geekhack
geekhack Marketplace => Group Buys and Preorders => Topic started by: worldspawn on Tue, 16 April 2019, 23:49:35
-
Firmware available here until I get it into QMK https://github.com/worldspawn00/Firmwares
This GB is for the QMK compatible Pain27 v2
Don't let your memes be dreams!
Current status: All orders are shipped, EU orders are all in the hands of the proxy and should all be shipped shortly. Extras are available in my shop.
Running the Group Buy through an Etsy shop for simplification.
US Store
Basic Kit: https://www.etsy.com/listing/684512424/preorder-pain27-kit-caps-and-switches
Frameable Kit: https://www.etsy.com/listing/684521462/preorder-pain27-frameable-caps-switches
Alpha(28) Addon: https://www.etsy.com/listing/684510800/preorder-alpha28-kit-does-not-include
Some of you may have seen the frameable version of the board at the Austin meetup a few weeks ago, I've now updated the design with FTIR LEDs under the spacebar so the engraving can be lit!
Main differnces between V2 and the original design by jonathan(uuupah) dropped the backlighting, added RGB LED connections under the spacebar for front and rear lighting, and moved the pro micro connection under the keys!
(https://i.imgur.com/ACpbJzg.jpg)
(https://i.imgur.com/78wuNfh.jpg)
(https://i.imgur.com/ApVsML5.gif)
(https://i.imgur.com/IKEAhzP.gif)
(https://i.imgur.com/TpTPfSQ.jpg)
(https://i.imgur.com/H6gQZk7.jpg)
The Group Buy will be for a PCB, a board kit, or a frameable kit.
PCB is $9
(https://i.imgur.com/4vOtHFX.jpg)
(https://i.imgur.com/fWz5rCt.jpg)
Kits include a case (with any necessary hardware), PCB and all the electronics (diodes, pro micro, RGB LEDs) and 6.25u stabilizer
(https://i.imgur.com/3bzLyOi.jpg)
Board kit is $35 for the basic case and $55 with the premium case, seperate cases are also available
https://www.etsy.com/listing/684512424/preorder-pain27-kit-caps-and-switches
Basic case is plate and bottom
(https://i.imgur.com/1xoNmfE.jpg)
(https://i.imgur.com/eV7O5hf.jpg)
premium case is a fully enclosed 5 layer acrylic sandwich case
(https://i.imgur.com/HN83o30.jpg)
(https://i.imgur.com/Nhnquk0.jpg)
Frameable kit is $45 for the basic and $55, add $15 for engraving with either kit, seperate cases are also available
https://www.etsy.com/listing/684521462/preorder-pain27-frameable-caps-switches
Basic is just the 8x10 (or A4 for metric peeps) plate and spacer layers
(https://i.imgur.com/78wuNfh.jpg)
Premium includes a full rear enclosure
(https://i.imgur.com/HTLEWGM.jpg)
(https://i.imgur.com/53xpIo0.jpg)
Pro Micros will come preloaded with the following config (no programming necessary to get started!)
(https://i.imgur.com/D4wazy6.png)
Alpha28 kits, PCBs and/or cases will also be available as an addon at Group Buy pricing (details regarding the Alpha kits here: https://geekhack.org/index.php?topic=99040)
https://www.etsy.com/listing/684510800/preorder-alpha28-kit-does-not-include
Group buy is open from April 16 to May 5th
Orders will be placed upon end date, Shipping targeted for the week of June 2nd
-
Approved.
-
EU Proxy is live!
Pain27 with options here: https://maartenwut.com/product/pain27/
Alpha(28) with options here: https://maartenwut.com/product/alpha-28-key/
-
Nice, ordered. Will plate files be available in the future in case I will want to enframe it?
-
Yes, I'll either put them up on git, or you can contact me directly after the kits ship and I'll send you the cut files.
-
veri gud
-
1 week left, thanks everyone who's placed an order so far!
-
Just FYI, the Alpha 28 boards coming with the addop option will be the new v1.2 which has the option for SMD diodes and an independent reset switch!
-
A few days left to get an order in, GB closes Monday!
-
Last chance to get in, closes in 12 hours, thanks everyone!
-
Last chance to get in, closes in 12 hours, thanks everyone!
Would love to join, bu the EU proxy wants to charge me €18.50 shipping for two PCBs worth €16 :-(
Sent from my OnePlus 6T with a rubbish gimmicky bloody annoying unreliable in-display fingerprint reader using Tapatalk
-
Last chance to get in, closes in 12 hours, thanks everyone!
Would love to join, bu the EU proxy wants to charge me €18.50 shipping for two PCBs worth €16 :-(
Sent from my OnePlus 6T with a rubbish gimmicky bloody annoying unreliable in-display fingerprint reader using Tapatalk
Yeah same for me, unfortunate.
-
Now closed, thanks everyone!
-
Production PCBs are in!
(https://i.imgur.com/iDNCvjR.jpg)
-
Acrylic is in and I'm starting cutting the cases, still waiting on screws and LEDs to arrive from China.
-
Acrylic is in and I'm starting cutting the cases, still waiting on screws and LEDs to arrive from China.
Thanks for the update! Gonna approach this as a serious keyboard. I think it's doable, I'm OK with a Gherkin so… this leap is just a flesh wound.
-
Cases are almost all done, screws have arrived, LEDs are the last part I'm waiting on!
-
Ordered a couple Alpha28 Pcbs, very excited to get them!
-
All the parts are in, orders will go out over the next couple days, thanks everyone!
-
All the parts are in, orders will go out over the next couple days, thanks everyone!
Woo! Excited to get some pcbs and a get some cases printed :)
-
Alpha28 PCBs look awesome Having a little case printed soon, looking forward to getting something built :)
-
All orders have shipped except the Euro proxy and frameable option, I needed some better packing for those, they should also ship in the next couple days.
-
Guess I missed the EU Pain27 stock :(
Next time!
-
All orders have shipped, EU proxy has those orders on hand and will be shipping them shortly. Thanks everyone for another great GB!