geekhack
geekhack Community => Keyboards => Topic started by: Lethal Squirrel on Sat, 29 October 2011, 11:24:22
-
So, Let me start of byy sayying, everyyything in this is typed out as normal. every double letter yyou see is happening on it's own. so, What can I do about this problem, I've tried blowing it with air, and re soldering the switch. Is there anyything else I can do besides replacing the switch?
-
It looks like it's just your y key. Maybe try disassembling the switch and covering the contact with rubbing alcohol? That could potentially clear out anything bumming around down there.
-
If it is only the "y' switch then a new one is only $2.
-
I fixed it :D
never thought of desoldering the switch and taking it apart.
-
How'd you fix it?
-
I fixed it :D
never thought of desoldering the switch and taking it apart.
How'd you fix it?
*blink*
-
So in 17 minutes you went from typing a post on the keyboard, to having it immediately disassembled, got out your soldering tools, heated up the iron, de-soldered the switch, took it apart, figured out what was wrong, fixed it, put the switch back together, re-soldered it back on, and reassembled the keyboard, logged back on GH to post that reply? Damn I wish I was this efficient.
-
How'd you fix it?
I fixed it :D
never thought of desoldering the switch and taking it apart.
*blink*
I assume it was PCB-mounted, then.
Glad you were able to fix it
-
So in 17 minutes you went from typing a post on the keyboard, to having it immediately disassembled, got out your soldering tools, heated up the iron, de-soldered the switch, took it apart, figured out what was wrong, fixed it, put the switch back together, re-soldered it back on, and reassembled the keyboard, logged back on GH to post that reply? Damn I wish I was this efficient.
It's really not that involved. I could do it in 10 minutes if pressed.
-
So in 17 minutes you went from typing a post on the keyboard, to having it immediately disassembled, got out your soldering tools, heated up the iron, de-soldered the switch, took it apart, figured out what was wrong, fixed it, put the switch back together, re-soldered it back on, and reassembled the keyboard, logged back on GH to post that reply? Damn I wish I was this efficient.
Yes I did.
I have one of those instantly hot soldering iron gun things. I desoldered it, popped open the switch, cleaned it with rubbing alcohol and a Q-tip, blew it out with compressed air, and soldered it back on.
took about 15 minutes
-
Hoorah! I was basically right! Though I don't think I would take a q-tip to it. If cleaning CPU heatsinks has taught me anything, it's that q-tips like to leave particulate matter and fibers wherever they go. But if it works, no harm done!
-
That's why I blew it out afterwards ;)
-
How could I forget: canned air solves everything.