This looks like garbage truck.
Sent from my Pixel 4 XL using Tapatalk
Honest question, what does people who use 40% without " ' { } : or ; map it to on their layout?
Honest question, what does people who use 40% without " ' { } : or ; map it to on their layout?
Honest question, what does people who use 40% without " ' { } : or ; map it to on their layout?As a programmer this is what stops me from using 40% - I can handle a lot of functions being hidden behind a layer but not " ' { } ; :
Honest question, what does people who use 40% without " ' { } : or ; map it to on their layout?As a programmer this is what stops me from using 40% - I can handle a lot of functions being hidden behind a layer but not " ' { } ; :
Regardless this keyboard looks amazing! Nice work.
We heard you: we're moving to USB-C! <3 Thanks for the overwhelming response so far!
We heard you: we're moving to USB-C! <3 Thanks for the overwhelming response so far!
Amazing news! Any ideas as far as the timeline goes for the actual GB?
What are the dimensions of the keeb?
No inswitch LED? :x
What are the dimensions of the keeb?
Basically 31x9.5cm. Hope those two pictures help:Show Image(https://i.imgur.com/lag7X98.jpg)Show Image(https://i.imgur.com/Thqfo3M.jpg)
And sorry for the terrible drawing :)
What are the dimensions of the keeb?
Basically 31x9.5cm. Hope those two pictures help:Show Image(https://i.imgur.com/lag7X98.jpg)Show Image(https://i.imgur.com/Thqfo3M.jpg)
And sorry for the terrible drawing :)
Would you guys happen to have the layout for the keyboard? I was hoping to figure out the keycap sizing. I am absolute ass at eyeballing it.
Man the USB-C announcement is definitely awesome news.
Does that impact how soon we may get the gb at all, by any chance?
Also keen on knowing a date; I'll have to figure out what keysets I need to source a 40s kit for as well since I never thought I'd go below 60!
I love this board and am going to be in the buy. In the interest of feedback, the only thing I would change is probably a bit too difficult at this point... but I'm not a fan of the gap between the spacebars and the lights there.
I'd do something like this:Show Image(https://imgur.com/K46xHXn.jpg)
http://www.keyboard-layout-editor.com/#/gists/cd20a56f7c6e00a6aff2c9d0c52c7685
Any updates? Also have the tiniest hope for an Australian vendor!
Oh man that sounds exciting, the stream was interesting.Any updates? Also have the tiniest hope for an Australian vendor!
PCB on the verge of completion.
Is there an EU vendor or just projectkeyboard?
This might just be a me problem, but I'm getting an error with the shipping method? I'm in Hawaii, but it says "There are no shipping methods available for your cart or address." Help?
This might just be a me problem, but I'm getting an error with the shipping method? I'm in Hawaii, but it says "There are no shipping methods available for your cart or address." Help?
+1
This might just be a me problem, but I'm getting an error with the shipping method? I'm in Hawaii, but it says "There are no shipping methods available for your cart or address." Help?
+1
Same issue here. No troubles on shipping anything else in the store though.
Also, can you please post the layout with size of caps? I need to know if i have all keycaps needed
I've been watching IC for a long time and thought its base plate was brass. However, today we checked the vendor to participate in GB and found that it is provided with an aluminum plate and cannot be replaced with brass.Should it be purchased additionally? I am unhappy that I have to buy two plates to choose brass. (It's the IC's maximum of $350, so why did the base plate become aluminum?) And if it's an aluminum plate, does it come in color to match the case? I'd appreciate it if you could give me more accurate data. I tried to participate in it, but it is now pending.
Yeah the GB is live on vendors but no real update here from the OP that it’s live and that the default plate is now aluminium etc - it doesn’t fill me with a lot of confidence.
I trust my local vendor so I assume they’ve got some faith and a bit more communication (maybe that’s some false hope?), but it’d be nice to see it here as well.
Yeah the GB is live on vendors but no real update here from the OP that it’s live and that the default plate is now aluminium etc - it doesn’t fill me with a lot of confidence.
I trust my local vendor so I assume they’ve got some faith and a bit more communication (maybe that’s some false hope?), but it’d be nice to see it here as well.
The default plate should be brass, I am talking with all the vendors to try to iron this out but I will keep you all posted.
Can't speak for OP, but got mine from Project Keyboard. Just checked again after reading your replies and it looks like the page was updated to mention that the kit is shipping with brass.
I've been watching IC for a long time and thought its base plate was brass. However, today we checked the vendor to participate in GB and found that it is provided with an aluminum plate and cannot be replaced with brass.Should it be purchased additionally? I am unhappy that I have to buy two plates to choose brass. (It's the IC's maximum of $350, so why did the base plate become aluminum?) And if it's an aluminum plate, does it come in color to match the case? I'd appreciate it if you could give me more accurate data. I tried to participate in it, but it is now pending.
What vendor did you try to buy it from. We have brass as the default plate, so there must be a misunderstanding. Please let me know and I'll check it for you.
I've been watching IC for a long time and thought its base plate was brass. However, today we checked the vendor to participate in GB and found that it is provided with an aluminum plate and cannot be replaced with brass.Should it be purchased additionally? I am unhappy that I have to buy two plates to choose brass. (It's the IC's maximum of $350, so why did the base plate become aluminum?) And if it's an aluminum plate, does it come in color to match the case? I'd appreciate it if you could give me more accurate data. I tried to participate in it, but it is now pending.
You are right, this was a misunderstanding on my part. If you want yours to come with the brass plate please PM me your order number and I’ll make it right for you. Apologies for the miscommunication.
What vendor did you try to buy it from. We have brass as the default plate, so there must be a misunderstanding. Please let me know and I'll check it for you.
All the vendor I checked are marking it as basic inclusion of aluminum plates. If that's not true, you'd better fix it quickly. (There must be someone who has placed unnecessary additional orders to get hold of brass plates.) After seeing your answer, I checked some vendors again, but they have not been modified. It is marked with aluminum. For example, Project Keyboard, Daily Clark, etc. As far as I've checked, all vendors.
Same here. Ordered from Daily Clack, was going to buy a separate brass plate but held off for a bit.
DC are still showing Aluminium on the product page as the plate material - Will the default actually be brass and vendors might just take some time to update their listing?
Might be best to clarify for anyone ordering different plates and even those who have placed orders. If someone actually did want an Alu plate and it is changed to brass by default they might be upset at the change. I'd welcome the change for my order - I'd much prefer my polycarb with a brass plate like in your build stream video.
Does anyone know which kits typically include the 1.75 enter key that we'll need for this board? Assuming that it's 40's, but this is my first time putting together something in this profile.
Hi ... love this board and ordering either the pc or blue. In your opinion, would the Blue go with either GMK Nord or Hammerhead? If both, which one do you think looks better?
That's odd I'm seeing Aluminum plate for base kit on project keyboardYeah the GB is live on vendors but no real update here from the OP that it’s live and that the default plate is now aluminium etc - it doesn’t fill me with a lot of confidence.
I trust my local vendor so I assume they’ve got some faith and a bit more communication (maybe that’s some false hope?), but it’d be nice to see it here as well.
The default plate should be brass, I am talking with all the vendors to try to iron this out but I will keep you all posted.
Can't speak for OP, but got mine from Project Keyboard. Just checked again after reading your replies and it looks like the page was updated to mention that the kit is shipping with brass.
That's odd I'm seeing Aluminum plate for base kit on project keyboardYeah the GB is live on vendors but no real update here from the OP that it’s live and that the default plate is now aluminium etc - it doesn’t fill me with a lot of confidence.
I trust my local vendor so I assume they’ve got some faith and a bit more communication (maybe that’s some false hope?), but it’d be nice to see it here as well.
The default plate should be brass, I am talking with all the vendors to try to iron this out but I will keep you all posted.
Can't speak for OP, but got mine from Project Keyboard. Just checked again after reading your replies and it looks like the page was updated to mention that the kit is shipping with brass.
That's odd I'm seeing Aluminum plate for base kit on project keyboardYeah the GB is live on vendors but no real update here from the OP that it’s live and that the default plate is now aluminium etc - it doesn’t fill me with a lot of confidence.
I trust my local vendor so I assume they’ve got some faith and a bit more communication (maybe that’s some false hope?), but it’d be nice to see it here as well.
I asked Mr.Keebs on live stream today and he mentioned that he was mistaken and the vendors are correct that it comes with an aluminum switch plate in the base kit.
The default plate should be brass, I am talking with all the vendors to try to iron this out but I will keep you all posted.
Can't speak for OP, but got mine from Project Keyboard. Just checked again after reading your replies and it looks like the page was updated to mention that the kit is shipping with brass.
You're right. I was looking at the mid-section description. Looks like the plate is still listed as ALU.
Beautiful board, but I'll definitely have some trouble choosing between PC and plum. I'm on the edge of jumping in this GB, but I'm somewhat hesitant just looking at the previous replies referencing how the default plate isn't brass on the vendor pages, but Alu instead. Unless there's some clarification/update here or the vendors pages get fixed, I may have to hold off (and I'm sure I'm not the only one). I'd rather not get into a whole mix-up and then have to reach out just to have something fixed that has already been brought up by a bunch of people. Also, no GB page approved by the mods yet?
Beautiful board, but I'll definitely have some trouble choosing between PC and plum. I'm on the edge of jumping in this GB, but I'm somewhat hesitant just looking at the previous replies referencing how the default plate isn't brass on the vendor pages, but Alu instead. Unless there's some clarification/update here or the vendors pages get fixed, I may have to hold off (and I'm sure I'm not the only one). I'd rather not get into a whole mix-up and then have to reach out just to have something fixed that has already been brought up by a bunch of people. Also, no GB page approved by the mods yet?
From what I understood it's just an issue with the website. The default option is brass
Hey there, sorry for all the misinformation. The default kit does come with an aluminum place and brass needs to be added as an extra.
Thanks!
Sharing pretty much the same concern as the the comments before me: ProjectKeyboard (and the other proxies) still state in their description that the default plate is Aluminum. I’m going to reach out to them and confirm if the default plate is actually Brass or not. I’m really hoping that all they have to do is update their description.
I may be a minority but even though I’ll still be purchasing an Elongate, I do want to mention that if there ever is an Elongate R2 in the future, I’d love to see a southpaw numpad and arrow keys configuration. In terms of efficiency, it makes a little bit more sense since it reduces the amount of time that one’s right hand is on and off the mouse, compared to the traditional orthodox numpad + arrow keys configuration. The Clarabelle Keyboard that recently ended its GB comes to mind. If this ever comes to fruition, I’d love to own an R2.
Sharing pretty much the same concern as the the comments before me: ProjectKeyboard (and the other proxies) still state in their description that the default plate is Aluminum. I’m going to reach out to them and confirm if the default plate is actually Brass or not. I’m really hoping that all they have to do is update their description.
I may be a minority but even though I’ll still be purchasing an Elongate, I do want to mention that if there ever is an Elongate R2 in the future, I’d love to see a southpaw numpad and arrow keys configuration. In terms of efficiency, it makes a little bit more sense since it reduces the amount of time that one’s right hand is on and off the mouse, compared to the traditional orthodox numpad + arrow keys configuration. The Clarabelle Keyboard that recently ended its GB comes to mind. If this ever comes to fruition, I’d love to own an R2.