Use on your own risk! Neither Litster or Findecanor take any responsibility!

I modified Litster's drawings to support 1-unit wide modifiers in the outermost columns of the keyboard.
You need Litster's drawings to begin with. Only the modified drawings are part of this package.
The modified drawings contain "1U" in the filename.

However... and this is a big however: bpiphany's PCB design does not support 1-unit modifiers completely
because of a bug when it was designed. Some soldering holes are a mm off from where they should be
and some switches will not fit.
You will either have to modify the PCBs somewhat or bend pins in weird angles.
I suggest that you expand the holes with a small drill bit and bend the pins a little against the
copper plating that then remain in the holes.

---
Findecanor / 2013-05-04
