Is there a bottom weight?
If there is, what's the material?
GLWIC!
Very nice design. What layouts will the PCB support?
GLWIC
Looks great!
GLWIC.
Is 1.5mm PCB a mistake? Please consider using 1.6mm (or 1.2mm if you must).
Thanks for including more info on the layouts the PCB will report. That cursed hotswap PCB looks crazy.
Might want to consider updating the IC form to ask people if they have any suggestions or comments on the board (like different weights options) or to ask them which version they'd buy (e.g. hotswap, solder). Also, not sure why you're asking people for their real name on the IC.
sadly the target price is way out of my range especially if the taxes included.
anyways GLWIC
Since it's inspired by automotive design, I hope we'll get a Ferrari red option
sadly the target price is way out of my range especially if the taxes included.
anyways GLWIC
sadly the target price is way out of my range especially if the taxes included.
anyways GLWIC
I think the price is already fair, considering it's a 4-part machined case, almost impossible to get lower than this price unless the MOQ is above 500 or more
im aware and im not asking to bring the price down. im just saying its sadly impossible for me to buysadly the target price is way out of my range especially if the taxes included.I think the price is already fair, considering it's a 4-part machined case, almost impossible to get lower than this price unless the MOQ is above 500 or more
anyways GLWIC
way too expensive for an all alu board, need at least brass weight for the pricethis. nonetheless the design is very sleek and I like it a lot.
way too expensive for an all alu board, need at least brass weight for the price
way too expensive for an all alu board, need at least brass weight for the pricethis. nonetheless the design is very sleek and I like it a lot.
I dig the board. Well done, good luck!
Something I just noticed,
I think you should poll for skeleton plate, vs non. :D
I dig the board. Well done, good luck!
Something I just noticed,
I think you should poll for skeleton plate, vs non. :D
might update this, especially for flex materials such as Polycarbonate, POM, etc
The flex-cut design is for stiffer materials such as aluminum, carbon fiber, etc to make it less rigid and achieve acoustic that we desire
as stated above, the default plate will be polycarbonate but we planning to provide more materials to play with
more updates on the content will come time to time
saw the proto on instagram, INSANE
Is the intention for this board to come with an ISO compatible plate, or to offer an ISO compatible plate for for sale as an extra? I notice the prototype 3 board has an ANSI only plate installed.
Really hope this isn't going to be another instance of a board with an ISO compatible PCB, but an ANSI only plate.
BTW prototype 3 looks fantastic.
Personally I'd much prefer the cursed layout to be on the solder PCB only.
Good to see this is still alive: I thought maybe you'd lost interest and moved into the Øbliviate.
Are there more rounds of prototypes planned, or will you be progressing with a GB soon?
Any plans on european vendors? Very excited for this board. GLWIC!
been following since this was posted. really enjoy this design, especially the all black! i would prob have to opt for the all alu to achieve this.
have you thought about offering any coating/PVD for the stainless steel/copper parts? i'm good either way, just a possible option for those who want the increased weight of copper or brass.
Haha sorry to keep waiting, still not sure if we need another round of prototype, we will test it first before deciding
Can't say when the GB start for now
Any plans on european vendors? Very excited for this board. GLWIC!
No plan yet
That's fair enough. Better to get the board right than rush it. I'm expecting great things after all these interactive revisions and rounds of prototypes.
That's a shame, but understandable. Please consider it if possible.
The cursed layout is actually awesome IMO, never thought of it, but using the 2 long stabilized keys from numpad kits fits the 65% right column perfectly!
I don't mind if you don't get a European vendor in particular, but please ensure at least one vendor you get is capable of shipping to Europe! (I don't mind paying international shipping with a reputable courier like DHL or something.)
I'd absolutely love a polycarbonate one. IC done. Couldn't vote for PC in the form but that's lovely to see.
Neo 65 has same engraving on the back. Just saying.
August updates
The production sample unit is ready and currently being sent to content creators.
Upcoming content includes build streams, Instagram posts, and YouTube videos.
The group buy is still on schedule for mid to late August.
Design changes:
- We decided to change the bottom plate logo as the previous one is not distinctive with other brandShow Image(https://i.imgur.com/ijLH1jx.png)Show Image(https://i.imgur.com/rhVtbdx.png)Show Image(https://i.imgur.com/PX9D1Og.png)Show Image(https://i.imgur.com/oeMrDmi.png)Show Image(https://i.imgur.com/TVDkc9z.png)Show Image(https://i.imgur.com/DnFObmn.png)Show Image(https://i.imgur.com/FC0sLBd.png)Show Image(https://i.imgur.com/7f1XTXV.png)
Any update on PC case inserts? I plan on joining the GB, just want to confirm the PC inserts situation before I choose.
Any update on PC case inserts? I plan on joining the GB, just want to confirm the PC inserts situation before I choose.
Any update on PC case inserts? I plan on joining the GB, just want to confirm the PC inserts situation before I choose.
They updated via Discord saying they are now going to be including them. Big fat W imo. Glad they actually took community concern into consideration.