Post by: jacky on Mon, 21 October 2019, 08:19:39
This is jacky ,my frist keyboard was elephant. Through this groupbuy i learn more experience about groupbuy
After groupbuy so many people pm me about extra one but not lucky i dont have also my personal one .
that is why i am post IC here ,plz let me know you opinions thanks !
(https://i.imgur.com/lr9A8TI.jpg)
More details :
1 .Top right corner it have a nametag
2 .cambered surface make this board more unique
3. Left side have RGB curved besides five macros have Rgb curved
4.There was no bottom like ca66 design coz it will make case more higher.
5.8 degree
Features:
* Pricing :350(USD) 50 units
* Colors : TBD
* PCB : QMK
*weight :only brass weight
*Plate/nametag : brass .alu.pc
I will aslo do the e -color or other Popular colors so plz give me the suggestion ,let us finish this great design
you opinion is important to me and help me get promote !!
Post by: jacky on Mon, 21 October 2019, 08:21:51
Post by: cijanzen on Mon, 21 October 2019, 08:21:56
Post by: Slash Emperor on Mon, 21 October 2019, 08:23:12
Sent from my Pixel 3 XL using Tapatalk
Post by: eugenez90 on Mon, 21 October 2019, 08:25:18
Post by: Dovan1405 on Mon, 21 October 2019, 08:26:37
Sent from my iPhone using Tapatalk
Post by: Dovan1405 on Mon, 21 October 2019, 08:27:22
Sent from my iPhone using Tapatalk
Post by: kilobravo898 on Mon, 21 October 2019, 08:27:35
Post by: Kasterborous on Mon, 21 October 2019, 08:27:50
Post by: TieuNgu on Mon, 21 October 2019, 08:28:04
Post by: Hedgey on Mon, 21 October 2019, 08:29:33
Post by: slxdegrees on Mon, 21 October 2019, 08:29:50
Post by: lolafineday on Mon, 21 October 2019, 08:39:02
Sent from my SM-G975F using Tapatalk
Post by: unluckyxiii on Mon, 21 October 2019, 08:47:23
Sent from my iPhone using Tapatalk
Post by: JSaintS on Mon, 21 October 2019, 08:53:54
Post by: SlamMakanen on Mon, 21 October 2019, 09:02:11
Sent from my iPhone using Tapatalk
Post by: iaman on Mon, 21 October 2019, 09:03:38
Purple keyboard please :DA good, deep purple would take this from a “maybe” to a “hell yeah” for me
Sent from my iPhone using Tapatalk
Post by: breckstar on Mon, 21 October 2019, 09:07:12
E-cyan/light blue like cerakote Robbins egg would be prime.
Post by: _ODIN_ on Mon, 21 October 2019, 09:08:59
If there's ISO support I'd definitely be interestedR1 supports ISO so this version shouldn't be different in that regard.
Sent from my iPhone using Tapatalk
Gesendet von meinem H8416 mit Tapatalk
Post by: victorpre on Mon, 21 October 2019, 09:36:00
Just one wish, is it possible to add to the thread the price for shipping to some regions: US, EU, Asia.. As it's not a light board I guess shipping will not be so cheap therefore people would be interested.
Thanks
Post by: SlamMakanen on Mon, 21 October 2019, 09:48:50
Oh awesome - thanks!If there's ISO support I'd definitely be interestedR1 supports ISO so this version shouldn't be different in that regard.
Sent from my iPhone using Tapatalk
Gesendet von meinem H8416 mit Tapatalk
Sent from my iPhone using Tapatalk
Post by: t0ch on Mon, 21 October 2019, 09:53:45
Post by: mrkantz on Mon, 21 October 2019, 09:56:23
Post by: yh0438 on Mon, 21 October 2019, 09:57:10
Post by: pixelpusher on Mon, 21 October 2019, 10:07:46
More details :
1 .Top right corner it have a nametag
2 .cambered surface make this board more unique
3. Left side have RGB curved besides five macros have Rgb curved
4.There was no bottom like ca66 design coz it will make case more higher.
5.8 degree
I don't understand. Is this a list of new things for this round? Do you have any sketches or mockups to show what you mean by RGB curved?
Post by: GarrettSucks on Mon, 21 October 2019, 10:20:32
Post by: jacky on Mon, 21 October 2019, 10:34:09
More details :
1 .Top right corner it have a nametag
2 .cambered surface make this board more unique
3. Left side have RGB curved besides five macros have Rgb curved
4.There was no bottom like ca66 design coz it will make case more higher.
5.8 degree
I don't understand. Is this a list of new things for this round? Do you have any sketches or mockups to show what you mean by RGB curved?
I am sort the suggestion then will change the design
rgb curved is beside the top of F row
Post by: iaman on Mon, 21 October 2019, 10:37:00
Do you have any sketches or mockups to show what you mean by RGB curved?I *think* it's the indicator (pictured unlit, it's a bit tough to see) between the left function macros and the rest of the board but I'm not entirely sure.
Post by: jacky on Mon, 21 October 2019, 10:39:20
I want to know the any channel or mail for joining GB!
https://discord.gg/7zcscC (https://discord.gg/rBmSHH)
Post by: eyedrop on Mon, 21 October 2019, 10:45:01
And e-white/e-black?
Post by: keimura on Mon, 21 October 2019, 10:49:07
-I think having a smaller layout (hhkb like but keeping the function column to the left) with the huge bezels would be really interesting. The contrast between the case size and key number would be fun.
-I don't care much for anything rgb and am neutral to whether it's there or not. If it is there then I would prefer underglow or a vertical line between the main layout and the functions.
-Actually, if you are going to add a name plate maybe add it in between the main layout and the function keys and accentuate it with rgb around it?
Whatever happens I'm supper pumped for r2!
Post by: Starius on Mon, 21 October 2019, 10:53:57
Any difference between this and r1?
Sent from my SM-G975F using Tapatalk
The name plate option is definitely one difference.
Post by: ihalatch on Mon, 21 October 2019, 11:03:11
Post by: KLÜTZ on Mon, 21 October 2019, 11:07:01
Post by: DukeEsquire on Mon, 21 October 2019, 11:08:08
Sidenote: Are you sure that you want to keep the price at $350? I though I heard that you ended up taking a loss on the first run.
Post by: InvidiousIgnoramus on Mon, 21 October 2019, 11:16:58
Post by: Willhurt2008 on Mon, 21 October 2019, 11:28:56
Post by: eyedrop on Mon, 21 October 2019, 11:42:36
OMG, the elephant! Please, make a white one like in the first run. I'm in.
I think jacky offered MAO for R1, I think e-white would be better in terms of white.
Post by: SeriousBG on Mon, 21 October 2019, 11:47:25
Post by: ChickenBear on Mon, 21 October 2019, 12:13:05
I am in the boat of not adding a badge. I think part of the S7's aesthetic is the smoothness and the simplicity. I think a nametag would disrupt that. Should you still want a nametage, I think it could go well on the back of the keyboard, where it is still present, but it would not break up the theme on the top.
I second this as well! Please keep it simple as before!! For colors I would also like to see an elephant gray like from R1 if possible. I think it would go really well with this. And please no RGB lol. Thanks!
Post by: Hedgey on Mon, 21 October 2019, 12:37:59
Raffle it, please. No FCFS, can't compete with checkout bots.
THIS. This 100x's. Everyone gets a fair shot at it. Especially when I see people in this thread who are saying "Do I need a second one?". Woof....
Post by: lolafineday on Mon, 21 October 2019, 13:06:33
Sent from my SM-G975F using Tapatalk
Post by: InvidiousIgnoramus on Mon, 21 October 2019, 15:01:36
"People", being me, and pretty much only me. R1 was an extremely slow seller, and I'm surprised it managed to make MOQ at all. Outside of my all brass unit Ja3soteric and the silver one TaehaTypes assembled, pretty much none of the units have been seen by people. I still have seen relatively little interest in the board, and I'd very much expect you to have plenty of time to pick one up. This is not something that will sell out in minutes.Raffle it, please. No FCFS, can't compete with checkout bots.
THIS. This 100x's. Everyone gets a fair shot at it. Especially when I see people in this thread who are saying "Do I need a second one?". Woof....
Post by: DukeEsquire on Mon, 21 October 2019, 15:08:27
"People", being me, and pretty much only me. R1 was an extremely slow seller, and I'm surprised it managed to make MOQ at all. Outside of my all brass unit Ja3soteric and the silver one TaehaTypes assembled, pretty much none of the units have been seen by people. I still have seen relatively little interest in the board, and I'd very much expect you to have plenty of time to pick one up. This is not something that will sell out in minutes.Raffle it, please. No FCFS, can't compete with checkout bots.
THIS. This 100x's. Everyone gets a fair shot at it. Especially when I see people in this thread who are saying "Do I need a second one?". Woof....
Yes, because it will sell out in seconds.
Post by: Nigolski on Mon, 21 October 2019, 15:13:22
Post by: InvidiousIgnoramus on Mon, 21 October 2019, 15:52:09
No. No, it won't."People", being me, and pretty much only me. R1 was an extremely slow seller, and I'm surprised it managed to make MOQ at all. Outside of my all brass unit Ja3soteric and the silver one TaehaTypes assembled, pretty much none of the units have been seen by people. I still have seen relatively little interest in the board, and I'd very much expect you to have plenty of time to pick one up. This is not something that will sell out in minutes.Raffle it, please. No FCFS, can't compete with checkout bots.
THIS. This 100x's. Everyone gets a fair shot at it. Especially when I see people in this thread who are saying "Do I need a second one?". Woof....
Yes, because it will sell out in seconds.
Post by: JSaintS on Mon, 21 October 2019, 16:11:51
"People", being me, and pretty much only me. R1 was an extremely slow seller, and I'm surprised it managed to make MOQ at all. Outside of my all brass unit Ja3soteric and the silver one TaehaTypes assembled, pretty much none of the units have been seen by people. I still have seen relatively little interest in the board, and I'd very much expect you to have plenty of time to pick one up. This is not something that will sell out in minutes.
1/ The fact R1 sold out slowly doesn't mean this one will - people talking about the board, TaehaTypes' video on it, etc. Those are all things that will make people want this board.
2/ "pretty much none of the units have been seen by people" - that doesn't mean anything, I mean, your sentence. I'll go and assume you mean almost none of the units have been seen in the wild which is a good sign to me since that means that the owners like their board and don't want to let it go.
3/ "I still have seen relatively little interest in the board" - there weren't many boards produced in R1, so not a lot of people post about it, true. That said, people comment and seem to like the board when it's posted/when it appears on stream. I'd like to see what you base your statement on.
Post by: rowie on Mon, 21 October 2019, 16:12:02
Post by: InvidiousIgnoramus on Mon, 21 October 2019, 17:06:57
"People", being me, and pretty much only me. R1 was an extremely slow seller, and I'm surprised it managed to make MOQ at all. Outside of my all brass unit Ja3soteric and the silver one TaehaTypes assembled, pretty much none of the units have been seen by people. I still have seen relatively little interest in the board, and I'd very much expect you to have plenty of time to pick one up. This is not something that will sell out in minutes.
1/ The fact R1 sold out slowly doesn't mean this one will - people talking about the board, TaehaTypes' video on it, etc. Those are all things that will make people want this board.
2/ "pretty much none of the units have been seen by people" - that doesn't mean anything, I mean, your sentence. I'll go and assume you mean almost none of the units have been seen in the wild which is a good sign to me since that means that the owners like their board and don't want to let it go.
3/ "I still have seen relatively little interest in the board" - there weren't many boards produced in R1, so not a lot of people post about it, true. That said, people comment and seem to like the board when it's posted/when it appears on stream. I'd like to see what you base your statement on.
1/ the times it HAS appeared it's been mostly ridiculed by people, because most find the bezels impractically large. Indeed, I needed to make a much taller wrist rest in order to type in mine comfortably at all. It's overall dimensions are quite a lot larger than a TKL, meaning it's a hard sell to anyone actually liking smaller form factor boards. The lack of keys make it less desirable to those who typically use boards of this size.
2/ Yes, I meant seen in the wild. And no, I was NOT referring to for sale. I mean actually seen in person by non-owners. I can't think of a single example that has yet appeared at a Meetup, unless Nathan took his to Seattle this year.
3/ I still don't see enough interest in this board to warrant the idea of it selling out in "seconds", let alone hours. I'm basing my statement off of when I see it posted somewhere. It's too much of a novelty to have large appeal. Even with a 50 unit limit, I don't expect this to sell in the first day.
Post by: ihalatch on Mon, 21 October 2019, 18:34:35
OMG, the elephant! Please, make a white one like in the first run. I'm in.
I think jacky offered MAO for R1, I think e-white would be better in terms of white.
Yes, e-white will be great. Can you also make the plate more recessed into the case so the bottom edges of the caps disappear in the body of the case?
Post by: Rayndalf on Mon, 21 October 2019, 19:39:25
OMG, the elephant! Please, make a white one like in the first run. I'm in.
I think jacky offered MAO for R1, I think e-white would be better in terms of white.
Yes, e-white will be great. Can you also make the plate more recessed into the case so the bottom edges of the caps disappear in the body of the case?
+1 for hiding the edges of the keys
Post by: jacky on Mon, 21 October 2019, 21:04:07
"People", being me, and pretty much only me. R1 was an extremely slow seller, and I'm surprised it managed to make MOQ at all. Outside of my all brass unit Ja3soteric and the silver one TaehaTypes assembled, pretty much none of the units have been seen by people. I still have seen relatively little interest in the board, and I'd very much expect you to have plenty of time to pick one up. This is not something that will sell out in minutes.
1/ The fact R1 sold out slowly doesn't mean this one will - people talking about the board, TaehaTypes' video on it, etc. Those are all things that will make people want this board.
2/ "pretty much none of the units have been seen by people" - that doesn't mean anything, I mean, your sentence. I'll go and assume you mean almost none of the units have been seen in the wild which is a good sign to me since that means that the owners like their board and don't want to let it go.
3/ "I still have seen relatively little interest in the board" - there weren't many boards produced in R1, so not a lot of people post about it, true. That said, people comment and seem to like the board when it's posted/when it appears on stream. I'd like to see what you base your statement on.
1/ the times it HAS appeared it's been mostly ridiculed by people, because most find the bezels impractically large. Indeed, I needed to make a much taller wrist rest in order to type in mine comfortably at all. It's overall dimensions are quite a lot larger than a TKL, meaning it's a hard sell to anyone actually liking smaller form factor boards. The lack of keys make it less desirable to those who typically use boards of this size.
2/ Yes, I meant seen in the wild. And no, I was NOT referring to for sale. I mean actually seen in person by non-owners. I can't think of a single example that has yet appeared at a Meetup, unless Nathan took his to Seattle this year.
3/ I still don't see enough interest in this board to warrant the idea of it selling out in "seconds", let alone hours. I'm basing my statement off of when I see it posted somewhere. It's too much of a novelty to have large appeal. Even with a 50 unit limit, I don't expect this to sell in the first day.
I see ,personally i am not suppose to sale much
whatever this one go but this one should come again since i dont have this too and hope somone who really love it can grap one
that is why i am sale it as 50 untis .
I am new for GB still cant handle big quantity
Post by: jacky on Mon, 21 October 2019, 21:08:50
Looking forward to it!
Sidenote: Are you sure that you want to keep the price at $350? I though I heard that you ended up taking a loss on the first run.
Yes,$350 is fine for me even if it doesn't have enough profit but i know what price people can accept it
thanks :thumb:
Post by: jacky on Mon, 21 October 2019, 21:10:28
Post by: ihalatch on Mon, 21 October 2019, 21:16:21
50 units were my minimum order quantity it doesnt mean i want do limited groupbuy
Oh, I've been waiting for this for a long time. Fingers crossed, I hope to buy one :)
Post by: cijanzen on Mon, 21 October 2019, 21:20:37
50 units were my minimum order quantity it doesnt mean i want do limited groupbuy
Yeah I think a lot of us read this as a limit of 50 units not a MOQ of 50. Can you confirm?
Post by: jacky on Mon, 21 October 2019, 21:23:58
Sure ,MOQ of 50.due to first run not reach it so i have cost much then i expect50 units were my minimum order quantity it doesnt mean i want do limited groupbuy
Yeah I think a lot of us read this as a limit of 50 units not a MOQ of 50. Can you confirm?
Post by: cijanzen on Mon, 21 October 2019, 21:26:31
Sure ,MOQ of 50.due to first run not reach it so i have cost much then i expect50 units were my minimum order quantity it doesnt mean i want do limited groupbuy
Yeah I think a lot of us read this as a limit of 50 units not a MOQ of 50. Can you confirm?
Ah, excellent. I hope we can make it to 50! This community has grown a lot since R1 but we’ll see if people are interested in these giant bezels. I for one love the simple but massive design.
Post by: InvidiousIgnoramus on Mon, 21 October 2019, 21:31:48
I'm gonna say something unpopular, Jacky. Raise the price. I don't want you to have to pay out of pocket like in round 1.Looking forward to it!
Sidenote: Are you sure that you want to keep the price at $350? I though I heard that you ended up taking a loss on the first run.
Yes,$350 is fine for me even if it doesn't have enough profit but i know what price people can accept it
thanks :thumb:
Post by: h9n9n3 on Mon, 21 October 2019, 21:36:04
Post by: skrunk on Mon, 21 October 2019, 21:37:08
Either way, I am interested in the board!
Post by: The_Boom_Boy on Mon, 21 October 2019, 23:18:36
Post by: kanaka_alpaca on Mon, 21 October 2019, 23:28:43
Post by: justinhigley on Mon, 21 October 2019, 23:43:21
Post by: KaosJ on Tue, 22 October 2019, 00:39:44
More details :
1 .Top right corner it have a nametag
2 .cambered surface make this board more unique
3. Left side have RGB curved besides five macros have Rgb curved
4.There was no bottom like ca66 design coz it will make case more higher.
5.8 degree
I don't understand. Is this a list of new things for this round? Do you have any sketches or mockups to show what you mean by RGB curved?
Seems like it is the same list of the first round, in fact idk what he means for nametag (there was no nematag in r1 but that list was the same)
Post by: KaosJ on Tue, 22 October 2019, 00:44:51
My advices:
- Keys more recessed inside the case, so it's just a case design +1 or +2mm in height
- Walls tighter to the caps (slightly, to reduce the gap)
- Maybe make a version of the plate without too many useless holes, most of the people will build it ANSI and prefer no cheese plate (e.g. 2 plates: 1 Universal plate + 1 standard ansi)
- E-white and also DARK PURPLE (not pinky purple)
- Less important than other points, what about custom designs on the weight? (for higher price)
Post by: ihalatch on Tue, 22 October 2019, 01:08:16
I'm totally in!
My advices:
- Keys more recessed inside the case, so it's just a case design +1 or +2mm in height
- Walls tighter to the caps (slightly, to reduce the gap)
- Maybe make a version of the plate without too many useless holes, most of the people will build it ANSI and prefer no cheese plate (e.g. 2 plates: 1 Universal plate + 1 standard ansi)
- E-white and also DARK PURPLE (not pinky purple)
- Less important than other points, what about custom designs on the weight? (for higher price)
Agree with all of the above - imo with bigger cases lower sitting caps are better. I like this board - awesome design.
Post by: simplelifes2 on Tue, 22 October 2019, 01:47:09
Post by: puddingfarmer on Tue, 22 October 2019, 02:46:42
I agree with what's already been said: no name tag, recessed keys.
Post by: hyperdolch on Tue, 22 October 2019, 03:24:12
No nametag plz.
Post by: kmfmppl on Tue, 22 October 2019, 05:07:50
Sure ,MOQ of 50.due to first run not reach it so i have cost much then i expect50 units were my minimum order quantity it doesnt mean i want do limited groupbuy
Yeah I think a lot of us read this as a limit of 50 units not a MOQ of 50. Can you confirm?
this is great news!
Post by: Kerasan on Tue, 22 October 2019, 07:29:17
I'm totally in!
My advices:
- Keys more recessed inside the case, so it's just a case design +1 or +2mm in height
- Walls tighter to the caps (slightly, to reduce the gap)
- Maybe make a version of the plate without too many useless holes, most of the people will build it ANSI and prefer no cheese plate (e.g. 2 plates: 1 Universal plate + 1 standard ansi)
- E-white and also DARK PURPLE (not pinky purple)
- Less important than other points, what about custom designs on the weight? (for higher price)
This... especially the first one
Post by: rpiguy9907 on Tue, 22 October 2019, 12:35:46
I want to know the any channel or mail for joining GB!
https://discord.gg/rBmSHH (https://discord.gg/rBmSHH)
Discord invite no longer works. Says expired :-(
Post by: dr_unconscionable on Wed, 23 October 2019, 00:33:34
I would love a very dark green, dark blue-gray, or dark purple, though the gray and black ones I've seen also look amazing.
I echo what others have said about recessing the keys and tightening gaps if possible!
Post by: ilezia on Wed, 23 October 2019, 02:10:27
Not keen on the name-tag to the corner. Looking at some of the photos I agree that slightly tighter fit would be ideal, but not a deal-breaker for me - just want one of these amazing boards. :thumb:
Post by: jacky on Wed, 23 October 2019, 08:54:05
or provide the new color sample then let`s go
Post by: cijanzen on Wed, 23 October 2019, 08:57:22
Do we need a prototype again for R2?
or provide the new color sample that let`s go
If you’re not making any changes to the design then colour samples would be sufficient but if you’re changing any of the geometry I’d say some form of prototype is a must. Even if that drives up the price a bit. I’d rather pay for the R & D to get a better final product.
Post by: JSaintS on Wed, 23 October 2019, 08:57:50
Do we need a prototype again for R2?
or provide the new color sample that let`s go
it depends on the design changes imo. If you keep the board as is, no name tag or anything, I would just provide the new color samples - if you are just going to change the tolerances, a new proto can be made but is not necessary. If you change more than that, I'd go for a prototype, indeed.
Again, this is just how I feel, others might feel differently.
Post by: jacky on Wed, 23 October 2019, 08:58:45
Oh my goodness yes, I’m so excited to see a second round of this! I’ve been wanting one of these for ages, and will absolutely get one.
I would love a very dark green, dark blue-gray, or dark purple, though the gray and black ones I've seen also look amazing.
I echo what others have said about recessing the keys and tightening gaps if possible!
"I echo what others have said about recessing the keys and tightening gaps if possible!"
what is mean ,i dont unstander it well.
Post by: jacky on Wed, 23 October 2019, 09:00:33
I thinks so . can explain what people say at up floor?Do we need a prototype again for R2?
or provide the new color sample that let`s go
it depends on the design changes imo. If you keep the board as is, no name tag or anything, I would just provide the new color samples - if you are just going to change the tolerances, a new proto can be made but is not necessary. If you change more than that, I'd go for a prototype, indeed.
Again, this is just how I feel, others might feel differently.
Post by: h.parks on Wed, 23 October 2019, 09:00:55
Post by: cijanzen on Wed, 23 October 2019, 09:01:29
Oh my goodness yes, I’m so excited to see a second round of this! I’ve been wanting one of these for ages, and will absolutely get one.
I would love a very dark green, dark blue-gray, or dark purple, though the gray and black ones I've seen also look amazing.
I echo what others have said about recessing the keys and tightening gaps if possible!
"I echo what others have said about recessing the keys and tightening gaps if possible!"
what is mean ,i dont unstander it well.
Having taller walls for the keycaps to sit more flush with the case. So the plate is sunk into the case a bit deeper. Also reducing the gap between the case walls to the keycaps on the horizontal axis. So if you look straight down you don’t see as much of a gap between keycaps and the case walls.
Post by: jacky on Wed, 23 October 2019, 09:11:26
Get it ,i will check suggestion what people post.after that list the changing we need do .Do we need a prototype again for R2?
or provide the new color sample that let`s go
If you’re not making any changes to the design then colour samples would be sufficient but if you’re changing any of the geometry I’d say some form of prototype is a must. Even if that drives up the price a bit. I’d rather pay for the R & D to get a better final product.
Post by: Kerasan on Wed, 23 October 2019, 10:39:21
Oh my goodness yes, I’m so excited to see a second round of this! I’ve been wanting one of these for ages, and will absolutely get one.
I would love a very dark green, dark blue-gray, or dark purple, though the gray and black ones I've seen also look amazing.
I echo what others have said about recessing the keys and tightening gaps if possible!
"I echo what others have said about recessing the keys and tightening gaps if possible!"
what is mean ,i dont unstander it well.
Having taller walls for the keycaps to sit more flush with the case. So the plate is sunk into the case a bit deeper. Also reducing the gap between the case walls to the keycaps on the horizontal axis. So if you look straight down you don’t see as much of a gap between keycaps and the case walls.
yes, I meant this suggestion
for the color I propose a blue like dark solarized,
with the next release of SA dark solarized the matching is endgame imho. :cool:
Post by: mrkantz on Wed, 23 October 2019, 11:30:47
Post by: SeeNoEvo on Wed, 23 October 2019, 17:08:45
Same with the sidewall height. It doesn't need to be recessed further. (pics related)
(https://i.imgur.com/vFihQ5K.jpg)
(https://i.imgur.com/ZqNfETJ.jpg)
Pls relocate the bumps-ons so they aren't over the screws again.
Also consider using daughter board so you can clean up the usb port.
Post by: cijanzen on Wed, 23 October 2019, 17:10:35
The spacing is fine. As it is I can barely fit my puller in those spots.
Same with the sidewall height. It doesn't need to be recessed further. (pics related)Show Image(https://i.imgur.com/vFihQ5K.jpg)Show Image(https://i.imgur.com/ZqNfETJ.jpg)
Pls relocate the bumps-ons so they aren't over the screws again.
Also consider using daughter board so you can clean up the usb port.
Based on those pics I agree that the case design wouldn’t need to change. Looks tight and high-profile enough as it is!
Post by: ihalatch on Wed, 23 October 2019, 18:50:25
The spacing is fine. As it is I can barely fit my puller in those spots.
Same with the sidewall height. It doesn't need to be recessed further. (pics related)Show Image(https://i.imgur.com/vFihQ5K.jpg)Show Image(https://i.imgur.com/ZqNfETJ.jpg)
Pls relocate the bumps-ons so they aren't over the screws again.
Also consider using daughter board so you can clean up the usb port.
Based on those pics I agree that the case design wouldn’t need to change. Looks tight and high-profile enough as it is!
I agree. It looks perfect. Can't wait for this GB. Has any timetable been set yet jacky?
Post by: jacky on Wed, 23 October 2019, 21:20:15
E white `dark purple `dark grey `E black`silver
yesterday get news from factory they can clean the stain on sandblasted stuff so this time we not have pvd ,just go for brass sand
anything else ?
Post by: jacky on Wed, 23 October 2019, 21:31:20
I want to know the any channel or mail for joining GB!
https://discord.gg/rBmSHH (https://discord.gg/rBmSHH)
Discord invite no longer works. Says expired :-(
https://discord.gg/7zcscC updated it
Post by: cijanzen on Wed, 23 October 2019, 22:14:16
Alright,let us get some color sample then move !
E white `dark purple `dark grey `E black`silver
yesterday get news from factory they can clean the stain on sandblasted stuff so this time we not have pvd ,just go for brass sand
anything else ?
Are you considering navy colour like R1?
Post by: GigaFlop on Wed, 23 October 2019, 22:49:14
Post by: jacky on Wed, 23 October 2019, 23:38:20
Expensive, but I was pining for one a while ago. Going to see if I can save enough by the time it goes live...
I hope so too.
Post by: CF73 on Thu, 24 October 2019, 04:15:49
and yeah, no nameplate pls. maybe on the back where it's not visible.
Post by: osamine on Thu, 24 October 2019, 09:19:26
I’ll echo what others have said and vote for no nameplate.
Either way I’ll be picking one up.
Post by: blizzara01 on Thu, 24 October 2019, 13:18:20
Post by: Hedgey on Thu, 24 October 2019, 13:35:04
I think a dark green like a forest green would look amazing.
Post by: yohannes on Fri, 25 October 2019, 04:29:25
Jacky, can you repost your discord channel? it was invalid.I want to know the any channel or mail for joining GB!
https://discord.gg/7zcscC (https://discord.gg/rBmSHH)
Post by: cijanzen on Fri, 25 October 2019, 07:37:44
Jacky, can you repost your discord channel? it was invalid.I want to know the any channel or mail for joining GB!
https://discord.gg/7zcscC (https://discord.gg/rBmSHH)
https://discord.gg/cGF2NNT
Post by: jacky on Sat, 26 October 2019, 05:02:47
Post by: GigaFlop on Sat, 26 October 2019, 11:49:05
Post by: jacky on Sun, 27 October 2019, 08:57:27
Noticed that 2u backspace - Will there be an option for split backspace?Will have .
Post by: jacky on Mon, 28 October 2019, 03:09:02
Groupbuy tmr morning .
Post by: ihalatch on Mon, 28 October 2019, 06:10:14
All sample color finished ,pictures will be post later .
Groupbuy tmr morning .
Can you please provide the link to the GB?
Post by: jacky on Mon, 28 October 2019, 07:29:31
All sample color finished ,pictures will be post later .
Groupbuy tmr morning .
Can you please provide the link to the GB?
Is 29th , sorry that not 28th
Post by: Hedgey on Mon, 28 October 2019, 08:45:22
All sample color finished ,pictures will be post later .
Groupbuy tmr morning .
How long will the GB be open?
Post by: jacky on Mon, 28 October 2019, 08:49:24
A week .All sample color finished ,pictures will be post later .
Groupbuy tmr morning .
How long will the GB be open?
Post by: Hedgey on Mon, 28 October 2019, 11:42:23
Post by: dr_unconscionable on Mon, 28 October 2019, 13:22:41
Post by: Hedgey on Mon, 28 October 2019, 15:46:24
Post by: jacky on Mon, 28 October 2019, 22:54:58
(https://i.imgur.com/mkBbOBL.jpg)
E/black - E/white
silver/grey/dark purple
PCB:
(https://i.imgur.com/Z33UT0W.jpg)
BOX:
(https://i.imgur.com/jvknb1v.jpg)
for brass parts we will do E-clear finishing (Oxidation prevention and stain prevention )
Groubuy open tmr morning.
we keep price for $350 and 100 units (group buy open for a week if we hit 100 first that `s will closed in Advance)
Are you ready for this ?
Post by: InvidiousIgnoramus on Mon, 28 October 2019, 23:06:56
Color sample:Hey Jacky, I'm not gonna be able to get a second one after all. However, would you allow the option to buy just parts? I'd like another PCB and a box, since mine got damaged very badly.Show Image(https://i.imgur.com/mkBbOBL.jpg)
E/black - E/white
silver/grey/dark purple
PCB:Show Image(https://i.imgur.com/Z33UT0W.jpg)
BOX:Show Image(https://i.imgur.com/jvknb1v.jpg)
for brass parts we will do E-clear finishing (Oxidation prevention and stain prevention )
Groubuy open tmr morning.
we keep price for $350 and 100 units (group buy open for a week if we hit 100 first that `s will closed in Advance)
Are you ready for this ?
Post by: ihalatch on Mon, 28 October 2019, 23:20:18
Color sample:Show Image(https://i.imgur.com/mkBbOBL.jpg)
E/black - E/white
silver/grey/dark purple
PCB:Show Image(https://i.imgur.com/Z33UT0W.jpg)
BOX:Show Image(https://i.imgur.com/jvknb1v.jpg)
for brass parts we will do E-clear finishing (Oxidation prevention and stain prevention )
Groubuy open tmr morning.
we keep price for $350 and 100 units (group buy open for a week if we hit 100 first that `s will closed in Advance)
Are you ready for this ?
Absolutely, please publish the GB link. How long will you allow for paying the invoices? I hope you use PayPal.
Post by: jacky on Mon, 28 October 2019, 23:25:23
Certainly.Color sample:Hey Jacky, I'm not gonna be able to get a second one after all. However, would you allow the option to buy just parts? I'd like another PCB and a box, since mine got damaged very badly.Show Image(https://i.imgur.com/mkBbOBL.jpg)
E/black - E/white
silver/grey/dark purple
PCB:Show Image(https://i.imgur.com/Z33UT0W.jpg)
BOX:Show Image(https://i.imgur.com/jvknb1v.jpg)
for brass parts we will do E-clear finishing (Oxidation prevention and stain prevention )
Groubuy open tmr morning.
we keep price for $350 and 100 units (group buy open for a week if we hit 100 first that `s will closed in Advance)
Are you ready for this ?
Post by: eyedrop on Mon, 28 October 2019, 23:36:40
Post by: mrkantz on Mon, 28 October 2019, 23:41:47
Sent from my Pixel 4 XL using Tapatalk
Post by: jacky on Mon, 28 October 2019, 23:53:26
Jacky, are you still offering the right blocker by the arrow key, like the R1?For r2 we only have one layout is right blocker by the arrow key.
Post by: eyedrop on Mon, 28 October 2019, 23:58:20
Jacky, are you still offering the right blocker by the arrow key, like the R1?For r2 we only have one layout is right blocker by the arrow key.
Thank you, excited for S7. :cool:
Post by: KaosJ on Tue, 29 October 2019, 01:16:18
Maybe you have other purple objects to compare ;D
Also:
- No PVD on brass plate and brass weight?
- Brass plate this time is in the base kit?
Post by: Kerasan on Tue, 29 October 2019, 01:39:06
Hey Jacky, do you have any other photo of the purple sample please?
Maybe you have other purple objects to compare ;D
Also:
- No PVD on brass plate and brass weight?
- Brass plate this time is in the base kit?
I think the brass plate will be in the base kit as r1
Post by: jacky on Tue, 29 October 2019, 01:40:23
Hey Jacky, do you have any other photo of the purple sample please?I have no other purple sample
Maybe you have other purple objects to compare ;D
Also:
- No PVD on brass plate and brass weight?
- Brass plate this time is in the base kit?
no pvd finsihing also base kit not have brass
Post by: jacky on Tue, 29 October 2019, 01:47:02
R1 base kit have brass weight not plateHey Jacky, do you have any other photo of the purple sample please?
Maybe you have other purple objects to compare ;D
Also:
- No PVD on brass plate and brass weight?
- Brass plate this time is in the base kit?
I think the brass plate will be in the base kit as r1
Post by: KaosJ on Tue, 29 October 2019, 01:51:16
E-white+ black pvd is awesome
Can you at least give an option to take brass instead of alu (not as an upgrade)?
Post by: ihalatch on Tue, 29 October 2019, 02:00:00
Post by: jacky on Tue, 29 October 2019, 02:16:14
Can you please explain e/white is it glossy or matte?matte
Post by: Hedgey on Tue, 29 October 2019, 07:01:50
Post by: jacky on Tue, 29 October 2019, 09:20:01
Groupbuy link
Post by: Hedgey on Tue, 29 October 2019, 09:21:37
https://geekhack.org/index.php?topic=103148.0 (https://geekhack.org/index.php?topic=103148.0)
Groupbuy link
Not working for me. I assume the Mod team has to approve it?
Post by: jacky on Tue, 29 October 2019, 09:23:36
Wait it .https://geekhack.org/index.php?topic=103148.0 (https://geekhack.org/index.php?topic=103148.0)
Groupbuy link
Not working for me. I assume the Mod team has to approve it?
Post by: HoffmanMyster on Tue, 29 October 2019, 10:13:40