offline lanyusea

  • Posts: 334
Re: [IC] Modern M0110
« Reply #138 on: Thu, 23 November 2017, 22:40:29 »
Here's more info on the Red Scarf project: https://www.chiphell.com/thread-1776866-1-1.html

seems the prototype of RS MX0110 is out in Sep, which is months earlier than this IC thread...
Looks like the Modern M0110 has a bit more bezel then the one from Chiphell. For me, the Modern looks cooler, though the might be similar..

I like them both but the one from Chiphell looks like it could be slightly more ergonomic? Do we know anything about this other board?

I just talked with RS yesterday about the MX0110 and he told me he has worked on this board for quite a long time, longer than the time since he post the prototype in Chiphell.
He is trying to make a exact replica of Apple 0110 with aluminum so you can see MX0110 uses usb tybe b, which looks similar to a RJ 45, and also 2 hubs.

RS also says the original plan of MX0110 GB was months before but he was too busy so it is delayed.
I asked him about the current plan of GB and he told me `soon`.

In chiphell RS mentioned the price is about 200USD. But it seems not to be the final price.
HHKB Type-s / 4x KMAC Happy / 3x Duck Viper v1 / 2x Duck Viper v2 / 4x Duck Viper Duck TCV3 / Red Scarf 77 / 2x Infinity 60 / 2x ALF HHKB / LZ-CE / FJELL / Canoe / Canoe PC / Canoe FE / ARES Prototype / 2x Ares / LC-CLSh / TX60 / YODA2 / E6-V2 / E6-V2 FE / CAMP LC60 / 2x EM 7 / 4x Leaf 60 / UHK / Project F / Polaris / 4x Duck Viper v3 / TX60 v2 / Thermal / Matrix Falcon / TX60 v3 / 2x TMO50 / 2x Dolice / Dolphin 65 / Dolphin 60 / Plenty of keycaps

Offline nguyenhimself

  • Posts: 672
Re: [IC] Modern M0110
« Reply #139 on: Fri, 24 November 2017, 01:24:39 »
USB Type B? Now that is eccentric and staying true to the original.

But hey, it got 2 USB Type A port. Even if those turned out not to be powerful enough for charging devices, just being able to plug my mouse in there would be a win already.

More than one USB ports is exactly what I always wanted more boards to implement, right next to split spacebars.

Offline aanoi

  • Posts: 7
  • Location: Seattle, WA
    • Drew Rios
Re: [IC] Modern M0110
« Reply #140 on: Tue, 28 November 2017, 19:23:53 »
I've missed out on some boards I've really wanted because i missed the group buy before so i'm going to be watching this thread like maaad. This is a dream board for me :)

Offline schmoktopus

  • Posts: 75
Re: [IC] Modern M0110
« Reply #141 on: Wed, 29 November 2017, 14:00:49 »
Is there any thread for the other board, the MX0110? Or any source to get updates and information?

Offline dead_pixel_design

  • Posts: 623
  • Location: Portland, OR
  • IIIV is not a Roman Numeral. Positive Vibes.
Re: [IC] Modern M0110
« Reply #142 on: Wed, 29 November 2017, 16:26:07 »
Is there any thread for the other board, the MX0110? Or any source to get updates and information?

Right now all of the info I have gotten has been from the MD comments on the Jukebox project and on this page: https://www.chiphell.com/thread-1776866-1-1.html

Offline janglad

  • * Vendor
  • Thread Starter
  • Posts: 632
  • Location: Belgium
  • qoda.studio
    • Clavier.xyz
Re: [IC] Modern M0110
« Reply #143 on: Thu, 30 November 2017, 14:48:33 »
Hi

A couple of updates on the M0110:

We're in talks with the same factory right now about manufacturing a better version of the first proto. They have requoted us and price has increased about $20. Right now we're looking into getting at least 2 more protos, that way we can also make one with ceracoating. Sadly the proto costs are going to the thousands of dollars right now ...

Also, I know I have probably been teasing this for +2 months on Discord and all now, but I will finally be able to put a price on the B60 (still looking for a better name hehe) this weekend. This will be a budget 60% case since I feel like there really isn't a good option right now. Keep your eyes out for this  :thumb:

https://i.imgur.com/BGoCbuU.png
Either way I really hope we can launch this as soon as possible and deliver a nice high quality case :D :D

Offline DJ Shoko

  • Posts: 146
Re: [IC] Modern M0110
« Reply #144 on: Thu, 30 November 2017, 15:30:33 »
I'm super excited to see the ceracoated Modern M0110, this is probably the board I'm looking forward the most to atm and I really hope the prototyping and GB launch goes smoothly. Also the B60 is looking good too.


Offline Kafka

  • Posts: 370
  • i like clean things
Re: [IC] Modern M0110
« Reply #145 on: Thu, 30 November 2017, 18:20:12 »
Make sure when you cerakote, you tell them the finish you want. OG g80 style plastic texture would be sick :thumb:

Also, most cerakote shops can color match if you bring them a sample

Offline nguyenhimself

  • Posts: 672
Re: [IC] Modern M0110
« Reply #146 on: Thu, 30 November 2017, 21:27:33 »
Hi

A couple of updates on the M0110:

We're in talks with the same factory right now about manufacturing a better version of the first proto. They have requoted us and price has increased about $20. Right now we're looking into getting at least 2 more protos, that way we can also make one with ceracoating. Sadly the proto costs are going to the thousands of dollars right now ...

Also, I know I have probably been teasing this for +2 months on Discord and all now, but I will finally be able to put a price on the B60 (still looking for a better name hehe) this weekend. This will be a budget 60% case since I feel like there really isn't a good option right now. Keep your eyes out for this  :thumb:

https://i.imgur.com/BGoCbuU.png
Either way I really hope we can launch this as soon as possible and deliver a nice high quality case :D :D

Good news! BTW, do you have in mind what the color options will be like yet? Now that I typed on a Revo RJ case IRL, I kinda want a black anodized case too 🙂

Offline WhitePlate

  • Posts: 61
  • First Grader of Nobody
Re: [IC] Modern M0110
« Reply #147 on: Wed, 06 December 2017, 07:19:19 »
Would be dope if there was a beige colorway like the original m0110.  Something powder coated maybe.

 Similar to this:

Offline DALExSNAIL

  • The User Formerly Known as 'Formerly DudeSnail'
  • * Esteemed Elder
  • Posts: 1500
  • Location: Port Wentworth, GA
  • 𝖋𝖚𝖈𝖐 𝖆𝖑𝖕𝖘
Re: [IC] Modern M0110
« Reply #148 on: Wed, 06 December 2017, 08:19:25 »
Would be dope if there was a beige colorway like the original m0110.  Something powder coated maybe.

 Similar to this:

+1

Offline Troif

  • Posts: 112
  • Location: Barcelona
  • Carpe Diem!!!
    • Daniel Ferrer
Re: [IC] Modern M0110
« Reply #149 on: Wed, 06 December 2017, 16:21:53 »
+2


Sent from my iPhone using Tapatalk
--
Filco TKL Ninja Blues / CODE Greens / Pok3r Clears / HHKBpro2 / RF 87U 55g / Novatouch TKL / KC60 Clears / SSK and also regular Model M