Yes would be interested. Any price range estimate for this?+1
Yes would be interested. Any price range estimate for this?
Yes would be interested. Any price range estimate for this?
Appears most 3D-printed ones are $25 to $30+shipping. This one is CNC milled; it is high quality and has multiple parts. And we also made special packaging for it to make sure it is safe during transportation. Cost is high, so GB price will be a little bit more expensive than 3D printed ones, but won't exceed $35 (with all fees included, excludes shipping). I will try to keep shipping cost low as well with EMS.
im in! I assume most people buying this would have one already but throwing in a switch opener would be a nice touch
Sent from my SM-G985F using Tapatalk
Any chance for an option of 70 or even better 90 switch version? Would be nice to get a full 60% to TKL in there.
Any chance for an option of 70 or even better 90 switch version? Would be nice to get a full 60% to TKL in there.
+1. Would really like to see it made for 70 switches. Getting in a groove and then needing to come back for 10 switches is a bit inconvenient.
Also interested, particularly at support for 70-75 (split backspace and spacebar guy here)
Also, is 10mm sufficient to keep the pins from poking through? Don't have calipers on hand to check
Sent from my SM-N950U using Tapatalk
If the pricepoint is going to be below 50ish, you can definitely count me in :thumb:
Hello friends, May from the Gray Studio has designed and prototyped a premium acrylic switch lubing station. The lubing station has been optimized a few iterations and prototyped to work very nicely with various switches.
We will consider holding a GB on Graystudio.club soon if there is enough interest. Thank you very much for your attention. The cost will be a bit higher than 3D-printed ones but affordable.
Actual product images below:Show Image(https://i.imgur.com/jcNVlf6.jpg)Show Image(https://i.imgur.com/Q9MHCmI.jpg)Show Image(https://i.imgur.com/KTLLad0.jpg)Show Image(https://i.imgur.com/JpCHziG.jpg)Show Image(https://i.imgur.com/aPOuGgT.jpg)Show Image(https://i.imgur.com/dkLTdyP.jpg)
Yes, count me in!
Can we add a pencil to the order , when the GB will start?
Why is this CNC'd and not lasered?
Yes, count me in!
Can we add a pencil to the order , when the GB will start?
Hey what will be the pencil for? Can include a couple of brushes.
GB likely in early June - I will leave it to May to work on it :)
Yes, count me in!
Can we add a pencil to the order , when the GB will start?
Hey what will be the pencil for? Can include a couple of brushes.
GB likely in early June - I will leave it to May to work on it :)
I meant brushes , hahah :thumb:
Yes, count me in!
Can we add a pencil to the order , when the GB will start?
Hey what will be the pencil for? Can include a couple of brushes.
GB likely in early June - I will leave it to May to work on it :)
I meant brushes , hahah :thumb:
a nice brush add on an maybe something to hold a lube pot would be nice either way looks nice keep up the good work.
Yes, count me in!
Can we add a pencil to the order , when the GB will start?
Hey what will be the pencil for? Can include a couple of brushes.
GB likely in early June - I will leave it to May to work on it :)
I meant brushes , hahah :thumb:
a nice brush add on an maybe something to hold a lube pot would be nice either way looks nice keep up the good work.
Seconding on this, something to hold the lube + brush would be a good addition.
I'll throw my hat into the ring for this as well - station looks great though, so I'll be keeping an eye on the progress!Yes, count me in!
Can we add a pencil to the order , when the GB will start?
Hey what will be the pencil for? Can include a couple of brushes.
GB likely in early June - I will leave it to May to work on it :)
I meant brushes , hahah :thumb:
a nice brush add on an maybe something to hold a lube pot would be nice either way looks nice keep up the good work.
Seconding on this, something to hold the lube + brush would be a good addition.
Third this =)
Yes, count me in!
Can we add a pencil to the order , when the GB will start?
Hey what will be the pencil for? Can include a couple of brushes.
GB likely in early June - I will leave it to May to work on it :)
I meant brushes , hahah :thumb:
a nice brush add on an maybe something to hold a lube pot would be nice either way looks nice keep up the good work.
Seconding on this, something to hold the lube + brush would be a good addition.
Yes, count me in!
Can we add a pencil to the order , when the GB will start?
Probably best to make it a kit? 😅
Hey what will be the pencil for? Can include a couple of brushes.
GB likely in early June - I will leave it to May to work on it :)
I meant brushes , hahah :thumb:
a nice brush add on an maybe something to hold a lube pot would be nice either way looks nice keep up the good work.
Seconding on this, something to hold the lube + brush would be a good addition.
You mean a small vial?
Also would love a brush plus vial holder attachment!!
Also would love a brush plus vial holder attachment!!
Not sure how vial holder attachment will look like... :(
But will give two free brushes
Potter’s vpn is down; and I’m just passing info that he said the GB will likely be dropped as soon as tomorrow and be live for a week or so in his Shopify store: graystudio.club
Potter’s vpn is down; and I’m just passing info that he said the GB will likely be dropped as soon as tomorrow and be live for a week or so in his Shopify store: graystudio.club
The only problem with including a lube vial holder is that different vendors package lube differently. Do you really want to re-package your lube into an included vial that fits into a holder on the lubing station? What if the station includes 1-2 vials, but you get a third type of lube? It seems simpler to just leave the lube elsewhere on the table and simplify the lube station to just hold the switches.
Potter’s vpn is down; and I’m just passing info that he said the GB will likely be dropped as soon as tomorrow and be live for a week or so in his Shopify store: graystudio.club
Dang you guys really meant it when you said “GB soon.” I’m super hyped. Any idea what fulfillment time will look like? I was planning on asking a friend to print me a smaller lubing station to kill some of my quarantine time by lubing. This would be a much better option though.
[Update] GB is live for 7 days: https://graystudio.club/products/grays-switch-lubing-station?variant=32447414927460.
Potter’s vpn is down; and I’m just passing info that he said the GB will likely be dropped as soon as tomorrow and be live for a week or so in his Shopify store: graystudio.club
Dang you guys really meant it when you said “GB soon.” I’m super hyped. Any idea what fulfillment time will look like? I was planning on asking a friend to print me a smaller lubing station to kill some of my quarantine time by lubing. This would be a much better option though.
Potter said production will take less than 30 days (maybe even faster), shipping may take 14 business days
Interest, but curious why this lays flat. Back legs for ergonomics? How are people handling this?
Sent from my SM-N960U1 using Tapatalk
Interest, but curious why this lays flat. Back legs for ergonomics? How are people handling this?
Sent from my SM-N960U1 using Tapatalk
Not quite sure what "lays flat" here means...?
Interest, but curious why this lays flat. Back legs for ergonomics? How are people handling this?
Sent from my SM-N960U1 using Tapatalk
Not quite sure what "lays flat" here means...?
I think they were suggesting it be angled rather than level, which I have to disagree with. It would make reassembling switches harder imo. I personally place the spring in the bottom housing, precariously place the slider on the spring, and then sort of lower the top housing into place when I reassemble. I definitely wouldn’t want to do that at like a 7° angle.
This is great! Ordered one. Will make building so much easier moving forward.
Oh man, haven't paid attention for a few days and only just caught this is live!
I'm in for one now!
:thumb:
Mine has been stuck about 15 minutes away from me for almost a week.
It's marked as "TENDERED FOR DELIVERY". Is this normal?