geekhack

geekhack Marketplace => Interest Checks => Topic started by: ProudCat on Sat, 03 June 2023, 22:46:21

Title: [IC] Enter80
Post by: ProudCat on Sat, 03 June 2023, 22:46:21: Hello everyone, this is Kezewa Studio. Our first product, Enter67, achieved a great success and received praise from everyone. We believe that you have confidence in our workmanship. Today, we bring you our second product, Enter80, and we hope that you will like it.
(https://imgur.com/N9izAIm.jpg)

The front design remains minimalist, with the addition of a decorative strip on the front end to add a sense of hierarchy.
(https://imgur.com/KtpU60O.jpg)

The chamfered edge from Enter67 is continued below the spacebar.
(https://imgur.com/PwZfxWH.jpg)

The back is still a simple weight, certainly there will be multiple material and craftsmanship options available.
(https://imgur.com/1C2swvL.jpg)

There are still up to 13 colors to choose from (11 anodized colors and 2 e-coating colors), so you can always find one to match for your keycaps.
More renders
Mint：
(https://imgur.com/2AO97i2.jpg)
(https://imgur.com/IAgR7yo.jpg)
(https://imgur.com/GHNji3y.jpg)
(https://imgur.com/O77kCX6.jpg)
(https://imgur.com/UPRJE73.jpg)
(https://imgur.com/79VgdOA.jpg)
(https://imgur.com/2VGjQWd.jpg)
(https://imgur.com/FBcrVFH.jpg)
(https://imgur.com/pgTAc9i.jpg)
(https://imgur.com/UPRJE73.jpg)
(https://imgur.com/9lb8tZO.jpg)
(https://imgur.com/F0ei6Ms.jpg)
(https://imgur.com/11ignP6.jpg)

Structure：
(https://imgur.com/fXo9NDX.jpg)

Keyboard dimensions (Length x Width x Height)
(https://imgur.com/KmjYiIj.jpg)

Keyboard details（standard）
1.Case：6063 aluminum; Weight：copper（sandblast）
2.Decorative strip（choose from the same 13colors as the keyboard）
3.Plate：PC
4.Pcb：Single-mode （1.2mm with flexcut or 1.6mm without flexcut）
5.Typing angle: 7 degrees
6.Mounting method: Gasket + Top
7.Pack bag
8.Plate stabilizers 4+1
9.Accessories：gasket sockets sockets、all kinds of cottons、feet rubber、screwdriver、dustcloth.
10.Ecoating edition add 15 USD

Keyboard extras：
1、Weight：①Stainless steel（sandblast silver、black、and colouful）
②Stainless steel（PVD silver、black、colourful）
2、PCB：triple-mode（wire、Bluetooth、2.4G）
3、Plate：Aluminum、Fr4、Pom
4、Extra Decorative stripe

Price：
(https://imgur.com/hZet8SC.jpg)

More details will be released soon.

(https://i.imgur.com/joBZPuY.png)

Join Discord：https://discord.gg/RQ44F8WHRe

KEZEWA: https://kezewa.com/
Title: Re: [IC] Enter80
Post by: yi first on Sat, 03 June 2023, 23:30:00: When will it be on the website? Looking forward to it :)
Title: Re: [IC] Enter80
Post by: DirtyGingy on Sat, 03 June 2023, 23:47:50: What is the price estimate?
Title: Re: [IC] Enter80
Post by: aicyborg on Sun, 04 June 2023, 19:41:04: I'd like to see a lot more layout flexibility. A solder PCB and universal plate for stuff like ISO, split RShift, and split BS would be really good - much more important than 6.25u bottom row I think.
Title: Re: [IC] Enter80
Post by: Kevinsunbo on Mon, 05 June 2023, 05:11:34: Quote from: DirtyGingy on Sat, 03 June 2023, 23:47:50
What is the price estimate?
still TBD but maybe around 200 due to different configuration
Title: Re: [IC] Enter80
Post by: Kevinsunbo on Mon, 05 June 2023, 05:12:37: Quote from: aicyborg on Sun, 04 June 2023, 19:41:04
I'd like to see a lot more layout flexibility. A solder PCB and universal plate for stuff like ISO, split RShift, and split BS would be really good - much more important than 6.25u bottom row I think.
Yeah layout is important，and the layouts you said are all supported
Title: Re: [IC] Enter80
Post by: ktechs on Mon, 05 June 2023, 06:29:14: can't wait. let's get this out there!
Title: Re: [IC] Enter80
Post by: aicyborg on Tue, 06 June 2023, 21:59:43: Quote from: Kevinsunbo on Mon, 05 June 2023, 05:12:37
Quote from: aicyborg on Sun, 04 June 2023, 19:41:04
I'd like to see a lot more layout flexibility. A solder PCB and universal plate for stuff like ISO, split RShift, and split BS would be really good - much more important than 6.25u bottom row I think.
Yeah layout is important，and the layouts you said are all supported

Can you provide a graphic of the layout options that'll be supported on the plate and PCB, please? It looks like it's fixed ANSI with no flexibility for splits from the photos shown.
Title: Re: [IC] Enter80
Post by: ppatches24 on Wed, 07 June 2023, 01:26:46: No way!!

My Enter67 came in a few weeks ago and its a 10/10 board, surface finish far exceeded my expectations. The coffee color is AMAZING!

I looking very forward to the Enter 80.

Will there be different color options for that top bar?
Title: Re: [IC] Enter80
Post by: Bacms on Wed, 07 June 2023, 03:17:37: If this supports hot swap ISO than I will take part. Would be nice to understand what is and what isn't supported at this stage
Title: Re: [IC] Enter80
Post by: Kevinsunbo on Thu, 08 June 2023, 06:02:36: Quote from: ktechs on Mon, 05 June 2023, 06:29:14
can't wait. let's get this out there!
haha got it.
Title: Re: [IC] Enter80
Post by: Kevinsunbo on Thu, 08 June 2023, 06:03:38: Quote from: ppatches24 on Wed, 07 June 2023, 01:26:46
No way!!

My Enter67 came in a few weeks ago and its a 10/10 board, surface finish far exceeded my expectations. The coffee color is AMAZING!

I looking very forward to the Enter 80.

Will there be different color options for that top bar?
Absolutely yes. Really glad you like it.
Title: Re: [IC] Enter80
Post by: Kevinsunbo on Thu, 08 June 2023, 06:04:11: Quote from: Bacms on Wed, 07 June 2023, 03:17:37
If this supports hot swap ISO than I will take part. Would be nice to understand what is and what isn't supported at this stage
WIll add a graphic layout
Title: Re: [IC] Enter80
Post by: Formulaw00t on Fri, 09 June 2023, 14:21:41: #8 says plate stabilizers, is that correct or did you mean PCB stabilizers?

Thanks!
Title: Re: [IC] Enter80
Post by: Kevinsunbo on Fri, 09 June 2023, 23:20:27: Quote from: Formulaw00t on Fri, 09 June 2023, 14:21:41
#8 says plate stabilizers, is that correct or did you mean PCB stabilizers?

Thanks!
Plate stablizer will be included in the keeb，that means we will send buyers one. And it surely support pcb stablizer as well.
Title: Re: [IC] Enter80
Post by: givemecopper on Thu, 22 June 2023, 03:01:48: When will you start the GB?
Title: Re: [IC] Enter80
Post by: ppatches24 on Fri, 23 June 2023, 20:26:32: Will we be able to order extras of the strips that go on top of the board? I cant decide between two colors?
Title: Re: [IC] Enter80
Post by: HotFishsoup on Tue, 27 June 2023, 11:04:53: I love the chamfered edge on the top frame, it lets me have a slightly lower wrist rest to compliment it.
Title: Re: [IC] Enter80
Post by: ppatches24 on Wed, 28 June 2023, 05:07:46: now to decide on white or light green for the upcoming domikey jade set.
Title: Re: [IC] Enter80
Post by: ProudCat on Thu, 29 June 2023, 22:11:29: Quote from: ppatches24 on Fri, 23 June 2023, 20:26:32
Will we be able to order extras of the strips that go on top of the board? I cant decide between two colors?

We will provide multiple colors for matching
Title: Re: [IC] Enter80
Post by: ProudCat on Wed, 05 July 2023, 23:11:34: Quote from: givemecopper on Thu, 22 June 2023, 03:01:48
When will you start the GB?
We will start GB within this month. :)
Title: Re: [IC] Enter80
Post by: RiverL on Thu, 13 July 2023, 05:46:44: So looking forward to it :thumb:
Title: Re: [IC] Enter80
Post by: bigmaxnonions on Thu, 13 July 2023, 06:51:41: Will there be a WKL version? Also, will PCB be VIA/QMK compatible?
Title: Re: [IC] Enter80
Post by: ProudCat on Wed, 19 July 2023, 06:52:15: Quote from: RiverL on Thu, 13 July 2023, 05:46:44
So looking forward to it :thumb:

:D :D ;D ;D
Title: Re: [IC] Enter80
Post by: aicyborg on Thu, 20 July 2023, 23:29:00: Please review the graphic you've added which shows layout support. The bottommost demonstration of your supported bottom row is 0.25u too wide. Furthermore, please label that bottom with exactly how wide your non-standard spacebars will be so people can establish what they need to have to use it.
Title: Re: [IC] Enter80
Post by: ProudCat on Sat, 22 July 2023, 09:10:42: Quote from: aicyborg on Thu, 20 July 2023, 23:29:00
Please review the graphic you've added which shows layout support. The bottommost demonstration of your supported bottom row is 0.25u too wide. Furthermore, please label that bottom with exactly how wide your non-standard spacebars will be so people can establish what they need to have to use it.

Thank you very much for your suggestion.We will review and revise it.
Title: Re: [IC] Enter80
Post by: ppatches24 on Sun, 23 July 2023, 01:05:50: Will the orange be an option to buy?
Title: Re: [IC] Enter80
Post by: ProudCat on Sun, 23 July 2023, 06:57:21: Quote from: ppatches24 on Sun, 23 July 2023, 01:05:50
Will the orange be an option to buy?

Yes,the orange option will be retained and can be purchased.
Title: Re: [IC] Enter80
Post by: ppatches24 on Mon, 24 July 2023, 02:13:42: Quote from: ProudCat on Sun, 23 July 2023, 06:57:21
Quote from: ppatches24 on Sun, 23 July 2023, 01:05:50
Will the orange be an option to buy?

Yes,the orange option will be retained and can be purchased.

AWESOME! Thank you!
Title: Re: [IC] Enter80
Post by: Michi4793 on Sat, 29 July 2023, 14:40:43: Discord link says expired, can you send a new one? The board looks interesting
Title: Re: [IC] Enter80
Post by: ProudCat on Mon, 31 July 2023, 00:50:34: Quote from: Michi4793 on Sat, 29 July 2023, 14:40:43
Discord link says expired, can you send a new one? The board looks interesting

We have updated the address of discord.
Title: Re: [IC] Enter80
Post by: ProudCat on Mon, 07 August 2023, 00:25:16: ;D ;D ;D ;D ;D
Title: Re: [IC] Enter80
Post by: RiverL on Thu, 10 August 2023, 22:47:35: Quote from: ProudCat on Mon, 07 August 2023, 00:25:16
;D ;D ;D ;D ;D
You have any update? :rolleyes: :rolleyes: :rolleyes:
Title: Re: [IC] Enter80
Post by: garynguyen on Thu, 10 August 2023, 23:13:31: Do we have 3 modes version in the future? I have an Enter67 R2 and dont want to upgrade to R3 (3 modes). Considering this one if it has 3 modes.
Title: Re: [IC] Enter80
Post by: ProudCat on Tue, 15 August 2023, 09:03:51: Quote from: garynguyen on Thu, 10 August 2023, 23:13:31
Do we have 3 modes version in the future? I have an Enter67 R2 and dont want to upgrade to R3 (3 modes). Considering this one if it has 3 modes.

Yes,we will have 3 modes version in the future.
Title: Re: [IC] Enter80
Post by: givemecopper on Mon, 11 September 2023, 22:11:16: Can you start the Group Buy this September?