Hey everyone!
I’m pleased to finally announce the group buy information for Memento.
The buy will take place on Saturday, December 11th at 10AM EST. All other information, including pricing, extras, and prototype pictures, can be found on our website, which has been updated in preparation for the buy. https://eniigmakeyboards.com/collections/memento (https://eniigmakeyboards.com/collections/memento)
We’re super excited about the final prototype, and how high-quality it feels in hand. It is truly something we are proud to stand behind. However, we understand that after the Vertigo quality letdown, that some of you may have some concerns about it happening again, so we created a changelog to highlight some of the improvements. https://eniigmakeyboards.com/pages/memento-prototype-changelog (https://eniigmakeyboards.com/pages/memento-prototype-changelog)
We’re looking forward to seeing many of you on December 11th! We will continue keeping y’all updated until then! Keep an eye out later this week for some build streams.
Thank you all!
What is the front height? I love the sides but it looks a bit tallFront height is about 19.3mm!
You could afford to lose a couple of those screws mateIt’s more of a stylistic choice! In theory, the design could be executed without external facing screws, but this was something we had envisioned in the early stages of the design.
You could afford to lose a couple of those screws mateIt’s more of a stylistic choice! In theory, the design could be executed without external facing screws, but this was something we had envisioned in the early stages of the design.
Totally understand this sentiment! The outer screws can’t use 6 screws, due to the centered daughterboard. 5 screws was an option, but we weren’t a fan of the asymmetrical look.You could afford to lose a couple of those screws mateIt’s more of a stylistic choice! In theory, the design could be executed without external facing screws, but this was something we had envisioned in the early stages of the design.
I get that, but I feel like the same aesthetic could be excecuted with 6 screws
I hate screwing things in though might be biased
Wow, loving everything about this except maybe the price heh. This is definitely top contender in my search for a WKL o-ring 60. Colors are looking amazing, would kill to see ano samples.We actually already have ano samples! I will take some photos and post them later this weekend.
(Attachment Link) Just to explain my personal opinion to prevent everyone in the community from stepping on landmines. This is the last design vertigo from the eniigma team. In the picture is the peeling off of the E-white surface marked by my bottom, one of which is 1cm, but Enigma said that this is within the range of A-stock's qc standard, and that if it is to be replaced, the rest of the bottom will also have this situation. It may be that there is something wrong with my understanding of A-stcok!!
(Attachment Link) Just to explain my personal opinion to prevent everyone in the community from stepping on landmines. This is the last design vertigo from the eniigma team. In the picture is the peeling off of the E-white surface marked by my bottom, one of which is 1cm, but Enigma said that this is within the range of A-stock's qc standard, and that if it is to be replaced, the rest of the bottom will also have this situation. It may be that there is something wrong with my understanding of A-stcok!!Our full response (posted earlier in Discord)
(Attachment Link) Just to explain my personal opinion to prevent everyone in the community from stepping on landmines. This is the last design vertigo from the eniigma team. In the picture is the peeling off of the E-white surface marked by my bottom, one of which is 1cm, but Enigma said that this is within the range of A-stock's qc standard, and that if it is to be replaced, the rest of the bottom will also have this situation. It may be that there is something wrong with my understanding of A-stcok!!
(Attachment Link) Just to explain my personal opinion to prevent everyone in the community from stepping on landmines. This is the last design vertigo from the eniigma team. In the picture is the peeling off of the E-white surface marked by my bottom, one of which is 1cm, but Enigma said that this is within the range of A-stock's qc standard, and that if it is to be replaced, the rest of the bottom will also have this situation. It may be that there is something wrong with my understanding of A-stcok!!
this + its 565 for a standard edition for a 60% with a thin ss backplate. A 60%!!!
I get that these designs are nice and all, but we should not be encouraging eniigma pricing, esp when e-coating wearing out is considered a-stock.
how much is the LE going to be? $1200 for a 60%? give me a break.
(Attachment Link) Just to explain my personal opinion to prevent everyone in the community from stepping on landmines. This is the last design vertigo from the eniigma team. In the picture is the peeling off of the E-white surface marked by my bottom, one of which is 1cm, but Enigma said that this is within the range of A-stock's qc standard, and that if it is to be replaced, the rest of the bottom will also have this situation. It may be that there is something wrong with my understanding of A-stcok!!
Stop... I bought the SE Piggy for myself as a graduation gift... and no regrets here!
have to say I love the keyboard but I don't love the price especially with the horizontal lines in the aluminum. I get that a lot of boards are priced highly now because raw costs have gone up,but the finishing just does not really justify for the top of the line price tag. I just wish that by asking for a high end price tag, this would also use the high end factory to justify the cost.
This looks sick, I hope I do get the board, or else it's my 3rd FCFS fail, also you wrote shipping est as 2021 lolThank you! And fixed :)
Will the memento have compatibility with other 60% pcbs such as the h60?The h60 JST Version will be compatible, however, you will need a longer JST cable to connect the PCB to the daughterboard.