Post by: xondat on Sun, 13 September 2020, 19:18:51
(https://cdn.discordapp.com/attachments/573281277336223744/770414741456814130/image0.jpg)
(https://cdn.discordapp.com/attachments/573281277336223744/770414742309175336/image1.jpg)
(https://cdn.discordapp.com/attachments/551189586215305221/770409229236437002/image0.jpg)
TLDR - Everything looks great apart from a couple minor things noted below.
Going to move the position of the two visible screws by 2/3 and 0/-, these will be moved outwards one key from the middle to 1/2 and -/= so they aren't as visible. Build isn't final as I haven't received the gasket strips yet, so will have more angles of the proto when they arrive. These have just finished production and look great, image below.
(https://cdn.discordapp.com/attachments/551189586215305221/770350970772783114/image0.jpg)
(https://cdn.shopify.com/s/files/1/0071/6377/3043/files/Comp_54086356-0680-4414-94bf-77b4192ec616.jpg?v=1598742797)
Valhalla
An ergo 65%, developed from the ground up. Featuring Noxary DUAL V2 Mount, no visible screws, and a seamless case design, Valhalla is the first in Series 3 - the next generation of Noxary boards.
(https://cdn.shopify.com/s/files/1/0071/6377/3043/products/BG_AngleL_a247224d-f9ca-4093-b0de-df776e34b02d.jpg?v=1598742611)
Mounting
The Noxary DUAL V2 Mount uses custom o-ring shaped strips. They sit both above and below the plate, around the perimeter, to perfectly emulate two large diameter o-rings. The unique shape of the strips enable precise control over plate movement, creating a unique sound & feel.
(https://cdn.shopify.com/s/files/1/0071/6377/3043/products/Silver_AngleR.jpg?v=1598742611)
Layout
Compared to existing ergo options, the distance between the two halves is increased ~150%, whilst the alpha tilt is decreased from 12 degrees to 8. Along with the Noxary LEDGE, which lowers the front height, the typing comfort is improved greatly.
The bottom row features 1.5 - 1 - 1.5 caps on each side, with a 2.75u spacebar on the left, and 2.25u on the right. The 2.75u can be split into 1.75 - 1u, and the 2.25u into 1 - 1.25u. The traditional options of full or split Backspace, and regular or stepped Caps Lock remain.
(https://cdn.shopify.com/s/files/1/0071/6377/3043/products/Green_Top.jpg?v=1598742610)
Design
The design is unmistakably Noxary - a low front & clean side profile. The DUAL Mount is designed not only to produce a unique typing experience, but also to hide any screws on the outside. The front corners made by tilting the alphas have been curved too. These four elements combined creates the signature aesthetic.
(https://cdn.shopify.com/s/files/1/0071/6377/3043/products/BG.jpg?v=1598742611)
Connection
The PCB is designed by Gondolindrim, and has been kept simple. Switches must be soldered as this provides the best overall typing experience, and there are no in-switch LEDs. The physical layout options have been kept to a minimum, and can be fully programmed through VIA firmware. A USB-C daughterboard is centrally located between the two alpha halves.
(https://cdn.shopify.com/s/files/1/0071/6377/3043/products/Silver_USB.jpg?v=1598742611)
Valhalla
An ergo 65%, developed from the ground up. Featuring Noxary DUAL V2 Mount, no visible screws, and a seamless case design, Valhalla is the first in Series 3 - the next generation of Noxary boards.
(https://cdn.shopify.com/s/files/1/0071/6377/3043/products/BG_AngleL_a247224d-f9ca-4093-b0de-df776e34b02d.jpg?v=1598742611)
Mounting
The Noxary DUAL V2 Mount uses custom o-ring shaped strips. They sit both above and below the plate, around the perimeter, to perfectly emulate two large diameter o-rings. The unique shape of the strips enable precise control over plate movement, creating a unique sound & feel.
(https://cdn.shopify.com/s/files/1/0071/6377/3043/products/Silver_AngleR.jpg?v=1598742611)
Layout
Compared to existing ergo options, the distance between the two halves is increased ~150%, whilst the alpha tilt is decreased from 12 degrees to 8. Along with the Noxary LEDGE, which lowers the front height, the typing comfort is improved greatly.
The bottom row features 1.5 - 1 - 1.5 caps on each side, with a 2.75u spacebar on the left, and 2.25u on the right. The 2.75u can be split into 1.75 - 1u, and the 2.25u into 1 - 1.25u. The traditional options of full or split Backspace, and regular or stepped Caps Lock remain.
(https://cdn.shopify.com/s/files/1/0071/6377/3043/products/Green_Top.jpg?v=1598742610)
Design
The design is unmistakably Noxary - a low front & clean side profile. The DUAL Mount is designed not only to produce a unique typing experience, but also to hide any screws on the outside. The front corners made by tilting the alphas have been curved too. These four elements combined creates the signature aesthetic.
(https://cdn.shopify.com/s/files/1/0071/6377/3043/products/BG.jpg?v=1598742611)
Connection
The PCB is designed by Gondolindrim, and has been kept simple. Switches must be soldered as this provides the best overall typing experience, and there are no in-switch LEDs. The physical layout options have been kept to a minimum, and can be fully programmed through VIA firmware. A USB-C daughterboard is centrally located between the two alpha halves.
(https://cdn.shopify.com/s/files/1/0071/6377/3043/products/Silver_USB.jpg?v=1598742611)
Anodizing Colors & Plates
Anodizing Colors:
- Blue Gray
- Lightning Silver
- Irish Green
- Aluminum (Anodized Lightning Silver)
- Brass (Sandblasted & Clear Coated)
- Polycarbonate (Frosted White)
Specification:
- Ergo 65% with 8° Alpha Tilt
- DUAL V2 Mount
- Screwless Exterior
- Seamless Case Design
- 7° Base Angle
- 15.5mm Front Height ft. LEDGE
- USB C Daughterboard
- 1 x Top ( Aluminum)
- 1 x Base (Aluminum)
- 1 x Plate (Aluminum [1.5mm] or Brass [1.5mm] or Polycarbonate [Thickness TBC])
- 1 x Main PCB
- 1 x Daughterboard PCB
- 1 x PCB Cable
- 10 x DUAL V2 Strips
- 7 x M2 Hex Screws
- 4 x Custom Rubber Feet
The prototype is currently on order, and is expected to be received early-mid October. The units will be sold via preorder on noxary.co (https://noxary.co/products/valhalla) via FCFS. The date and time will be announced once the prototype is built. The price will be confirmed within the next 2 weeks, however it is expected to be ~$500. There will be 75 units available for preorder, with no extras being available afterwards. Lead time will be 6 months from preorder closure to delivery.
Further Links:
- Valhalla Showcase (https://noxary.co/valhalla)
- Valhalla Product Page (https://noxary.co/products/valhalla)
- Discord (https://discord.gg/M6zDJ5b)
- Instagram (https://instagram.com/noxary)
Post by: OtherAndrew on Sun, 13 September 2020, 19:19:50
Post by: Gondolindrim on Sun, 13 September 2020, 19:19:56
Post by: phat schlong on Sun, 13 September 2020, 19:19:58
Post by: lac29 on Sun, 13 September 2020, 19:20:14
Post by: bisoromi on Sun, 13 September 2020, 19:20:25
Post by: 002_GT on Sun, 13 September 2020, 19:21:04
Post by: superdoedoe on Sun, 13 September 2020, 19:21:12
Sent from my SM-G970F using Tapatalk
Post by: Micoo on Sun, 13 September 2020, 19:22:16
Post by: Tonkatonk on Sun, 13 September 2020, 19:22:19
Post by: perryhuynh on Sun, 13 September 2020, 19:23:31
Post by: noricon on Sun, 13 September 2020, 19:26:52
Post by: Zeelobby on Sun, 13 September 2020, 19:27:21
Post by: SnowyMinion on Sun, 13 September 2020, 19:27:51
Post by: Midori on Sun, 13 September 2020, 19:28:29
Post by: alwayswarren on Sun, 13 September 2020, 19:28:41
Post by: of_sam on Sun, 13 September 2020, 19:29:20
Post by: SirShakes on Sun, 13 September 2020, 19:29:38
Post by: whitemamba on Sun, 13 September 2020, 19:30:02
Post by: Lulzthax_ on Sun, 13 September 2020, 19:31:08
Post by: hineybush on Sun, 13 September 2020, 19:35:08
Post by: Tree_ on Sun, 13 September 2020, 19:49:12
nicenice
Post by: skrunk on Sun, 13 September 2020, 20:13:12
Post by: soloplayer on Sun, 13 September 2020, 21:23:45
but this is good enough. count me in ;D
Post by: megaforce on Sun, 13 September 2020, 21:48:45
Post by: o3okevin on Sun, 13 September 2020, 22:40:23
Post by: samanth on Sun, 13 September 2020, 22:51:09
Post by: zoo on Mon, 14 September 2020, 10:18:41
Saw the product page linked in discord first, and the featured details are so thoughtfully done
Post by: Ramen Champ on Mon, 14 September 2020, 11:01:12
Post by: chriszhu on Mon, 14 September 2020, 11:22:00
Post by: super_tu on Mon, 14 September 2020, 11:24:14
Post by: Dafraz117 on Mon, 14 September 2020, 11:29:07
Sent from my iPhone using Tapatalk
Post by: dantambok on Mon, 14 September 2020, 12:02:19
Post by: leandrovega on Mon, 14 September 2020, 14:11:32
Post by: juaninamilli on Mon, 14 September 2020, 14:11:50
Post by: xondat on Mon, 14 September 2020, 15:20:27
I generally think "ergo" alice boards with arrow keys often looks off balanced - but this one seems well done with the implementation of the close nav cluster on the right. Quite beautiful, as always, Xondat!
I agree, none of them satisfied me so I did it myself. No regrets spending months on the layout :p
Post by: stoffelduss on Mon, 14 September 2020, 15:33:08
Post by: MoarCoffeePlzzz on Mon, 14 September 2020, 18:33:31
Post by: holer on Tue, 15 September 2020, 04:39:00
Does the PCB (and plate) support split L-Shift (2.25 to 1.25 + 1)? If it doesn't then please consider adding it <3
Post by: MyManMart on Tue, 15 September 2020, 05:57:54
Post by: xondat on Tue, 15 September 2020, 11:26:10
Looks fantastic!!
Does the PCB (and plate) support split L-Shift (2.25 to 1.25 + 1)? If it doesn't then please consider adding it <3
Absolutely!
Quote
The bottom row features 1.5 - 1 - 1.5 caps on each side, with a 2.75u spacebar on the left, and 2.25u on the right. The 2.75u can be split into 1.75 - 1u, and the 2.25u into 1 - 1.25u. The traditional options of full or split Backspace, and regular or stepped Caps Lock remain.
Personally I'll be keeping the spacebars full width, but I know there is a good portion of people that want the extra key or two there :)
Post by: Zurg Eon on Tue, 15 September 2020, 15:02:43
Post by: holer on Tue, 15 September 2020, 16:43:02
Looks fantastic!!
Does the PCB (and plate) support split L-Shift (2.25 to 1.25 + 1)? If it doesn't then please consider adding it <3
Absolutely!
:-* :-* :-*
Post by: johnnysstash on Tue, 15 September 2020, 21:31:45
Post by: noorejji on Wed, 16 September 2020, 03:07:49
Post by: xondat on Wed, 16 September 2020, 11:14:42
You forgot to add that render you made with Nautilus Nightmares.
The only person that's completed renders with this keyboard is Janglad, and they're all present here :confused:
Post by: FilthyMike720 on Wed, 16 September 2020, 18:14:47
Post by: baksbaks on Wed, 16 September 2020, 22:44:34
Post by: lemmebuildthings on Mon, 21 September 2020, 16:28:24
Post by: xondat on Fri, 25 September 2020, 06:30:40
I've updated the OP with this info and am happy to answer any questions :)
Post by: dtywill on Fri, 25 September 2020, 15:06:29
Post by: dakatisshort on Sat, 26 September 2020, 15:16:09
Post by: ligongduck on Sun, 27 September 2020, 13:44:29
Post by: SherlockBunny on Wed, 30 September 2020, 08:12:26
Considering a hot-swap option? This is the perfect board for me I just don't solder I'm too much of a switch ****!
Definitely agree. Please make hotswap PCB a reality with this board!
Post by: xondat on Fri, 09 October 2020, 00:44:48
Considering a hot-swap option? This is the perfect board for me I just don't solder I'm too much of a switch ****!
Definitely agree. Please make hotswap PCB a reality with this board!
Sorry, there won't be a hotswap version, at least not for this round. :'(
Post by: dtywill on Fri, 09 October 2020, 09:54:17
No worries! I bought a Practice65 to practice soldering and it was a breezeConsidering a hot-swap option? This is the perfect board for me I just don't solder I'm too much of a switch ****!
Definitely agree. Please make hotswap PCB a reality with this board!
Sorry, there won't be a hotswap version, at least not for this round. :'(
Sent from my iPhone using Tapatalk
Post by: zedbraxmen on Tue, 13 October 2020, 10:59:44
Post by: xondat on Tue, 27 October 2020, 01:17:52
(https://cdn.discordapp.com/attachments/573281277336223744/770414741456814130/image0.jpg)
(https://cdn.discordapp.com/attachments/573281277336223744/770414742309175336/image1.jpg)
(https://cdn.discordapp.com/attachments/551189586215305221/770409229236437002/image0.jpg)
TLDR - Everything looks great apart from a couple minor things noted below.
Going to move the position of the two visible screws by 2/3 and 0/-, these will be moved outwards one key from the middle to 1/2 and -/= so they aren't as visible. Build isn't final as I haven't received the gasket strips yet, so will have more angles of the proto when they arrive. These have just finished production and look great, image below.
(https://cdn.discordapp.com/attachments/551189586215305221/770350970772783114/image0.jpg)