geekhack
geekhack Marketplace => Interest Checks => Topic started by: AIRPOTTER on Thu, 26 March 2026, 23:54:44
-
Hello everyone! Long time no see! :)
This time, we're bringing another product from G·works series, which is the first model in this in-stock series: Infinite 70.
Exterior Design
At the front corners, we've tried a design treatment different from before this time:
At the intersection of the three three-dimensional surfaces and the edge chamfer, we've used right-angle chamfers to attempt a brand new visual style.
(https://i.imgur.com/n1oprhF.jpeg)
The beveled badge at the top of the arrow keys echoes the front corners, paired with light strips at the center and chamfered edges of the badge, enhancing recognizability when lit.
(https://i.imgur.com/XAtLMoP.jpeg)
The weight extends from the overall form, creating a floating hollowed-out effect, and is accented with two small decorative light strips to enhance the visual layers.
(https://i.imgur.com/WczcAqI.jpeg)
On the bottom surface, decorative lines that extend the visual effect are added to the weight area, further enhancing the overall texture through enriched detail elements.
(https://i.imgur.com/RSSyh7T.jpeg)
Structure Design
The internal uses a bridge-style gasket. During typing, pressure from the fingertips deforms the bridge-style gasket, enabling downward travel and rebound.
(https://i.imgur.com/L56POwl.jpeg)
The INFINITE 70 has a firmer feel, but the tuning is softer than the Space82, with better consistency.
At the same time, to pursue a balanced, cohesive typing feel, after many scheme adjustments, we ultimately decided to adopt a 1.2mm non-flexcut PCB + leaf-spring mounting plate combination.
This solution, while maintaining sufficient support, achieves the consistency and solidity we expected, and the tactile performance meets expectations.
Layout
(https://i.imgur.com/odyZGJq.png)
Typing Angle / Dimensions
(https://i.imgur.com/HNVqUIJ.jpeg)
Front height: 19.60mm
Typing Angle：7°
Colorways
Anodized: Quicksilver,Top gun,Darth Vader,Peach Pink,Burgundy,Tyraels
Electrophoresis: Storm,Khaki
Powder Coating: Concrete,Gravel,Tara,Skyline,Barley,Sunset Glow,Hibiscus,Rock ash,Meteorite,Raspberry Pink.
PCB
Wired 1.2mm (no flexcut), multi-layout hot-swap (ZH), split magnetic daughterboard
with ESD protection, supports VIAL (VIA-required files provided).
Plate
FR4 / PC / Aluminum / Carbon Fiber
Contents
* 1x Case (top case, badge, bottom case, weight frame, weight, back badge)
* 1x Plate
* 1x PCB(1.2mm thick PCB Motherboard with Magnetic Daughterboard)
* 1x Poron vibration reduction plate foam（3.5mm）
* 1x ixPE PCB foam（0.5mm）
* 1x Noise reduction case foam（2mm）
* 1x Electrostatics Insulation Foam（0.1mm）
* 1x Set of gaskets (12 Bridge gaskets)
* 1x Updated screwdriver (Graystudio brand) * 1x tweezer (always test the PCB before soldering!)
* Extra Screws, rubber feet
* Other Accessories
Partial prototype photos
(https://i.imgur.com/7wf4zDj.jpeg)
(https://i.imgur.com/9ep6cxI.jpeg)
Quick silver
(https://i.imgur.com/l9fQKdB.jpeg)
(https://i.imgur.com/a3urxRG.jpeg)
Darth Vader
(https://i.imgur.com/BwapLZO.jpeg)
(https://i.imgur.com/i8KTwqc.jpeg)
Peach Pink
(https://i.imgur.com/LdBSGFB.jpeg)
(https://i.imgur.com/EeHylpI.jpeg)
Burgundy
(https://i.imgur.com/sLbCQnc.jpeg)
(https://i.imgur.com/T1dVWbF.jpeg)
Storm
(https://i.imgur.com/gUzExY9.jpeg)
(https://i.imgur.com/zaMdK5Y.jpeg)
Khaki
(https://i.imgur.com/FflDJAw.jpeg)
(https://i.imgur.com/CMOXOo6.jpeg)
Tara
(https://i.imgur.com/JpKXpL8.jpeg)
(https://i.imgur.com/ez9pqpw.jpeg)
Sunset Glow
(https://i.imgur.com/ImuXZ0e.jpeg)
(https://i.imgur.com/yAyLkJJ.jpeg)
Concrete
(https://i.imgur.com/R4aQaos.jpeg)
(https://i.imgur.com/9FGd63S.jpeg)
Meteorite