Hi geekhack,
Groupbuy for - Theo60.
This is the first time that I am sharing my personal design.I thought about what would make my perfect keyboard? With a few ideas in
mind, below is some pictures
(https://i.imgur.com/hoqbXVj.jpg)
(https://i.imgur.com/oI1pgWV.jpg)
(https://i.imgur.com/R8pLRE1.jpg)
(https://i.imgur.com/Te2fHlG.jpg)
(https://i.imgur.com/E3ITJMx.jpg)
Some details about this keyboard : (IC:https://geekhack.org/index.php?topic=101403.0 (https://geekhack.org/index.php?topic=101403.0))
Top case : Four kinds of top case https://i.imgur.com/r9OAxPs.png (https://i.imgur.com/r9OAxPs.png) .
(alu/ pc/brass pvd /brass sand finish.You can mix choices,we have brass top and bottom to
choose.)
Default kit:
Aluminum/PC/ top and bottom cases
Aluminum/PC/ plate
QMK PCB with type-C
Aluminum/PC/ bottom
O- rubber (two types), screws, custom box
Price for default kit: $280 excluding PayPal fee and shipping
Solder PCB: add HHKB layout
(https://i.imgur.com/FqN4q7v.png)
Hotswap pcb :
(https://i.imgur.com/dbjUmMs.png)
Alps :
(https://i.imgur.com/oZGzIb5.jpg)
layout 3:
(https://i.imgur.com/SYMPKoB.png)
Mounting. :
(https://i.imgur.com/Akylo03.jpg)
The plate is mounted to the top case with the 'O- rubber '
Do not like "Gasket" mount, we have the 'O-rubber' Cutout,when the 'O-rubber' put on the top & bottom of the case. the plate will
experience a stronger or lighter clamping force.When you type through the plate will get fedback from bottom due to the 'O
-rubber get press .we will provide two types O-rubber for free.
More
(https://i.imgur.com/jjJzRfx.jpg)
Typing test :
Groupbuy open :10th Dec - 15th Dec (30units)
Groupbuy payment :deadline 20th Dec
ETA :early April 2020 shipping cost $45-$50(invoice will send when start shpping)
Are there any examples of the other colors?
Show Image
(https://i.imgur.com/ggpIXpj.jpg)
Thanks! Is the top color "e pink"?
What kind of angle and front height does this board have? I didn't see it in the IC
I would appreciate a side shot to see how it sits on the desk
side view:
Show Image
(https://i.imgur.com/GPEFjyR.jpg)
Have you tried Alps on this prototype? I asked because the switch legs is longer than mx and may touch the bottom case, happened to Leaf60
Hi geekhack,
Groupbuy for - Theo60.
This is the first time that I am sharing my personal design.I thought about what would make my perfect keyboard? With a few ideas in
mind, below is some pictures
Show Image
(https://i.imgur.com/hoqbXVj.jpg)
Show Image
(https://i.imgur.com/oI1pgWV.jpg)
Show Image
(https://i.imgur.com/R8pLRE1.jpg)
Show Image
(https://i.imgur.com/Te2fHlG.jpg)
Show Image
(https://i.imgur.com/E3ITJMx.jpg)
Some details about this keyboard : (IC:https://geekhack.org/index.php?topic=101403.0 (https://geekhack.org/index.php?topic=101403.0))
Top case : Four kinds of top case https://i.imgur.com/r9OAxPs.png (https://i.imgur.com/r9OAxPs.png) .
(alu/ pc/brass pvd /brass sand finish.You can mix choices,we have brass top and bottom to
choose.)
Default kit:
Aluminum/PC/ top and bottom cases
Aluminum/PC/ plate
QMK PCB with type-C
Aluminum/PC/ bottom
O- rubber (two types), screws, custom box
Price for default kit: $280 excluding PayPal fee and shipping
Solder PCB: add HHKB layout
Show Image
(https://i.imgur.com/FqN4q7v.png)
Hotswap pcb :
Show Image
(https://i.imgur.com/dbjUmMs.png)
Alps :
Show Image
(https://i.imgur.com/oZGzIb5.jpg)
layout 3:
Show Image
(https://i.imgur.com/SYMPKoB.png)
Mounting. :
Show Image
(https://i.imgur.com/Akylo03.jpg)
The plate is mounted to the top case with the 'O- rubber '
Do not like "Gasket" mount, we have the 'O-rubber' Cutout,when the 'O-rubber' put on the top & bottom of the case. the plate will
experience a stronger or lighter clamping force.When you type through the plate will get fedback from bottom due to the 'O
-rubber get press .we will provide two types O-rubber for free.
More
Show Image
(https://i.imgur.com/jjJzRfx.jpg)
Typing test :
Groupbuy open :10th Dec - 15th Dec (30units)
Groupbuy payment :deadline 20th Dec
ETA :early April 2020 shipping cost $45-$50(invoice will send when start shpping)
Show Image
(https://i.imgur.com/fFwcru3.jpg)
just got the photos and still work on the top part,will keep update.
Any estimate on shipping?
Show Image
(https://i.imgur.com/Wq4BWu4.jpg)
is still need some time, but once these are completed. the anode will be very fast.will continue to update.any questions please pm me.still thank you all.
Those look great:D any word if the anodizing has started? Just asking because the first post say ETA early April...