Looks fine from what I see, although I would change the lighting of the renders. Looks like a flashbang rnthank you !
why is it 270? has no weight, looks like it would be less than 150 to machineIm not sure on the price yet, i put that price so i could see what other people would value it as. thank you for your input though
why is it 270? has no weight, looks like it would be less than 150 to machine
why is it 270? has no weight, looks like it would be less than 150 to machineIm not sure on the price yet, i put that price so i could see what other people would value it as. thank you for your input though
he just lowered the price to 200, maybe im right?
Do you have a prototype? I'm curious to know what alu, color options, typing angle, width, height, front height, weight of the board. As well as if those proposed mounting points actually feel good. Because right now I'm skeptical to say the least. The renders need to be updated, they're too bright and the metal texture used is not helping with the scene.I have a 3d printed prototype coming in on the 7th.. it will be followed by an aluminum one.
why is it 270? has no weight, looks like it would be less than 150 to machine
what a waste of a comment. if a board costs $150 to machine , you'd probably pay near $300 or more because you have to factory in the cost of shipping, pcbs, plates, extras, profit margin, etc. unless he's producing this in large qtys, which I'm guessing he's not, then 270 is lower than expected. even though it doesn't look like it would sell a huge amount of units anyway. where did these price warriors show up from, especially with random nonsense estimates..why is it 270? has no weight, looks like it would be less than 150 to machineIm not sure on the price yet, i put that price so i could see what other people would value it as. thank you for your input though
So did you get actual prices from the factory yet? unless you're going to sell hundreds of these, you will probably have to charge more than $270.
why is it 270? has no weight, looks like it would be less than 150 to machine
what a waste of a comment. if a board costs $150 to machine , you'd probably pay near $300 or more because you have to factory in the cost of shipping, pcbs, plates, extras, profit margin, etc. unless he's producing this in large qtys, which I'm guessing he's not, then 270 is lower than expected. even though it doesn't look like it would sell a huge amount of units anyway. where did these price warriors show up from, especially with random nonsense estimates..why is it 270? has no weight, looks like it would be less than 150 to machineIm not sure on the price yet, i put that price so i could see what other people would value it as. thank you for your input though
So did you get actual prices from the factory yet? unless you're going to sell hundreds of these, you will probably have to charge more than $270.
he lowered price to 200, he isnt including a pcb. its literally just a case and plate, i dont think thats worth 270.
why is it 270? has no weight, looks like it would be less than 150 to machine
what a waste of a comment. if a board costs $150 to machine , you'd probably pay near $300 or more because you have to factory in the cost of shipping, pcbs, plates, extras, profit margin, etc. unless he's producing this in large qtys, which I'm guessing he's not, then 270 is lower than expected. even though it doesn't look like it would sell a huge amount of units anyway. where did these price warriors show up from, especially with random nonsense estimates..why is it 270? has no weight, looks like it would be less than 150 to machineIm not sure on the price yet, i put that price so i could see what other people would value it as. thank you for your input though
So did you get actual prices from the factory yet? unless you're going to sell hundreds of these, you will probably have to charge more than $270.
he lowered price to 200, he isnt including a pcb. its literally just a case and plate, i dont think thats worth 270.
that definitely changes things,but still, if the case costs 150 to machine, how on earth can he sell them for 200? I don't think this IC is reassuring at all.
150 + import taxes + extra cases + hardware + shipping will probably already make it cost 200 for himself. there's no way I'd expect this to work out with his estimate.
Very sleek, I like the extra with the blocker cutouts.thank you !
Maybe, just maybe the hobby is not all about making profit. Just an after thought. The op probably just wasnt to share a design that they came up with. Sure there are areas in the IC that can be polished but assuming that someone is designing a keyboard with the intent to make profit and only that seems wrong. Just my two cents.why is it 270? has no weight, looks like it would be less than 150 to machine
what a waste of a comment. if a board costs $150 to machine , you'd probably pay near $300 or more because you have to factory in the cost of shipping, pcbs, plates, extras, profit margin, etc. unless he's producing this in large qtys, which I'm guessing he's not, then 270 is lower than expected. even though it doesn't look like it would sell a huge amount of units anyway. where did these price warriors show up from, especially with random nonsense estimates..why is it 270? has no weight, looks like it would be less than 150 to machineIm not sure on the price yet, i put that price so i could see what other people would value it as. thank you for your input though
So did you get actual prices from the factory yet? unless you're going to sell hundreds of these, you will probably have to charge more than $270.
he lowered price to 200, he isnt including a pcb. its literally just a case and plate, i dont think thats worth 270.
that definitely changes things,but still, if the case costs 150 to machine, how on earth can he sell them for 200? I don't think this IC is reassuring at all.
150 + import taxes + extra cases + hardware + shipping will probably already make it cost 200 for himself. there's no way I'd expect this to work out with his estimate.
nice idea ;)
please, reconsider the two rectangle than hold the plate.
they are really expensive to machine.
and i don't get the advantage.