geekhack
geekhack Marketplace => Interest Checks => Topic started by: LifeZ on Sat, 07 May 2022, 07:07:20
-
Hello Everyone,
LZ REs [FCFS]
Remaster 2nd.
- 1st : XE
This is a remastered version of RE.
(It's a different concept from RE
and I don't re-produce designs of the same layout.never once.
This is my rule and a courtesy to past owners of my keyboard.)
[Layout]
Winkeyless n winkey
ANSI n ISO
[Layout]
ANSI & ISO
Winley
Winkeyless
[Spec.]
- Aluminum case(Top+Bottom)
- Brass weight block
- 7 deg angled
- Switch plate : Alu, PC, Carbon and FR4
- PCB : Infinity Series - IF87.5 (VIA, form mechlovin)
[Kit includes]
1. 1x Case
2. 1x Weight Block
3. 1x Switch plate
4. 1x PCB
5. 1x Daughterboard with cable
6. 1x BAG
7. 1x Etc
[Price]
-. TBD some under review
over $900
#. Brass Weight
https://imgur.com/O6A9jph
Coating n UV printed
한글 , Hangul
#. More PIC.
https://imgur.com/a/lAh7ZSi
Start at next week.
discord
https://discord.gg/JUYP5eFACy
-
Over $900 lol
-
Over $900 lol
stop being poor lmao
-
Tell me why this TKL is >900USD worthy.
-
REs is where it’s at
-
Over $900 lol
A good price to pay for Kustom clout
-
Over $900 lol
stop being poor lmao
Stop being a ****head lmao
-
This costs $900+ US because it has Hangul printed on the weight?
-
price is a major oof but frankly this is a revamp of arguably one of the most sought after boards of all time so i'm not that peeved by it
i'll probably go for one if i have cash when it runs
if it's made in korea as i suspect, that adds a lot of price as well
-
Could honestly do without the printing on the weight, but that aside damn am I looking forward to this!
-
very hard pass
-
wew
-
900$ bruh
-
Interesting price at 900 dollars. :eek:
-
the price is a bit steep, getting near keycult area, dangerous waters... besides that i really like the design and the fact it's getting remastered
-
Nice remaster of the iconic board
-
This will be difficult to say no to
-
the price is a bit steep, getting near keycult area, dangerous waters... besides that i really like the design and the fact it's getting remastered
lmao Keycult area :p :p :p
-
Do we have pics of the internal or an exploded view?
-
Over $900 lol
stop being poor lmao
Stop being a ****head lmao
Sorry just laying some cold hard facts here.
-
Overpriced.
-
Over $900 lol
stop being poor lmao
Stop being a ****head lmao
Sorry just laying some cold hard facts here.
sorry to bother you but Neely was the one stating facts not you. You were just a ***hole :thumb:
-
Interesting price at 900 dollars. Wonder what the aftermarket price would be :eek:
First thought of a real keyboard enthusiast. I wonder how much I can flip this for...
-
Interesting price at 900 dollars. Wonder what the aftermarket price would be :eek:
First thought of a real keyboard enthusiast. I wonder how much I can flip this for...
Of course this the first thing ppl think about, why else woukd someone buy a hype board? :p
-
Interesting price at 900 dollars. Wonder what the aftermarket price would be :eek:
First thought of a real keyboard enthusiast. I wonder how much I can flip this for...
No, I didn't mean flipping it myself. I meant what the aftermarket might be if others flipped it.
Sorry for the confusion. Edited.
-
Beautiful board.
Sorry the trash came out to make negative comments.
-
There is no reason for this to cost 900 dollars, ****ing elitist
-
I like how this looks. Don't want to comment on the pricing, the board is a run in a small batch and it usually gets expensive.
Sent from my SM-G988U using Tapatalk
-
No engraving on the weight and I'm down.
-
I like how this looks. Don't want to comment on the pricing, the board is a run in a small batch and it usually gets expensive.
Sent from my SM-G988U using Tapatalk
You can get a full brass prototype made for 1000 usd at 2 moq. Unless they are using vibranium to make these things, the price is just not justifiable.
-
$900 price tag to be expected given OP's nick is LifeZ.
-
Is the weight going to be unfinished like the prototype?
-
aw hell no
-
are keyboards from korea all made of diamond?
-
The copium is strong with this one. Geon has shown that high quality korean boards can be offered at a reasonable price.
-
kustom clout
-
Love LZ boards but this is just too much. Sorry LZ.
-
Like Puddsy said being made in Korea definitely helps the steeper price. Whether or not that would mean $900 is justifiable is speculation so calling LZ out on it being a cash grab is sort of unnecessary - but so is saying "lol it's fine". To each their own.
I have my own opinion on which one is more likely to be correct but regardless, I'm absolutely not buying a $900+ RE.
-
I love the design but as many have said price. but another factor into that is the "starts next week". for a board so expensive it woulda been nice to have a little bit more room.
-
Like Puddsy said being made in Korea definitely helps the steeper price. Whether or not that would mean $900 is justifiable is speculation so calling LZ out on it being a cash grab is sort of unnecessary - but so is saying "lol it's fine". To each their own.
I have my own opinion on which one is more likely to be correct but regardless, I'm absolutely not buying a $900+ RE.
ya this is pretty much dead on
and i agree with sissy, a week is pretty tight notice
-
$900 is a ****ing joke for TKL.
-
RE was one of my favorite keyboard design of all time, so I was very excited about this one until the price is announced :/
-
but another factor into that is the "starts next week". for a board so expensive it woulda been nice to have a little bit more room.
This right here, lets have some more information put out first to give you and the customer more time. There are only a few pictures, no typing test, doesnt seem like you are too sure of the price with the "TBD" and overall just leaves a lot of questions for something that should start next week. Hopefully things get straightened out though and everything goes well!
-
but another factor into that is the "starts next week". for a board so expensive it woulda been nice to have a little bit more room.
This right here, lets have some more information put out first to give you and the customer more time. There are only a few pictures, no typing test, doesnt seem like you are too sure of the price with the "TBD" and overall just leaves a lot of questions for something that should start next week. Hopefully things get straightened out though and everything goes well!
(https://c.tenor.com/7BIT9N89kkEAAAAd/meme-first-time.gif)
I don't think LZ has given any of this as part of an IC for their boards in their 10~ years producing Kustoms.
-
Love LZ boards but this is just too much. Sorry LZ.
I echo this sentiment. Love LZ boards, but the price is just a lot.
GLWGB
-
Idk about this one, in some of the pictures, the anodizing looks like it has some spots. I need to see (and hear) a lot more before I could even consider dropping 900$ on a board
-
Oh snap. I didn't realize this was all going to be done over discord. Sad I missed this.
-
i absolutely love this, but the printing is just god awful.