geekhack

geekhack Community => Keyboards => Topic started by: vision-quest on Sun, 02 June 2019, 10:46:15

Title: 60% PCB recommendations?
Post by: vision-quest on Sun, 02 June 2019, 10:46:15

I have a Fjell on the way, and I'm interested in what PCB I should grab? Is the Zeal Rev4 the best option going around at the moment?

Title: Re: 60% PCB recommendations?
Post by: MarbleKeeb on Fri, 07 June 2019, 22:35:33

I went for DZ60, I am quite satisfied with it :)
But I do not know if it is compatible with the Fjell..

Title: Re: 60% PCB recommendations?
Post by: ArchDill on Fri, 07 June 2019, 22:36:17

Quote from: vision-quest on Sun, 02 June 2019, 10:46:15

I have a Fjell on the way, and I'm interested in what PCB I should grab? Is the Zeal Rev4 the best option going around at the moment?

I Would get whatever can be programmed with QMK

Title: Re: 60% PCB recommendations?
Post by: swedishpiehole on Fri, 07 June 2019, 23:09:10

1uphse from 1up keyboards is a good choice. I love mine.

Title: Re: 60% PCB recommendations?
Post by: nolan.hates.soymilk on Fri, 28 June 2019, 20:33:31

I don't have a huge frame of reference, but the DZ60 is a solid option, and apparently it is compatible with the Fjell!

Title: Re: 60% PCB recommendations?
Post by: nguyenhimself on Fri, 28 June 2019, 22:08:49

Go for the Zeal60 if you really need per-key RGB. Emphasis because boy you will pay for that.
Otherwise, the DZ60 is more than good enough.

Title: Re: 60% PCB recommendations?
Post by: ideus on Fri, 28 June 2019, 22:42:43

Check kbdfans site for some options there, including the DZ. Zeal's products are overpriced.

Title: Re: 60% PCB recommendations?
Post by: tex_live_utility on Sun, 30 June 2019, 09:40:58

The YD60MQ has treated me very well so far: https://www.aliexpress.com/store/product/Free-shipping-GH60-PCB-KC60-SE-Fully-Programmable-For-DIY-Mechanical-Keyboard-Poker-Faceu-HHKB-Support/429151_32799437588.html

Title: Re: 60% PCB recommendations?
Post by: _haru on Sun, 30 June 2019, 21:15:46

Quote from: tex_live_utility on Sun, 30 June 2019, 09:40:58

The YD60MQ has treated me very well so far: https://www.aliexpress.com/store/product/Free-shipping-GH60-PCB-KC60-SE-Fully-Programmable-For-DIY-Mechanical-Keyboard-Poker-Faceu-HHKB-Support/429151_32799437588.html

I second this PCB as well - very similar to the DZ60, but costs $15-20 less. Also known as the OK60.

Title: Re: 60% PCB recommendations?
Post by: deepalicious on Wed, 03 July 2019, 17:01:21

DZ60, unless per key RGB is SUPER important to you.

Title: Re: 60% PCB recommendations?
Post by: Curtis_55 on Thu, 12 December 2019, 23:30:13

Quote from: tex_live_utility on Sun, 30 June 2019, 09:40:58

The YD60MQ has treated me very well so far: https://www.aliexpress.com/store/product/Free-shipping-GH60-PCB-KC60-SE-Fully-Programmable-For-DIY-Mechanical-Keyboard-Poker-Faceu-HHKB-Support/429151_32799437588.myprepaidcenter (https://www.myprepaidcenter.website/)

Thanks for the great feedback.