Looks great, form submitted!
Wasn't a huge fan of your Raindrop board. I like this off first glance. Price looks alright and I like the layout. Will keep an eye out. Not a fan of the gold.
Looks good, agreed about the gold color - not a fan. Will look forward on the plate design.
Filled in the form!
If hotswap option is possible for the standard layout and a White color with Grey bottom, I'm in :thumb:
Looks good, agreed about the gold color - not a fan. Will look forward on the plate design.
Thanks for the feedback! What colored top would you like to see?
Looks promising. If you can deliver at that price, I think this should be pretty successful.
The gold top looks a little odd, but may look a lot better in person. I'll check back when you have a prototype to share.
To balance things out a bit... Huge fan of the gold. Especially paired with a silver base.
This looks good. Hopefully this becomes available soon.
Hopefully soon and in stock purchase, too much options shouldn't be an issue, i mean else would you want for a numpad.
This looks good. Hopefully this becomes available soon.
Hopefully soon and in stock purchase, too much options shouldn't be an issue, i mean else would you want for a numpad.
Thanks :D We are looking to have our prototyping completed in the next month. Currently, we are considering offering an in stock option (~50 peices) of the most popular colorway, alongside a GB for all popular colorways from the feedback form.
Reserved! I'm personally a fan of the monochrome one, but a white version would be really nice as well. Do you plan on having different colors for the encoder or just the rendered color?We have ordered a selection of 6 different high quality knobs, 3 silver and 3 black, some blank on top, some with an arrow and some with a line. Based on this we will get feedback from the community and offer a single black and a single silver option.
You definitely have my attention. Form submitted. I’ve wanted a good number pad for a while. The rotary encoder, gasket mount, VIA, and design definitely interest me. I’m excited to see a prototype. Regarding hotswap, since it would prohibit multiple layouts, I’d prefer solderable PCBs as standard with the kit to keep the cost down if having multiple layouts supported is a priority. That being said, since I would do a standard num pad layout, I’d like to at least have the option for a standard layout plate to avoid extra holes/gaps, even if it costs more. A bit contradictory, I know, but it’s how I feel.
VIA would be incredible. Tbh I don’t understand the process of developing VIA compatibility, but I own a few boards pre-flashed with VIA compatible firmware and my god is it convenient.
Regarding the encoder knob, I prefer the idea of a blank top. Without a scale or hard stops, an indicator line or arrow doesn’t really make sense IMO. I do like the idea of knurling or ridges or something on the side though as rendered.
Regarding color, I’m easy. If the idea doesn’t offend you, I’d probably have the case sandblasted and cerakoted to match whatever key set I end up putting on it. As for the design, I like the top. Wouldn’t mind seeing a render with fillets, but the chamfer is nice. I’m not as big a fan of the bottom design. Between the screw holes, bumpons, and your logo, there’s a lot of ‘dots’ for lack of a better word. I’d personally prefer a blank bottom but understand wanting your logo on it, as I would if I were you. I’d suggest smaller and off center toward the bottom rather than in the center.
Anyway, sorry for the rant. Happy holidays! I’m excited for this!
I know now where to put my 2 Sirius. ;DPerfect! I've got my two scout troopers lined up 😁
Looks great, ++interested in hotswap availability - if offered I'd be a sure buyer.
I think the price and design are on point, excited to see the prototype.
I want this, but I'm not sure about the knob placement. For a right handed person, won't whole hand sit on keycaps all the time, not trying to push any of it while using the knob?
Interested in white as well and dig the knob placement. I like to change switches often, since multi-layout hotswap PCB is becoming a thing splitting enter/plus keys wouldn't be a bad idea if there's enough interest. I'm still using stacked acrylic numpad so MACRO-1 might be the right choice. Good luck, looking forward to it.White has been very popular, thankyou for the feedback and support :D ! We have played around with the idea of offering multiple hotswap layouts on the one PCB, however there are overlaps between the 2u stabelizer holes and the 1u hotswap socket, see below image.
I feel like this is more numpad than macro pad right? I was confused for a sec when I saw "MACRO" and didn't see a macro pad.
I am very interested in this, will it require soldering, or do we just put it together with screws?
I want this, but I'm not sure about the knob placement. For a right handed person, won't whole hand sit on keycaps all the time, not trying to push any of it while using the knob?
To us, it felt more natural and ergonomic to have the knob on the left and control the encoder with your index and thumb whilst supporting your hand with your pinky and ring finger on the sides of the case. Looking at other projects, I would say at a rough estimate, 70% of macropads have followed this same logic. We are however still in the prototyping phase, so if the feedback that we get back from testers is that it feels unatural, we may change it. Thanks for your input! :)
From 99 USD to 175 USD?!
Unfortunately that's too expensive for me. :(
Good luck anyway.
From 99 USD to 175 USD?!
Unfortunately that's too expensive for me. :(
Good luck anyway.
Obviously I’d love it if it were cheaper, but I’m still interested if $175 or below. It may be less of a guaranteed buy for me though, more dependent on my finances at the time of GB. I wouldn’t mind paring pcb options down to one solderable option rather than including hot swap option(s), but I realize not everyone may feel that way. Best of luck with the prototypes! Can’t wait to see them!
I'm really excited about this macro pad. I've used a Corsair K70 for a long time, the volume wheel above the numpad is an amazing feature that I miss on other boards. I need a numpad for my work, but most of the options out there for custom boards skip numpads, let alone a rotary encoder. If I get one of these I could get a TKL to go along with it and I'll be fully functional, count me in!!!
I also programmed one of the top macro buttons to open the calculator which is so much more usefull than I could of imagined :D
Raindrop colorway with GMK Rudy would be sick!
Is that a 25mm knob?
Will the plate files be available after the GB ends? Would like to try the Macropad with a CF or PC plate.
I am so hyped for this. Will it only be purchasable through your shop, or is there a chance for a european vendor?
Any idea when the GB will launch?I am so hyped for this. Will it only be purchasable through your shop, or is there a chance for a european vendor?
Glad to hear it! This one will be available through lanewareperipherals.com only, the less expensive product didn't make sense for us to take on a European Vendor this time.
Planning on 3-4 weeks from now, the exact time will be released 2 weeks prior to the GBAny idea when the GB will launch?I am so hyped for this. Will it only be purchasable through your shop, or is there a chance for a european vendor?
Glad to hear it! This one will be available through lanewareperipherals.com only, the less expensive product didn't make sense for us to take on a European Vendor this time.
Any possibility of getting a USB-C passthrough on this so I can daisy chain it to my keyboard?I've had this suggestion a few times and I'm considering it 😁👍
Any possibility of getting a USB-C passthrough on this so I can daisy chain it to my keyboard?I've had this suggestion a few times and I'm considering it
Would this run unlimited for the duration of the GB?We are currently planning to limit it to 500 units due to our in house resources when it comes to QC and shipping. If there is significantly more demand then we will extend the limit and bring on more resources to meet demand.
I'm so excited for this that I could explode.
The case prototype images look gorgeous but I can't tell which colorways they are supposed to match up with because of the sheen in the photos.
If you have final color samples ready can you post a photo with callouts for each colorway so it's more obvious which one is which?
In particular I'm not seeing the deep blue from the Raindrop anywhere. I think the images on the first page are supposed to be Raindrop but I want to be sure.
(The different shade of blue isn't a deal breaker, I just want to be sure I know which color to order when the group buy goes live!)
Hi, all of the prototype photos are in the dark grey colorway. The prototypes were made to prove the dimensional and ergonomical aspects of the MACRO-1. The MACRO-1 will be made in the same factory as the Rainrop 60% and in the same Pantone colors, so verification of the specific colors is not nessecary. I hope this clears things up :D