Author Topic: [IC] 96 Keyboard: ALU/ACR/BRASS from YMDK [GB started]  (Read 9870 times)

0 Members and 1 Guest are viewing this topic.

Offline vincent88928

  • Thread Starter
  • Posts: 91
  • Location: Guangdong,China
  • Have Fun Everywhere
    • YMDK
[IC] 96 Keyboard: ALU/ACR/BRASS from YMDK [GB started]
« on: Sat, 06 January 2018, 08:32:51 »
      Hello Geekhackers!

      Here is Vincent from YMDK and here is the second IC for our new 96-Keyboard. This time we want to offer something with an higher quality than before, something different.
      We made an aluminium keyboard, with both aluminium and acrylic bottom and many options to add.
      Name is still pending and will be engraved on the bottom with the logo 

      New album: https://imgur.com/a/AsPpP
      Old album: https://imgur.com/a/Xawkd

      NEW IC HERE
      https://docs.google.com/forms/d/e/1FAIpQLScIH7c5wY8wB1IjhhDkMncFNg28uUAZYdY4V3UK0rX7i7kp1Q/viewform
      
      BASE KIT 1 -  $150   (if >100 units, otherwise +$15):
      
  • Anodized aluminium top
  • Frosted acrylic bottom
  • Anodized Aluminium plate (with switch top opening holes)
  • PCB (QMK, different from YMD96, gold pads and higher quality)
  • Stabilizers, etc..

      BASE KIT 2 -  $200  (if >100 units, otherwise +$15):
      
  • Anodized aluminium top
  • Anodized aluminium bottom
  • Brass Weight (coated with electroplating)
  • Anodized Aluminium plate (with switch top opening holes)
  • PCB (QMK, different from YMD96, gold pads and higher quality)
  • Stabilizers, etc..
      Basically kit 2 is like 1 but with alu bottom (different design as well) and a brass weight, you will not have RGB in this case.   

      BASE KIT 3 -  $260
      As above but you also get the acrylic bottom, basically you get both the bottom of the cases, the RGB version and the heavy version.   

      Other options   
      
  • Genuine Cherry stabs instead of OEM: +$5
  • Brass plate only (you will not get alu plate, only 1 brass electroplated plate): +$20
  • Additional Brass plate (you get both brass electroplated + alu plate): +$40
  • Extra PCB: +$27
  • Switches, we will have many options, switches prices will be similar to YMD96 GB: 105 gateron $19.5  Cherry something more, etc..
  • Soldering service, not expensive, still to quote, we are considering clipping and lubing stabs too

      Name still must be decided, you can help on this :)
      Shipping will cost like the YMD96 GB, affordable
      The keyboard will support many every layouts
      For colors (plate and case), we are considering using the same colors of YMD96, these, but you can give us ideas, also considering Dark Purple. 
      Please help us in this second IC!
      Also note that we are in a different timezone, so we might not answer fast but please write below your questions.
      
      Greetings 
      -Vincent/YMDK 
« Last Edit: Sat, 20 January 2018, 08:25:37 by vincent88928 »
Have Fun Everywhere

Offline Myoth

  • Posts: 110
Re: [IC] 96 Keyboard: ALU/ACR/BRASS from YMDK
« Reply #1 on: Sat, 06 January 2018, 11:01:13 »
Very interested !

Offline Vigrith

  • Posts: 1843
Re: [IC] 96 Keyboard: ALU/ACR/BRASS from YMDK
« Reply #2 on: Sat, 06 January 2018, 11:42:12 »
This is great, interested for sure.

Offline m4us

  • Posts: 11
  • Location: Germany
  • regretting ISO User
Re: [IC] 96 Keyboard: ALU/ACR/BRASS from YMDK
« Reply #3 on: Sat, 06 January 2018, 12:16:14 »
The price point is awesome, i really need a board with that layout

Offline azharkh

  • Posts: 30
Re: [IC] 96 Keyboard: ALU/ACR/BRASS from YMDK
« Reply #4 on: Sat, 06 January 2018, 22:12:17 »
I'm super interested,  it's like you knew I was on the hunt for a 96 key.

Also that price is most definitely right.

Sent from my Pixel 2 XL using Tapatalk


Offline nathanchere

  • Posts: 702
Re: [IC] 96 Keyboard: ALU/ACR/BRASS from YMDK
« Reply #5 on: Mon, 08 January 2018, 00:07:02 »
Add split spacebar support and this would be amazing

Offline amnesia0287

  • Formerly Amnesia
  • Posts: 1199
Re: [IC] 96 Keyboard: ALU/ACR/BRASS from YMDK
« Reply #6 on: Mon, 08 January 2018, 00:14:03 »
What exactly do you mean by an electroplated weight?

Is it a brass weight electroplated for looks?

Or is it something else electroplated with brass? If so what is the actual weight made of? Steel? Aluminum?

Offline KorbenDallas

  • Posts: 52
Re: [IC] 96 Keyboard: ALU/ACR/BRASS from YMDK
« Reply #7 on: Mon, 08 January 2018, 03:23:23 »
This is looking great, really love the price. I’m definitely interested in #2 with add brass plate

Offline vincent88928

  • Thread Starter
  • Posts: 91
  • Location: Guangdong,China
  • Have Fun Everywhere
    • YMDK
Re: [IC] 96 Keyboard: ALU/ACR/BRASS from YMDK
« Reply #8 on: Mon, 08 January 2018, 04:24:58 »
Have Fun Everywhere

Offline vincent88928

  • Thread Starter
  • Posts: 91
  • Location: Guangdong,China
  • Have Fun Everywhere
    • YMDK
Re: [IC] 96 Keyboard: ALU/ACR/BRASS from YMDK
« Reply #9 on: Mon, 08 January 2018, 04:25:48 »
This is great, interested for sure.
Tks,man
Have Fun Everywhere

Offline vincent88928

  • Thread Starter
  • Posts: 91
  • Location: Guangdong,China
  • Have Fun Everywhere
    • YMDK
Re: [IC] 96 Keyboard: ALU/ACR/BRASS from YMDK
« Reply #10 on: Mon, 08 January 2018, 04:28:53 »
Add split spacebar support and this would be amazing
We are considering it,man
« Last Edit: Mon, 08 January 2018, 04:53:28 by vincent88928 »
Have Fun Everywhere

Offline vincent88928

  • Thread Starter
  • Posts: 91
  • Location: Guangdong,China
  • Have Fun Everywhere
    • YMDK
Re: [IC] 96 Keyboard: ALU/ACR/BRASS from YMDK
« Reply #11 on: Mon, 08 January 2018, 04:35:38 »
What exactly do you mean by an electroplated weight?

Is it a brass weight electroplated for looks?

Or is it something else electroplated with brass? If so what is the actual weight made of? Steel? Aluminum?
It's made of brass,electroplated on brass,not other material
Have Fun Everywhere

Offline KaosJ

  • Posts: 1054
Re: [IC] 96 Keyboard: ALU/ACR/BRASS from YMDK
« Reply #12 on: Mon, 08 January 2018, 04:49:26 »
Add split spacebar support and this would be amazing

Split spacebar on a 96 doesn't looks great imho,  also too many layouts will turn the plate into a cheese-plate, making it almost useless    :D




Offline vincent88928

  • Thread Starter
  • Posts: 91
  • Location: Guangdong,China
  • Have Fun Everywhere
    • YMDK
Re: [IC] 96 Keyboard: ALU/ACR/BRASS from YMDK
« Reply #13 on: Mon, 08 January 2018, 04:55:08 »
This is looking great, really love the price. I’m definitely interested in #2 with add brass plate
Tks
Have Fun Everywhere

Offline bluesclera

  • Posts: 177
  • Location: Toronto, Canada
Re: [IC] 96 Keyboard: ALU/ACR/BRASS from YMDK
« Reply #14 on: Mon, 08 January 2018, 05:17:10 »
Is a brass or steel body possible as an option instead of aluminum?  I for one would pay whatever the cost.

Offline KaosJ

  • Posts: 1054
Re: [IC] 96 Keyboard: ALU/ACR/BRASS from YMDK
« Reply #15 on: Mon, 08 January 2018, 08:38:18 »
Is a brass or steel body possible as an option instead of aluminum?  I for one would pay whatever the cost.

That's like 5-6kg+, can be considered a weapon, not a keyboard lul




Offline nathanchere

  • Posts: 702
Re: [IC] 96 Keyboard: ALU/ACR/BRASS from YMDK
« Reply #16 on: Mon, 08 January 2018, 08:57:03 »
Split spacebar on a 96 doesn't looks great imho
You are wrong imho :D

Offline KaosJ

  • Posts: 1054
Re: [IC] 96 Keyboard: ALU/ACR/BRASS from YMDK
« Reply #17 on: Mon, 08 January 2018, 09:02:11 »
Split spacebar on a 96 doesn't looks great imho
You are wrong imho :D

There is any around btw?  I don't remember any split spacebar 96 honestly. 




Offline E.E.L. Ambiense

  • Posts: 86
  • Location: Brevard Cty, FL
  • Acrylic Heretic
    • E.E.L. Ambiense Industries
Re: [IC] 96 Keyboard: ALU/ACR/BRASS from YMDK
« Reply #18 on: Mon, 08 January 2018, 09:55:44 »
Nice to see you over here, Vincent!

I filled out the first IC on Reddit a while back; I might jump on it but not sure just yet.  Too many projects going on at the moment. 

Name candidate for the deck: Messier-96!
Case modder by trade; mech-deck'r for fun!

Offline KorbenDallas

  • Posts: 52
Re: [IC] 96 Keyboard: ALU/ACR/BRASS from YMDK
« Reply #19 on: Mon, 08 January 2018, 12:37:52 »
Add split spacebar support and this would be amazing

Split spacebar on a 96 doesn't looks great imho,  also too many layouts will turn the plate into a cheese-plate, making it almost useless    :D

I have to agree on this one, mainly because of the larger plate. Wouldn’t want to sacrifice rigidity of the plate for split space bar compatibility, which probably a small minority of the group would use anyway.

Offline KaosJ

  • Posts: 1054
Re: [IC] 96 Keyboard: ALU/ACR/BRASS from YMDK
« Reply #20 on: Mon, 08 January 2018, 13:29:01 »
Add split spacebar support and this would be amazing

Split spacebar on a 96 doesn't looks great imho,  also too many layouts will turn the plate into a cheese-plate, making it almost useless    :D

mainly because of the larger plate.

This, there will be already many layout supported, adding more will make pointless the plate, especially on the base alu plate (on the brass plate will be better but still..)   




Offline Trousers

  • Posts: 41
Re: [IC] 96 Keyboard: ALU/ACR/BRASS from YMDK
« Reply #21 on: Mon, 08 January 2018, 17:16:48 »
That looks pretty great. I would like to see one fully assembled, but I'm certainly interested.

Offline azharkh

  • Posts: 30
Re: [IC] 96 Keyboard: ALU/ACR/BRASS from YMDK
« Reply #22 on: Tue, 09 January 2018, 00:07:02 »
alps support?

Sent from my Pixel 2 XL using Tapatalk


Offline vincent88928

  • Thread Starter
  • Posts: 91
  • Location: Guangdong,China
  • Have Fun Everywhere
    • YMDK
Re: [IC] 96 Keyboard: ALU/ACR/BRASS from YMDK
« Reply #23 on: Tue, 09 January 2018, 00:40:51 »
Is a brass or steel body possible as an option instead of aluminum?  I for one would pay whatever the cost.
Whole body?Will consider it but that should not be a common request...
Have Fun Everywhere

Offline vincent88928

  • Thread Starter
  • Posts: 91
  • Location: Guangdong,China
  • Have Fun Everywhere
    • YMDK
Re: [IC] 96 Keyboard: ALU/ACR/BRASS from YMDK
« Reply #24 on: Tue, 09 January 2018, 00:43:32 »
Is a brass or steel body possible as an option instead of aluminum?  I for one would pay whatever the cost.

That's like 5-6kg+, can be considered a weapon, not a keyboard lul
Seems not only me think like this
Have Fun Everywhere

Offline vincent88928

  • Thread Starter
  • Posts: 91
  • Location: Guangdong,China
  • Have Fun Everywhere
    • YMDK
Re: [IC] 96 Keyboard: ALU/ACR/BRASS from YMDK
« Reply #25 on: Tue, 09 January 2018, 00:45:42 »
That looks pretty great. I would like to see one fully assembled, but I'm certainly interested.
There is assembly service surely,no worries,but for DIY kit,self assembly is much popular
Have Fun Everywhere

Offline vincent88928

  • Thread Starter
  • Posts: 91
  • Location: Guangdong,China
  • Have Fun Everywhere
    • YMDK
Re: [IC] 96 Keyboard: ALU/ACR/BRASS from YMDK
« Reply #26 on: Tue, 09 January 2018, 00:49:22 »
Nice to see you over here, Vincent!

I filled out the first IC on Reddit a while back; I might jump on it but not sure just yet.  Too many projects going on at the moment. 

Name candidate for the deck: Messier-96!
Wow...
Have Fun Everywhere

Offline cdn-mini

  • Posts: 67
Re: [IC] 96 Keyboard: ALU/ACR/BRASS from YMDK
« Reply #27 on: Tue, 09 January 2018, 11:22:38 »
Is a brass or steel body possible as an option instead of aluminum?  I for one would pay whatever the cost.
Whole body?Will consider it but that should not be a common request...


Or just brass top and aluminum/plastic bottom to keep cost down. I'm in.

Offline nathanchere

  • Posts: 702
Re: [IC] 96 Keyboard: ALU/ACR/BRASS from YMDK
« Reply #28 on: Tue, 09 January 2018, 12:58:41 »

There is any around btw?  I don't remember any split spacebar 96 honestly.
[/quote
So how can you say it looks bad? :P

Offline HOBI3CAT

  • Posts: 83
  • Location: North Carolina, USA
  • FraktalKaps.com
    • Fraktal Kaps Website
Re: [IC] 96 Keyboard: ALU/ACR/BRASS from YMDK
« Reply #29 on: Tue, 09 January 2018, 13:16:11 »
been looking for a 96-key kit for a while, this looks incredible! I love the design of the acrylic bottom option, but would definitely like to see a brass plate option, and possibly a brass weight in the acrylic if possible (seems like the acrylic is thick enough to support it). The brass weight in the acrylic would be nice to have, but definitely not a dealbreaker if the cost is too high.
Eat, Sleep, Resin, Repeat.

Offline KaosJ

  • Posts: 1054
Re: [IC] 96 Keyboard: ALU/ACR/BRASS from YMDK
« Reply #30 on: Tue, 09 January 2018, 13:36:27 »
been looking for a 96-key kit for a while, this looks incredible! I love the design of the acrylic bottom option, but would definitely like to see a brass plate option, and possibly a brass weight in the acrylic if possible (seems like the acrylic is thick enough to support it). The brass weight in the acrylic would be nice to have, but definitely not a dealbreaker if the cost is too high.

He wanted to offer a cheap kit as well and the brass weight will bump the price of the cheap kit to a $190-200. 
Also by making a hole on the acrylic, to fit the brass weight that you see on alu, it will raise the price because you have to produce 2 different acrylic cases, one with the hole, one without the hole and acrylics has an high failure rate during production, making it probably more expensive than alu lol or something really near.

So how can you say it looks bad? :P

Well you can imagine it! I have the split on the 75%, if i put a numpad near the 75% i can see how it will look.  Honestly i find usefull the split spacebar on small keebs, 40-60% especially.   
That's also just my opinion, but i would not sacrifice the rigidity of the plate to make space to something that really few few people will use on a 96-keyboard. If you sum all the layout of their previous 96 (ymd96, basically every layout) + split spacebar, you will have a keyboard really not sturdy near the spacebar.   
To be totally honest, i would even prefer to remove some of the rarely used layout that were on the ymd 96. The plate has one purpouse to me, if you want to have a cheese-plate you should go pcb-mount+no-plate+switch films :D 





Offline Trousers

  • Posts: 41
Re: [IC] 96 Keyboard: ALU/ACR/BRASS from YMDK
« Reply #31 on: Tue, 09 January 2018, 16:32:51 »
That looks pretty great. I would like to see one fully assembled, but I'm certainly interested.
There is assembly service surely,no worries,but for DIY kit,self assembly is much popular

No, I have no problem assembling the board, but I would like to see pictures of it with switches and keys to see what the final product looks like.

Offline wholypantalones

  • Posts: 878
  • Location: The Mitten
  • text and icon mods plz.
Re: [IC] 96 Keyboard: ALU/ACR/BRASS from YMDK
« Reply #32 on: Tue, 09 January 2018, 17:18:32 »
That looks pretty great. I would like to see one fully assembled, but I'm certainly interested.
There is assembly service surely,no worries,but for DIY kit,self assembly is much popular

No, I have no problem assembling the board, but I would like to see pictures of it with switches and keys to see what the final product looks like.

I agree with my friend trousers here.

Offline vincent88928

  • Thread Starter
  • Posts: 91
  • Location: Guangdong,China
  • Have Fun Everywhere
    • YMDK
Re: [IC] 96 Keyboard: ALU/ACR/BRASS from YMDK
« Reply #33 on: Wed, 10 January 2018, 08:06:02 »
Add split spacebar support and this would be amazing

Split spacebar on a 96 doesn't looks great imho,  also too many layouts will turn the plate into a cheese-plate, making it almost useless    :D
Yeah...
Have Fun Everywhere

Offline vincent88928

  • Thread Starter
  • Posts: 91
  • Location: Guangdong,China
  • Have Fun Everywhere
    • YMDK
Re: [IC] 96 Keyboard: ALU/ACR/BRASS from YMDK
« Reply #34 on: Wed, 10 January 2018, 08:07:41 »
Is a brass or steel body possible as an option instead of aluminum?  I for one would pay whatever the cost.
Whole body?Will consider it but that should not be a common request...


Or just brass top and aluminum/plastic bottom to keep cost down. I'm in.
Good idea however this kind of combination needs much time to design to make the surface outstanding.
Have Fun Everywhere

Offline vincent88928

  • Thread Starter
  • Posts: 91
  • Location: Guangdong,China
  • Have Fun Everywhere
    • YMDK
Re: [IC] 96 Keyboard: ALU/ACR/BRASS from YMDK
« Reply #35 on: Wed, 10 January 2018, 08:08:59 »
That looks pretty great. I would like to see one fully assembled, but I'm certainly interested.
There is assembly service surely,no worries,but for DIY kit,self assembly is much popular

No, I have no problem assembling the board, but I would like to see pictures of it with switches and keys to see what the final product looks like.
Will make one for the surface soon

I agree with my friend trousers here.
Have Fun Everywhere

Offline vincent88928

  • Thread Starter
  • Posts: 91
  • Location: Guangdong,China
  • Have Fun Everywhere
    • YMDK
Re: [IC] 96 Keyboard: ALU/ACR/BRASS from YMDK
« Reply #36 on: Wed, 10 January 2018, 08:10:02 »
That looks pretty great. I would like to see one fully assembled, but I'm certainly interested.
There is assembly service surely,no worries,but for DIY kit,self assembly is much popular

No, I have no problem assembling the board, but I would like to see pictures of it with switches and keys to see what the final product looks like.
Understood
Have Fun Everywhere

Offline vincent88928

  • Thread Starter
  • Posts: 91
  • Location: Guangdong,China
  • Have Fun Everywhere
    • YMDK
Re: [IC] 96 Keyboard: ALU/ACR/BRASS from YMDK
« Reply #37 on: Wed, 10 January 2018, 08:17:16 »
been looking for a 96-key kit for a while, this looks incredible! I love the design of the acrylic bottom option, but would definitely like to see a brass plate option, and possibly a brass weight in the acrylic if possible (seems like the acrylic is thick enough to support it). The brass weight in the acrylic would be nice to have, but definitely not a dealbreaker if the cost is too high.

He wanted to offer a cheap kit as well and the brass weight will bump the price of the cheap kit to a $190-200. 
Also by making a hole on the acrylic, to fit the brass weight that you see on alu, it will raise the price because you have to produce 2 different acrylic cases, one with the hole, one without the hole and acrylics has an high failure rate during production, making it probably more expensive than alu lol or something really near.

So how can you say it looks bad? :P

Well you can imagine it! I have the split on the 75%, if i put a numpad near the 75% i can see how it will look.  Honestly i find usefull the split spacebar on small keebs, 40-60% especially.   
That's also just my opinion, but i would not sacrifice the rigidity of the plate to make space to something that really few few people will use on a 96-keyboard. If you sum all the layout of their previous 96 (ymd96, basically every layout) + split spacebar, you will have a keyboard really not sturdy near the spacebar.   
To be totally honest, i would even prefer to remove some of the rarely used layout that were on the ymd 96. The plate has one purpouse to me, if you want to have a cheese-plate you should go pcb-mount+no-plate+switch films :D
;D
Have Fun Everywhere

Offline jihadu

  • Posts: 283
  • Location: Portugal
Re: [IC] 96 Keyboard: ALU/ACR/BRASS from YMDK
« Reply #38 on: Sat, 13 January 2018, 09:21:24 »
Hi Vincent! Would it be possible to buy a kit with brass weight that's not engraved?

Offline KaosJ

  • Posts: 1054
Re: [IC] 96 Keyboard: ALU/ACR/BRASS from YMDK
« Reply #39 on: Sun, 14 January 2018, 06:17:04 »
Hi Vincent! Would it be possible to buy a kit with brass weight that's not engraved?

I asked directly the same before and he said yes, probably it is still valid 




Offline vincent88928

  • Thread Starter
  • Posts: 91
  • Location: Guangdong,China
  • Have Fun Everywhere
    • YMDK
Re: [IC] 96 Keyboard: ALU/ACR/BRASS from YMDK
« Reply #40 on: Mon, 15 January 2018, 06:48:33 »
Hi Vincent! Would it be possible to buy a kit with brass weight that's not engraved?

I asked directly the same before and he said yes, probably it is still valid
Yes sure,but need to clarify when ordering to me
Have Fun Everywhere

Offline vincent88928

  • Thread Starter
  • Posts: 91
  • Location: Guangdong,China
  • Have Fun Everywhere
    • YMDK
Re: [IC] 96 Keyboard: ALU/ACR/BRASS from YMDK
« Reply #41 on: Mon, 15 January 2018, 06:50:31 »
That looks pretty great. I would like to see one fully assembled, but I'm certainly interested.
There is assembly service surely,no worries,but for DIY kit,self assembly is much popular

No, I have no problem assembling the board, but I would like to see pictures of it with switches and keys to see what the final product looks like.
Fully assembled one will come out soon.This keyboard design is modified many times...Many advice up to now from fans

I agree with my friend trousers here.
Have Fun Everywhere

Offline jihadu

  • Posts: 283
  • Location: Portugal
Re: [IC] 96 Keyboard: ALU/ACR/BRASS from YMDK
« Reply #42 on: Tue, 16 January 2018, 04:44:31 »
Hi Vincent! Would it be possible to buy a kit with brass weight that's not engraved?

I asked directly the same before and he said yes, probably it is still valid
Yes sure,but need to clarify when ordering to me
Thanks

Offline vincent88928

  • Thread Starter
  • Posts: 91
  • Location: Guangdong,China
  • Have Fun Everywhere
    • YMDK
Re: [IC] 96 Keyboard: ALU/ACR/BRASS from YMDK [GB started]
« Reply #43 on: Sat, 20 January 2018, 08:26:49 »
      Hello Geekhackers!

      Here is Vincent from YMDK and here is the second IC for our new 96-Keyboard. This time we want to offer something with an higher quality than before, something different.
      We made an aluminium keyboard, with both aluminium and acrylic bottom and many options to add.
      Name is still pending and will be engraved on the bottom with the logo 

      New album: https://imgur.com/a/AsPpP
      Old album: https://imgur.com/a/Xawkd

      NEW IC HERE
      https://docs.google.com/forms/d/e/1FAIpQLScIH7c5wY8wB1IjhhDkMncFNg28uUAZYdY4V3UK0rX7i7kp1Q/viewform
      
      BASE KIT 1 -  $150   (if >100 units, otherwise +$15):
      
  • Anodized aluminium top
  • Frosted acrylic bottom
  • Anodized Aluminium plate (with switch top opening holes)
  • PCB (QMK, different from YMD96, gold pads and higher quality)
  • Stabilizers, etc..

      BASE KIT 2 -  $200  (if >100 units, otherwise +$15):
      
  • Anodized aluminium top
  • Anodized aluminium bottom
  • Brass Weight (coated with electroplating)
  • Anodized Aluminium plate (with switch top opening holes)
  • PCB (QMK, different from YMD96, gold pads and higher quality)
  • Stabilizers, etc..
      Basically kit 2 is like 1 but with alu bottom (different design as well) and a brass weight, you will not have RGB in this case.   

      BASE KIT 3 -  $260
      As above but you also get the acrylic bottom, basically you get both the bottom of the cases, the RGB version and the heavy version.   

      Other options   
      
  • Genuine Cherry stabs instead of OEM: +$5
  • Brass plate only (you will not get alu plate, only 1 brass electroplated plate): +$20
  • Additional Brass plate (you get both brass electroplated + alu plate): +$40
  • Extra PCB: +$27
  • Switches, we will have many options, switches prices will be similar to YMD96 GB: 105 gateron $19.5  Cherry something more, etc..
  • Soldering service, not expensive, still to quote, we are considering clipping and lubing stabs too

      Name still must be decided, you can help on this :)
      Shipping will cost like the YMD96 GB, affordable
      The keyboard will support many every layouts
      For colors (plate and case), we are considering using the same colors of YMD96, these, but you can give us ideas, also considering Dark Purple. 
      Please help us in this second IC!
      Also note that we are in a different timezone, so we might not answer fast but please write below your questions.
      
      Greetings 
      -Vincent/YMDK
IC closed, GB started here: https://geekhack.org/index.php?topic=93614.0
Have Fun Everywhere