geekhack

geekhack Marketplace => Interest Checks => Topic started by: CLAP_STUDIO on Tue, 30 August 2022, 09:33:28

Title: 【IC】CLAP ARTISAN WRIST REST
Post by: CLAP_STUDIO on Tue, 30 August 2022, 09:33:28
Hello Geekhackers, today I want to present you a artisan wrist rest.
(https://i.imgur.com/5JYotvH.jpg)
Front height：20MM
Length：318MM (works with most 60-65%)
Width：80MM
Typing angle：6.5°
The wrist rest can hold 13 artisans with height no higher than 14MM
(https://i.imgur.com/rRLjyrm.jpg)
The specs:
6063 Aluminum
Ano: Silver and black
PC Cap to prevent dust
Walnut wood with wood wax coat
Magnets X8 to hold the wood onto the casing
(https://i.imgur.com/DV7wBCd.jpg)(https://i.imgur.com/h7N4YMB.jpg)

Photos of the R2 Prototypes https://imgur.com/gallery/wTNrH5K (https://imgur.com/gallery/wTNrH5K)
(https://i.imgur.com/WDHMuZW.png)(https://i.imgur.com/wNjxDHO.png)

MOQ 100 sets
MSRP US 120USD+domestic shipping and tax
MSRP worldwide 100USD+international shipping and duty

Worldiwde vendor: https://keyspensory.store/ (https://keyspensory.store/)
Non US customers will be shipped directly from China

Please fill in the google forms if you are interested! https://forms.gle/5h93n1VLSocybyqm8 (https://forms.gle/5h93n1VLSocybyqm8)

Thank you!

Discord:discord.gg/C7rPhkAr3U (http://discord.gg/C7rPhkAr3U)
Instagram:https://www.instagram.com/clap__studio__/ (https://www.instagram.com/clap__studio__/)
Title: Re: 【IC】CLAP ARTISAN WRIST REST
Post by: CLAP_STUDIO on Tue, 30 August 2022, 09:34:23
Reserved :)
Title: Re: 【IC】CLAP ARTISAN WRIST REST
Post by: 360Ceeee on Tue, 30 August 2022, 10:43:35
Looks good for me
Title: Re: 【IC】CLAP ARTISAN WRIST REST
Post by: Kokaloo on Tue, 30 August 2022, 19:01:53
does this support topre artisans?
Title: Re: 【IC】CLAP ARTISAN WRIST REST
Post by: CLAP_STUDIO on Tue, 30 August 2022, 22:43:44
Quote from: Kokaloo on Tue, 30 August 2022, 19:01:53
does this support topre artisans?

The dimension for the artisans are 22*22MM with height no over 14MM
Title: Re: 【IC】CLAP ARTISAN WRIST REST
Post by: CLAP_STUDIO on Tue, 30 August 2022, 22:44:06
Quote from: 360Ceeee on Tue, 30 August 2022, 10:43:35
Looks good for me
Thank you!
Title: Re: 【IC】CLAP ARTISAN WRIST REST
Post by: Nuap on Tue, 30 August 2022, 23:10:53
Wow very nice artisan wristrest, when I get one I'll be sure to proudly let everyone know "I GOT THE CLAP".

Now for some real feedback: I can't see any easy way to remove the lid ("PC cap"). It seems like when it's in palce it'd be hard to remove without a suction cup or turning the wrist rest upside down (and therefore potentially scattering your priceless resin). Other lidded cases implement tabs in their lid that allow you to get some grip to lift them up, see the Naptime if you want an excellent example.
Title: Re: 【IC】CLAP ARTISAN WRIST REST
Post by: iNKY Studio on Tue, 30 August 2022, 23:58:12
a bao wo di shen
Title: Re: 【IC】CLAP ARTISAN WRIST REST
Post by: CLAP_STUDIO on Wed, 31 August 2022, 00:14:47
Quote from: Nuap on Tue, 30 August 2022, 23:10:53
Wow very nice artisan wristrest, when I get one I'll be sure to proudly let everyone know "I GOT THE CLAP".

Now for some real feedback: I can't see any easy way to remove the lid ("PC cap"). It seems like when it's in palce it'd be hard to remove without a suction cup or turning the wrist rest upside down (and therefore potentially scattering your priceless resin). Other lidded cases implement tabs in their lid that allow you to get some grip to lift them up, see the Naptime if you want an excellent example.

Ooooops MY BAD! I forgot to mention the suction cup that will be provided in the set! Thanks for noticing!!
I have also been thinking about implementing a small cutout on both ends of the PC cap, which might be easier for users, in case the suction cup is lost!
Thanks for the good feedbacks!
Title: Re: 【IC】CLAP ARTISAN WRIST REST
Post by: CLAP_STUDIO on Wed, 31 August 2022, 00:52:58
Quote from: iNKY Studio on Tue, 30 August 2022, 23:58:12
a bao wo di shen
Haha ai ni!
Title: Re: 【IC】CLAP ARTISAN WRIST REST
Post by: akejojo on Wed, 31 August 2022, 08:44:24
a bao li hai bang bang bang
Title: Re: 【IC】CLAP ARTISAN WRIST REST
Post by: Morbii on Thu, 01 September 2022, 15:48:08
This looks great, and I'm definitely interested depending on when the GB comes up. 

I'm with the others that mentioned a tab instead of a suction cup as being preferrable.
Title: Re: 【IC】CLAP ARTISAN WRIST REST
Post by: CLAP_STUDIO on Fri, 02 September 2022, 23:34:51
Quote from: Morbii on Thu, 01 September 2022, 15:48:08
This looks great, and I'm definitely interested depending on when the GB comes up. 

I'm with the others that mentioned a tab instead of a suction cup as being preferrable.

Thanks! And yes we'll be changing the design of the PC cap. For the GB date we're not sure just yet, we'll be sure to update! 
Title: Re: 【IC】CLAP ARTISAN WRIST REST
Post by: less_blank on Sat, 03 September 2022, 18:32:56
Looks awesome, will definitely be in for one. Only nitpicks I have are I'd prefer a completely clear window rather than slightly frosted and would prefer no logo, but I'm in either way!
Title: Re: 【IC】CLAP ARTISAN WRIST REST
Post by: CLAP_STUDIO on Tue, 06 September 2022, 00:19:50
Quote from: less_blank on Sat, 03 September 2022, 18:32:56
Looks awesome, will definitely be in for one. Only nitpicks I have are I'd prefer a completely clear window rather than slightly frosted and would prefer no logo, but I'm in either way!

Thank you for liking and the feedbacks! Will definitely consider clear PC cap option!