geekhack

geekhack Marketplace => Group Buys and Preorders => Topic started by: fluxlab on Tue, 20 October 2020, 14:09:02

Title: [GB] Zplit (40% split) - Shipping
Post by: fluxlab on Tue, 20 October 2020, 14:09:02
[attach=1]
Hey all!

Orders will be shipped out in the next two weeks

Discord for updates: https://discord.gg/ngQMCMBKjw



Case Options:
HiPro - $150
LoPro - $120
Sandwich - $65
PCB Only - $50

Plate Options:
Aluminum - $20
POM - $20
Brass - $30
FR-4 - $10

Cables not included

Shipping:
All orders are shipped from Canada. Customs and duties may apply and will not be covered in the price.

Prototype Images:
[attach=2][attach=3][attach=4]
[attach=5][attach=6][attach=7]

Renders:
[attach=8][attach=9]
[attach=10][attach=11]

Terms and Conditions:
This is a group buy. Units have not been produced yet and shipping delays may occur.
There is no MOQ for the group buy.
All orders are final and refunds are not allowed.

Additional notes:
If you require any build services, you can contact me on instagram @flxlb and I will arrange something for you.

Order here: flxlb.ca (http://flxlb.ca/zplit/configurator.html)

Website: flxlb.ca (http://flxlb.ca)
Instagram: @flxlb (http://instagram.com/flxlb)

Thanks,
Jason @ fluxlab
Title: Re: [GB] Zplit (40% split) - Ends Nov 6
Post by: distracteddev on Tue, 20 October 2020, 15:30:10
No white? Sad, but still an amazing board. Will likely pick one up since I can't pass up the chance to avoid customs as I'm in Canada.

Still trying to decide if I can live without a thumb cluster. Part of me feels it does more harm than good, at least on the ergodox.
Title: Re: [GB] Zplit (40% split) - Ends Nov 6
Post by: fluxlab on Tue, 20 October 2020, 15:33:27
Quote from: distracteddev on Tue, 20 October 2020, 15:30:10
No white? Sad, but still an amazing board. Will likely pick one up since I can't pass up the chance to avoid customs as I'm in Canada.

Still trying to decide if I can live without a thumb cluster. Part of me feels it does more harm than good, at least on the ergodox.

Unfortunately, no. I didn’t realize there was so much hype for e-white cases when I started this so I just went with anodized aluminum.
Title: Re: [GB] Zplit (40% split) - Ends Nov 6
Post by: distracteddev on Fri, 23 October 2020, 14:59:00
Thanks for the reply!

Any chance you have proto images of the dark or light grey finishes?

Thanks again, definitely going to pick this up. Just having a hard time picking the case
Title: Re: [GB] Zplit (40% split) - Ends Nov 6
Post by: fluxlab on Fri, 23 October 2020, 18:52:17
Quote from: distracteddev on Fri, 23 October 2020, 14:59:00
Thanks for the reply!

Any chance you have proto images of the dark or light grey finishes?

Thanks again, definitely going to pick this up. Just having a hard time picking the case

i didnt make any machined prototypes, so i dont have the exact colors. the silver is just clear anodization so it will be the same as any clear anodized aluminum. the dark grey will be a space grey similar to apples space grey products. sorry i dont have any prototype images but hope that helps!
Title: Re: [GB] Zplit (40% split) - Ends Nov 6
Post by: stoffelduss on Mon, 26 October 2020, 11:00:26
just found this! ok so 2 questions about the lo-pro, in this thread this version is listed as 100$ but on the store page it's 120$, which one is correct? and can I use regular mx-style switches for the lo-pro or only real lo-pro switches? and which angle does the case of the high-pro have?
Title: Re: [GB] Zplit (40% split) - Ends Nov 6
Post by: fluxlab on Mon, 26 October 2020, 11:06:33
Quote from: stoffelduss on Mon, 26 October 2020, 11:00:26
just found this! ok so 2 questions about the lo-pro, in this thread this version is listed as 100$ but on the store page it's 120$, which one is correct? and can I use regular mx-style switches for the lo-pro or only real lo-pro switches? and which angle does the case of the high-pro have?

hey, sorry about the confusion, but 120 is correct. i made a mistake in this thread.

the lopro case is too thin for regular mx switches, so it will only support low profile switches.

the hipro has a 4.5 degree angle
Title: Re: [GB] Zplit (40% split) - Ends Nov 6
Post by: Kokaloo on Mon, 29 March 2021, 18:08:31
Any updates?
Title: Re: [GB] Zplit (40% split) - Ends Nov 6
Post by: fluxlab on Mon, 29 March 2021, 22:59:02
Quote from: Kokaloo on Mon, 29 March 2021, 18:08:31
Any updates?

just started shipping them out!
Title: Re: [GB] Zplit (40% split) - Shipping
Post by: vonCheerios on Tue, 30 March 2021, 20:04:02
I see you are still taking orders on your site. How many units are left, or is this a mistake?
Thanks!
Title: Re: [GB] Zplit (40% split) - Shipping
Post by: fluxlab on Tue, 30 March 2021, 20:07:10
Quote from: vonCheerios on Tue, 30 March 2021, 20:04:02
I see you are still taking orders on your site. How many units are left, or is this a mistake?
Thanks!

the site only allows you to add to cart but not place any actual orders. there’ll be a few extras for sale after i ship everything though!
Title: Re: [GB] Zplit (40% split) - Shipping
Post by: vonCheerios on Wed, 31 March 2021, 21:49:01
Nice, looking forward to it! I'm into this.. =)
Can I get on a list to be notified when available? I'd hate to miss the extras.
Thanks!!
Title: Re: [GB] Zplit (40% split) - Shipping
Post by: fluxlab on Wed, 31 March 2021, 21:51:32
Quote from: vonCheerios on Wed, 31 March 2021, 21:49:01
Nice, looking forward to it! I'm into this.. =)
Can I get on a list to be notified when available? I'd hate to miss the extras.
Thanks!!

sure! you can join the discord. i just updated the original post with the link!
Title: Re: [GB] Zplit (40% split) - Shipping
Post by: Jirennor on Sat, 24 April 2021, 02:57:27
Could you update the Discord link? The current invite seems to be expired.
Title: Re: [GB] Zplit (40% split) - Shipping
Post by: matthewdias on Sun, 21 November 2021, 13:35:14
Any chance we could get the plate files posted? Would rather not have to reverse engineer

Sent from my Pixel 5 using Tapatalk

Title: Re: [GB] Zplit (40% split) - Shipping
Post by: Qeeke Studio™ on Mon, 22 November 2021, 21:36:08
Where to buy this keycap