geekhack

geekhack Community => Keyboards => Topic started by: Snackmuncher on Tue, 26 July 2022, 09:34:16

Title: Gh60 rev-C stopped working after computer restart
Post by: Snackmuncher on Tue, 26 July 2022, 09:34:16

Recently I purchased a gh60 rev-C and got it all setup. I used flip to bootload onto the board and everything was working fine. The next day when I go to use the board it doesn’t even appear on the device manager and an unknown device. I’ve tried most of what I could find including pressing the reset button on the board, any key press combinations that I saw, and connecting via different connectors and ports along with connecting to a different computer.
Does anyone know of a possible solution?

I bought the pcb from the following link:
https://techkeys.us/collections/accessories/products/gh60

Title: Re: Gh60 rev-C stopped working after computer restart
Post by: suicidal_orange on Tue, 26 July 2022, 09:43:46

Nothing in device manager when you plug it in or after pressing the button?  That's pretty dead.

Is the board safely in a case or could you have knocked a crucial power component off between shutting down and using it the next day?

Title: Re: Gh60 rev-C stopped working after computer restart
Post by: Snackmuncher on Tue, 26 July 2022, 10:23:49

It was originally in a case when it stopped working. I have since taken it out so I could access the reset button. Occasionally during my troubleshooting after making this post would I get a notification “device not recognized” after holding the reset button for 15-30 seconds, but I still was unable to find it in the device manager. There is a possibility that I messed up the usb-mini connection somehow.